Electrophoretic mobility of supercoiled, catenated and knotted DNA molecules.

We systematically varied conditions of two-dimensional (2D) agarose gel electrophoresis to optimize separation of DNA topoisomers that differ either by the extent of knotting, the extent of catenation or the extent of supercoiling. To this aim we compared electrophoretic behavior of three different families of DNA topoisomers: (i) supercoiled DNA molecules, where supercoiling covered the range extending from covalently closed relaxed up to naturally supercoiled DNA molecules; (ii) postreplicative catenanes with catenation number increasing from 1 to ∼15, where both catenated rings were nicked; (iii) knotted but nicked DNA molecules with a naturally arising spectrum of knots. For better comparison, we studied topoisomer families where each member had the same total molecular mass. For knotted and supercoiled molecules, we analyzed dimeric plasmids whereas catenanes were composed of monomeric forms of the same plasmid. We observed that catenated, knotted and supercoiled families of topoisomers showed different reactions to changes of agarose concentration and voltage during electrophoresis. These differences permitted us to optimize conditions for their separation and shed light on physical characteristics of these different types of DNA topoisomers during electrophoresis.

Muscle moment-arms: a key element in muscle-force estimation.

A clear and rigorous definition of muscle moment-arms in the context of musculoskeletal systems modelling is presented, using classical mechanics and screw theory. The definition provides an alternative to the tendon excursion method, which can lead to incorrect moment-arms if used inappropriately due to its dependency on the choice of joint coordinates. The definition of moment-arms, and the presented construction method, apply to musculoskeletal models in which the bones are modelled as rigid bodies, the joints are modelled as ideal mechanical joints and the muscles are modelled as massless, frictionless cables wrapping over the bony protrusions, approximated using geometric surfaces. In this context, the definition is independent of any coordinate choice. It is then used to solve a muscle-force estimation problem for a simple 2D conceptual model and compared with an incorrect application of the tendon excursion method. The relative errors between the two solutions vary between 0% and 100%.

3D noise power spectrum applied on clinical mdct scanners: effects of reconstruction algorithms and reconstruction filters

The noise power spectrum (NPS) is the reference metric for understanding the noise content in computed tomography (CT) images. To evaluate the noise properties of clinical multidetector (MDCT) scanners, local 2D and 3D NPSs were computed for different acquisition reconstruction parameters.A 64- and a 128-MDCT scanners were employed. Measurements were performed on a water phantom in axial and helical acquisition modes. CT dose index was identical for both installations. Influence of parameters such as the pitch, the reconstruction filter (soft, standard and bone) and the reconstruction algorithm (filtered-back projection (FBP), adaptive statistical iterative reconstruction (ASIR)) were investigated. Images were also reconstructed in the coronal plane using a reformat process. Then 2D and 3D NPS methods were computed.In axial acquisition mode, the 2D axial NPS showed an important magnitude variation as a function of the z-direction when measured at the phantom center. In helical mode, a directional dependency with lobular shape was observed while the magnitude of the NPS was kept constant. Important effects of the reconstruction filter, pitch and reconstruction algorithm were observed on 3D NPS results for both MDCTs. With ASIR, a reduction of the NPS magnitude and a shift of the NPS peak to the low frequency range were visible. 2D coronal NPS obtained from the reformat images was impacted by the interpolation when compared to 2D coronal NPS obtained from 3D measurements.The noise properties of volume measured in last generation MDCTs was studied using local 3D NPS metric. However, impact of the non-stationarity noise effect may need further investigations.

Flow-targeted inversion-prepared b-TFE coronary MR angiography: initial results in patients.

PURPOSE: Visualization of coronary blood flow in the right and left coronary system in volunteers and patients by means of a modified inversion-prepared bright-blood coronary magnetic resonance angiography (cMRA) sequence. MATERIALS AND METHODS: cMRA was performed in 14 healthy volunteers and 19 patients on a 1.5 Tesla MR system using a free-breathing 3D balanced turbo field echo (b-TFE) sequence with radial k-space sampling. For magnetization preparation a slab selective and a 2D selective inversion pulse were used for the right and left coronary system, respectively. cMRA images were evaluated in terms of clinically relevant stenoses (< 50 %) and compared to conventional catheter angiography. Signal was measured in the coronary arteries (coro), the aorta (ao) and in the epicardial fat (fat) to determine SNR and CNR. In addition, maximal visible vessel length, and vessel border definition were analyzed. RESULTS: The use of a selective inversion pre-pulse allowed direct visualization of the coronary blood flow in the right and left coronary system. The measured SNR and CNR, vessel length, and vessel sharpness in volunteers (SNR coro: 28.3 +/- 5.0; SNR ao: 37.6 +/- 8.4; CNR coro-fat: 25.3 +/- 4.5; LAD: 128.0 cm +/- 8.8; RCA: 74.6 cm +/- 12.4; Sharpness: 66.6 % +/- 4.8) were slightly increased compared to those in patients (SNR coro: 24.1 +/- 3.8; SNR ao: 33.8 +/- 11.4; CNR coro-fat: 19.9 +/- 3.3; LAD: 112.5 cm +/- 13.8; RCA: 69.6 cm +/- 16.6; Sharpness: 58.9 % +/- 7.9; n.s.). In the patient study the assessment of 42 coronary segments lead to correct identification of 10 clinically relevant stenoses. CONCLUSION: The modification of a previously published inversion-prepared cMRA sequence allowed direct visualization of the coronary blood flow in the right as well as in the left coronary system. In addition, this sequence proved to be highly sensitive regarding the assessment of clinically relevant stenotic lesions.

