INTERMED predicts non-return to work in an occupational rehabilitation setting for individuals with orthopaedic trauma-part 2

Introduction.- The model presented in part I (19 predictors) had good predictive values for non-return to work 2 years after vocational rehabilitation for orthopaedic trauma. However, the number of predictors is high for the detection of patients at risk in a clinic. For example, the INTERMED for itself consists of 20 questions and needs 20 minutes to be filled in. For this reason, the aim of this study was to compare the predictive value of different models for the prediction of non-return to work.Patients and methods.- In this longitudinal prospective study, the cohort consisted of 2156 included inpatients with orthopaedic trauma attending a rehabilitation hospital after a work, traffic, sport or leisure related injury. Two years after discharge, 1502 patients returned a questionnaire regarding return to work. We compared the area under the receiver-operator-characteristics curve (ROC) between different models: INTERMED total score, the 4 partial INTERMED scores, the items of the most predictive partial score; with or without confounders.Results.- The ROC for the total score of the INTERMED plus the five confounders of the of the part one (qualified work, speaking French, lesion of upper extremity, education and age) was 0.72. The sole partial INTERMED score to predict return to work was the social sub score. The ROC for the five items of the latter sub score of the INTERMED was 0.69. The ROC for the five items of the social subscale of the INTERMED combined with five predictors was 0.73. This was significantly better than the use of only the five items from INTERMED alone (delta 0.034; 95% CI 0.017 to .050). The model presented in part I (INTERMED total score plus 18 predictors) was not significantly better than the five items INTERMED social score plus five confounders.Discussion.- The use of a model with ten variables (INTERMED social five items plus five confounders) has good predictive value to detect patients not returning to work after vocational rehabilitation after orthopaedic trauma. The parsimony of this model facilitates its use in a clinic for the detection of patients at risk.

Optimization of HS-SPME/GC-MS analysis and its use in the profiling of illicit ecstasy tablets (Part 1)

A headspace solid-phase microextraction procedure (HS-SPME) was developed for the profiling of traces present in 3,4-methylenedioxymethylampethamine (MDMA). Traces were first extracted using HS-SPME and then analyzed by gas chromatography-mass spectroscopy (GC-MS). The HS-SPME conditions were optimized using varying conditions. Optimal results were obtained when 40 mg of crushed MDMA sample was heated at 80 °C for 15 min, followed by extraction at 80 °C for 15 min with a polydimethylsiloxane/divinylbenzene coated fibre. A total of 31 compounds were identified as traces related to MDMA synthesis, namely precursors, intermediates or by-products. In addition some fatty acids used as tabletting materials and caffeine used as adulterant, were also detected. The use of a restricted set of 10 target compounds was also proposed for developing a screening tool for clustering samples having close profile. 114 seizures were analyzed using an SPME auto-sampler (MultiPurpose Samples MPS2), purchased from Gerstel GMBH & Co. (Germany), and coupled to GC-MS. The data was handled using various pre-treatment methods, followed by the study of similarities between sample pairs based on the Pearson correlation. The results show that HS-SPME, coupled with the suitable statistical method is a powerful tool for distinguishing specimens coming from the same seizure and specimens coming from different seizures. This information can be used by law enforcement personnel to visualize the ecstasy distribution network as well as the clandestine tablet manufacturing.

Interactions between respiration and systemic hemodynamics. Part I: basic concepts.

The topic of cardiorespiratory interactions is of extreme importance to the practicing intensivist. It also has a reputation for being intellectually challenging, due in part to the enormous volume of relevant, at times contradictory literature. Another source of difficulty is the need to simultaneously consider the interrelated functioning of several organ systems (not necessarily limited to the heart and lung), in other words, to adopt a systemic (as opposed to analytic) point of view. We believe that the proper understanding of a few simple physiological concepts is of great help in organizing knowledge in this field. The first part of this review will be devoted to demonstrating this point. The second part, to be published in a coming issue of Intensive Care Medicine, will apply these concepts to clinical situations. We hope that this text will be of some use, especially to intensivists in training, to demystify a field that many find intimidating.

The QUASAR reproducibility study, Part II: Results from a multi-center Arterial Spin Labeling test-retest study.

Arterial Spin Labeling (ASL) is a method to measure perfusion using magnetically labeled blood water as an endogenous tracer. Being fully non-invasive, this technique is attractive for longitudinal studies of cerebral blood flow in healthy and diseased individuals, or as a surrogate marker of metabolism. So far, ASL has been restricted mostly to specialist centers due to a generally low SNR of the method and potential issues with user-dependent analysis needed to obtain quantitative measurement of cerebral blood flow (CBF). Here, we evaluated a particular implementation of ASL (called Quantitative STAR labeling of Arterial Regions or QUASAR), a method providing user independent quantification of CBF in a large test-retest study across sites from around the world, dubbed "The QUASAR reproducibility study". Altogether, 28 sites located in Asia, Europe and North America participated and a total of 284 healthy volunteers were scanned. Minimal operator dependence was assured by using an automatic planning tool and its accuracy and potential usefulness in multi-center trials was evaluated as well. Accurate repositioning between sessions was achieved with the automatic planning tool showing mean displacements of 1.87+/-0.95 mm and rotations of 1.56+/-0.66 degrees . Mean gray matter CBF was 47.4+/-7.5 [ml/100 g/min] with a between-subject standard variation SD(b)=5.5 [ml/100 g/min] and a within-subject standard deviation SD(w)=4.7 [ml/100 g/min]. The corresponding repeatability was 13.0 [ml/100 g/min] and was found to be within the range of previous studies.

