Improvement of the HIV/AIDS vaccine candidate NYVAC-C by deletion of the viral type I IFN inhibitor and/or acquisition of replication competence

Background: Recombinant viruses based on the attenuated vaccinia virus strain NYVAC are promising HIV vaccine candidates as phase I/II clinical trials have shown good safety and immunogenicity profiles. However, this NYVAC strain is non-replicating in most human cell lines and encodes viral inhibitors of the immune system. Methods: With the aim to increase the immune potency of the current NYVAC-C vector (expressing the codon optimized clade C HIV-1 genes encoding gp120 and Gag-Pol-Nef polyprotein), we have generated and characterized three NYVAC-C-based vectors by, 1) deletion of the viral type I IFN inhibitor gene (NYVAC-CdeltaB19R), 2) restoration of virus replication competence in human cells by re-inserting K1L and C7L host range genes (NYVAC-C-KC) and, 3) combination of both strategies (NYVACC- KC-deltaB19R). Results: Insertion of the KC fragment restored the replication competence of the viruses in human cells (HeLa cells and primary dermal fibroblasts and keratinocytes), increased the expression of HIV antigens by more than 3-fold compared to the non-replicating homologs, inhibited apoptosis induced by the parental NYVAC-C and retained attenuation in a newborn mouse model. In adult mice, replication-competent viruses showed a limited capacity to replicate in tissues surrounding the inoculation site (ovaries and lymph nodes). After infection of keratinocytes, PBMCs and dendritic cells these viruses induced differential modulation in specific host cell signal transduction pathways, triggering genes important in immune modulation. Conclusion: We have developed improved NYVAC-C-based vectors with enhanced HIV-1 antigen expression, with the ability to replicate in cultured human cells and partially in some tissues, with an induced expression of cellular genes relevant to immune system activation, and which trigger IFN-dependent and independent signalling pathways, while maintaining a safety phenotype. These new vectors are promising new HIV vaccine candidates. These studies were performed within the Poxvirus Tcell Vaccine Discovery Consortium (PTVDC) which is part of the CAVD program.

Can one or two high doses of oral vitamin D3 correct insufficiency in a non-supplemented rheumatologic population?

We evaluated the effectiveness of supplementation with high dose of oral vitamin D3 to correct vitamin D insufficiency. We have shown that one or two oral bolus of 300,000 IU of vitamin D3 can correct vitamin D insufficiency in 50% of patients and that the patients who benefited more from supplementation were those with the lowest baseline levels. INTRODUCTION: Adherence with daily oral supplements of vitamin D3 is suboptimal. We evaluated the effectiveness of a single high dose of oral vitamin D3 (300,000 IU) to correct vitamin D insufficiency in a rheumatologic population. METHODS: Over 1 month, 292 patients had levels of 25-OH vitamin D determined. Results were classified as: deficiency <10 ng/ml, insufficiency ≥10 to 30 ng/ml, and normal ≥30 ng/ml. We added a category using the IOM recommended cut-off of 20 ng/ml. Patients with deficient or normal levels were excluded, as well as patients already supplemented with vitamin D3. Selected patients (141) with vitamin D insufficiency (18.5 ng/ml (10.2-29.1) received a prescription for 300,000 IU of oral vitamin D3 and were asked to return after 3 (M3) and 6 months (M6). Patients still insufficient at M3 received a second prescription for 300,000 IU of oral vitamin D3. Relation between changes in 25-OH vitamin D between M3 and M0 and baseline values were assessed. RESULTS: Patients (124) had a blood test at M3. Two (2%) had deficiency (8.1 ng/ml (7.5-8.7)) and 50 (40%) normal results (36.7 ng/ml (30.5-5.5)). Seventy-two (58%) were insufficient (23.6 ng/ml (13.8-29.8)) and received a second prescription for 300,000 IU of oral vitamin D3. Of the 50/124 patients who had normal results at M3 and did not receive a second prescription, 36 (72%) had a test at M6. Seventeen (47%) had normal results (34.8 ng/ml (30.3-42.8)) and 19 (53%) were insufficient (25.6 ng/ml (15.2-29.9)). Of the 72/124 patients who receive a second prescription, 54 (75%) had a test at M6. Twenty-eight (52%) had insufficiency (23.2 ng/ml (12.8-28.7)) and 26 (48%) had normal results (33.8 ng/ml (30.0-43.7)). At M3, 84% patients achieved a 25-OH vitamin D level >20 ng/ml. The lowest the baseline value, the highest the change after 3 months (negative relation with a correlation coefficient r = -0.3, p = 0.0007). CONCLUSIONS: We have shown that one or two oral bolus of 300,000 IU of vitamin D3 can correct vitamin D insufficiency in 50% of patients.