The development of an automatic recognition system for earmark and earprint comparisons

The value of earmarks as an efficient means of personal identification is still subject to debate. It has been argued that the field is lacking a firm systematic and structured data basis to help practitioners to form their conclusions. Typically, there is a paucity of research guiding as to the selectivity of the features used in the comparison process between an earmark and reference earprints taken from an individual. This study proposes a system for the automatic comparison of earprints and earmarks, operating without any manual extraction of key-points or manual annotations. For each donor, a model is created using multiple reference prints, hence capturing the donor within source variability. For each comparison between a mark and a model, images are automatically aligned and a proximity score, based on a normalized 2D correlation coefficient, is calculated. Appropriate use of this score allows deriving a likelihood ratio that can be explored under known state of affairs (both in cases where it is known that the mark has been left by the donor that gave the model and conversely in cases when it is established that the mark originates from a different source). To assess the system performance, a first dataset containing 1229 donors elaborated during the FearID research project was used. Based on these data, for mark-to-print comparisons, the system performed with an equal error rate (EER) of 2.3% and about 88% of marks are found in the first 3 positions of a hitlist. When performing print-to-print transactions, results show an equal error rate of 0.5%. The system was then tested using real-case data obtained from police forces.

Pore-scale modeling of two-phase flow instabilities in porous media

Les problèmes d'écoulements multiphasiques en média poreux sont d'un grand intérêt pour de nombreuses applications scientifiques et techniques ; comme la séquestration de C02, l'extraction de pétrole et la dépollution des aquifères. La complexité intrinsèque des systèmes multiphasiques et l'hétérogénéité des formations géologiques sur des échelles multiples représentent un challenge majeur pour comprendre et modéliser les déplacements immiscibles dans les milieux poreux. Les descriptions à l'échelle supérieure basées sur la généralisation de l'équation de Darcy sont largement utilisées, mais ces méthodes sont sujettes à limitations pour les écoulements présentant de l'hystérèse. Les avancées récentes en terme de performances computationnelles et le développement de méthodes précises pour caractériser l'espace interstitiel ainsi que la distribution des phases ont favorisé l'utilisation de modèles qui permettent une résolution fine à l'échelle du pore. Ces modèles offrent un aperçu des caractéristiques de l'écoulement qui ne peuvent pas être facilement observées en laboratoire et peuvent être utilisé pour expliquer la différence entre les processus physiques et les modèles à l'échelle macroscopique existants. L'objet premier de la thèse se porte sur la simulation numérique directe : les équations de Navier-Stokes sont résolues dans l'espace interstitiel et la méthode du volume de fluide (VOF) est employée pour suivre l'évolution de l'interface. Dans VOF, la distribution des phases est décrite par une fonction fluide pour l'ensemble du domaine et des conditions aux bords particulières permettent la prise en compte des propriétés de mouillage du milieu poreux. Dans la première partie de la thèse, nous simulons le drainage dans une cellule Hele-Shaw 2D avec des obstacles cylindriques. Nous montrons que l'approche proposée est applicable même pour des ratios de densité et de viscosité très importants et permet de modéliser la transition entre déplacement stable et digitation visqueuse. Nous intéressons ensuite à l'interprétation de la pression capillaire à l'échelle macroscopique. Nous montrons que les techniques basées sur la moyenne spatiale de la pression présentent plusieurs limitations et sont imprécises en présence d'effets visqueux et de piégeage. Au contraire, une définition basée sur l'énergie permet de séparer les contributions capillaires des effets visqueux. La seconde partie de la thèse est consacrée à l'investigation des effets d'inertie associés aux reconfigurations irréversibles du ménisque causé par l'interface des instabilités. Comme prototype pour ces phénomènes, nous étudions d'abord la dynamique d'un ménisque dans un pore angulaire. Nous montrons que, dans un réseau de pores cubiques, les sauts et reconfigurations sont si fréquents que les effets d'inertie mènent à différentes configurations des fluides. A cause de la non-linéarité du problème, la distribution des fluides influence le travail des forces de pression, qui, à son tour, provoque une chute de pression dans la loi de Darcy. Cela suggère que ces phénomènes devraient être pris en compte lorsque que l'on décrit l'écoulement multiphasique en média poreux à l'échelle macroscopique. La dernière partie de la thèse s'attache à démontrer la validité de notre approche par une comparaison avec des expériences en laboratoire : un drainage instable dans un milieu poreux quasi 2D (une cellule Hele-Shaw avec des obstacles cylindriques). Plusieurs simulations sont tournées sous différentes conditions aux bords et en utilisant différents modèles (modèle intégré 2D et modèle 3D) afin de comparer certaines quantités macroscopiques avec les observations au laboratoire correspondantes. Malgré le challenge de modéliser des déplacements instables, où, par définition, de petites perturbations peuvent grandir sans fin, notre approche numérique apporte de résultats satisfaisants pour tous les cas étudiés. - Problems involving multiphase flow in porous media are of great interest in many scientific and engineering applications including Carbon Capture and Storage, oil recovery and groundwater remediation. The intrinsic complexity of multiphase systems and the multi scale heterogeneity of geological formations represent the major challenges to understand and model immiscible displacement in porous media. Upscaled descriptions based on generalization of Darcy's law are widely used, but they are subject to several limitations for flow that exhibit hysteric and history- dependent behaviors. Recent advances in high performance computing and the development of accurate methods to characterize pore space and phase distribution have fostered the use of models that allow sub-pore resolution. These models provide an insight on flow characteristics that cannot be easily achieved by laboratory experiments and can be used to explain the gap between physical processes and existing macro-scale models. We focus on direct numerical simulations: we solve the Navier-Stokes equations for mass and momentum conservation in the pore space and employ the Volume Of Fluid (VOF) method to track the evolution of the interface. In the VOF the distribution of the phases is described by a fluid function (whole-domain formulation) and special boundary conditions account for the wetting properties of the porous medium. In the first part of this thesis we simulate drainage in a 2-D Hele-Shaw cell filled with cylindrical obstacles. We show that the proposed approach can handle very large density and viscosity ratios and it is able to model the transition from stable displacement to viscous fingering. We then focus on the interpretation of the macroscopic capillary pressure showing that pressure average techniques are subject to several limitations and they are not accurate in presence of viscous effects and trapping. On the contrary an energy-based definition allows separating viscous and capillary contributions. In the second part of the thesis we investigate inertia effects associated with abrupt and irreversible reconfigurations of the menisci caused by interface instabilities. As a prototype of these phenomena we first consider the dynamics of a meniscus in an angular pore. We show that in a network of cubic pores, jumps and reconfigurations are so frequent that inertia effects lead to different fluid configurations. Due to the non-linearity of the problem, the distribution of the fluids influences the work done by pressure forces, which is in turn related to the pressure drop in Darcy's law. This suggests that these phenomena should be taken into account when upscaling multiphase flow in porous media. The last part of the thesis is devoted to proving the accuracy of the numerical approach by validation with experiments of unstable primary drainage in a quasi-2D porous medium (i.e., Hele-Shaw cell filled with cylindrical obstacles). We perform simulations under different boundary conditions and using different models (2-D integrated and full 3-D) and we compare several macroscopic quantities with the corresponding experiment. Despite the intrinsic challenges of modeling unstable displacement, where by definition small perturbations can grow without bounds, the numerical method gives satisfactory results for all the cases studied.

