NanoImpactNet - building a multi-stakeholder dialogue on the health and environmental impact of nanomaterials

NanoImpactNet (NIN) is a multidisciplinary European Commission funded network on the environmental, health and safety (EHS) impact of nanomaterials. The 24 founding scientific institutes are leading European research groups active in the fields of nanosafety, nanorisk assessment and nanotoxicology. This 4-year project is the new focal point for information exchange within the research community. Contact with other stakeholders is vital and their needs are being surveyed. NIN is communicating with 100s of stakeholders: businesses; internet platforms; industry associations; regulators; policy makers; national ministries; international agencies; standard-setting bodies and NGOs concerned by labour rights, EHS or animal welfare. To improve this communication, internet research, a questionnaire distributed via partners and targeted phone calls were used to identify stakeholders' interests and needs. Knowledge gaps and the necessity for further data mentioned by representatives of all stakeholder groups in the targeted phone calls concerned: • the potential toxic and safety hazards of nanomaterials throughout their lifecycles; • the fate and persistence of nanoparticles in humans, animals and the environment; • the associated risks of nanoparticle exposure; • greater participation in: the preparation of nomenclature, standards, methodologies, protocols and benchmarks; • the development of best practice guidelines; • voluntary schemes on responsibility; • databases of materials, research topics and themes, but also of expertise. These findings suggested that stakeholders and NIN researchers share very similar knowledge needs, and that open communication and free movement of knowledge will benefit both researchers and industry. Subsequently a workshop was organised by NIN focused on building a sustainable multi-stakeholder dialogue. Specific questions were asked to different stakeholder groups to encourage discussions and open communication. 1. What information do stakeholders need from researchers and why? The discussions about this question confirmed the needs identified in the targeted phone calls. 2. How to communicate information? While it was agreed that reporting should be enhanced, commercial confidentiality and economic competition were identified as major obstacles. It was recognised that expertise was needed in the areas of commercial law and economics for a wellinformed treatment of this communication issue. 3. Can engineered nanomaterials be used safely? The idea that nanomaterials are probably safe because some of them have been produced 'for a long time', was questioned, since many materials in common use have been proved to be unsafe. The question of safety is also about whether the public has confidence. New legislation like REACH could help with this issue. Hazards do not materialise if exposure can be avoided or at least significantly reduced. Thus, there is a need for information on what can be regarded as acceptable levels of exposure. Finally, it was noted that there is no such thing as a perfectly safe material but only boundaries. At this moment we do not know where these boundaries lie. The matter of labelling of products containing nanomaterials was raised, as in the public mind safety and labelling are connected. This may need to be addressed since the issue of nanomaterials in food, drink and food packaging may be the first safety issue to attract public and media attention, and this may have an impact on 'nanotechnology as a whole. 4. Do we need more or other regulation? Any decision making process should accommodate the changing level of uncertainty. To address the uncertainties, adaptations of frameworks such as REACH may be indicated for nanomaterials. Regulation is often needed even if voluntary measures are welcome because it mitigates the effects of competition between industries. Data cannot be collected on voluntary bases for example. NIN will continue with an active stakeholder dialogue to further build on interdisciplinary relationships towards a healthy future with nanotechnology.

