94 resultados para evaporation crystallization


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of the present study was to develop novel daptomycin-loaded acrylic microparticles with improved release profiles and antibacterial activity against two clinically relevant methicillin-susceptible and methicillin-resistant Staphylococcus aureus strains (MSSA and MRSA, respectively). Daptomycin was encapsulated into poly(methyl methacrylate) (PMMA) and PMMA-Eudragit RL 100 (EUD) microparticles by a double emulsion-solvent evaporation method. For comparison purposes similar formulations were prepared with vancomycin. Particle morphology, size distribution, encapsulation efficiency, surface charge, physicochemical properties, in vitro release and biocompatibility were assessed. Particles exhibited a micrometer size and a spherical morphology. The addition of EUD to the formulation caused a shift in the surface charge of the particles from negative zeta potential values (100% PMMA formulations) to strongly positive. It also improved daptomycin encapsulation efficiency and release, whereas vancomycin encapsulation and release were strongly hindered. Plain and antibiotic-loaded particles presented comparable biocompatibility profiles. The antibacterial activity of the particles was assessed by isothermal microcalorimetry against both MSSA and MRSA. Daptomycin-loaded PMMA-EUD particles presented the highest antibacterial activity against both strains. The addition of 30% EUD to the daptomycin-loaded PMMA particles caused a 40- and 20-fold decrease in the minimum inhibitory (MIC) and bactericidal concentration (MBC) values, respectively, when compared to the 100% PMMA formulations. On the other hand, vancomycin-loaded microparticles presented the highest antibacterial activity in PMMA particles. Unlike conventional methods, isothermal microcalorimetry proved to be a real-time, sensitive and accurate method for assessment of antibacterial activity of antibiotic-loaded polymeric microparticles. Finally, the addition of EUD to formulations proved to be a powerful strategy to improve daptomycin encapsulation efficiency and release, and consequently improving the microparticles activity against two relevant S. aureus strains.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of the present study was to develop novel daptomycin-loaded poly-epsilon-caprolactone (PCL) microparticles with enhanced antibiofilm activity against mature biofilms of clinically relevant bacteria, methicillin-resistant Staphylococcus aureus (MRSA) and polysaccharide intercellular adhesin-positive Staphylococcus epidermidis. Daptomycin was encapsulated into PCL microparticles by a double emulsion-solvent evaporation method. For comparison purposes, formulations containing vancomycin were also prepared. Particle morphology, size distribution, encapsulation efficiency, surface charge, thermal behavior, and in vitro release were assessed. All formulations exhibited a spherical morphology, micrometer size, and negative surface charge. From a very early time stage, the released concentrations of daptomycin and vancomycin were higher than the minimal inhibitory concentration and continued so up to 72 hours. Daptomycin presented a sustained release profile with increasing concentrations of the drug being released up to 72 hours, whereas the release of vancomycin stabilized at 24 hours. The antibacterial activity of the microparticles was assessed by isothermal microcalorimetry against planktonic and sessile MRSA and S. epidermidis. Regarding planktonic bacteria, daptomycin-loaded PCL microparticles presented the highest antibacterial activity against both strains. Isothermal microcalorimetry also revealed that lower concentrations of daptomycin-loaded microparticles were required to completely inhibit the recovery of mature MRSA and S. epidermidis biofilms. Further characterization of the effect of daptomycin-loaded PCL microparticles on mature biofilms was performed by fluorescence in situ hybridization. Fluorescence in situ hybridization showed an important reduction in MRSA biofilm, whereas S. epidermidis biofilms, although inhibited, were not eradicated. In addition, an important attachment of the microparticles to MRSA and S. epidermidis biofilms was observed. Finally, all formulations proved to be biocompatible with both ISO compliant L929 fibroblasts and human MG63 osteoblast-like cells.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