Stable masking by H-2Dd cis ligand limits Ly49A relocalization to the site of NK cell/target cell contact.

Ly49A is an inhibitory receptor, which counteracts natural killer (NK) cell activation on the engagement with H-2D(d) (D(d)) MHC class I molecules (MHC-I) on target cells. In addition to binding D(d) on apposed membranes, Ly49A interacts with D(d) ligand expressed in the plane of the NK cells' membrane. Indeed, multivalent, soluble MHC-I ligand binds inefficiently to Ly49A unless the NK cells' D(d) complexes are destroyed. However, it is not known whether masked Ly49A remains constitutively associated with cis D(d) also during target cell interaction. Alternatively, it is possible that Ly49A has to be unmasked to significantly interact with its ligand on target cells. These two scenarios suggest distinct roles of Ly49A/D(d) cis interaction for NK cell function. Here, we show that Ly49A contributes to target cell adhesion and efficiently accumulates at synapses with D(d)-expressing target cells when NK cells themselves lack D(d). When NK cells express D(d), Ly49A no longer contributes to adhesion, and ligand-driven recruitment to the cellular contact site is strongly reduced. The destruction of D(d) complexes on NK cells, which unmasks Ly49A, is necessary and sufficient to restore Ly49A adhesive function and recruitment to the synapse. Thus, cis D(d) continuously sequesters a considerable fraction of Ly49A receptors, preventing efficient Ly49A recruitment to the synapse with D(d)+ target cells. The reduced number of Ly49A receptors that can functionally interact with D(d) on target cells explains the modest inhibitory capacity of Ly49A in D(d) NK cells. This property renders Ly49A NK cells more sensitive to react to diseased host cells.