Are there two species of Pygmy Shrews (Sorex)? Revisiting the question using DNA sequence data

Pygmy Shrews in North America have variously been considered to be one species (Sorex hoyi) or two species (S. hoyi and S. thompsoni). Currently, only S. hoyi is recognized. In this study, we examine mitochondrial DNA sequence data for the cytochrome b gene to evaluate the level of differentiation and phylogeographic relationships among eleven samples of Pygmy Shrews from across Canada. Pygmy Shrews from eastern Canada (i.e., Ontario, Quebec, New Brunswick, Nova Scotia, and Prince Edward Island) are distinct from Pygmy Shrews from western Canada (Alberta, Yukon) and Alaska. The average level of sequence divergence between these clades (3.3%) falls within the range of values for other recognized pairs of sister species of shrews. A molecular clock based on third position transversion substitutions suggests that these two lineages diverged between 0.44 and 1.67 million years ago. These molecular phylogenetic data. combined with a reinterpretation of previously published morphological data, are suggestive of separate species status for S. hoyi and S. thompsoni as has been previously argued by others. Further analysis of specimens from geographically intermediate areas (e.g., Manitoba. northern Ontario) is required to determine if there is secondary contact and/or introgression between these two putative species.

Decoupled post-glacial history in mutualistic plant-insect interactions: insights from the yellow loosestrife (Lysimachia vulgaris) and its associated oil-collecting bees (Macropis europaea and M-fulvipes)

AimWe take a comparative phylogeographical approach to assess whether three species involved in a specialized oil-rewarding pollination system (i.e. Lysimachia vulgaris and two oil-collecting bees within the genus Macropis) show congruent phylogeographical trajectories during post-glacial colonization processes. Our working hypothesis is that within specialized mutualistic interactions, where each species relies on the co-occurrence of the other for survival and/or reproduction, partners are expected to show congruent evolutionary trajectories, because they are likely to have followed parallel migration routes and to have shared glacial refugia. LocationWestern Palaearctic. MethodsOur analysis relies on the extensive sampling of 104 Western Palaearctic populations (totalling 434, 159 and 74 specimens of Lysimachiavulgaris, Macropiseuropaea and Macropisfulvipes, respectively), genotyped with amplified fragment length polymorphism. Based on this, we evaluated the regional genetic diversity (Shannon diversity and allele rarity index) and genetic structure (assessed using structure, population networks, isolation-by-distance and spatial autocorrelation metrics) of each species. Finally, we compared the general phylogeographical patterns obtained. ResultsContrary to our expectations, the analyses revealed phylogeographical signals suggesting that the investigated organisms demonstrate independent post-glacial trajectories as well as distinct contemporaneous demographic parameters, despite their mutualistic interaction. Main conclusionsThe mutualistic partners investigated here are likely to be experiencing distinct and independent evolutionary dynamics because of their contrasting life-history traits (e.g. dispersal abilities), as well as distinct hubs and migration routes. Such conditions would prevent and/or erase any signature of co-structuring of lineages in space and time. As a result, the lack of phylogeographical congruence driven by differences in life-history traits might have arisen irrespective of the three species having shared similar Pleistocene glacial refugia.

Ecologie industrielle de l'aluminium, flux de matières et d'énergie : réalités et enjeux du recyclage

