Hydrogen sulfide measurement by headspace-gas chromatography-mass spectrometry (HS-GC-MS): application to gaseous samples and gas dissolved in muscle.

The aim of our study was to present a new headspace-gas chromatography-mass spectrometry (HS-GC-MS) method applicable to the routine determination of hydrogen sulfide (H(2)S) concentrations in biological and gaseous samples. The primary analytical drawback of the GC/MS methods for H(2)S measurement discussed in the literature was the absence of a specific H(2)S internal standard required to perform quantification. Although a deuterated hydrogen sulfide (D(2)S) standard is currently available, this standard is not often used because this standard is expensive and is only available in the gas phase. As an alternative approach, D(2)S can be generated in situ by reacting deuterated chloride with sodium sulfide; however, this technique can lead to low recovery yield and potential isotopic fractionation. Therefore, N(2)O was chosen for use as an internal standard. This method allows precise measurements of H(2)S concentrations in biological and gaseous samples. Therefore, a full validation using accuracy profile based on the β-expectation tolerance interval is presented. Finally, this method was applied to quantify H(2)S in an actual case of H(2)S fatal intoxication.

Use of the FACTS solvation model for protein-ligand docking calculations. Application to EADock.

Protein-ligand docking has made important progress during the last decade and has become a powerful tool for drug development, opening the way to virtual high throughput screening and in silico structure-based ligand design. Despite the flattering picture that has been drawn, recent publications have shown that the docking problem is far from being solved, and that more developments are still needed to achieve high successful prediction rates and accuracy. Introducing an accurate description of the solvation effect upon binding is thought to be essential to achieve this goal. In particular, EADock uses the Generalized Born Molecular Volume 2 (GBMV2) solvent model, which has been shown to reproduce accurately the desolvation energies calculated by solving the Poisson equation. Here, the implementation of the Fast Analytical Continuum Treatment of Solvation (FACTS) as an implicit solvation model in small molecules docking calculations has been assessed using the EADock docking program. Our results strongly support the use of FACTS for docking. The success rates of EADock/FACTS and EADock/GBMV2 are similar, i.e. around 75% for local docking and 65% for blind docking. However, these results come at a much lower computational cost: FACTS is 10 times faster than GBMV2 in calculating the total electrostatic energy, and allows a speed up of EADock by a factor of 4. This study also supports the EADock development strategy relying on the CHARMM package for energy calculations, which enables straightforward implementation and testing of the latest developments in the field of Molecular Modeling.

Prescriptions de protection incendie en Suisse : étude de leur domaine d'application et de leur respect par l'investigation d'incendies

Avant - Propos Le feu et la protection incendie Quel que soit l'usage d'un bâtiment, chaque étape de la construction est soumise à l'application de normes. Certaines, utilisées par les architectes et les ingénieurs, concernent le gros oeuvre ; en simplifiant leur rôle, elles assurent la solidité et la stabilité de l'immeuble. Si celui-ci est ouvert au public, des aménagements particuliers concernant la sécurité des personnes sont imposés. D'autres comme les prescriptions sur les installations électriques intérieures, précisent la manière de construire une alimentation, le type de matériel utilisable en fonction du courant et de la tension, les sécurités destinées à éviter toute détérioration des circuits et tout risque d'électrocution, etc. Enfin, les prescriptions en matière de protection incendie jouent évidemment un rôle préventif et, dans le domaine judiciaire, servent de références pour qualifier une éventuelle infraction ; elles évitent qu'une source de chaleur installée dans un bâtiment - tel qu'un appareil de chauffage ou des plaques de cuisson - ou susceptible d'apparaître consécutivement à l'usure d'un matériau ou à son vieillissement - disparition d'un isolant thermique, défaut d'étanchéité d'un conduit transportant les gaz chauds de combustion, par exemple - ne communiquent une partie de l'énergie calorifique dégagée à un combustible et ne l'enflamme. Le concept de protection incendie implique d'exposer et de développer les principales notions relatives à l'inflammation d'un matériau, à sa combustion ainsi qu'au transport de l'énergie calorifique. Fréquemment, le milieu dans lequel le générateur de chaleur est installé joue un rôle dans la phase d'allumage de l'incendie. Il est évident que les prescriptions de protection incendie s'appliquent à chaque élément de construction et, par conséquent, doivent être respectées par toute personne participant à la réalisation d'un ouvrage : le chauffagiste, l'électricien, l'installateur sanitaire, le constructeur de cuisine, mais également le maçon qui construit la cheminée, le peintre et le décorateur qui posent des revêtements ou des garnitures inflammables, le menuisier qui utilise le bois pour dissimuler des conduites de fumée, etc. Dès lors, tout sinistre, hormis celui qui est perpétré délibérément, ne peut s'expliquer que par : - le non-respect ou le défaut d'application d'une prescription de protection incendie; - une lacune de la norme qui ignore une source d'échauffement et/ou un mode de transfert de l'énergie calorifique. Le but premier de ce travail consiste à : - analyser les sinistres survenus durant les années 1999 à 2005 dans plusieurs cantons suisses qui ont fait l'objet d'une investigation de la part d'un service technique de la police ou d'un expert ; - examiner les éléments retenus pour expliquer la cause de l'incendie à la norme afin de répondre à la question : « l'application d'une ou de plusieurs directives lors de l'installation ou de l'utilisation du générateur d'énergie calorifique aurait-elle évité à ce dernier de communiquer une partie de la chaleur dégagée à un combustible et à l'enflammer ? » Le second objectif visé est d'apporter une solution à la question précédente : - si la norme existe, c'est un défaut d'installation ou d'utilisation de la source de chaleur qui est à l'origine de l'incendie. Il importe donc de connaître la raison pour laquelle la prescription a été ignorée ou appliquée de manière erronée ou lacunaire; - si la norme n'existe pas, ce sont les prescriptions en matière de protection incendie qui doivent être complétées. Le chapitre suivant abordera ces thèmes en proposant divers postulats destinés à évaluer l'efficacité actuelle du concept de protection incendie en Suisse.