Développement de l'interprétation quantitative de la sismique réflexion lacustre : application de l'AVO aux sédiments quaternaires dans le lac Léman

Résumé Des développements antérieurs, au sein de l'Institut de Géophysique de Lausanne, ont permis de développer des techniques d'acquisition sismique et de réaliser l'interprétation des données sismique 2D et 3D pour étudier la géologie de la région et notamment les différentes séquences sédimentaires du Lac Léman. Pour permettre un interprétation quantitative de la sismique en déterminant des paramètres physiques des sédiments la méthode AVO (Amplitude Versus Offset) a été appliquée. Deux campagnes sismiques lacustres, 2D et 3D, ont été acquises afin de tester la méthode AVO dans le Grand Lac sur les deltas des rivières. La géométrie d'acquisition a été repensée afin de pouvoir enregistrer les données à grands déports. Les flûtes sismiques, mises bout à bout, ont permis d'atteindre des angles d'incidence d'environ 40˚ . Des récepteurs GPS spécialement développés à cet effet, et disposés le long de la flûte, ont permis, après post-traitement des données, de déterminer la position de la flûte avec précision (± 0.5 m). L'étalonnage de nos hydrophones, réalisé dans une chambre anéchoïque, a permis de connaître leur réponse en amplitude en fonction de la fréquence. Une variation maximale de 10 dB a été mis en évidence entre les capteurs des flûtes et le signal de référence. Un traitement sismique dont l'amplitude a été conservée a été appliqué sur les données du lac. L'utilisation de l'algorithme en surface en consistante a permis de corriger les variations d'amplitude des tirs du canon à air. Les sections interceptes et gradients obtenues sur les deltas de l'Aubonne et de la Dranse ont permis de produire des cross-plots. Cette représentation permet de classer les anomalies d'amplitude en fonction du type de sédiments et de leur contenu potentiel en gaz. L'un des attributs qui peut être extrait des données 3D, est l'amplitude de la réflectivité d'une interface sismique. Ceci ajoute une composante quantitative à l'interprétation géologique d'une interface. Le fond d'eau sur le delta de l'Aubonne présente des anomalies en amplitude qui caractérisent les chenaux. L'inversion de l'équation de Zoeppritz par l'algorithme de Levenberg-Marquardt a été programmée afin d'extraire les paramètres physiques des sédiments sur ce delta. Une étude statistique des résultats de l'inversion permet de simuler la variation de l'amplitude en fonction du déport. On a obtenu un modèle dont la première couche est l'eau et dont la seconde est une couche pour laquelle V P = 1461 m∕s, ρ = 1182 kg∕m3 et V S = 383 m∕s. Abstract A system to record very high resolution (VHR) seismic data on lakes in 2D and 3D was developed at the Institute of Geophysics, University of Lausanne. Several seismic surveys carried out on Lake Geneva helped us to better understand the geology of the area and to identify sedimentary sequences. However, more sophisticated analysis of the data such as the AVO (Amplitude Versus Offset) method provides means of deciphering the detailed structure of the complex Quaternary sedimentary fill of the Lake Geneva trough. To study the physical parameters we applied the AVO method at some selected places of sediments. These areas are the Aubonne and Dranse River deltas where the configurations of the strata are relatively smooth and the discontinuities between them easy to pick. A specific layout was developed to acquire large incidence angle. 2D and 3D seismic data were acquired with streamers, deployed end to end, providing incidence angle up to 40˚ . One or more GPS antennas attached to the streamer enabled us to calculate individual hydrophone positions with an accuracy of 50 cm after post-processing of the navigation data. To ensure that our system provides correct amplitude information, our streamer sensors were calibrated in an anechoic chamber using a loudspeaker as a source. Amplitude variations between the each hydrophone were of the order of 10 dB. An amplitude correction for each hydrophone was computed and applied before processing. Amplitude preserving processing was then carried out. Intercept vs. gradient cross-plots enable us to determine that both geological discontinuities (lacustrine sediments/moraine and moraine/molasse) have well defined trends. A 3D volume collected on the Aubonne river delta was processed in order ro obtain AVO attributes. Quantitative interpretation using amplitude maps were produced and amplitude maps revealed high reflectivity in channels. Inversion of the water bottom of the Zoeppritz equation using the Levenberg-Marquadt algorithm was carried out to estimate V P , V S and ρ of sediments immediately under the lake bottom. Real-data inversion gave, under the water layer, a mud layer with V P = 1461 m∕s, ρ = 1182 kg∕m3 et V S = 383 m∕s.

The role of cisplatin and NAMI-A plasma-protein interactions in relation to combination therapy

The aim of the study is to evaluate the differences of protein binding of NAMI-A, a new ruthenium drug endowed with selective antimetastatic properties, and of cisplatin and to ascertain the possibility to use two drugs based on heavy metals in combination to treat solid tumour metastases. For this purpose, we have developed a technique that allows the proteins, to which metal drugs bind, to be identified from real protein mixtures. Following incubation with the drugs, the bands containing platinum and/or ruthenium are separated by native PAGE, SDS-PAGE and 2D gel electrophoresis, and identified using laser ablation inductively coupled plasma mass spectrometry. Both drugs interact with essentially the same proteins which, characterised by proteomics, are human serum albumin precursor, macroglobulin alpha 2 and human serotransferrin precursor. The interactions of NAMI-A are largely reversible whereas cisplatin forms stronger interactions that are less reversible. These data correlate well with the MCa mammary carcinoma model on which full doses of NAMI-A combined with cisplatin show additive effects as compared to each treatment taken alone, independently of whether NAMI-A precedes or follows cisplatin. Furthermore, the implication from this study is that the significantly lower toxicity of NAMI-A, compared to cisplatin, could be a consequence of differences in the mode of binding to plasma proteins, involving weaker interactions compared to cisplatin.

