K-T transition in Deccan Traps of central India marks major marine Seaway across India

Deccan intertrappean sediments in central India are generally considered as terrestrial deposits of Maastrichtian age, but the Cretaceous-Tertiary (K-T) position is still unknown. Here we report the discovery of the K-T transition, a marine incursion and environmental changes preserved within the intertrappean sediments at Jhilmili, Chhindwara District, Madhya Pradesh. Integrative biostratigraphic, sedimentologic, mineralogic and chemostratigraphic analyses reveal the basal Danian in the intertrappean sediments between lower and upper trap basalts that regionally correspond to C29r and the C29R/C29N transition, respectively. Intertrappean deposition occurred in predominantly terrestrial semi-humid to and environments. But a short aquatic interval of fresh water ponds and lakes followed by shallow coastal marine conditions with brackish marine ostracods and early Danian zone P1a planktic foraminifera mark this interval very close to the K-T boundary. This marine incursion marks the existence of a nearby seaway, probably extending inland from the west through the Narmada and Tapti rift valleys. The Jhilmili results thus identify the K-T boundary near the end of the main phase of Deccan eruptions and indicate that a major seaway extended at least 800 km across India. (C) 2009 Elsevier B.V. All rights reserved.

Tectonic and metamorphic evolution of the Central Himalayan Domain in Southeast Zanskar (Kashmir, India)

La région du Zanskar, étudiée dans le cadre de ce travail, se situe au passage entre deux domaines himalayens fortement contrastés, la Séquence Cristalline du Haut Himalaya (HHCS), composée de roches métamorphiques et l'Himalaya Tethysien (TH), composé de séries sédimentaires. La transition entre ces deux domaines est marquée par une structure tectonique majeure, la Zone de Cisaillement du Zanskar (ZSZ), au sein de laquelle on observe une augmentation extrêmement rapide, mais néanmoins graduelle, du degré du métamorphisme entre le TH et le HHCS. Il a été établi que le HHCS n'est autre que l'équivalent métamorphique des séries sédimentaires de la base du TH. C'est principalement lors d'un épisode de mise en place de nappes à vergence sudouest, entre l'Eocène moyen et l'Oligocène, que les séries sédimentaires de la base du TH ont été entraînées en profondeur où elles ont subi un métamorphisme de type barrovien. Au début du Miocène, le HHCS à été exhumé en direction du sud-ouest sous forme d'une grande nappe, délimitée a sa base par le MCT (principal chevauchement central) et à son sommet par la Zone de Cisaillement du Zanskar. L'ensemble des zones barroviennes, de la zone à biotite jusqu'à la zone à disthène, a été cisaillée par les mouvements en faille normale au sommet du HHCS et se retrouve actuellement sur une épaisseur d'environ 1 kilomètre au sein de la ZSZ. La décompression associée à l'exhumation du HHCS a provoqué la fusion partielle d'une partie du HHCS et a donné naissance à des magmas de composition leucogranitiques. Grâce à la géothermobarometrie, et connaissant la géométrie de la ZSZ, il nous a été possible de déterminer que le rejet le long de cette structure d'extension est d'au moins 35?9 kilomètres. Une série d'arguments nous permet cependant de suggérer que ce rejet aurait pu être encore bien plus important (~100km). Les données géochronologiques nous permettent de contraindre la durée des mouvements d'extension le long de la ZSZ à 2.4?0.2 Ma entre 22.2?0.2 Ma et 19.8?0.1 Ma. Ce travail apporte de nouvelles données sur les processus métamorphiques, magmatiques et tectoniques liés aux phénomènes d'extension syn-orogeniques.<br/><br/>The southeastern part of Zanskar is located at the transition between two major Himalayan domains of contrasting metamorphic grade, the High Himalayan Crystalline Sequence (HHCS) and the Tethyan Himalaya (TH). The transition between the TH and the HHCS is marked by a very rapid, although perfectly gradual, decrease in metamorphic grade, which coincides with a major tectonic structure, the Zanskar Shear Zone (ZSZ). It is now an established fact that the relation between the HHCS and the TH is not one of basement-cover type, but that the metasedimentary series of the HHCS represent the metamorphic equivalent of the lowermost sedimentary series of the TH. This transformation of sedimentary series into metamorphic rocks, and hence the differentiation between the TH and the HHCS, is the consequence of crustal thickening associated to the formation of large scale southwest vergent nappes within the Tethyan Himalaya sedimentary series. This, Middle Eocene to Oligocene, episode of crustal thickening and associated Barrovian metamorphism is followed, shortly after, by the exhumation of the HHCS as a, large scale, south-west vergent, nappe. Foreword The exhumation of the HHCS nappe is marked by the activation of two contemporaneous structures, the Main Central Thrust at its base and the Zanskar Shear Zone at its top. Extensional movements along the ZSZ, caused the Barrovian biotite to the kyanite zones to be sheared and constricted within the ~1 km thick shear zone. Decompression associated with the exhumation of the HHCS induced the formation of leucogranitic magmas through vapour-absent partial melting of the highest-grade rocks. The combination of geothermobarometric data with a geometric model of the ZSZ allowed us to constrain the net slip at the top of the HHCS to be at least 35?9 kilometres. A set of arguments however suggests that these movements might have been much more important (~ 100 km). Geochronological data coupled with structural observations constrain the duration of ductile shearing along the ZSZ to 2.4?0.2 Ma between 22.2?0.2 Ma and 19.8?0.1 Ma. This study also addresses the consequences of synorogenic extension on the metamorphic, tectonic and magmatic evolution of the upper parts of the High Himalayan Crystalline Sequence.