Dans les dernières années du 20ème siècle, l'aluminium a fait l'objet de beaucoup de communications outrancières et divergentes cautionnées par des scientifiques et des organismes faisant autorité. En 1986, la société PECHINEY le décrète perpétuel tel le mouvement « L'aluminium est éternel. Il est recyclable indéfiniment sans que ses propriétés soient altérées », ce qui nous avait alors irrité. Peu de temps après, en 1990, une communication tout aussi outrancière et irritante d'une grande organisation environnementale, le World Wild Fund, décrète que « le recyclage de l'aluminium est la pire menace pour l'environnement. Il doit être abandonné ». C'est ensuite à partir de la fin des années 1990, l'explosion des publications relatives au développement durable, le bien mal nommé. Au développement, synonyme de croissance obligatoire, nous préférons société ou organisation humaine et à durable, mauvaise traduction de l'anglais « sustainable », nous préférons supportable : idéalement, nous aurions souhaité parler de société durable, mais, pour être compris de tous, nous nous sommes limités à parler dorénavant de développement supportable. Pour l'essentiel, ces publications reconnaissent les très graves défauts de la métallurgie extractive de l'aluminium à partir du minerai et aussi les mérites extraordinaires du recyclage de l'aluminium puisqu'il représente moins de 10% de la consommation d'énergie de la métallurgie extractive à partir du minerai (on verra que c'est aussi moins de 10% de la pollution et du capital). C'est précisément sur le recyclage que se fondent les campagnes de promotion de l'emballage boisson, en Suisse en particulier. Cependant, les données concernant le recyclage de l'aluminium publiées par l'industrie de l'aluminium reflètent seulement en partie ces mérites. Dans les années 1970, les taux de croissance de la production recyclée sont devenus plus élevés que ceux de la production électrolytique. Par contre, les taux de recyclage, établis à indicateur identique, sont unanimement tous médiocres comparativement à d'autres matériaux tels le cuivre et le fer. Composante de l'industrie de l'aluminium, le recyclage bénéficie d'une image favorable auprès du grand public, démontrant le succès des campagnes de communication. A l'inverse, à l'intérieur de l'industrie de l'aluminium, c'est une image dévalorisée. Les opinions émises par tous les acteurs, commerçants, techniciens, dirigeants, encore recueillies pendant ce travail, sont les suivantes : métier de chiffonnier, métier misérable, métier peu technique mais très difficile (un recycleur 15 d'aluminium n'a-t-il pas dit que son métier était un métier d'homme alors que celui du recycleur de cuivre était un jeu d'enfant). A notre avis ces opinions appartiennent à un passé révolu qu'elles retraduisent cependant fidèlement car le recyclage est aujourd'hui reconnu comme une contribution majeure au développement supportable de l'aluminium. C'est bien pour cette raison que, en 2000, l'industrie de l'aluminium mondiale a décidé d'abandonner le qualificatif « secondaire » jusque là utilisé pour désigner le métal recyclé. C'est en raison de toutes ces données discordantes et parfois contradictoires qu'a débuté ce travail encouragé par de nombreuses personnalités. Notre engagement a été incontestablement facilité par notre connaissance des savoirs indispensables (métallurgie, économie, statistiques) et surtout notre expérience acquise au cours d'une vie professionnelle menée à l'échelle mondiale dans (recherche et développement, production), pour (recherche, développement, marketing, stratégie) et autour (marketing, stratégie de produits connexes, les ferro-alliages, et concurrents, le fer) de l'industrie de l'aluminium. Notre objectif est de faire la vérité sur le recyclage de l'aluminium, un matériau qui a très largement contribué à faire le 20ème siècle, grâce à une revue critique embrassant tous les aspects de cette activité méconnue ; ainsi il n'y a pas d'histoire du recyclage de l'aluminium alors qu'il est plus que centenaire. Plus qu'une simple compilation, cette revue critique a été conduite comme une enquête scientifique, technique, économique, historique, socio-écologique faisant ressortir les faits principaux ayant marqué l'évolution du recyclage de l'aluminium. Elle conclut sur l'état réel du recyclage, qui se révèle globalement satisfaisant avec ses forces et ses faiblesses, et au-delà du recyclage sur l'adéquation de l'aluminium au développement supportable, adéquation largement insuffisante. C'est pourquoi, elle suggère les thèmes d'études intéressant tous ceux scientifiques, techniciens, historiens, économistes, juristes concernés par une industrie très représentative de notre monde en devenir, un monde où la place de l'aluminium dépendra de son aptitude à satisfaire les critères du développement supportable. ABSTRACT Owing to recycling, the aluminium industry's global energetic and environmental prints are much lower than its ore extractive metallurgy's ones. Likewise, recycling will allow the complete use of the expected avalanche of old scraps, consequently to the dramatic explosion of aluminium consumption since the 50's. The recycling state is characterized by: i) raw materials split in two groups :one, the new scrap, internal and prompt, proportional to semi-finished and finished products quantities, exhibits a fairly good and regular quality. The other, the old scrap, proportional to the finished products arrivïng at their end-of--life, about 22 years later on an average, exhibits a variable quality depending on the collect mode. ii) a poor recycling rate, near by that of steel. The aluminium industry generates too much new internal scrap and doesn't collect all the availa~e old scrap. About 50% of it is not recycled (when steel is recycling about 70% of the old scrap flow). iii) recycling techniques, all based on melting, are well handled in spite of aluminium atiiníty to oxygen and the practical impossibility to purify aluminium from any impurity. Sorting and first collect are critical issues before melting. iv) products and markets of recycled aluminium :New scraps have still been recycled in the production lines from where there are coming (closed loop). Old scraps, mainly those mixed, have been first recycled in different production lines (open loop) :steel deoxidation products followed during the 30's, with the development of the foundry alloys, by foundry pieces of which the main market is the automotive industry. During the 80's, the commercial development of the beverage can in North America has permitted the first old scrap recycling closed loop which is developing. v) an economy with low and erratic margins because the electrolytic aluminium quotation fixes scrap purchasing price and recycled aluminium selling price. vi) an industrial organisation historically based on the scrap group and the loop mode. New scrap is recycled either by the transformation industry itself or by the recycling industry, the remelter, old scrap by the refiner, the other component of the recycling industry. The big companies, the "majors" are often involved in the closed loop recycling and very seldom in the open loop one. To-day, aluminium industry's global energetic and environmental prints are too unbeara~ e and the sustainaЫe development criteria are not fully met. Critical issues for the aluminium industry are to better produce, to better consume and to better recycle in order to become a real sustainaЫe development industry. Specific issues to recycling are a very efficient recycling industry, a "sustainaЫe development" economy, a complete old scrap collect favouring the closed loop. Also, indirectly connected to the recycling, are a very efficient transformation industry generating much less new scrap and a finished products industry delivering only products fulfilling sustainaЫe development criteria.