Numerical analysis of wave-induced fluid flow effects on seismic data: Application to monitoring of CO2 storage at the Sleipner Field

In this work we analyze how patchy distributions of CO2 and brine within sand reservoirs may lead to significant attenuation and velocity dispersion effects, which in turn may have a profound impact on surface seismic data. The ultimate goal of this paper is to contribute to the understanding of these processes within the framework of the seismic monitoring of CO2 sequestration, a key strategy to mitigate global warming. We first carry out a Monte Carlo analysis to study the statistical behavior of attenuation and velocity dispersion of compressional waves traveling through rocks with properties similar to those at the Utsira Sand, Sleipner field, containing quasi-fractal patchy distributions of CO2 and brine. These results show that the mean patch size and CO2 saturation play key roles in the observed wave-induced fluid flow effects. The latter can be remarkably important when CO2 concentrations are low and mean patch sizes are relatively large. To analyze these effects on the corresponding surface seismic data, we perform numerical simulations of wave propagation considering reservoir models and CO2 accumulation patterns similar to the CO2 injection site in the Sleipner field. These numerical experiments suggest that wave-induced fluid flow effects may produce changes in the reservoir's seismic response, modifying significantly the main seismic attributes usually employed in the characterization of these environments. Consequently, the determination of the nature of the fluid distributions as well as the proper modeling of the seismic data constitute important aspects that should not be ignored in the seismic monitoring of CO2 sequestration problems.

Towards a global criteria based framework for the sustainability assessment of bioethanol supply chains: application to the Swiss dilemma : is local produced bioethanol more sustainable than bioethanol imported from Brazil?

Biofuels are considered as a promising substitute for fossil fuels when considering the possible reduction of greenhouse gases emissions. However limiting their impacts on potential benefits for reducing climate change is shortsighted. Global sustainability assessments are necessary to determine the sustainability of supply chains. We propose a new global criterion based framework enabling a comprehensive international comparison of bioethanol supply chains. The interest of this framework is that the selection of the sustainability indicators is qualified on three criterions: relevance, reliability and adaptability to the local context. Sustainability issues have been handled along environmental, social and economical issues. This new framework has been applied for a specific issue: from a Swiss perspective, is locally produced bioethanol in Switzerland more sustainable than imported from Brazil? Thanks to this framework integrating local context in its indicator definition, Brazilian production of bioethanol is shown as energy efficient and economically interesting for Brazil. From a strictly economic point of view, bioethanol production within Switzerland is not justified for Swiss consumption and questionable for the environmental issue. The social dimension is delicate to assess due to the lack of reliable data and is strongly linked to the agricultural policy in both countries. There is a need of establishing minimum sustainability criteria for imported bioethanol to avoid unwanted negative or leakage effects.

Chromatin insulators and Prospective Application for gene Therapy.

Integrating viral vectors hold great promise as gene transfer vectors for gene therapy purposes because they allow maintaining long-term expression of the therapeutic transgene throughout cell divisions. However, many issues related to integration of the provirus remain as a substantial risk for patients. The use of chromatin insulators has been proposed as a possible solution to problems raised by the integration of the vector.