SKI-l/SlP protease is a member of the proprotein convertase family, with several functions in cellular metabolism and homeostasis. It is responsible for the processing of several cellular substrates, including ATF6, SREBPs, and GlcNAc-1- phosphotranspherase. Furthermore, SKI-1/SlP is also responsible for maturation of arenavirus surface glycoprotein into GP1 and GP2 subunits. This processing is a strict requirement in order to achieve fully mature and fusion-competent virions. Furthermore, SKI-1/SlP itself is synthesized as an inactive zymogen, requiring sequential autocatalytic processing at several sites (B'/B and C) in its prodomain in order to mature and become fully active. Our project focused on the analysis of SKI- 1/S1P prodomain in the biogenesis of the active enzyme. In this context we have additionally developed and characterized a novel cell-based sensor for assessment of cellular activity of the enzyme, with a potential application in screening for novel SKI- 1/S1P inhibitors. In a first aim we have analysed the relevance of cleavage motifs found in the enzyme prodomain. Using molecular and biochemistry tools we have identified and characterized a novel C' maturation site. Furthermore, we found that SKI-1/SlP autoprocessing results in intermediates whose catalytic domain remains associated with prodomain fragments of different lengths. Contrasting with other proprotein convertases, incompletely matured intermediates of SKI-1/SlP exhibit full catalytic activity toward selected substrates. In a second aim, we turned our attention to the structural basis of SKI-1/SlP N- terminus assisted folding. Studying the folding and activity of prodomain-truncated forms of the enzyme we found that a minimal folding unit is contained in the AB region. Deletion of the BC sequence affected auto-maturation but not folding, and partial activity was retained. However, the BC region seemed required for complete and full activity. Phylogenetic analyses showed that the AB sequence is highly conserved, while the BC fragment is variable in sequence and length. Specifically, replacement of the human prodomain with that of Drosophila, resulted in a fully mature and active chimeric enzyme, suggesting an evolution process of SKI-1/SlP prodomain towards a more complex arrangement and steps of activation. Overall, the additional data we have produced might provide fundamental knowledge crucial for the development of novel SKI-1/SlP inhibitors while also providing new SKI- 1/S1P variants with potential use in crystallization purpose. -- SKI-l/SlP est une protéase membre de la famille des proprotéines convertases (PCs), avec plusieurs fonctions dans le métabolisme cellulaire et de l'homéostasie. Il est responsable pour la maturation de plusieurs substrats cellulaires, y compris ATF6, SREBPs et GlcNAc-1-phosphotranspherase. SKI-l/SlP est également responsable pour la maturation de la glycoprotéine des arénavirus, une exigence stricte pour atteindre des virions infectieuse. Synthétisé comme un zymogène inactif, SKI-l/SlP nécessite d'un traitement autocatalytique séquentiel sur plusieurs sites (B'/B et C) de son prodomaine afin de devenir pleinement active. Notre projet était axé sur l'analyse de SKI-l/SlP prodomaine dans la biogenèse de l'enzyme. Dans ce contexte, nous avons développé un nouveau senseur-cellulaire pour l'évaluation de l'activité de l'enzyme. Ce dernier pourrait avoir une potentielle application dans l'identification de nouveaux inhibiteurs de SKI-l/SlP. Premièrement, nous avons analysé la pertinence des motifs de clivage trouvés dans le prodomaine de l'enzyme. En utilisant des outils moléculaires et biochimiques, nous avons identifié et caractérisé un nouveau site de maturation (C'). Aussi, nous avons constaté que la maturation de SKI-l/SlP a des intermédiaires dont le domaine catalytique reste associé à des fragments du prodomaine de différentes longueurs. Contrastant avec d'autres PCs, les intermédiaires partiellement matures de SKI-1 / SIP présentent une activité catalytique complète envers des substrats spécifiques. Dans un deuxième but nous avons tourné notre attention sur la base structurelle du pliage de SKI-l/SlP assisté par son N-terminus: En étudiant l'activité et pliage des formes tronquées dans le prodomaine de l'enzyme, nous avons constaté qu'une unité de pliage minimale est contenue dans la région de l'AB. La suppression de la séquence d'auto-BC affecte la maturation mais pas le pliage, et l'activité partielle est maintenue. Cependant, la région BC semble nécessaire pour une activité complète. Les analyses phylogénétiques ont montré que la séquence AB est fortement conservée, tandis que le fragment de BC est variable en longueur et en séquence. En particulier, le remplacement du prodomaine humain avec celui de la drosophile, a donné lieu à une enzyme chimérique complètement mature et active. Suggérant un processus d'évolution du prodomaine vers un arrangement et des mesures d'activation plus complexe. Globalement, ces donnees supplémentaires augment les connaissances fondamentales cruciales pour le développement de nouveaux inhibiteurs de SKI-1/ SIP, tout en offrant de nouvelles variantes SKI-1 / SIP dans le but d'obtenir la structure cristallographique de l'enzyme.