Effects of different Incentives on Attrition and Fieldwork Effort in Telephone Household Panel Surveys

Little is known about sample behavior and fieldwork effects of different incentives introduced in a household panel survey. This is especially true for telephone surveys. In a randomized experiment, the Swiss Household Panel implemented one prepaid and two promised nonmonetary incentives in the range of 10 to 15 Swiss Francs (7-10 e), plus a no incentive control group. The aim of the paper is to compare effects of these incentives especially on cooperation, but also on sample selection and fieldwork effort, separated by the household and the subsequent individual level. We find small positive cooperation effects of the prepaid incentive on both the household and the individual level especially in larger households. Sample composition is affected to a very minor extent. Finally, incentives tend to save fieldwork time and partially the number of contacts needed on the individual level.

Attrition of Households and Individuals in Panel Surveys

Attrition is mostly caused by not contacted or refusing sample members. On one hand it is well-known that reasons to attrite due to non-contact are different from those that are due to refusal. On the other hand does non-contact most probably affect household attrition, while refusal can be effective on both households and individuals. In this article, attrition on both the household and (conditional on household participation) the individual level is analysed in three panel surveys from the Cross National Equivalent File (CNEF): the German Socio- Economic Panel (GSOEP), the British Household Panel Study (BHPS), and the Swiss Household Panel (SHP). To follow households over time we use a common rule in all three surveys. First, we find different attrition magnitudes and patterns both across the surveys and also on the household and the individual level. Second, there is more evidence for reinforced rather than compensated household level selection effects if the individual level is also taken into account.

Attrition in the Swiss Household Panel: Is change associated with later drop-out?

This study examines the importance of change in characteristics and circumstances of households and household members for contact and cooperation patterns. The literature suggests that there might be an underrepresentation of change in panel studies, because respondents facing more changes would be more likely to drop out. We approach this problem by analysing whether previous changes are predictive of later attrition or temporary drop-out, using eleven waves of the Swiss Household Panel (1999-2009). Our analyses support previous findings to some extent. Changes in household composition, employment status and social involvement as well as moving are associated mainly with attrition and less with temporary drop-out. These changes affect obtaining cooperation rather than obtaining contact, and tend to increase attrition.

Attrition in the Swiss Household Panel

In this paper, we analyze magnitude and possible selectivity of attrition in first wave respondents in the Swiss Household Panel (SHP), from wave two (2000) through wave seven (2005). After comparing attrition of first wave respondents with that of other panel surveys, we proceed to model selectivity of attrition in two steps: we first build separate waveto- wave models, and second a longitudinal all-wave model. The latter model includes wave interaction effects. The first models allow for tracing of selectivity development, i.e. whether an initial selectivity might compensate or cumulates over time, the second to assessing the effects of the covariates in a specific wave, controlling for the base attrition effect. In particular it allows for the analysis of consequences due to discrete fieldwork events. Our results support the findings in the literature: attritors are in general the younger people and the males, foreigners, the socially and politically "excluded", i.e. those who show little social and political interest and participation, those who are mostly dissatisfied with various aspects in their life, and those who live in households with high unit nonresponse, and who exhibit a worse reporting behavior. This pattern is rather cumulative than compensating over panel waves. Excessive attrition in two waves presumably caused by two discrete events in the panel is not particularly selective. Still existing variation in selective attrition is worth to be further explored.

First insights into the transcriptome and development of new genomic tools of a widespread circum-Mediterranean tree species, Pinus halepensis Mill.

Aleppo pine (Pinus halepensis Mill.) is a relevant conifer species for studying adaptive responses to drought and fire regimes in the Mediterranean region. In this study, we performed Illumina next-generation sequencing of two phenotypically divergent Aleppo pine accessions with the aims of (i) characterizing the transcriptome through Illumina RNA-Seq on trees phenotypically divergent for adaptive traits linked to fire adaptation and drought, (ii) performing a functional annotation of the assembled transcriptome, (iii) identifying genes with accelerated evolutionary rates, (iv) studying the expression levels of the annotated genes and (v) developing gene-based markers for population genomic and association genetic studies. The assembled transcriptome consisted of 48,629 contigs and covered about 54.6 Mbp. The comparison of Aleppo pine transcripts to Picea sitchensis protein-coding sequences resulted in the detection of 34,014 SNPs across species, with a Ka /Ks average value of 0.216, suggesting that the majority of the assembled genes are under negative selection. Several genes were differentially expressed across the two pine accessions with contrasted phenotypes, including a glutathione-s-transferase, a cellulose synthase and a cobra-like protein. A large number of new markers (3334 amplifiable SSRs and 28,236 SNPs) have been identified which should facilitate future population genomics and association genetics in this species. A 384-SNP Oligo Pool Assay for genotyping with the Illumina VeraCode technology has been designed which showed an high overall SNP conversion rate (76.6%). Our results showed that Illumina next-generation sequencing is a valuable technology to obtain an extensive overview on whole transcriptomes of nonmodel species with large genomes.

Attrition in the Swiss Household Panel: Is change associated with drop-out?