Mirror me : the effect of the voting advice application smartvote on voting preferences and behavior of Swiss voters

Voting Advice Applications (VAAs) have become a central component of election campaigns worldwide. Through matching political preferences of voters to parties and candidates, the web application grants voters a look into their political mirror and reveals the most suitable political choices to them in terms of policy congruence. Both the dense and concise information on the electoral offer and the comparative nature of the application make VAAs an unprecedented information source for electoral decision making. In times where electoral choices are found to be highly individualized and driven by political issue positions, an ever increasing number of voters turn to VAAs before casting their ballots. With VAAs in high demand, the question of their effects on voters has become a pressing research topic. In various countries, survey research has been used to proclaim an impact of VAAs on electoral behavior, yet practically all studies fail to provide the scientific evidence that would allow for making such claims. In this thesis, I set out to systematically establish the causal link between VAA use and electoral behavior, using various data sources and appropriate statistical techniques in doing so. The focus lies on the Swiss VAA smartvote, introduced in the forefront of the 2003 Swiss federal elections and meanwhile an integral part of the national election campaign, smartvote has produced over a million voting recommendations in the last Swiss federal elections to an active electorate of two million, potentially guiding a vast amount of voters in their choices on the ballot. In order to determine the effect of the VAA on electoral behavior, I analyze both voting preferences and choice among Swiss voters during two consecutive election periods. First, I introduce statistical techniques to adequately examine VAA effects in observational studies and use them to demonstrate that voters who used smartvote prior to the 2007 Swiss federal elections were significantly more likely to swing vote in the elections than non- users. Second, I analyze preference voting during the same election and show that the smartvote voting recommendation inclines politically knowledgeable voters to modify their ballots and cast candidate specific preference votes. Third, to further tackle the indication that smartvote use affects the preference structure of voters, I employ an experimental research design to demonstrate that voters who use the application tend to strengthen their vote propensities for their most preferred party and adapt their overall party preferences in a way that they consider more than one party as eligible vote options after engaging with the application. Finally, vote choice is examined for the 2011 Swiss federal election, showing once more that the VAA initiated a change of party choice among voters. In sum, this thesis presents empirical evidence for the transformative effect of the Swiss VAA smartvote on the electoral behavior.

Method to assess and optimise dependability of complex macro-systems: application to a railway signalling system

Achieving a high degree of dependability in complex macro-systems is challenging. Because of the large number of components and numerous independent teams involved, an overview of the global system performance is usually lacking to support both design and operation adequately. A functional failure mode, effects and criticality analysis (FMECA) approach is proposed to address the dependability optimisation of large and complex systems. The basic inductive model FMECA has been enriched to include considerations such as operational procedures, alarm systems. environmental and human factors, as well as operation in degraded mode. Its implementation on a commercial software tool allows an active linking between the functional layers of the system and facilitates data processing and retrieval, which enables to contribute actively to the system optimisation. The proposed methodology has been applied to optimise dependability in a railway signalling system. Signalling systems are typical example of large complex systems made of multiple hierarchical layers. The proposed approach appears appropriate to assess the global risk- and availability-level of the system as well as to identify its vulnerabilities. This enriched-FMECA approach enables to overcome some of the limitations and pitfalls previously reported with classical FMECA approaches.

Transfer insensitive labeling technique (TILT): application to multislice functional perfusion imaging.

Cerebral blood flow can be studied in a multislice mode with a recently proposed perfusion sequence using inversion of water spins as an endogenous tracer without magnetization transfer artifacts. The magnetization transfer insensitive labeling technique (TILT) has been used for mapping blood flow changes at a microvascular level under motor activation in a multislice mode. In TILT, perfusion mapping is achieved by subtraction of a perfusion-sensitized image from a control image. Perfusion weighting is accomplished by proximal blood labeling using two 90 degrees radiofrequency excitation pulses. For control preparation the labeling pulses are modified such that they have no net effect on blood water magnetization. The percentage of blood flow change, as well as its spatial extent, has been studied in single and multislice modes with varying delays between labeling and imaging. The average perfusion signal change due to activation was 36.9 +/- 9.1% in the single-slice experiments and 38.1 +/- 7.9% in the multislice experiments. The volume of activated brain areas amounted to 1.51 +/- 0.95 cm3 in the contralateral primary motor (M1) area, 0.90 +/- 0.72 cc in the ipsilateral M1 area, 1.27 +/- 0.39 cm3 in the contralateral and 1.42 +/- 0.75 cm3 in the ipsilateral premotor areas, and 0.71 +/- 0.19 cm3 in the supplementary motor area.

