Pigments and plasters discovered in the House of Diana (Cosa, Grosseto, Italy): An integrated study between art history, archaeology and scientific analyses

The pigments and the plasters of the Roman frescoes discovered at the House of Diana (Cosa, Grosseto, Italy) were analysed using non-destructive and destructive mineralogical and chemical techniques. The characterization of both pigments and plasters was performed through optical microscopy, scanning electron microscopy and electron microprobe analysis. The pigments were identified by Raman spectroscopy and submitted to stable isotope analysis. The results were integrated with the archaeological data in order to determine and reconstruct the provenance, trade patterns and the employment of the raw materials used for the elaboration of the frescoes.

Early Iron Age Pottery: A Quantitative Approach, Proceedings of the International Round Table organized by the Swiss School of Archaeology in Greece (Athens, November 28-30, 2008)

Quantitative approaches in ceramology are gaining ground in excavation reports, archaeological publications and thematic studies. Hence, a wide variety of methods are being used depending on the researchers' theoretical premise, the type of material which is examined, the context of discovery and the questions that are addressed. The round table that took place in Athens on November 2008 was intended to offer the participants the opportunity to present a selection of case studies on the basis of which methodological approaches were discussed. The aim was to define a set of guidelines for quantification that would prove to be of use to all researchers. Contents: 1) Introduction (Samuel Verdan); 2) Isthmia and beyond. How can quantification help the analysis of EIA sanctuary deposits? (Catherine Morgan); 3) Approaching aspects of cult practice and ethnicity in Early Iron Age Ephesos using quantitative analysis of a Protogeometric deposit from the Artemision (Michael Kerschner); 4) Development of a ceramic cultic assemblage: Analyzing pottery from Late Helladic IIIC through Late Geometric Kalapodi (Ivonne Kaiser, Laura-Concetta Rizzotto, Sara Strack); 5) 'Erfahrungsbericht' of application of different quantitative methods at Kalapodi (Sara Strack); 6) The Early Iron Age sanctuary at Olympia: counting sherds from the Pelopion excavations (1987-1996) (Birgitta Eder); 7) L'aire du pilier des Rhodiens à Delphes: Essai de quantification du mobilier (Jean-Marc Luce); 8) A new approach in ceramic statistical analyses: Pit 13 on Xeropolis at Lefkandi (David A. Mitchell, Irene S. Lemos); 9) Households and workshops at Early Iron Age Oropos: A quantitative approach of the fine, wheel-made pottery (Vicky Vlachou); 10) Counting sherds at Sindos: Pottery consumption and construction of identities in the Iron Age (Stefanos Gimatzidis); 11) Analyse quantitative du mobilier céramique des fouilles de Xombourgo à Ténos et le cas des supports de caisson (Jean-Sébastien Gros); 12) Defining a typology of pottery from Gortyn: The material from a pottery workshop pit, (Emanuela Santaniello); 13) Quantification of ceramics from Early Iron Age tombs (Antonis Kotsonas); 14) Quantitative analysis of the pottery from the Early Iron Age necropolis of Tsikalario on Naxos (Xenia Charalambidou); 15) Finding the Early Iron Age in field survey: Two case studies from Boeotia and Magnesia (Vladimir Stissi); 16) Pottery quantification: Some guidelines (Samuel Verdan)

Early Iron Age Pottery: A Quantitative Approach. Proceedings of the International Round Table organized by the Swiss School of Archaeology in Greece (Athens, Novembre 28-30, 2008).