Searching for Novel Cellular Targets of the Hepatitis C Virus NS3-4A Protease

Background: The hepatitis C virus (HCV) NS3-4A protease isnot only an essential component of the viral replication complexand a prime target for antiviral intervention but also a key playerin the persistence and pathogenesis of HCV. It cleaves andthereby inactivates two crucial adaptor proteins in viral RNAsensing and innate immunity (MAVS and TRIF) as well as aphosphatase involved in growth factor signaling (TC-PTP). Theaim of this ongoing study is to identify novel cellular targets ofthe NS3-4A protease.Methods: Cell lines inducibly expressing the NS3-4A proteasewere established using a tetracycline-regulated geneexpression system. Cells were analyzed in basal as well asinterferon-α-stimulated states. Two-dimensional difference gelelectrophoresis (2D-DIGE) and stable isotopic labeling usingamino acids in cell culture (SILAC) proteomics analysescoupled with mass spectrometry were employed to search forcellular substrates of NS3-4A.Results: A number of candidate cellular targets have beenidentified by these proteomics approaches. These are currentlybeing validated by different experimental techniques. In parallel,we are in the process of further defining the determinants forsubstrate specificity of the NS3-4A protease.Conclusions: The identification of novel cellular targets of theHCV NS3-4A protase should yield new insights into thepathogenesis of hepatitis C and may reveal novel targets forantiviral intervention.

Changes of MAP2 phosphorylation during brain development.

The microtubule-associated protein MAP2 is essential for development of early neuronal morphology and maintenance of adult neuronal morphology. Several splice variants exist, MAP2a-d, with a lack of MAP2a in cat brain. MAP2 is widely used as a neuronal marker. In this study we compared five monoclonal antibodies (MAbs) against MAP2. They show differences in the immunocytochemical distribution of MAP2 isoforms during development of the visual cortex and cerebellum of the cat. Local and temporal differences were seen with MAb AP18, an antibody directed against a phosphorylation-dependent epitope near the N-terminal end. In large pyramidal dendrites in visual cortex, the AP18 epitope remained in parts immunoreactive after treatment with alkaline phosphatase. Three MAbs, AP14, MT-01, and MT-02, recognized the central region of the MAP2b molecule, which is not present in MAP2c and 2d, and reacted with phosphorylation-independent epitopes. During the first postnatal week the immunostaining in cerebellum differed between antibodies in that some cellular elements in external and internal granular layers and Purkinje cells were stained to various degrees, whereas at later stages staining patterns were similar. At early stages, antibody MT-02 stained cell bodies and dendrites in cerebral cortex and cerebellum. With progressing maturation, immunoreactivity became restricted to distal parts of apical dendrites of pyramidal cells and was absent from perikarya and finer proximal dendrites in cortex. MT-02 did not stain MAP2 in cerebellum of adult animals. This study demonstrates that the immunocytochemical detection of MAP2 depends on modifications such as phosphorylation and conformational changes of the molecule, and that MAP2 staining patterns differ between MAbs. Phosphorylation and specific conformations in the molecule may be essential for modulating function and molecular stability of MAP2, and monoclonal antibodies against such sites may provide tools for studying the functional role of modifications.