Bosentan and/or Sildenafil for non-operable chronic thromboembolic pulmonary hypertension

Objectives: To evaluate outcome of patients treated "off-label" by bosentan and/or sildenafil for chronic thromboembolic pulmonary hypertension (CTEPH). Patients and methods: Since 2003, 18 patients (mean age 69 ± 11 years) have been treated with bosentan and/or sildenafil for CTEPH (mean pulmonary arterial resistance 8.1 ± 3.7 U Wood) in Lausanne University Hospital, with a follow-up of at least 12 months. Sixteen of them were inoperable because of distal disease and/or age or significant co-morbidities and 2 had persistent or recurrent pulmonary hypertension despite surgery. Efficacy of treatment was evaluated by comparison of New York Heart Association functional class (NYHA), six-minute walk test (6-MWT) and serum levels of N-terminal-pro brain natriuretic peptide (NT pro-BNP) at baseline (T0) and at 12 months (T12). Wilcoxon rank test was used for statistics. Results: At T0, median NYHA class was III (range II-IV), 6-MWT was 348 meters (5 and 95 centiles:0, 539) and NT pro-BNP was 387 mmol/l (58, 3508). At T12, 11 patients were treated with bosentan, 5 with sildenafil, 1 with inhaled Iloprost (because of failure of the two other treatments) and 1 with a combination of sildenafil and Iloprost. NYHA had improved in 10 patients, remained stable in 7 and worsened in 1 (median decrease 0.5 (-2; 0.2) p = 0.013). Six-MWT improved by a median of 15 meters (-142, +270) (p = 0.047) and NT pro-BNP decreased by a median of 65 mmol/l (-2988, +187) (p = n.s.). Among the 10 patients with a follow-up of 2 years or longer, two thirds remained stable and one third had worsened at 24 month. Treatments were well tolerated and only one patient had significant side effects (cutaneous reaction to bosentan) necessitating a switch to another treatment. Conclusion: In agreement with published data, bosentan and sildenafil improved functional status (NYHA, 6-MWT) and haemodynamics (NT pro BNP) in our patients with inoperable CTEPH. However these medications should not be used as substitute for surgery when the latter is applicable.

5-Azacytidine to Treat Acute Myeloid Leukemia In Elderly or Frail Patients: A Phase II Study (SAKK 30/07).