Quantitative approaches in ceramology are gaining ground in excavation reports, archaeological publications and thematic studies. Hence, a wide variety of methods are being used depending on the researchers' theoretical premise, the type of material which is examined, the context of discovery and the questions that are addressed. The round table that took place in Athens on November 2008 was intended to offer the participants the opportunity to present a selection of case studies on the basis of which methodological approaches were discussed. The aim was to define a set of guidelines for quantification that would prove to be of use to all researchers. Contents: 1) Introduction (Samuel Verdan); 2) Isthmia and beyond. How can quantification help the analysis of EIA sanctuary deposits? (Catherine Morgan); 3) Approaching aspects of cult practice and ethnicity in Early Iron Age Ephesos using quantitative analysis of a Protogeometric deposit from the Artemision (Michael Kerschner); 4) Development of a ceramic cultic assemblage: Analyzing pottery from Late Helladic IIIC through Late Geometric Kalapodi (Ivonne Kaiser, Laura-Concetta Rizzotto, Sara Strack); 5) 'Erfahrungsbericht' of application of different quantitative methods at Kalapodi (Sara Strack); 6) The Early Iron Age sanctuary at Olympia: counting sherds from the Pelopion excavations (1987-1996) (Birgitta Eder); 7) L'aire du pilier des Rhodiens à Delphes: Essai de quantification du mobilier (Jean-Marc Luce); 8) A new approach in ceramic statistical analyses: Pit 13 on Xeropolis at Lefkandi (David A. Mitchell, Irene S. Lemos); 9) Households and workshops at Early Iron Age Oropos: A quantitative approach of the fine, wheel-made pottery (Vicky Vlachou); 10) Counting sherds at Sindos: Pottery consumption and construction of identities in the Iron Age (Stefanos Gimatzidis); 11) Analyse quantitative du mobilier céramique des fouilles de Xombourgo à Ténos et le cas des supports de caisson (Jean-Sébastien Gros); 12) Defining a typology of pottery from Gortyn: The material from a pottery workshop pit, (Emanuela Santaniello); 13) Quantification of ceramics from Early Iron Age tombs (Antonis Kotsonas); 14) Quantitative analysis of the pottery from the Early Iron Age necropolis of Tsikalario on Naxos (Xenia Charalambidou); 15) Finding the Early Iron Age in field survey: Two case studies from Boeotia and Magnesia (Vladimir Stissi); 16) Pottery quantification: Some guidelines (Samuel Verdan).

3D geoelectrical monitoring to follow hydric soil behaviour during rainfall

RESUME Durant les dernières années, les méthodes électriques ont souvent été utilisées pour l'investigation des structures de subsurface. L'imagerie électrique (Electrical Resistivity Tomography, ERT) est une technique de prospection non-invasive et spatialement intégrée. La méthode ERT a subi des améliorations significatives avec le développement de nouveaux algorithmes d'inversion et le perfectionnement des techniques d'acquisition. La technologie multicanale et les ordinateurs de dernière génération permettent la collecte et le traitement de données en quelques heures. Les domaines d'application sont nombreux et divers: géologie et hydrogéologie, génie civil et géotechnique, archéologie et études environnementales. En particulier, les méthodes électriques sont souvent employées dans l'étude hydrologique de la zone vadose. Le but de ce travail est le développement d'un système de monitorage 3D automatique, non- invasif, fiable, peu coûteux, basé sur une technique multicanale et approprié pour suivre les variations de résistivité électrique dans le sous-sol lors d'événements pluvieux. En raison des limitations techniques et afin d'éviter toute perturbation physique dans la subsurface, ce dispositif de mesure emploie une installation non-conventionnelle, où toutes les électrodes de courant sont placées au bord de la zone d'étude. Le dispositif le plus approprié pour suivre les variations verticales et latérales de la résistivité électrique à partir d'une installation permanente a été choisi à l'aide de modélisations numériques. Les résultats démontrent que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle et plus apte à détecter les variations latérales et verticales de la résistivité électrique, et cela malgré la configuration non-conventionnelle des électrodes. Pour tester l'efficacité du système proposé, des données de terrain ont été collectées sur un site d'étude expérimental. La technique de monitorage utilisée permet de suivre le processus d'infiltration 3D pendant des événements pluvieux. Une bonne corrélation est observée entre les résultats de modélisation numérique et les données de terrain, confirmant par ailleurs que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle. La nouvelle technique de monitorage 3D de résistivité électrique permet de caractériser les zones d'écoulement préférentiel et de caractériser le rôle de la lithologie et de la pédologie de manière quantitative dans les processus hydrologiques responsables d'écoulement de crue. ABSTRACT During the last years, electrical methods were often used for the investigation of subsurface structures. Electrical resistivity tomography (ERT) has been reported to be a useful non-invasive and spatially integrative prospecting technique. The ERT method provides significant improvements, with the developments of new inversion algorithms, and the increasing efficiency of data collection techniques. Multichannel technology and powerful computers allow collecting and processing resistivity data within few hours. Application domains are numerous and varied: geology and hydrogeology, civil engineering and geotechnics, archaeology and environmental studies. In particular, electrical methods are commonly used in hydrological studies of the vadose zone. The aim of this study was to develop a multichannel, automatic, non-invasive, reliable and inexpensive 3D monitoring system designed to follow electrical resistivity variations in soil during rainfall. Because of technical limitations and in order to not disturb the subsurface, the proposed measurement device uses a non-conventional electrode set-up, where all the current electrodes are located near the edges of the survey grid. Using numerical modelling, the most appropriate arrays were selected to detect vertical and lateral variations of the electrical resistivity in the framework of a permanent surveying installation system. The results show that a pole-dipole array has a better resolution than a pole-pole array and can successfully follow vertical and lateral resistivity variations despite the non-conventional electrode configuration used. Field data are then collected at a test site to assess the efficiency of the proposed monitoring technique. The system allows following the 3D infiltration processes during a rainfall event. A good correlation between the results of numerical modelling and field data results can be observed since the field pole-dipole data give a better resolution image than the pole-pole data. The new device and technique makes it possible to better characterize the zones of preferential flow and to quantify the role of lithology and pedology in flood- generating hydrological processes.