Role of CLOCK and circadian rhythms in calcium homeostasis

Le maintien d'une concentration sanguine constante de calcium est d'une importance cruciale et trois organes participent à la balance calcique normale : les reins, les intestins et les os. La concentration plasmatique de calcium est strictement régulée par l'hormone parathyroïdienne (PTH) et par la vitamine D. Des variations circadiennes de la PTH, de la vitamine D ainsi que du calcium plasmatique ont été décrites précédemment chez l'humain ainsi que chez le rat. Ces rythmes de PTH dans le sérum sont importants pour la régulation du remodelage de l'os. En effet, il a été montré chez les souris C57BL/6J que des injections de PTH une fois par jour mènent à une augmentation de la densité minérale de l'os alors que l'infusion en continu de PTH est associée à une diminution de cette densité. La vitamine D joue également un rôle fondamental dans la physiologie osseuse, car un déficit en vitamine D peut conduire à une ostéomalacie. Cependant la fonction des oscillations de vitamine D au niveau de l'homéostasie osseuse reste inconnue. L'horloge circadienne est un système interne de contrôle biologique du temps générant des rythmes de 24 heures dans l'expression des gènes, ainsi que dans la physiologie et le comportement. Ce contrôle s'opère par des boucles rétroactives positives et négatives de l'expression de gènes circadiens tels que CLOCK, BMAL1, CRY1 et 2 ou PERI et 2. Dans ce travail, nous avons émis l'hypothèse que l'homéostasie calcique est sous le contrôle de l'horloge circadienne. Dans un premier temps, nous avons montré chez les souris C57BL/6J des variations journalières des concentrations de calcium, de PTH et de vitamine D dans le sang, ainsi que de calcium dans les urines. Nous avons également démontré des changements au niveau de l'expression rénale des gènes importants dans l'homéostasie du calcium, tant au niveau de l'ARN messager que des protéines. Ensuite, pour analyser le rôle du système de l'horloge circadienne dans l'homéostasie du calcium, nous avons étudié des souris dans lesquelles a été supprimé le gène CLOCK crucial pour la fonction de l'horloge et nous avons comparé ces souris à des souris de type sauvage de même portée. Les souris CLOCK-I- étaient hypercalciuriques à chaque moment de la journée. Cependant le rythme circadien de l'excrétion de calcium était préservé. Le taux de calcium plasmatique ne différait pas entre les génotypes, mais les souris CLOCK -/- ne montraient pas de variations journalières de ce paramètre. Une perte du rythme journalier était également observée pour les niveaux de vitamine D, perte qui pourrait être une cause de l'altération de la micro-architecture osseuse révélée chez les souris CLOCK-/-. En effet, ces souris montrent une diminution du nombre de trabécules, de leur volume ainsi que de leur surface, ce qui suggère la présence d'ostéoporose. Nous avons également trouvé que le rythme de l'expression de l'ARN messager de CYP27B1 était aboli dans les reins des souris CLOCK -/-, ce qui peut expliquer l'altération du rythme de la vitamine D. Les taux sanguins de PTH étaient comparables entre les souris CLOCK -/- et de type sauvage. Dans les reins, une augmentation de l'expression de l'ARN messager de TRPV5 et NCX1 a été constatée, ce qui suggérerait une augmentation de la réabsorption de calcium dans le tubule convoluté distal et dans le tubule connecteur. Dans les intestins, la réabsorption calcique était diminuée, chez les souris CLOCK-I-, fait confirmé par une diminution des niveaux d'ARN messager de TRPV6 et PMCAL. En résumé, la suppression du gène CLOCK chez les souris a conduit à une hypercalciurie, une altération du rythme des taux plasmatiques de calcium et de vitamine D et à une détérioration de l'architecture osseuse. Pour conclure, ces résultats montrent que l'horloge circadienne est essentielle à l'homéostasie calcique ainsi qu'à la physiologie des os. - L'ostéoporose affecte environ 22 millions de femmes et 5.5 millions d'hommes en Europe, réduisant significativement leur qualité de vie et a causé 3.5 millions de nouvelles fractures en 2010. Les dépenses totales liées à ces fractures ont atteint 37 milliards d'euro et ce coût devrait augmenter de 25% d'ici à 2025. Le nombre de nouvelles fractures dues à l'ostéoporose à travers le monde est estimé à environ 1000 par heure. Parmi les causes de l'ostéoporose, le déficit én calcium et/ou en vitamine D joue un rôle important, mais il existe également des causes génétiques ou liées à des facteurs comme les hormones sexuelles (estrogènes, testostérone), l'âge, le tabac, le poids corporel, certains médicaments,... La vie est rythmique : ceci est dû à l'alternance naturelle du jour et de la nuit et de ses effets sur le corps. La prise alimentaire, par exemple, est un processus qui a lieu pendant la phase active, qui est prévisible (il se produit toujours au même moment) et qui peut être anticipé par le corps. Pour cela, une horloge interne est présente dans chaque cellule du corps et est synchronisée par la lumière du jour, entre