Indoor air quality in a public building following smoking bans

Introduction: Exposure to environmental tobacco smoke (ETS) is a major environmental risk factor. Indoor contaminants come from a variety of sources, which can include inadequate ventilation, volatile organic compounds (VOCs), biological agents, combustion products, and ETS. Because ETS is one of the most frequent causes of IAQ complaints as well as the high mortality of passive smoking, in June 2004 the University of Geneva made the decision to ban smoking inside the so called "Uni-Mail" building, the biggest Swiss University human science building of recent construction, and the ordinance was applied beginning in October 2004. This report presents the finding related to the IAQ of the "Uni-Mail" building before and after smoking bans using nicotine, suspended dust, condensate and PAHs level in air as tracers to perform an assessment of passive tobacco exposure for non-smokers inside the building. Methods: Respirable particles (RSP) A real time aerosol monitor (model DataRAM)was place at sampling post 1, level ground floor. Condensate It consists in extracting any organic matter taken on the glass fibre filters by MeOH, and then measuring the total absorbent of the MeOH extract to the UV wavelength of 447 nm. Nicotine Nicotine was taken by means of cartridges containing of XAD-4 to the fixed flow of 0.5 L/min. The analytical method used for the determination of nicotine is based on gas chromatography with Nitrogen selective detector GC-NPD. Results: Figure 1 shows the box plot density display of 3 parameters before and after smoking bans for all 7 sampling posts: dust, condensate and nicotine in air in μg/m3. Conclusion: Before the smoking ban, the level of the concentrations of respirable particles (RSP) is raised more, average of the day 320 μg/m3, with peaks of more than 1000 μg/m3, compared with the values of the surrounding air between 22 and 30 μg/m3. The nicotine level is definitely more important (average 5.53 μg/m3, field 1.5 to 17.9 μg/m3). Once the smoking bans inside the building were applied, one notes a clear improvement in terms of concentrations of pollutants. For dust, the concentration fell by 3 times (average: 130 μg/m3, range: 40 to 160 μg/m3) and that of nicotine by 10 times (average: 0.53 μg/m3, range: 0 to 1.69 μg/m3) compared to that found before smoking bans. The outdoor air RSP concentration was 22 μg/m3 or 10 times lower. Nicotine seems to be the best tracer for ETS free of interference, independent of location or season.

Estrogenic activity assessment of environmental chemicals using in vitro assays: identification of two new estrogenic compounds.

Environmental chemicals with estrogenic activities have been suggested to be associated with deleterious effects in animals and humans. To characterize estrogenic chemicals and their mechanisms of action, we established in vitro and cell culture assays that detect human estrogen receptor [alpha] (hER[alpha])-mediated estrogenicity. First, we assayed chemicals to determine their ability to modulate direct interaction between the hER[alpha] and the steroid receptor coactivator-1 (SRC-1) and in a competition binding assay to displace 17ss-estradiol (E(2)). Second, we tested the chemicals for estrogen-associated transcriptional activity in the yeast estrogen screen and in the estrogen-responsive MCF-7 human breast cancer cell line. The chemicals investigated in this study were o,p'-DDT (racemic mixture and enantiomers), nonylphenol mixture (NPm), and two poorly analyzed compounds in the environment, namely, tris-4-(chlorophenyl)methane (Tris-H) and tris-4-(chlorophenyl)methanol (Tris-OH). In both yeast and MCF-7 cells, we determined estrogenic activity via the estrogen receptor (ER) for o,p'-DDT, NPm, and for the very first time, Tris-H and Tris-OH. However, unlike estrogens, none of these xenobiotics seemed to be able to induce ER/SRC-1 interactions, most likely because the conformation of the activated receptor would not allow direct contacts with this coactivator. However, these compounds were able to inhibit [(3)H]-E(2) binding to hER, which reveals a direct interaction with the receptor. In conclusion, the test compounds are estrogen mimics, but their molecular mechanism of action appears to be different from that of the natural hormone as revealed by the receptor/coactivator interaction analysis.

The 2005 Pakistan earthquake revisited: Methods for integrated landslide assessment

Five years after the 2005 Pakistan earthquake that triggered multiple mass movements, landslides continue to pose a threat to the population of Azad Kashmir, especially during heavy monsoon rains. The thousands of landslides that were triggered by the 7.6 magnitude earthquake in 2005 were not just due to a natural phenomenon but largely induced by human activities, namely, road building, grazing, and deforestation. The damage caused by the landslides in the study area (381 km2) is estimated at 3.6 times the annual public works budget of Azad Kashmir for 2005 of US$ 1 million. In addition to human suffering, this cost constitutes a significant economic setback to the region that could have been reduced through improved land use and risk management. This article describes interdisciplinary research conducted 18 months after the earthquake to provide a more systemic approach to understanding risks posed by landslides, including the physical, environmental, and human contexts. The goal of this research is twofold: to present empirical data on the social, geological, and environmental contexts in which widespread landslides occurred following the 2005 earthquake; and, second, to describe straightforward methods that can be used for integrated landslide risk assessments in data-poor environments. The article analyzes limitations of the methodologies and challenges for conducting interdisciplinary research that integrates both social and physical data. This research concludes that reducing landslide risk is ultimately a management issue, based in land use decisions and governance.