Background: Acute Myeloid Leukemia (AML) in the elderly is notoriously difficult to treat and has a low remission rate with very few long term survivors when using standard treatment approaches. Azacytidine, a hypomethylating agent, has been shown to induce remission and prolong survival in patients with myelodysplastic syndromes; studying this approach to patients with AML is therefore warranted. We present results of an ongoing phase II trial treating elderly or frail AML patients with Azacytidine. Methods: AML elderly or frail patients, and therefore unfit for an intensive chemotherapy regimens, with a WHO performance status 3 were considered for this trial. Trial therapy consisted of 100mg/m2 of Azacytidine injected subcutaneously on 5 consecutive days every 28 days up to 6 cycles, stopping at 6 months if no hematological improvement achieved, or earlier in the case of progression or complications. Treatment was continued beyond 6 months in responding patients. Trial therapy was considered uninteresting if the response rate (CR + PR) within 6 months of therapy initiation was 15% or less and promising if 34% or more. Using the exact single-stage phase II design by A'Hern with a 5% significance level and 90% power, 43 patients were required: If 10 or fewer achieved a response within 6 months the trial therapy should not be considered for further investigation in its current format for this indication and patient population. Results: Between September 2008 and January 2010, 45 evaluable patients across 10 Swiss centers were accrued with a median follow-up of 7 months (range: 0 - 13). 27 (60%) were male, median age was 74 (range: 55 - 86) years and 35 (78.8%) had performance status 0-1. Patients had been excluded from more intensive chemotherapy regimens because of age (n = 37) or due to comorbidities or patient refusal (n=8). Five patients had therapy related AML. Patients received a median of 3 (range: 1 - 10) cycles. Treatment was stopped for not achieving a response by the 6th cycle in 2 patients and earlier in 26 patients (for disease progression in 5, toxicity in 3, patient refusal in 2, recurrent infections in 1, and death in 8). Seventeen patients remain on therapy. The median time spent in the hospital was 12 days (1 - 30) in 24/38 patients hospitalized during the first treatment cycle and 13 days (2 - 28) in 15/31 patients hospitalized during subsequent cycles. Adverse events of grade III or higher most frequently reported were constitutional or hematologic, i.e. fatigue in 5, febrile neutropenia in 8, infections in 6, dyspnea in 6, anemia in 3, neutropenia in 12 and thrombocytopenia in 10, hemorrhage in 2 and retinal detachment in 5. Based on available data on 38 patients, CR/CRi or hematologic improvement or stable disease within 6 months of trial registration was observed in a proportion of patients. Final and mature data, determining whether the predefined proportion of responding patients has been reached or not, will be presented at the conference. Up to now there were a total of 26 deaths. Median overall survival time was 5.7 months (95% CI: 3.1, 8.7). Conclusions: The current results of this slightly modified Azacytidine schedule demonstrate a feasible new therapy option for elderly or frail AML patients in an outpatient setting with moderate, mainly hematologic toxicity.

Low-dose cidofovir for the treatment of polyomavirus-associated nephropathy: two case reports and review of the literature.

BACKGROUND: Polyomavirus-associated nephropathy (PVAN) is a serious complication and cause of graft loss in kidney transplant recipients. In the absence of specific antiviral drugs, early detection of the disease and reduction of immunosuppressive regimen is the cornerstone of therapy. Cidofovir, a nucleoside analogue, has been found to inhibit BK virus (BKV) replication in vitro and has been proposed as treatment of refractory PVAN at low doses; however, its efficacy has never been demonstrated in randomized controlled trials. METHODS: Cidofovir therapy (0.5 mg/kg at a 2-week interval for eight consecutive doses) was initiated in two patients with biopsy-proven PVAN and persistent BKV DNA viraemia (> or = 10,000 copies/ml despite sustained reduction of the immunosuppressive regimen). In addition to these two case reports, we performed a critical review of the literature on the use of cidofovir in PVAN. RESULTS: No significant decrease of BKV viral load in blood was observed during cidofovir therapy and in follow-up of the two patients treated with cidofovir. Our literature review identified 21 publications reporting the use of cidofovir for the treatment of PVAN. All were case reports or small series. The efficacy of cidofovir therapy could not be assessed in 17 of these publications because of lack of data or concomitant reduction of immunosuppressive regimen. The four remaining publications were case reports. CONCLUSIONS: In vitro and clinical data to support the efficacy of cidofovir in the treatment of PVAN are currently lacking. More promising compounds should be identified for further clinical studies.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Contribution to the conservation biology of the wood ant Formica lugubris (Hymenoptera, Formicidae) in Switzerland