autres stimuli. Cette horloge indique la phase du jour et régule l'expression de gènes impliqués dans les différents processus qui nécessitent une anticipation. Pendant mon travail de thèse, je me suis demandé si des îythmes circadiens (c'est-à-dire d'une durée d'environ 24 heures et indépendants des stimuli externes) étaient observables'pour les gènes régulant les flux de calcium dans le corps et si l'interruption de ces rythmes pouvait mener à des altérations de la qualité de l'os. J'ai d'abord travaillé avec des souris normales et j'ai pu montrer la présence de rythmes au niveau du calcium sanguin et urinaire, mais également au niveau des hormones et gènes qui contrôlent le métabolisme du calcium dans le corps, comme la vitamine D et l'hormone parathyroidienne. De manière intéressante, j'ai observé que la plupart de ces gènes ont un rythme synchronisé. J'ai ensuite utilisé un modèle de souris dans lequel l'horloge interne a été génétiquement invalidée et j'ai montré que ces souris présentent une augmentation de leur excrétion urinaire de calcium et un rythme circadien altéré de la vitamine D dans le sang. Ces souris absorbent aussi moins bien le calcium intestinal et présentent une ostéoporose marquée. Ce travail montre donc que l'horloge interne est nécessaire pour établir un rythme circadiens de certains facteurs influant les flux de calcium dans l'organisme, comme la vitamine D, et que la perturbation de ces rythmes mène à une dérégulation du métabolisme osseux. Ainsi, la perturbation de l'horloge interne peut causer une ostéoporose et une hypercalciurie qui pourraient aboutir à la formation de fractures et de calculs rénaux. L'extrapolation de ces observations chez l'homme ou à des changements plus subtiles des rythmes circadiens, comme le décalage horaire, restent à montrer. Cette recherche a démontré que les rythmes circadiens des mécanismes de régulation des flux de calcium dans l'organisme sont essentiels au maintien d'un squelette normal et suggère que les perturbations des rythmes circadiens pourraient être une nouvelle cause de l'ostéoporose. - Maintaining constant calcium concentration in the plasma is of a crucial importance and three organs participate in normal calcium balance - kidney, gut and bone. Plasma calcium concentration is strictly regulated by parathyroid hormone (PTH) and vitamin D. Circadian variations of PTH, vitamin D and plasma calcium were previously described in humans, as well as in rats. Rhythms in serum PTH are important for balanced bone remodelling. Indeed in C57BL/6J mice, PTH injection once per day leads to an increase in bone mineral density (BMD), whilst continuous infusion is associated with decreased BMD. Vitamin D also plays a crucial role in bone physiology, since the deficiency in vitamin D can lead to rickets/osteomalacia. However, the role of vitamin D rhythms in bone homeostasis remains unknown. The circadian clock is an. internal time-keeping system generating rhythms in gene expression with 24h periodicity, in physiology and in behaviour. It is operated by positive- and negative-feedback loops of circadian genes, such as CLOCK, BMAL1, CRY1 and 2 or PERI and 2. In this work, we hypothesized, that calcium homeostasis is under the control of the circadian clock. First, we showed daily variations in urinary calcium and serum calcium, PTH and l,25(OH)2 vitamin D, together with renal mRNA and protein levels of genes involved in calcium homeostasis in C57BL/6J mice. Second, and to investigate the role of the circadian clock system in calcium handling, we studied mice lacking the gene CLOCK crucial for fonction of the clock system and compared them to the WT littermates. CLOCK-/- mice were hypercalciuric at all timepoints of the day. However, the circadian rhythm of calcium excretion was preserved. Serum calcium levels did not differ between the genotypes, but CLOCK-/- mice did not exhibit daily variation for this parameter. Loss of rhythm was observed also for serum l,25(OH)2 vitamin D levels, which may be one of the causes of altered bone microarchitecture that was revealed in CLOCK-/- mice. They displayed increased trabecular separation and decreased trabecular number, trabecular bone volume and trabecular bone surface, suggestive of osteoporosis. We found that the rhythm of the mRNA expression of CYP27B1 was abolished in the kidney of CLOCK-/- mice, which could induce the altered rhythm of l,25(OH)2 vitamin. Serum PTH levels were comparable between CLOCK-/- and WT mice. In the kidney, increased mRNA expression of TRPV5 and NCX1 suggests increased calcium reabsorption in the distal convoluted and connecting tubule. In the gut, intestinal calcium absorption was decreased in CLOCK¬/- mice, confirmed by decreased mRNA levels of TRPV6 and PMCA1. In summary, deletion of the CLOCK gene in mice conducts to hypercalciuria, alteration of the rhythm in serum calcium and l,25(OH)2D levels, and impainnent of their bone microarchitecture. In conclusion, these data show that the circadian clock system is essential in calcium homeostasis and bone physiology.