La part du national. Comparer des politiques infranationales dans un environnement multi-niveaux

Si des enjeux, des configurations d'acteurs, ou la définition de certains problems peuvent être propres au niveau local, ceux-ci sont fréquemment influencés par des paramètres définis à d'autres niveaux de gouvernement. En particulier, il est nécessaire que les dispositifs de recherche centrés sur la comparaison de politiques infranationales abordent directement la question de l'intégration et de l'impact du cadre national. Comment faire la part du national dans les comparaisons de politiques infranationales ? À partir d'un ensemble de travaux de sociologie de l'action publique, cet article montre que dominent deux manières d'articuler national et infranational. Certains travaux privilégient le niveau national, et prennent en compte ce qui se joue à d'autres niveaux pour observer des déclinaisons ou des réappropriations de politiques mises en place au niveau national. D'autres travaux, en particulier la littérature centrée sur la gouvernance territoriale ou urbaine, accordent un primat au local tout en prenant acte de la multiplication des niveaux de gouvernement. Enfin, l'accent est placé sur les tentatives visant à concilier ces perspectives. À l'appui de nos propres travaux, nous montrons comment des approches centrées sur les acteurs permettent d'ouvrir des pistes stimulantes pour articuler plusieurs niveaux d'analyse.

New perspectives in the use of ink evidence in forensic science: Part III: Operational applications and evaluation.

The research reported in this series of article aimed at (1) automating the search of questioned ink specimens in ink reference collections and (2) at evaluating the strength of ink evidence in a transparent and balanced manner. These aims require that ink samples are analysed in an accurate and reproducible way and that they are compared in an objective and automated way. This latter requirement is due to the large number of comparisons that are necessary in both scenarios. A research programme was designed to (a) develop a standard methodology for analysing ink samples in a reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in forensic contexts. This report focuses on the last of the three stages of the research programme. The calibration and acquisition process and the mathematical comparison algorithms were described in previous papers [C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part I: Development of a quality assurance process for forensic ink analysis by HPTLC, Forensic Sci. Int. 185 (2009) 29-37; C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part II: Development and testing of mathematical algorithms for the automatic comparison of ink samples analysed by HPTLC, Forensic Sci. Int. 185 (2009) 38-50]. In this paper, the benefits and challenges of the proposed concepts are tested in two forensic contexts: (1) ink identification and (2) ink evidential value assessment. The results show that different algorithms are better suited for different tasks. This research shows that it is possible to build digital ink libraries using the most commonly used ink analytical technique, i.e. high-performance thin layer chromatography, despite its reputation of lacking reproducibility. More importantly, it is possible to assign evidential value to ink evidence in a transparent way using a probabilistic model. It is therefore possible to move away from the traditional subjective approach, which is entirely based on experts' opinion, and which is usually not very informative. While there is room for the improvement, this report demonstrates the significant gains obtained over the traditional subjective approach for the search of ink specimens in ink databases, and the interpretation of their evidential value.

Silver-base metal epithermal vein and listwaenite types of deposit Crnac, Rogozna Mts., Kosovo. Part I: Ore mineral geochemistry and sulfur isotope study