Summary Among ants, wood ants are probably the most fascinating and studied species in temperate European forests. Unfortunately, due to several threats they are nowadays registered in red lists. Recent studies made in the Swiss Jura Mountains ended up in the description of a new sympatric sibling species of Formica lugubris (i.e. Formica paralugubris Seifert 1996). Because of this confusion the biology of F. lugubris is incomplete. Due to the extreme difficulties to distinguish morphologically F. lugubris from F. paralugubris we studied their cuticular hydrocarbons profiles. Irrespective of their geographic origin, we observed quantitative discrimination between species within each caste (workers, males and gynes =young alate female). Moreover, using a behavioural taxonomic approach (i.e. the pupa-carrying test) we showed that ants preferred conspecific worker pupae to those of the sibling species. These first results allowed us to consider the two species as two separate taxonomic units. To understand their coexistence, habitat distribution models were fitted with GIS predictors and factors known to influence wood ant distribution. In the Jura Mountains, although the two species share very similar habitats, they are spatially segregated. F. lugubris occurs more frequently at woodland borders than in forest interiors. We demonstrated with genetic and field data that Formica lugubris displays two different social forms in close proximity in alpine zone (e.g. unmanaged forests of the Swiss National Park). We discovered populations mostly monogynous to weakly polygynous (i.e. one to a few egg laying queens per colony) and monodomous (i.e. one nest per colony), and polygynous/polydomous populations (new nests being founded by colony budding). It is generally admitted that monogyne species disperse well in order to find suitable habitat to found new colonies whereas polygyne species have restricted dispersal and local mating within the nest. In order to compare reproductive strategies of F. lugubris and F. paralugubris (i.e. matings and dealation process) we conducted experiments with sexuals. F, lugubris gynes from monogynous/monodomous populations do not show a local strategy like the obligately polygynous F. paralugubris (i.e. early dealation even without mating, insemination without flight activity and low fat reserve). They always keep their wings, do not mate when not able to fly and have high amount of fat content revealing high survival capacities. On the other side, F, lugubris gynes from polygynous/polydomous populations have lower lipid reserves and displayed a reproductive behaviour close to the F. para lugubris one. After dispersal, wood ant gynes can either start new societies by temporary social parasitism of another species (i.e. subgenus Serviformica) or be adopted intraspecifically in an existing nest. In F. lugubris, we demonstrated that gynes from monogynous/monodomous colonies showed a high success for temporary social parasitism compare to the lower success of gynes from polygynous/polydomous colonies. However, physiological analyses suggested that only gynes from monogynous/ monodomous populations can efficiently disperse and found new nest by temporary social parasitism. Intraspecifically, gynes were accepted to a high degree in polygynous nest and in monogynous nests as long as these nests contained sexuals. In conclusion, Formica lugubris displays a social and dispersal polymorphism (mixed mating and founding system) representing a behavioural plasticity in relation to environmental and ecological conditions. Therefore, conservation measures directed toward this species should try to maintain a maximum of diversity at the habitat level. Résumé Les fourmis des bois sont probablement parmi les espèces de fourmis les plus fascinantes et les plus étudiées des forêts tempérées Européennes. Actuellement, du fait de différentes menaces, elles figurent malheureusement sur listes rouges. Plusieurs études menées au sein du Jura Suisse ont abouti à la description d'une nouvelle espèce jumelle et sympatrique de Formica lugubris (F. para- lugubris Seifert 1996). A cause de cette confusion la biologie de F lugubris est lacunaire. La distinction morphologique de F. lugubris et de F. para lugubris est si difficile que nous avons étudié leurs hydrocarbures cuticulaires. Indépendamment de l'origine géographique, nous avons observé une discrimination quantitative entre les espèces au sein de chaque caste (ouvrières, mâles et jeunes femelles ailées). De plus, à l'aide d'une approche taxonomique comportementale (le test de transport de cocons) nous avons montré que les fourmis préfèrent des cocons d'ouvrières conspécifiques à ceux de l'espèce jumelle. Ces premiers résultats nous permettent de considérer ces deux espèces comme deux unités taxonomiques distinctes et valables. Afin de comprendre leur coexistence, des modèles mathématiques ont été développés avec des données SIG et des facteurs écologiques influençant la répartition des fournis des bois. Dans le Jura, même si elles partagent des habitats fortement similaires, les deux espèces n'occupent pas les mêmes secteurs. F. lugubris est plus fréquente en lisière forestière plutôt qu'en pleine forêt. Nous avons démontré grâce à des données génétiques et de terrain que F. lugubris présente deux formes sociales au sein de la zone alpine (forêts protégées du Parc National Suisse). D'autre part, nous avons découvert des populations monogynes à faiblement polygynes (une à quelques reines pondeuses par colonie) et monodomes (colonies composées d'une seule fourmilière), et des populations polygynes/polydomes (les nouveaux nids étant produit par bourgeonnement). Généralement, les espèces monogynes dispersent sur de grandes distances et peuvent coloniser des habitats favorables à la fondation de nouvelles colonies alors que les espèces polygynes possèdent une dispersion limitée avec des accouplements à l'intérieur des nids. Afin de comparer les stratégies de reproduction de F. lugubris et de F. paralugubris (accouplements et perte des ailes) nous avons mené des expériences avec les sexués. Les jeunes femelles ailées de F. lugubris issues de populations monogynes/monodomes ne présentent pas de stratégie locale comparée à l'espèce obligatoirement polygyne F paralugubris (perte des ailes précoce même si il n'y a pas eu accouplement, insémination possible sans avoir volé activement et faibles réserves de graisse). Elles conservent toujours leurs ailes, ne s'accouplent pas lorsqu'elles sont empêchées de voler et possèdent de grandes quantités de graisse révélant de fortes capacités de survie. D'autre part, les jeunes femelles ailées de F. lugubris provenant de populations polygynes/polydomes ont peu de réserves lipidiques et ont un comportement de reproduction proche de celles de F. paralugubris. Après leur dispersion, les jeunes sexués femelles de fourmis des bois peuvent soit fonder une nouvelle société par parasitisme social temporaire d'un nid d'une autre espèce (sous-genre Serviformica) soit être adoptées dans un nid déjà existant de leur propre espèce. Chez F. lugubris, nous avons pu démontrer que les jeunes sexués femelles de colonies monogynes/monodomes présentent un succès élevé au parasitisme sociale temporaire en comparaison au plus faible succès obtenu avec des sexués provenant de colonies polygynes/polydomes. Cependant, les données physiologiques suggèrent que seules les jeunes sexués femelles de populations mono-gynes/monodomes peuvent disperser efficacement et fonder un nouveau nid par parasitisme social temporaire. Au niveau intraspécifique, les jeunes femelles sont acceptées à un taux élevé dans les nids polygynes mais aussi dans les nids monogynes tant que ces nids possèdent encore de jeunes sexués. En conclusion, F. lugubris est caractérisée par un polymorphisme dans ses structures sociales et ses stratégies de dispersion (système mixte d'accouplement et de fondation) ce qui représente une forte plasticité comportementale en relation avec les conditions environnementales et écologiques. Par conséquent, les mesures de conservation de cette espèce devraient s'attacher à maintenir un maximum de diversité au niveau des habitats.