Tectonic evolution of the High Himalaya in upper Lahul (NW Himalaya, India)

The Upper Lahul region in the NW Himalaya is located in the transition zone between the High Himalayan Crystalline (HHC) to the SW and the Tethyan Zone sedimentary series to the NE. The tectonic evolution of these domains during the Himalayan Orogeny is the consequence of a succession of five deformation events. An early D1 phase corresponds to synmetamorphic, NE verging folding. This deformation created the Tandi Syncline, which consists of Permian to Jurassic Tethyan metasediments cropping out in the core of a large-scale synformal fold within the HHC paragneiss. This tectonic event is interpreted as related to a NE directed nappe stacking (Shikar Beh Nappe), probably during the late Eocene to the early Oligocene. A subsequent D2a phase caused SW verging folding in the HHC. This deformation is interpreted as contemporaneous with late Oligocene to early Miocene SW directed thrusting along the Main Central Thrust. In the Tethyan Zone, a D2b phase is marked by a decollement thrust, a system of reverse faults, and gentle folds, associated with SW directed tectonic movements. This deformation is related to an imbricate structure, characteristic of a shallow structural level, and developed in the frontal part of a nappe affecting the Tethyan Zone units of SE Zanskar (Nyimaling-Tsarap Nappe). A later D3 phase generated the Chandra Dextral Shear Zone (CDSZ), a large-scale, ductile, dextral strike-slip shear zone, located in the transition zone between the HHC and the Tethyan Himalaya. The CDSZ most likely represents a part of a system of early Miocene extensional and/or dextral, strike-slip shear zones-observed at the HHC-Tethyan Zone contact along the entire Himalaya. A final D4 phase induced large-scale doming and NE:verging back folding.

Structural and metamorphic evolution of the northern Himachal Himalaya, NW India - (Spiti-eastern Lahul-Parvati valley traverse)