Le grand nymphée de Leptis Magna : étude historiographique, urbanistique et architecturale

RESUME en français Centrée sur le grand nymphée de Leptis Magna la recherche met en évidence l'évolution et la signification de ce monument des eaux dans l'une des plus importantes cités africaines de l'époque romaine en mettant en lumière trois thèmes principaux. L'étude historiographique permet tout d'abord d'appréhender, à l'aide des témoignages littéraires des siècles derniers et d'une abondante documentation d'archive, l'histoire de l'édifice de son ensablement à sa remise au jour, puis de suivre les différentes étapes de son dégagement et de sa restauration, mettant ainsi en relief la perception des divers observateurs à l'encontre du monument. L'étude urbanistique permet ensuite de dégager la signification de l'édifice dans la cité par rapport aux autres monuments du secteur aux différentes périodes de son histoire, ainsi que de reconstituer l'approvisionnement en eau de Leptis Magna. Enfin, l'étude architecturale s'intéresse à l'analyse détaillée des structures, permettant la mise en évidence de la conception initiale, du fonctionnement et des transformations du nymphée. Cette dernière approche, qui s'accompagne d'un catalogue circonstancié des éléments du décor, fait intervenir des considérations sur les techniques de constructions, le traitement des blocs d'ornementation et, d'une manière plus générale, sur ('économie du chantier. Cette recherche permet non seulement de reconstituer l'aspect, le rôle et l'histoire du monument et de le replacer dans la série des nymphées romains, mais aussi de percevoir son impact sur les habitants du lieu aux différents moments de son histoire, cherchant ainsi à rejoindre par l'archéologie des considérations sociologiques. THE GREAT SEVERAN NYMPHAEUM OF LEPTIS MAGNA: HISTORIOGRAPHICAL, URBANISTIC AND ARCHITECTURAL STUDY RESUME en anglais Based on the great nymphaeum of Leptis Magna, the research considers the development and significance of this water monument in one of the most important African cities of the Roman period, through three principal aspects. The historiographical study aboards the subject through literary testimony from the last centuries and an abundance of documentary archives, the history of the edifice from its burial to its reconstruction, studying the different stages of its unearthing and its restoration, thus pinpointing perspectives from various observers of the monument. The urban study divulges the significance of the edifice in the city, in comparison with other monuments in the region over different periods of its history, as well as reconstituting Leptis Magna's water supply. Finally, the architectural study undertakes a detailed analysis of the structures, which highlights the conception and the transformations of the nymphaeum, as well as its hydraulic functions. This architectural approach, which is accompanied by a detailed catalogue of the decorative elements, juxtaposes the technical considerations of construction with the ornamental treatment of the marble blocks, accounting for the economical aspects of the site of the nymphaeum. This research proposes not only a consideration of the appearance, the role and the history of the monument and situates it within the series of Roman nymphaea, but also the perception of its impact on the local inhabitants at different moments in its history, looking for accomplish by archaeology some sociological considerations.

Calceology : an introduction to North Western European archaeological leather footwear (Neolithic period to c. AD 1600)