Glucagon-like peptide-I and the control of insulin secretion in the normal state and in NIDDM.

Potentiation of glucose-induced insulin secretion by intestinal factors has been described for many years. Today, two major peptides with potent insulinotropic action have been recognized: gastric inhibitory peptide and truncated forms of glucagon-like peptide I, GLP-I(7-37) or the related GLP-I(7-36)amide. These hormones have specific beta-cell receptors that are coupled to production of cAMP and activation of cAMP-dependent protein kinase. Elevation in intracellular cAMP levels is required to mediate the glucoincretin effect of these hormones: the potentiation of insulin secretion in the presence of stimulatory concentrations of glucose. In addition, circulating glucoincretins maintain basal levels of cAMP, which are necessary to keep beta-cells in a glucose-competent state. Interactions between glucoincretin signaling and glucose-induced insulin secretion may result from the phosphorylation of key elements of the glucose signaling pathway by cAMP-dependent protein kinase. These include the ATP-dependent K+ channel, the Ca++ channel, or elements of the secretory machinery itself. In NIDDM, the glucoincretin effect is reduced. However, basal or stimulated gastric inhibitory peptide and glucagon-like peptide I levels are normal or even elevated, suggesting that signals induced by these hormones on the beta-cells are probably altered. At pharmacological doses, infusion of glucagon-like peptide I but not gastric inhibitory peptide, can ameliorate postprandial insulin secretory response in NIDDM patients. Agonists of the glucagon-like peptide I receptor have been proposed as new therapeutic agents in NIDDM.