Mercury analysis in hair: comparability and quality assessment within the transnational COPHES/DEMOCOPHES project

Human biomonitoring (HBM) is an effective tool for assessing actual exposure to chemicals that takes into account all routes of intake. Although hair analysis is considered to be an optimal biomarker for assessing mercury exposure, the lack of harmonization as regards sampling and analytical procedures has often limited the comparison of data at national and international level. The European-funded projects COPHES and DEMOCOPHES developed and tested a harmonized European approach to Human Biomonitoring in response to the European Environment and Health Action Plan. Herein we describe the quality assurance program (QAP) for assessing mercury levels in hair samples from more than 1800 mother-child pairs recruited in 17 European countries. To ensure the comparability of the results, standard operating procedures (SOPs) for sampling and for mercury analysis were drafted and distributed to participating laboratories. Training sessions were organized for field workers and four external quality-assessment exercises (ICI/EQUAS), followed by the corresponding web conferences, were organized between March 2011 and February 2012. ICI/EQUAS used native hair samples at two mercury concentration ranges (0.20-0.71 and 0.80-1.63) per exercise. The results revealed relative standard deviations of 7.87-13.55% and 4.04-11.31% for the low and high mercury concentration ranges, respectively. A total of 16 out of 18 participating laboratories the QAP requirements and were allowed to analyze samples from the DEMOCOPHES pilot study. Web conferences after each ICI/EQUAS revealed this to be a new and effective tool for improving analytical performance and increasing capacity building. The procedure developed and tested in COPHES/DEMOCOPHES would be optimal for application on a global scale as regards implementation of the Minamata Convention on Mercury.

Scenario-based assessment of future land use change on butterfly species distributions

Species distribution models (SDMs) are increasingly used to predict environmentally induced range shifts of habitats of plant and animal species. Consequently SDMs are valuable tools for scientifically based conservation decisions. The aims of this paper are (1) to identify important drivers of butterfly species persistence or extinction, and (2) to analyse the responses of endangered butterfly species of dry grasslands and wetlands to likely future landscape changes in Switzerland. Future land use was represented by four scenarios describing: (1) ongoing land use changes as observed at the end of the last century; (2) a liberalisation of the agricultural markets; (3) a slightly lowered agricultural production; and (4) a strongly lowered agricultural production. Two model approaches have been applied. The first (logistic regression with principal components) explains what environmental variables have significant impact on species presence (and absence). The second (predictive SDM) is used to project species distribution under current and likely future land uses. The results of the explanatory analyses reveal that four principal components related to urbanisation, abandonment of open land and intensive agricultural practices as well as two climate parameters are primary drivers of species occurrence (decline). The scenario analyses show that lowered agricultural production is likely to favour dry grassland species due to an increase of non-intensively used land, open canopy forests, and overgrown areas. In the liberalisation scenario dry grassland species show a decrease in abundance due to a strong increase of forested patches. Wetland butterfly species would decrease under all four scenarios as their habitats become overgrown

Bacterial community structure of a pesticide-contaminated site and assessment of changes induced in community structure during bioremediation.