The Himalayan orogen is the result of the collision between the Indian and Asian continents that began 55-50 Ma ago, causing intracontinental thrusting and nappe formation. Detailed mapping as well as structural and microfabric analyses on a traverse from the Tethyan Himalaya southwestward through the High Himalayan Crystalline and the Main Central Thrust zone (MCT zone) to the Lesser Himalayan Sequence in the Spiti-eastern Lahul-Parvati valley area reveal eight main phases of deformation, a series of late stage phases and five stages of metamorphic crystallization. This sequence of events is integrated into a reconstruction of the tectonometamorphic evolution of the Himalayan orogen in northern Himachal Pradesh. The oldest phase D-1 is preserved as relies in the High Himalayan Crystalline. Its deformational conditions are poorly known, but the metamorphic evolution is well documented by a prograde metamorphism reaching peak conditions within the upper amphibolite facies. This indicates that D-1 was an important tectonometamorphic event including considerable crustal thickening. The structural, metamorphic and sedimentary record suggest that D-1 most probably represents an early stage of continental collision. The first event clearly attributed to the collision between India and Asia is documented by two converging nappe systems, the NE-verging Shikar Beh Nappe and the SW-verging north Himalayan nappes. The D-2 Shikar Beh Nappe is characterized by isoclinal folding and top-to-the NE shearing, representing the main deformation in the High Himalayan Crystalline. D-2 also caused the main metamorphism in the High Himalayan Crystalline that was of a Barrovian-type, reaching upper amphibolite facies peak conditions. The Shikar Beh Nappe is interpreted to have formed within the Indian crust SW of the subduction zone. Simultaneously with NE-directed nappe formation, incipient subduction of India below Asia caused stacking of the SW-verging north Himalayan Nappes, that were thrust from the northern edge of the subducted continent toward the front of the Shikar Beh Nappe. As a result, the SW-verging folds of the D-3 Main Fold Zone formed in the Tethyan Himalaya below the front of the north Himalayan nappes. D-3 represents the main deformation in the Tethyan Himalaya, associated with a greenschist facies metamorphism. Folding within the Main Fold Zone subsequently propagated toward SW into the High Himalayan Crystalline, where it overprinted the preexisting D-2 structures. After subduction at the base of the north Himalayan nappes, the subduction zone stepped to the base of the High Himalayan Crystalline, where D-3 folds were crosscut by SW-directed D-4 thrusting. During D-4, the Crystalline Nappe, comprising the Main Fold Zone and relies of the Shikar Beh Nappe was thrust toward SW over the Lesser Himalayan Sequence along the 4 to 5 kms thick Main Central Thrust zone. Thrusting was related to a retrograde greenschist facies overprint at the base of the Crystalline Nappe and to pro-grade greenschist facies conditions in the Lesser Himalayan Sequence. Simultaneously with thrusting at the base of the Crystalline Nappe, higher crustal levels were affected by NE-directed D-5 normal extensional shearing and by dextral strike-slip motion, indicating that the high-grade metamorphic Crystalline Nappe was extruded between the low-grade metamorphic Lesser Himalayan Sequence at the base and the north Himalayan nappes at the top. The upper boundary of the Crystalline Nappe is not clearly delimited and passes gradually into the low-grade rocks at the front of the north Himalayan nappes. Extrusion of the Crystalline Nappe was followed by the phase D-6, characterized by large-scale, upright to steeply inclined, NE-verging folds and by another series of normal and extensional structures D-7+D-8 that may be related to ongoing extrusion of the Crystalline Nappe. The late stage evolution is represented by the phases D-A and D-B that indicate shortening parallel to the axis of the mountain chain and by D-C that is interpreted to account for the formation of large-scale domes with NNW-SSE-trending axes, an example of which is exposed in the Larji-Kullu-Rampur tectonic window.

State power and protected areas: Dynamics and contradictions of forest conservation in Madhya Pradesh, India

The traditionally coercive and state-controlled governance of protected areas for nature conservation in developing countries has in many cases undergone change in the context of widespread decentralization and liberalization. This article examines an emerging "mixed" (coercive, community- and market-oriented) conservation approach in managed-resource protected areas and its effects on state power through a case study on forest protection in the central Indian state of Madhya Pradesh. The findings suggest that imperfect decentralization and partial liberalization resulted in changed forms, rather than uniform loss, of state power. A forest co-management program paradoxically strengthened local capacity and influence of the Forest Department, which generally maintained its territorial and knowledge-based control over forests and timber management. Furthermore, deregulation and reregulation enabled the state to withdraw from uneconomic activities but also implied reduced place-based control of non-timber forest products. Generally, the new policies and programs contributed to the separation of livelihoods and forests in Madhya Pradesh. The article concludes that regulatory, community- and market-based initiatives would need to be better coordinated to lead to more effective nature conservation and positive livelihood outcomes.