Low incidence of severe respiratory syncytial virus infections in lung transplant recipients despite the absence of specific therapy.

BACKGROUND: Respiratory syncytial virus (RSV) infections in lung transplant recipients (LTRs) have been associated with significant morbidity and mortality. Immunoglobulins, ribavirin, and palivizumab are suggested treatments for both pre-emptive and therapeutic purposes. However, in the absence of randomized, placebo-controlled trials, efficacy is controversial and there is toxicity as well as cost concerns. METHODS: We retrospectively reviewed cases of lower respiratory tract RSV infections in adult LTRs. Diagnosis was based on clinical history, combined with a positive polymerase chain reaction (PCR) and/or viral cultures of bronchoalveolar lavage (BAL) specimens. RESULTS: Ten symptomatic patients were identified (7 men and 3 women, age range 28 to 64 years). All were hospitalized for community-acquired respiratory tract infections. Two patients had a concomitant acute Grade A3 graft rejection, and 1 patient had a concomitant bacterial pneumonia. Eight patients did not receive a specific anti-RSV treatment because of clinical stability and/or improvement at the time of RSV diagnosis. Only 2 patients (1 with Grade A3 allograft rejection and 1 requiring mechanical ventilation) received ribavirin and palivizumab. All patients recovered without complications and with no persistent RSV infection. However, bronchiolitis obliterans (BOS) staging worsened in 6 patients during the mean follow-up of 45 months. CONCLUSIONS: Our data suggest that mild RSV infections in LTRs might evolve favorably in the absence of specific anti-viral therapy. However, this observation needs confirmation in a large clinical trial specifically investigating the development of BOS in untreated vs treated patients.

Interacting populations in heterogeneous environments

To optimally manage a metapopulation, managers and conservation biologists can favor a type of habitat spatial distribution (e.g. aggregated or random). However, the spatial distribution that provides the highest habitat occupancy remains ambiguous and numerous contradictory results exist. Habitat occupancy depends on the balance between local extinction and colonization. Thus, the issue becomes even more puzzling when various forms of relationships - positive or negative co-variation - between local extinction and colonization rate within habitat types exist. Using an analytical model we demonstrate first that the habitat occupancy of a metapopulation is significantly affected by the presence of habitat types that display different extinction-colonization dynamics, considering: (i) variation in extinction or colonization rate and (ii) positive and negative co-variation between the two processes within habitat types. We consequently examine, with a spatially explicit stochastic simulation model, how different degrees of habitat aggregation affect occupancy predictions under similar scenarios. An aggregated distribution of habitat types provides the highest habitat occupancy when local extinction risk is spatially heterogeneous and high in some places, while a random distribution of habitat provides the highest habitat occupancy when colonization rates are high. Because spatial variability in local extinction rates always favors aggregation of habitats, we only need to know about spatial variability in colonization rates to determine whether aggregating habitat types increases, or not, metapopulation occupancy. From a comparison of the results obtained with the analytical and with the spatial-explicit stochastic simulation model we determine the conditions under which a simple metapopulation model closely matches the results of a more complex spatial simulation model with explicit heterogeneity.

G-CSF-induced remission in two cases of acute myeloid leukemia.

We report on two elderly patients with newly diagnosed acute myeloid leukemia (AML) who were treated in palliative intention because of comorbidities and intermediate or poor risk cytogenetics. Both received G-CSF to reduce the risk of infection related to neutropenia. Interestingly, one patient achieved a full hematological remission and the other a peripheral remission with dramatic reduction of the bone marrow blast count. Although a direct therapeutic effect of myeloid growth factors seems to be unusual in AML, the use of G-CSF or GM-CSF may be recommended in patients such as elderly patients who are not suited for intensive chemotherapy.