Le jeu trilogique de Lausanne et son application dans des situations de consultance

Pour honorer Edith Tilmans-Ostyn, j'ai choisi de parler de « consultance », selon sa définition, avec différentes utilisations du jeu trilogique de Lausanne, dit LTP (Lausanne Trilogue Play). Elaboré au Centre d'Etude de la Famille à Lausanne avec Elisabeth Fivaz-Depeursinge, cette situation se prête aussi bien à l'évaluation des interactions familiales à des fins de recherche que comme outil clinique pour des interventions thérapeutiques, objectif de la consultance. Etant aussi à l'aube de ma retraite professionnelle, j'ai retracé dans cet article des situations où j'étais impliquée personnellement comme consultante-thérapeute avec différents aménagements possibles du jeu (jeu père-mère-bébé, jeu prénatal avec une poupée, jeu thérapeute-mère-bébé). Ces descriptions cliniques s'accompagnent de réflexions sur les propriétés de la consultance, les spécificités des interventions thérapeutiques sur les relations familiales précoces et l'usage de la vidéo: en quelque sorte un passage de témoin, une transmission d'un certain savoir-faire.

Anaerobically controlled expression system derived from the arcDABC operon of Pseudomonas aeruginosa: application to lipase production.

The anaerobically inducible arcDABC operon encodes the enzymes of the arginine deiminase pathway in Pseudomonas aeruginosa. Upon induction, the arcAB mRNAs and proteins reach high intracellular levels, because of a strong anaerobically controlled promoter and mRNA processing in arcD, leading to stable downstream transcripts. We explored the usefulness of this system for the construction of expression vectors. The lacZ gene of Escherichia coli was expressed to the highest levels when fused close to the arc promoter. Insertion of lacZ further downstream into arcA or arcB did not stabilize the intrinsically unstable lacZ mRNA. On the contrary, lacZ mRNA appeared to be a vulnerable endonuclease target destabilizing arcAB mRNAs in the 5'-to-3' direction in P. aeruginosa. The native arc promoter was modified for optional expression in the -10 sequence and in the -40 region, which is a binding site for the anaerobic regulator ANR. In P. aeruginosa grown either anaerobically or with oxygen limitation in unshaken cultures, this promoter was stronger than the induced tac promoter. The P. aeruginosa lipAH genes, which encode extracellular lipase and lipase foldase, respectively, were fused directly to the modified arc promoter in an IncQ vector plasmid. Semianaerobic static cultures of P. aeruginosa PAO1 carrying this recombinant plasmid overproduced extracellular lipase 30-fold during stationary phase compared with the production by strain PAO1 without the plasmid. Severe oxygen limitation, in contrast, resulted in poor lipase productivity despite effective induction of the ANR-dependent promoter, suggesting that secretion of active lipase is blocked by the absence of oxygen. In conclusion, the modified arc promoter is useful for driving the expression of cloned genes in P. aeruginosa during oxygen-limited growth and stationary phase.

Development of a high throughput PCR to detect Coxiella burnetii and its application in a diagnostic laboratory over a 7-year period.

Q fever is a worldwide zoonotic infectious disease due to Coxiella burnetii. The clinical presentation may be acute (pneumonia and/or hepatitis) or chronic (most commonly endocarditis). Diagnosis mainly relies on serology and PCR. We therefore developed a quantitative real-time PCR. We first tested blindly its performance on various clinical samples and then, when thoroughly validated, we applied it during a 7-year period for the diagnosis of both acute and persistent C. burnetii infection. Analytical sensitivity (< 10 copies/PCR) was excellent. When tested blindly on 183 samples, the specificity of the PCR was 100% (142/142) and the sensitivity was 71% (29/41). The sensitivity was 88% (7/8) on valvular samples, 69% (20/29) on blood samples and 50% (2/4) on urine samples. This new quantitative PCR was then successfully applied for the diagnosis of acute Q fever and endovascular infection due to C. burnetii, allowing the diagnosis of Q fever in six patients over a 7-year period. During a local small cluster of cases, the PCR was also applied to blood from 1355 blood donors; all were negative confirming the high specificity of this test. In conclusion, we developed a highly specific method with excellent sensitivity, which may be used on sera for the diagnosis of acute Q fever and on various samples such as sera, valvular samples, aortic specimens, bone and liver, for the diagnosis of persistent C. burnetii infection.