Calceology is the study of recovered archaeological leather footwear and is comprised of conservation, documentation and identification of leather shoe components and shoe styles. Recovered leather shoes are complex artefacts that present technical, stylistic and personal information about the culture and people that used them. The current method in calceological research for typology and chronology is by comparison with parallel examples, though its use poses problems by an absence of basic definitions and the lack of a taxonomic hierarchy. The research findings of the primary cutting patterns, used for making all leather footwear, are integrated with the named style method and the Goubitz notation, resulting in a combined methodology as a basis for typological organisation for recovered footwear and a chronology for named shoe styles. The history of calceological research is examined in chapter two and is accompanied by a review of methodological problems as seen in the literature. Through the examination of various documentation and research techniques used during the history of calceological studies, the reasons why a standard typology and methodology failed to develop are investigated. The variety and continual invention of a new research method for each publication of a recovered leather assemblage hindered the development of a single standard methodology. Chapter three covers the initial research with the database through which the primary cutting patterns were identified and the named styles were defined. The chronological span of each named style was established through iterative cross-site sedation and named style comparisons. The technical interpretation of the primary cutting patterns' consistent use is due to constraints imposed by the leather and the forms needed to cover the foot. Basic parts of the shoe patterns and the foot are defined, plus terms provided for identifying the key points for pattern making. Chapter four presents the seventeen primary cutting patterns and their sub-types, these are divided into three main groups: six integral soled patterns, four hybrid soled patterns and seven separately soled patterns. Descriptions of the letter codes, pattern layout, construction principle, closing seam placement and list of sub-types are included in the descriptions of each primary cutting pattern. The named shoe styles and their relative chronology are presented in chapter five. Nomenclature for the named styles is based on the find location of the first published example plus the primary cutting pattern code letter. The named styles are presented in chronological order from Prehistory through to the late 16th century. Short descriptions of the named styles are given and illustrated with examples of recovered archaeological leather footwear, reconstructions of archaeological shoes and iconographical sources. Chapter six presents documentation of recovered archaeological leather using the Goubitz notation, an inventory and description of style elements and fastening methods used for defining named shoe styles, technical information about sole/upper constructions and the consequences created by the use of lasts and sewing forms for style identification and fastening placement in relation to the instep point. The chapter concludes with further technical information about the implications for researchers about shoemaking, pattern making and reconstructive archaeology. The conclusion restates the original research question of why a group of primary cutting patterns appear to have been used consistently throughout the European archaeological record. The quantitative and qualitative results from the database show the use of these patterns but it is the properties of the leather that imposes the use of the primary cutting patterns. The combined methodology of primary pattern identification, named style and artefact registration provides a framework for calceological research.

Lateglacial evolution of the Brenno glacier (Southern Swiss Alps) : preliminary results

The Lateglacial evolution of the Ticino glacier and tributaries is poorly known because of the lack of research by Quaternary geomorphologists during the last decades. In spite of the interest for the cryosphere reactions during the Lateglacial climate warming, only few scientific studies were carried out about the history of the northern valleys of the Ticino Alps during the deglaciation (e.g. Seiffert 1953, Renner 1982, Hantke 1983). Within the framework of geomorphological investigations on the Lateglacial and Holocene glacier/permafrost evolution in the Ticino Alps, the history of the Brenno glacier (Blenio Valley, Eastern Ticino Alps) during the end of the Pleistocene has been studied. The deglaciation sequence of the Blenio Valley is still not complete (Scapozza et al. 2009). Only the first glacial stadial of the Brenno glacier and the last Lateglacial stadials of the Greina region (northern Blenio valley, see Fontana et al. 2008) and of the upper Malvaglia Valley (eastern Blenio Valley, see Scapozza et al. 2008) have been unequivocally defined. For every stadial, the surface of the palaeoglacier and the depression of the Equilibrium Line Altitude (ELA) have been reconstructed on the base of geomorphological mapping. The first individual glacial stadial of the Brenno glacier corresponds to the Biasca stadial of the Ticino glacier defined by Hantke (1983). The ELA depression of 1100-1200 meters and its morphological and glaciological characteristics allow us to correlate this stadial with the Weissbad stadial defined by Keller (1988). In the Greina region, three stadials corresponding to the end of the Lateglacial have been identified, with an ELA depression of 110, 210 and 310-350 meters (Fontana et al. 2008). In the upper Malvaglia Valley, three stadials corresponding to the end of the Oldest Dryas and the Younger Dryas have been identified for the Orino glacier, with an ELA depression of 290, 400-420 and 470-560 meters (Scapozza et al. 2008). If we consider the other (fragmentary) glacial deposits of the Blenio Valley, it is possible to define a regression sequence of the Brenno glacier with 8 stadials, from the Biasca stadial to the end of the Younger Dryas. An attempt of correlation with the model "Gothard" developed by Renner (1982) and Hantke (1983) and with the model "Eastern Swiss Alps" developed by Maisch (1982) is proposed in Table 1. The following chronological conclusions are, therefore, proposed: (1) the Biasca stadial is probably the first stadial after the transition Pleniglacial - Lateglacial; (2) the stadials BRE 7 to BRE 3 are positioned between the beginning of the Lateglacial and the Bølling-Allerød interstadial; (3) the stadials BRE 2 and BRE 1 are assumed to be related to the Younger Dryas event.