The Dutung-Thaktote extensional fault zone and nappe structures documented by illite crystallinity and clay-mineral paragenesis in the Tethys Himalaya between Spiti river and Tso Morari, NW India

Numerous measurements by XRD of the Scherrer width at half-peak height (001 reflection of illite), coupled with analyses of clay-size assemblages, provide evidence for strong variations in the conditions of low temperature metamorphism in the Tethyan Himalaya metasediments between the Spiti river and the Tso Morari. Three sectors can be distinguished along the Spiti river-Tso Morari transect. In the SW, the Takling and Parang La area is characterised by a metamorphism around anchizone-epizone boundary conditions. Further north, in the Dutung area, the metamorphic grade abruptly decreases to weak diagenesis, with the presence of mixed-layered clay phases. At the end of the profile towards the NE, a progressive metamorphic increase up to greenschist facies is recorded, marked by the appearance of biotite and chloritoid. The combination of these data with the structural. observations permits to propose that a nappe stack has been crosscut by the younger Dutung-Thaktote extensional fault zone (DTFZ). The change in metamorphism across this zone helps to assess the displacements which occurred during synorogenic extension. In the SW and NE parts of the studied transect, a burial of 12 km has been estimated, assuming a geothermal gradient of 25 degrees C/km. In the SW part, this burial is due to the juxtaposition of the Shikar Beh and Mata nappes and in the NE part, solely to burial beneath the Mata nappe. In the central part of the profile, the effect of the DTFZ is to bring down diagenetic sediments in-between the two aforesaid metamorphic zones. The offset along the Dutung-Thaktote normal faults is estimated at 16 km.

The Teggiolo zone: a key to the Helvetic-Penninic connection (stratigraphy and tectonics in the Val Bavona, Ticino, Central Alps)

The Teggiolo zone is the sedimentary cover of the Antigorio nappe, one of the lowest tectonic units of the Penninic Central Alps. Detailed mapping, stratigraphic and structural analyses, and comparisons with less metamorphic series in several well-studied domains of the Alps, provide a new stratigraphic interpretation. The Teggiolo zone is comprised of several sedimentary cycles, separated by erosive surfaces and large stratigraphic gaps, which cover the time span from Triassic to Eocene. At Mid-Jurassic times it appears as an uplifted, partially emergent block, marking the southern limit of the main Helvetic basin (the Limiting South-Helvetic Rise LSHR). The main mass of the Teggiolo calcschists, whose base truncates the Triassic-Jurassic cycles and can erode the Antigorio basement, consists of fine-grained clastic sediments analogous to the deep-water flyschoid deposits of Late Cretaceous to Eocene age in the North-Penninic (or Valais s.l.) basins. Thus the Antigorio-Teggiolo domain occupies a crucial paleogeographic position, on the boundary between the Helvetic and Penninic realms: from Triassic to Early Cretaceous its affinity is with the Helvetic; at the end of Cretaceous it is incorporated into the North-Penninic basins. An unexpected result is the discovery of the important role played by complex formations of wildflysch type at the top of the Teggiolo zone. They contain blocks of various sizes. According to their nature, three different associations are distinguished that have specific vertical and lateral distributions. These blocks give clues to the existence of territories that have disappeared from the present-day level of observation and impose constraints on the kinematics of early folding and embryonic nappe emplacement. Tectonics produced several phases of superimposed folds and schistosities, more in the metasediments than in the gneissic basement. Older deformations that predate the amplification of the frontal hinge of the nappe generated the dominant schistosity and the km-wide Vanzèla isoclinal fold.