Pb-Zn-Ag vein and listwaenite types of mineralization in Crnac deposit, Western Vardar zone, were deposited within several stages: (i) the pre-ore stage comprises pyrite, arsenopyrite, pyrrhotite, quartz, kaolinite and is followed by magnetite-pyrite; (ii) the syn-ore stage is composed of galena, sphalerite, tetrahedrite and stefanite; and (iii) the post-ore stage is composed of carbonates, pyrite, arsenopyrite and minor galena. The vein type mineralization is hosted by Jurassic amphibolites and veins terminate within overlying serpentinites. Mineralized listwaenites are developed along the serpentinite-amphibolite interface. The reserves are estimated to 1.7 Mt of ore containing in average 7.6% lead, 2.9% zinc, and 102 g/t silver. Sulfides from the pre- and syn-mineralization assemblage of the vein- and listwaenite-types of mineralization from the Crnac Pb-Zn-Ag deposit have been analyzed using microprobe, crush-leachates and sulfur isotopes. The pre-ore assemblage precipitated under high sulfur fugacities (f(S(2)) = 10(-8)-10(-6) bar) from temperatures ranging between 350 degrees C and 380 degrees C. Most likely water-rock reactions, boiling and/or increase of pH caused an increase of delta(34)S of pyrite toward upper levels within the deposit. The decomposition of pre-ore pyrrhotite to a pyrite-magnetite mixture occurred at a fugacity of sulfur from f(S(2)) = 8.7 x 10(-10) to 9.6 x 10(-9) bar and fugacity of oxygen from f(O(2)) = 2.4 x 10(-30) to 3.1 x 10(-28) bars, indicating a contribution of an oxidizing fluid, i.e. meteoric water during pre-ore stages of hydrothermal activity. The crystallization temperatures obtained by the sphalerite-galena isotope geothermometer range from 230 to 310 degrees C. The delta(34)S values of pre- and syn-ore sulfides (pyrite, galena, sphalerite, delta(34)S = 0.3-5.9 parts per thousand) point to magmatic sulfur. Values of delta(34)S of galena and sphalerite are decreasing upwards due to precipitation of early formed sulfide minerals. Post-ore assemblage precipitated at temperature below 190 degrees C. Based on data presented above, we assume two fluid sources: (i) a magmatic source, supported by sulfur isotopic compositions within pre- and syn-ore minerals and a high mol% of fluorine found within pre- and syn-ore leachates, and (ii) a meteoric source, deduced by coincident pyrite-magnetite intergrowth, sulfur isotopic trends within syn-ore minerals and decrease of crystallization temperatures from the pre-ore stage (380-350 degrees C), towards the syn-ore (310-215 degrees C) and post-ore stages (<190 degrees C). Post-ore fluids are Na-Ca-Mg-K-Li chlorine rich and were modified via water-rock reactions. Simple mineral assemblage and sphalerite composition range from 1.5 to 10.1 mol% of FeS catalog Crnac to a group of intermediate sulfidation epithermal deposit. (C) 2011 Elsevier B.V. All rights reserved.

Anorectal anomalies associated with or as part of other anomalies.

Anorectal anomalies occurring with other anomalies or as part of syndromes were analyzed to determine how their epidemiological characteristics differed from those of isolated anal anomalies. Almost 15% of cases were chromosomal, monogenic or teratogenic syndromes, whereas the rest were of unknown cause including sequences (9.3%), VACTERL associations (15.4%) and multiple congenital anomalies (MCA) (60.2%). Almost half of babies with MCA had one or two VACTERL anomalies with distribution frequencies that did not differ significantly from those in babies with the full VACTERL association. There were considerable differences in the frequency of the VACTERL association among babies with different types of anorectal anomaly. Babies with anal anomalies occurring with sequences, VACTERL or MCA showed the same sex differences as babies with isolated anal anomalies, namely male predominance in anal atresia without fistula or cloaca, no sex difference in anal atresia with fistula, and female predominance in ectopic anus and congenital anal fistula. These anomalies, however, were associated with significantly lower mean gestational lengths and birth weights, and higher frequencies of fetal death and pregnancy termination than babies with isolated anal anomalies. Twins were more frequent in sequences, VACTERL and MCA than in isolated anomalies, monogenic syndromes or chromosome anomalies. Five cases were conjoined twins, representing 15% of all cases of twin pregnancies with an anal anomaly. Indeterminate sex was more frequent in babies with anal atresias without fistula than in those with fistula. Anal anomalies are defects of blastogenesis attributable to disorders in expression of pattern determining genes. The differential sex involvement in different types of anal anomaly may be manifestations of expression of the HY/SRY genes during blastogenesis or of X-linkage.

Postmortem chemistry update part II.

As a continuation of "Postmortem Chemistry Update Part I," Part II deals with molecules linked to liver and cardiac functions, alcohol intake and alcohol misuse, myocardial ischemia, inflammation, sepsis, anaphylaxis, and hormonal disturbances. A very important array of new material concerning these situations had appeared in the forensic literature over the last two decades. Some molecules, such as procalcitonin and C-reactive protein, are currently researched in cases of suspected sepsis and inflammation, whereas many other analytes are not integrated into routine casework. As in part I, a literature review concerning a large panel of molecules of forensic interest is presented, as well as the results of our own observations, where possible.

Image quality assessment in digital mammography: part II. NPWE as a validated alternative for contrast detail analysis.

Assessment of image quality for digital x-ray mammography systems used in European screening programs relies mainly on contrast-detail CDMAM phantom scoring and requires the acquisition and analysis of many images in order to reduce variability in threshold detectability. Part II of this study proposes an alternative method based on the detectability index (d') calculated for a non-prewhitened model observer with an eye filter (NPWE). The detectability index was calculated from the normalized noise power spectrum and image contrast, both measured from an image of a 5 cm poly(methyl methacrylate) phantom containing a 0.2 mm thick aluminium square, and the pre-sampling modulation transfer function. This was performed as a function of air kerma at the detector for 11 different digital mammography systems. These calculated d' values were compared against threshold gold thickness (T) results measured with the CDMAM test object and against derived theoretical relationships. A simple relationship was found between T and d', as a function of detector air kerma; a linear relationship was found between d' and contrast-to-noise ratio. The values of threshold thickness used to specify acceptable performance in the European Guidelines for 0.10 and 0.25 mm diameter discs were equivalent to threshold calculated detectability indices of 1.05 and 6.30, respectively. The NPWE method is a validated alternative to CDMAM scoring for use in the image quality specification, quality control and optimization of digital x-ray systems for screening mammography.