This study examines the importance of change in characteristics and circumstances ofhouseholds and household members for contact and cooperation patterns. The literaturesuggests that there might be an underrepresentation of change in panel studies, becauserespondents facing more changes would be more likely to drop out. We approach this problemby analysing whether previous changes are predictive of later attrition or temporary drop-out,using eleven waves of the Swiss Household Panel (1999-2009). Our analyses supportprevious findings to some extent. Changes in household composition, employment status andsocial involvement as well as moving are associated mainly with attrition and less withtemporary drop-out. These changes affect obtaining cooperation rather than obtaining contact,and tend to increase attrition.

Jevons, Mill and the Private Laboratory of the Mind

In this paper the rift between Jevons and Mill over the method of political economy serves as a prehistory to recent attempts of behavioural economists to once again explain economic behaviour by taking recourse to mankind's physiology. While Mill relied on the association psychology and its introspective method to establish indubitable first principles, Jevons scorned all recourse to introspection. As exemplified for Jevons's theory of labour, psychophysiology gave Jevons the means to think about economic behaviour in terms of functional form, and promised its assessment by means of experiments. Thus levelling down the Victorian distinction between mind and matter, Jevons turned political economy into social physics.

Effects of motive-oriented therapeutic relationship in a ten-session general psychiatric treatment of borderline personality disorder: a randomized controlled trial.

Background: Motive-oriented therapeutic relationship (MOTR) was postulated to be a particularly helpful therapeutic ingredient in the early treatment phase of patients with personality disorders, in particular with borderline personality disorder (BPD). The present randomized controlled study using an add-on design is the first study to test this assumption in a 10-session general psychiatric treatment with patients presenting with BPD on symptom reduction and therapeutic alliance. Methods: A total of 85 patients were randomized. They were either allocated to a manual-based short variant of the general psychiatric management (GPM) treatment (in 10 sessions) or to the same treatment where MOTR was deliberately added to the treatment. Treatment attrition and integrity analyses yielded satisfactory results. Results: The results of the intent-to-treat analyses suggested a global efficacy of MOTR, in the sense of an additional reduction of general problems, i.e. symptoms, interpersonal and social problems (F1, 73 = 7.25, p < 0.05). However, they also showed that MOTR did not yield an additional reduction of specific borderline symptoms. It was also shown that a stronger therapeutic alliance, as assessed by the therapist, developed in MOTR treatments compared to GPM (Z55 = 0.99, p < 0.04). Conclusions: These results suggest that adding MOTR to psychiatric and psychotherapeutic treatments of BPD is promising. Moreover, the findings shed additional light on the perspective of shortening treatments for patients presenting with BPD. © 2014 S. Karger AG, Basel.

Correlation of wear in vivo and six laboratory wear methods.

OBJECTIVE: We examined the correlation between clinical wear rates of restorative materials and enamel (TRAC Research Foundation, Provo, USA) and the results of six laboratory test methods (ACTA, Alabama (generalized, localized), Ivoclar (vertical, volumetric), Munich, OHSU (abrasion, attrition), Zurich). METHODS: Individual clinical wear data were available from clinical trials that were conducted by TRAC Research Foundation (formerly CRA) together with general practitioners. For each of the n=28 materials (21 composite resins for intra-coronal restorations [20 direct and 1 indirect], 5 resin materials for crowns, 1 amalgam, enamel) a minimum of 30 restorations had been placed in posterior teeth, mainly molars. The recall intervals were up to 5 years with the majority of materials (n=27) being monitored, however, only for up to 2 years. For the laboratory data, the databases MEDLINE and IADR abstracts were searched for wear data on materials which were also clinically tested by TRAC Research Foundation. Only those data for which the same test parameters (e.g. number of cycles, loading force, type of antagonist) had been published were included in the study. A different quantity of data was available for each laboratory method: Ivoclar (n=22), Zurich (n=20), Alabama (n=17), OHSU and ACTA (n=12), Munich (n=7). The clinical results were summed up in an index and a linear mixed model was fitted to the log wear measurements including the following factors: material, time (0.5, 1, 2 and 3 years), tooth (premolar/molar) and gender (male/female) as fixed effects, and patient as random effect. Relative ranks were created for each material and method; the same was performed with the clinical results. RESULTS: The mean age of the subjects was 40 (±12) years. The materials had been mostly applied in molars (81%) and 95% of the intracoronal restorations were Class II restorations. The mean number of individual wear data per material was 25 (range 14-42). The mean coefficient of variation of clinical wear data was 53%. The only significant correlation was reached by OHSU (abrasion) with a Spearman r of 0.86 (p=0.001). Zurich, ACTA, Alabama generalized wear and Ivoclar (volume) had correlation coefficients between 0.3 and 0.4. For Zurich, Alabama generalized wear and Munich, the correlation coefficient improved if only composites for direct use were taken into consideration. The combination of different laboratory methods did not significantly improve the correlation. SIGNIFICANCE: The clinical wear of composite resins is mainly dependent on differences between patients and less on the differences between materials. Laboratory methods to test conventional resins for wear are therefore less important, especially since most of them do not reflect the clinical wear.