The role of a transcrustal shear zone in orogenic gold mineralization at the Aijanahalli Mine, Dharwar Craton, South India

The Ajjanahalli gold mine is spatially associated with a Late Archean craton-scale shear zone in the eastern Chitradurga greenstone belt of the Dharwar craton, India. Gold mineralization is hosted by an similar to100-m-wide antiform in a banded iron formation. Original magnetite and siderite are replaced by a peak metamorphic alteration assemblage of chlorite, stilpnomelane, minnesotaite, sericite, ankerite, arsenopyrite, pyrite, pyrrhotite, and gold at ca. 300degrees to 350degreesC. Elements enriched in the banded iron formation include Ca, Mg, C, S, An, As, Bi. Cu, Sb, Zn, Pb, Se, Ag, and Te, whereas in the wall rocks As, Cu, Zn, Bi, Ag, and An are only slightly enriched. Strontium correlates with CaO, MgO, CO2, and As, which indicates cogenetic formation of arsenopyrite and Mg-Ca carbonates. The greater extent of alteration in the Fe-rich banded iron formation layers than in the wall rock reflects the greater reactivity of the banded iron formation layers. The ore fluids, as interpreted from their isotopic composition (delta(18)O = 6.5-8.5parts per thousand; initial Sr-87/Sr-86 = 0.7068-0.7078), formed by metamorphic devolatilization of deeper levels of the Chitradurga greenstone belt. Arsenopyrite, chalcopyrite, and pyrrhotite have delta(34)S values within a narrow range between 2.1 and 2.7 per mil, consistent with a sulfur source in Chitradurga greenstone belt lithologies. Based on spatial and temporal relationships between mineralization, local structure development, and sinistral strike-slip deformation in the shear zone at the eastern contact of the Chitradurga greenstone belt, we suggest that the Ajjanahalli gold mineralization formed by fluid infiltration into a low strain area within the first-order structure. The ore fluids were transported along this shear zone into relatively shallow crustal levels during lateral terrane accretion and a change from thrust to transcurrent tectonics. Based on this model of fluid flow, exploration should focus on similar low strain areas or potentially connected higher order splays of the first-order shear zone.

New Sorex araneus karyotypes from Germany and the postglacial recolonization of central Europe

New G-banded karyotypes from populations of the common shrew Sorex araneus Linnaeus, 1758 provide a clearer picture of the distribution of chromosome races in central Europe. As expected according to their occurrence in neighbouring countries, the Jutland (kq, no), Laska (k/o) and Drnholec (ko, nr) races are also found in Germany. A new chromosome race "Rugen" (kq) is described from this Baltic Island. Together with the previously recorded races Ulm and Mooswald (kr), six chromosome races are now known from Germany. The resulting distribution pattern is characterized by high frequencies of different race-specific metacentrics at the periphery of the country and clines with decreasing frequencies towards the centre which is occupied by the Ulm race. This race is acrocentric for all chromosome arms involved in the observed race-specific fusions and represents a buffer between the surrounding, more metacentric races. According to the present distribution of these metacentrics, a scenario for the postglacial recolonization of central Europe by S. araneus populations on three different routes is proposed: from the east along the northern slopes of the Carpathian Arc, from the south-east along the Danube Valley and from the south-west through the Upper Rhine Valley.

GLUTX1, a novel mammalian glucose transporter expressed in the central nervous system and insulin-sensitive tissues.