The introduction of culture-independent molecular screening techniques, especially based on 16S rRNA gene sequences, has allowed microbiologists to examine a facet of microbial diversity not necessarily reflected by the results of culturing studies. The bacterial community structure was studied for a pesticide-contaminated site that was subsequently remediated using an efficient degradative strain Arthrobacter protophormiae RKJ100. The efficiency of the bioremediation process was assessed by monitoring the depletion of the pollutant, and the effect of addition of an exogenous strain on the existing soil community structure was determined using molecular techniques. The 16S rRNA gene pool amplified from the soil metagenome was cloned and restriction fragment length polymorphism studies revealed 46 different phylotypes on the basis of similar banding patterns. Sequencing of representative clones of each phylotype showed that the community structure of the pesticide-contaminated soil was mainly constituted by Proteobacteria and Actinomycetes. Terminal restriction fragment length polymorphism analysis showed only nonsignificant changes in community structure during the process of bioremediation. Immobilized cells of strain RKJ100 enhanced pollutant degradation but seemed to have no detectable effects on the existing bacterial community structure.

Rehabilitation needs assessment in persons with spinal cord injury following the 2010 earthquake in Haiti: a pilot study using an ICF-based tool.

OBJECTIVE: The aim of this pilot study was to describe problems in functioning and associated rehabilitation needs in persons with spinal cord injury after the 2010 earthquake in Haiti by applying a newly developed tool based on the International Classification of Functioning, Disability and Health (ICF). DESIGN: Pilot study. SUBJECTS: Eighteen persons with spinal cord injury (11 women, 7 men) participated in the needs assessment. Eleven patients had complete lesions (American Spinal Injury Association Impairment Scale; AIS A), one patient had tetraplegia. METHODS: Data collection included information from the International Spinal Cord Injury Core Data Set and a newly developed needs assessment tool based on ICF Core Sets. This tool assesses the level of functioning, the corresponding rehabilitation need, and required health professional. Data were summarized using descriptive statistics. RESULTS: In body functions and body structures, patients showed typical problems following spinal cord injury. Nearly all patients showed limitations and restrictions in their activities and participation related to mobility, self-care and aspects of social integration. Several environmental factors presented barriers to these limitations and restrictions. However, the availability of products and social support were identified as facilitators. Rehabilitation needs were identified in nearly all aspects of functioning. To address these needs, a multidisciplinary approach would be needed. CONCLUSION: This ICF-based needs assessment provided useful information for rehabilitation planning in the context of natural disaster. Future studies are required to test and, if necessary, adapt the assessment.

Les symbioses industrielles : une nouvelle stratégie pour l'amélioration de l'utilisation des ressources matérielles et énergétiques par les activités économiques