Modélisation par automate cellulaire des phénomènes diagénétiques des plateformes carbonatées : calibration et paramétrage à partir de deux cas d'études : l'Urgonien du Vercors (Crétacé inférieur, SE France) et les Calcaires Gris du Mont Compomolon (Lias, NE Italie)

Une fois déposé, un sédiment est affecté au cours de son enfouissement par un ensemble de processus, regroupé sous le terme diagenèse, le transformant parfois légèrement ou bien suffisamment pour le rendre méconnaissable. Ces modifications ont des conséquences sur les propriétés pétrophysiques qui peuvent être positives ou négatives, c'est-à-dire les améliorer ou bien les détériorer. Une voie alternative de représentation numérique des processus, affranchie de l'utilisation des réactions physico-chimiques, a été adoptée et développée en mimant le déplacement du ou des fluides diagénétiques. Cette méthode s'appuie sur le principe d'un automate cellulaire et permet de simplifier les phénomènes sans sacrifier le résultat et permet de représenter les phénomènes diagénétiques à une échelle fine. Les paramètres sont essentiellement numériques ou mathématiques et nécessitent d'être mieux compris et renseignés à partir de données réelles issues d'études d'affleurements et du travail analytique effectué. La représentation des phénomènes de dolomitisation de faible profondeur suivie d'une phase de dédolomitisation a été dans un premier temps effectuée. Le secteur concerne une portion de la série carbonatée de l'Urgonien (Barrémien-Aptien), localisée dans le massif du Vercors en France. Ce travail a été réalisé à l'échelle de la section afin de reproduire les géométries complexes associées aux phénomènes diagénétiques et de respecter les proportions mesurées en dolomite. De plus, la dolomitisation a été simulée selon trois modèles d'écoulement. En effet, la dédolomitisation étant omniprésente, plusieurs hypothèses sur le mécanisme de dolomitisation ont été énoncées et testées. Plusieurs phases de dolomitisation per ascensum ont été également simulées sur des séries du Lias appartenant aux formations du groupe des Calcaire Gris, localisées au nord-est de l'Italie. Ces fluides diagénétiques empruntent le réseau de fracturation comme vecteur et affectent préférentiellement les lithologies les plus micritisées. Cette étude a permis de mettre en évidence la propagation des phénomènes à l'échelle de l'affleurement. - Once deposited, sediment is affected by diagenetic processes during their burial history. These diagenetic processes are able to affect the petrophysical properties of the sedimentary rocks and also improve as such their reservoir capacity. The modelling of diagenetic processes in carbonate reservoirs is still a challenge as far as neither stochastic nor physicochemical simulations can correctly reproduce the complexity of features and the reservoir heterogeneity generated by these processes. An alternative way to reach this objective deals with process-like methods, which simplify the algorithms while preserving all geological concepts in the modelling process. The aim of the methodology is to conceive a consistent and realistic 3D model of diagenetic overprints on initial facies resulting in petrophysical properties at a reservoir scale. The principle of the method used here is related to a lattice gas automata used to mimic diagenetic fluid flows and to reproduce the diagenetic effects through the evolution of mineralogical composition and petrophysical properties. This method developed in a research group is well adapted to handle dolomite reservoirs through the propagation of dolomitising fluids and has been applied on two case studies. The first study concerns a mid-Cretaceous rudist and granular platform of carbonate succession (Urgonian Fm., Les Gorges du Nan, Vercors, SE France), in which several main diagenetic stages have been identified. The modelling in 2D is focused on dolomitisation followed by a dédolomitisation stage. For the second study, data collected from outcrops on the Venetian platform (Lias, Mont Compomolon NE Italy), in which several diagenetic stages have been identified. The main one is related to per ascensum dolomitisation along fractures. In both examples, the evolution of the effects of the mimetic diagenetic fluid on mineralogical composition can be followed through space and numerical time and help to understand the heterogeneity in reservoir properties. Carbonates, dolomitisation, dédolomitisation, process-like modelling, lattice gas automata, random walk, memory effect.

Evaluation and comparison of current fetal ultrasound image segmentation methods for biometric measurements: a grand challenge.

This paper presents the evaluation results of the methods submitted to Challenge US: Biometric Measurements from Fetal Ultrasound Images, a segmentation challenge held at the IEEE International Symposium on Biomedical Imaging 2012. The challenge was set to compare and evaluate current fetal ultrasound image segmentation methods. It consisted of automatically segmenting fetal anatomical structures to measure standard obstetric biometric parameters, from 2D fetal ultrasound images taken on fetuses at different gestational ages (21 weeks, 28 weeks, and 33 weeks) and with varying image quality to reflect data encountered in real clinical environments. Four independent sub-challenges were proposed, according to the objects of interest measured in clinical practice: abdomen, head, femur, and whole fetus. Five teams participated in the head sub-challenge and two teams in the femur sub-challenge, including one team who tackled both. Nobody attempted the abdomen and whole fetus sub-challenges. The challenge goals were two-fold and the participants were asked to submit the segmentation results as well as the measurements derived from the segmented objects. Extensive quantitative (region-based, distance-based, and Bland-Altman measurements) and qualitative evaluation was performed to compare the results from a representative selection of current methods submitted to the challenge. Several experts (three for the head sub-challenge and two for the femur sub-challenge), with different degrees of expertise, manually delineated the objects of interest to define the ground truth used within the evaluation framework. For the head sub-challenge, several groups produced results that could be potentially used in clinical settings, with comparable performance to manual delineations. The femur sub-challenge had inferior performance to the head sub-challenge due to the fact that it is a harder segmentation problem and that the techniques presented relied more on the femur's appearance.

Investigation of discrete imaging models and iterative image reconstruction in differential X-ray phase-contrast tomography.

Differential X-ray phase-contrast tomography (DPCT) refers to a class of promising methods for reconstructing the X-ray refractive index distribution of materials that present weak X-ray absorption contrast. The tomographic projection data in DPCT, from which an estimate of the refractive index distribution is reconstructed, correspond to one-dimensional (1D) derivatives of the two-dimensional (2D) Radon transform of the refractive index distribution. There is an important need for the development of iterative image reconstruction methods for DPCT that can yield useful images from few-view projection data, thereby mitigating the long data-acquisition times and large radiation doses associated with use of analytic reconstruction methods. In this work, we analyze the numerical and statistical properties of two classes of discrete imaging models that form the basis for iterative image reconstruction in DPCT. We also investigate the use of one of the models with a modern image reconstruction algorithm for performing few-view image reconstruction of a tissue specimen.