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Lorsque de l'essence est employée pour allumer et/ou propager un incendie, l'inférence de la source de l'essence peut permettre d'établir un lien entre le sinistre et une source potentielle. Cette inférence de la source constitue une alternative intéressante pour fournir des éléments de preuve dans ce type d'événements où les preuves matérielles laissées par l'auteur sont rares. Le but principal de cette recherche était le développement d'une méthode d'analyse de spécimens d'essence par GC-IRMS, méthode pas routinière et peu étudiée en science forensique, puis l'évaluation de son potentiel à inférer la source de traces d'essence en comparaison aux performances de la GC-MS. Un appareillage permettant d'analyser simultanément les échantillons par MS et par IRMS a été utilisé dans cette recherche. Une méthode d'analyse a été développée, optimisée et validée pour cet appareillage. Par la suite, des prélèvements d'essence provenant d'un échantillonnage conséquent et représentatif du marché de la région lausannoise ont été analysés. Finalement, les données obtenues ont été traitées et interprétées à l'aide de méthodes chimiométriques. Les analyses effectuées ont permis de montrer que la méthodologie mise en place, aussi bien pour la composante MS que pour l'IRMS, permet de différencier des échantillons d'essence non altérée provenant de différentes stations-service. Il a également pu être démontré qu'à chaque nouveau remplissage des cuves d'une station-service, la composition de l'essence distribuée par cette station est quasi unique. La GC-MS permet une meilleure différenciation d'échantillons prélevés dans différentes stations, alors que la GC-IRMS est plus performante lorsqu'il s'agit de comparer des échantillons collectés après chacun des remplissages d'une cuve. Ainsi, ces résultats indiquent que les deux composantes de la méthode peuvent être complémentaires pour l'analyse d'échantillons d'essence non altérée. Les résultats obtenus ont également permis de montrer que l'évaporation des échantillons d'essence ne compromet pas la possibilité de grouper des échantillons de même source par GC-MS. Il est toutefois nécessaire d'effectuer une sélection des variables afin d'éliminer celles qui sont influencées par le phénomène d'évaporation. Par contre, les analyses effectuées ont montré que l'évaporation des échantillons d'essence a une forte influence sur la composition isotopique des échantillons. Cette influence est telle qu'il n'est pas possible, même en effectuant une sélection des variables, de grouper correctement des échantillons évaporés par GC-IRMS. Par conséquent, seule la composante MS de la méthodologie mise en place permet d'inférer la source d'échantillons d'essence évaporée. _________________________________________________________________________________________________ When gasoline is used to start and / or propagate an arson, source inference of gasoline can allow to establish a link between the fire and a potential source. This source inference is an interesting alternative to provide evidence in this type of events where physical evidence left by the author are rare. The main purpose of this research was to develop a GC-IRMS method for the analysis of gasoline samples, a non-routine method and little investigated in forensic science, and to evaluate its potential to infer the source of gasoline traces compared to the GC-MS performances. An instrument allowing to analyze simultaneously samples by MS and IRMS was used in this research. An analytical method was developed, optimized and validated for this instrument. Thereafter, gasoline samples from a large sampling and representative of the Lausanne area market were analyzed. Finally, the obtained data were processed and interpreted using chemometric methods. The analyses have shown that the methodology, both for MS and for IRMS, allow to differentiate unweathered gasoline samples from different service stations. It has also been demonstrated that each new filling of the tanks of a station generates an almost unique composition of gasoline. GC-MS achieves a better differentiation of samples coming from different stations, while GC-IRMS is more efficient to distinguish samples collected after each filling of a tank. Thus, these results indicate that the two components of the method can be complementary to the analysis of unweathered gasoline samples. The results have also shown that the evaporation of gasoline samples does not compromise the possibility to group samples coming from the same source by GC-MS. It is however necessary to make a selection of variables in order to eliminate those which are influenced by the evaporation. On the other hand, the carried out analyses have shown that the evaporation of gasoline samples has such a strong influence on the isotopic composition of the samples that it is not possible, even by performing a selection of variables, to properly group evaporated samples by GC-IRMS. Therefore, only the MS allows to infer the source of evaporated gasoline samples.