RésuméCette thèse traite d'un domaine d'application de l'écologie industrielle, les symbioses industrielles, comme stratégie d'amélioration de la consommation des ressources matérielles et énergétiques et de la gestion des déchets par les activités économiques. Les symbioses industrielles cherchent à créer de nouvelles collaborations directement entre les acteurs économiques d'un territoire dans le but d'échanger de l'information, des matières premières et des déchets, et d'intensifier les mutualisations de services et d'infrastructures possibles entre entreprises voisines. Ces quatre types de collaboration sont représentés schématiquement dans la figure ci-dessous.Dans ce travail, la détection et la mise en oeuvre de symbioses industrielles sont abordées sous plusieurs angles. Les recherches réalisées concernent le développement de procédures de mise en oeuvre s'adressant aux collectivités publiques, aux institutions académiques et aux bureaux de conseil dans le domaine de l'environnement. Les objectifs des procédures sont de créer une dynamique de collaboration et de confiance entre les acteurs économiques et l'administration publique d'un territoire afin de détecter des symbioses industrielles potentielles. Ces procédures requièrent la gestion de grandes quantités d'informations relatives aux flux de matière et d'énergie.Un travail de terrain, réalisé sur les territoires du canton de Genève et de Lausanne Région et utilisé comme études de cas, a permis de mettre en évidence un grand nombre de symbioses industrielles qui existent déjà en Suisse romande. Plusieurs dizaines d'exemples ont été identifiés principalement dans lesdomaines de la gestion de l'eau, de l'énergie, des produits chimiques et des matériaux de construction. La législation suisse autoriserait cependant la concrétisation de nombreuses autres opportunités. Dans cette recherche, celles-ci sont évaluées techniquement, légalement, économiquement et environnementalement. La création d'un référentiel d'évaluation des opportunités permet de déterminer quelles sont les symbioses industrielles techniquement réalisables et pertinentes dans le contexte suisse et dans quels cas celles-ci représenteraient une réelle plus-value par rapport à l'utilisation actuelle de la ressource et aux filières existantes de collecte et de valorisation des déchets.Finalement, un logiciel, SymbioGIS, destiné à soutenir la détection et l'évaluation de symbioses industrielles potentielles a été développé. Il s'agit d'une interface web accessible pour de nombreux utilisateurs, couplée à une interface de systèmes d'information géographique. En plus de la détection de symbioses industrielles, plusieurs fonctionnalités sont proposées pour faciliter la prise en compte des flux de matière et d'énergie dans les problématiques liées à l'aménagement du territoire et au positionnement des activités économiques.En conclusion, cette recherche met en évidence la nécessité de rapprocher les institutions publiques en charge de la protection de l'environnement, de la promotion économique et de l'aménagement du territoire pour favoriser l'essor des symbioses industrielles comme stratégie pour la gestion des ressources matérielles et énergétiques. Elle propose des pistes pour intensifier les collaborations entre ces domaines et accélérer le partage des connaissances liées aux flux de matière et d'énergie et à leur cheminement au sein des activités économiques afin de rendre le système industriel existant en Suisse romande viable à long terme. Parallèlement, elle étudie les possibilités de transposer ces considérations et les procédures et outils développés dans le contexte économique et social de la région Asie-Pacifique, où se trouvent aujourd'hui de nombreuses activités de production.SummaryIndustrial symbioses: A new strategy for improving how economic activities use material and energy resourcesThis thesis focuses on one application of industrial ecology, industrial symbioses, as a strategy for improving how economic activities consume material and energy resources. Industrial symbioses seek to create new collaborations among economic players with the goal of exchanging information, raw materials, and waste directly among area businesses, and to step up the potential pooling of services and infrastructure among neighboring companies.The identification and implementation of industrial symbioses are studied from several angles. The research first examines the development of implementation procedures for government bodies, academic institutions, and environmental consulting services. The purpose of the procedures is to create a dynamic of collaboration and trust between the economic players and the public officials in a region in order to identify potential industrial symbioses. The procedures necessitate managing large amounts of information about material and energy flows.Fieldwork conducted in the canton of Geneva and the Lausanne region, and used as case studies for the research, highlights a great number of industrial symbioses that already exist in French-speaking Switzerland. Several dozen examples are identified, primarily in the areas of water management, energy, chemical products, and building materials; however, Swiss law would permit many others. The research evaluates these opportunities from a technical, legal, economic, and environmental standpoint. By developing an assessment framework it is possible to determine which industrial symbioses are technically feasible and pertinent in Switzerland, and under what circumstances they would represent real added value compared to the current use of the resource and to existing systems for collecting and reusing waste.Lastly, SymbioGIS software was developed to help identify and assess potential industrial symbioses. The program's Web-based interface can be accessed by multiple users and is coupled with an interface that provides geographic information. In addition to identifying industrial symbioses, several program functionalities make it easier to consider material and energy flows with regard to local development issues and siting economic activities.In conclusion, the research highlights the need to bring together public institutions charged with protecting the environment, promoting economic activity, and overseeing development in order to foster the expansion of industrial symbioses as a strategy for managing material and energy resources. It proposes solutions for stepping up collaboration among these players and accelerating the sharing of knowledge about material and energy flows and their paths within economic activities with the goal of making theexisting industrial system in French-speaking Switzerland viable long-term. Also examined were thepossibilities of transposing these considerations and the study's findings about Switzerland to the economic and social context of the Asia-Pacific region, where much production is now located.