Based on homology with GLUT1-5, we have isolated a cDNA for a novel glucose transporter, GLUTX1. This cDNA encodes a protein of 478 amino acids that shows between 29 and 32% identity with rat GLUT1-5 and 32-36% identity with plant and bacterial hexose transporters. Unlike GLUT1-5, GLUTX1 has a short extracellular loop between transmembrane domain (TM) 1 and TM2 and a long extracellular loop between TM9 and TM10 that contains the only N-glycosylation site. When expressed in Xenopus oocytes, GLUTX1 showed strong transport activity only after suppression of a dileucine internalization motif present in the amino-terminal region. Transport activity was inhibited by cytochalasin B and partly competed by D-fructose and D-galactose. The Michaelis-Menten constant for glucose was approximately 2 mM. When translated in reticulocytes lysates, GLUTX1 migrates as a 35-kDa protein that becomes glycosylated in the presence of microsomal membranes. Western blot analysis of GLUTX1 transiently expressed in HEK293T cells revealed a diffuse band with a molecular mass of 37-50 kDa that could be converted to a approximately 35-kDa polypeptide following enzymatic deglycosylation. Immunofluorescence microscopy detection of GLUTX1 transfected into HEK293T cells showed an intracellular staining. Mutation of the dileucine internalization motif induced expression of GLUTX1 at the cell surface. GLUTX1 mRNA was detected in testis, hypothalamus, cerebellum, brainstem, hippocampus, and adrenal gland. We hypothesize that, in a similar fashion to GLUT4, in vivo cell surface expression of GLUTX1 may be inducible by a hormonal or other stimulus.

Marbles and carbonate rocks from central Morocco: a petrographic, mineralogical and geochemical study

Petrographic, mineralogical, and stable isotopes (delta C-13, delta O-18 values) compositions were used to characterise marbles and sedimentary carbonate rocks from central Morocco, which are considered to be a likely source of ornamental and building material from Roman time to the present day. This new data set was used in the frame of an archaeometric provenance study on Roman artefacts from the town of Thamusida (Kenitra, north Morocco), to assess the potential employment of these rocks for the manufacture of the archaeological materials. A representative set of samples from marbles and other carbonate rocks (limestone, dolostone) were collected in several quarries and outcrops in the Moroccan Meseta, in a region extending from the Meknes-Khenifra alignment to the Atlantic Ocean. All the samples were studied using a petrographic, mineralogical and geochemical methods. The petrographic and minerological investigations (optical microscopy, electron microscopy, X-ray diffraction) allowed to group the carbonate rocks in limestones, foliated limestone, diagenetic breccias and dolostone. The limestones could be further grouped as mudstones, wackestones-packstones, crinoid grainstones, oolitic grainstone and floatstones. Textural differences allowed to define marbles varieties. The stable carbon and oxygen isotope composition proved to be quite useful in the discrimination of marble sources, with apparently less discriminatory potential for carbonate rocks.

Treatment of central retinal vein occlusion-related macular edema with intravitreal bevacizumab (Avastin): preliminary results.

PURPOSE: To assess the safety and efficacy of treatment of macular edema secondary to central retinal vein occlusion (CRVO) with intravitreal bevacizumab. PATIENTS AND METHOD: The ongoing prospective study included 8 consecutive patients (8 eyes) with macular edema secondary to CRVO (6 non ischemic and 2 ischemic), treated with intravitreal injection of 1.25 mg (0.05 mL) of bevacizumab. Main outcome was best corrected visual acuity (BCVA) and central foveal thickness (CFT) measured by optical coherence tomography monthly during one year. Retreatment criteria include decrease of BCVA, persistence of macular edema on angiograms and increase of CFT. RESULTS: Mean age of the eight patients was 68 years (range: 50-82 years). Mean duration of symptoms before injection was 98 days (range: 3-289). Mean follow-up was 3.25 months. At baseline, mean BCVA was 0.84 logMar and mean baseline CFT was 771 microm. Mean BCVA was 0.36 and mean CFT thickness was 275 microm (n = 8) at month 1, 0.41 and 411 microm at month 2 (n = 7), 0.3 and 344 microm at month 3 (n = 6), 0.3 and 397 microm at month 4 (n = 5), respectively. In 75 % of patients, a single injection was not sufficient, and retreatment needed. No serious adverse events were observed. CONCLUSIONS: Treatment of macular edema secondary to CRVO with intravitreal bevacizumab injection of 1.25 mg was well tolerated and associated with marked macular thickness reduction and BCVA improvement in all patients. A trend towards reduction of foveal thickness and improvement of visual acuity was observed in both acute and chronic CRVO.