Cointegrase, a naturally occurring, truncated form of IS21 transposase, catalyzes replicon fusion rather than simple insertion of IS21.

The bacterial insertion sequence IS21 contains two genes, istA and istB, which are organized as an operon. IS21 spontaneously forms tandem repeats designated (IS21)2. Plasmids carrying (IS21)2 react efficiently with other replicons, producing cointegrates via a cut-and-paste mechanism. Here we show that transposition of a single IS21 element (simple insertion) and cointegrate formation involving (IS21)2 result from two distinct non-replicative pathways, which are essentially due to two differentiated IstA proteins, transposase and cointegrase. In Escherichia coli, transposase was characterized as the full-length, 46 kDa product of the istA gene, whereas the 45 kDa cointegrase was expressed, in-frame, from a natural internal translation start of istA. The istB gene, which could be experimentally disconnected from istA, provided a helper protein that strongly stimulated the transposase and cointegrase-driven reactions. Site-directed mutagenesis was used to express either cointegrase or transposase from the istA gene. Cointegrase promoted replicon fusion at high frequencies by acting on IS21 ends which were linked by 2, 3, or 4 bp junction sequences in (IS21)2. By contrast, cointegrase poorly catalyzed simple insertion of IS21 elements. Transposase had intermediate, uniform activity in both pathways. The ability of transposase to synapse two widely spaced IS21 ends may reside in the eight N-terminal amino acid residues which are absent from cointegrase. Given the 2 or 3 bp spacing in naturally occurring IS21 tandems and the specialization of cointegrase, the fulminant spread of IS21 via cointegration can now be understood.

Trace element supplementation modulates pulmonary infection rates after major burns: a double-blind, placebo-controlled trial.

Infections remain the leading cause of death after major burns. Trace elements are involved in immunity and burn patients suffer acute trace element depletion after injury. In a previous nonrandomized study, trace element supplementation was associated with increased leukocyte counts and shortened hospital stays. This randomized, placebo-controlled trial studied clinical and immune effects of trace element supplements. Twenty patients, aged 40 +/- 16 y (mean +/- SD), burned on 48 +/- 17% of their body surfaces, were studied for 30 d after injury. They consumed either standard trace element intakes plus supplements (40.4 micromol Cu, 2.9 micromol Se, and 406 micromol Zn; group TE) or standard trace element intakes plus placebo (20 micromol Cu, 0.4 micromol Se, and 100 micromol Zn; group C) for 8 d. Demographic data were similar for both groups. Mean plasma copper and zinc concentrations were below normal until days 20 and 15, respectively (NS). Plasma selenium remained normal for group TE but decreased for group C (P < 0.05 on days 1 and 5). Total leukocyte counts tended to be higher in group TE because of higher neutrophil counts. Proliferation to mitogens was depressed compared with healthy control subjects (NS). The number of infections per patient was significantly (P < 0.05) lower in group TE (1.9 +/- 0.9) than in group C (3.1 +/- 1.1) because of fewer pulmonary infections. Early trace element supplementation appears beneficial after major burns; it was associated with a significant decrease in the number of bronchopneumonia infections and with a shorter hospital stay when data were normalized for burn size.

How can a dual oriT system contribute to efficient transfer of an integrative and conjugative element?

Integrative and conjugative elements (ICEs) are particularly interesting model systems for horizontal gene transfer, because they normally reside in an integrated state in the host chromosome but can excise and self-transfer under particular conditions, typically requiring exquisite regulatory cascades. Despite important advances in our understanding of the transfer mechanisms of a number of ICE, many essential details are lacking. Recently we reported that ICEclc, a 103 kb ICE of Pseudomonas knackmussii B13, has two active origins of transfer (oriTs), which is very much unlike conjugative plasmids that usually employ a single oriT. We discuss here how this dual oriT system could function and how it actually could have presented an evolutionary advantage for ICEclc distribution.

Immuno-electron microscopic identification of human estrogen receptor-DNA complexes at the estrogen-responsive element and in the first intron of a Xenopus vitellogenin gene.

Using an extract of nuclei from the estrogen-responsive human breast cancer cell line MCF-7, protein-DNA complexes were assembled in vitro at the 5' end of the Xenopus laevis vitellogenin gene B2 that is normally expressed in liver after estrogen induction. The complexes formed were analyzed by electron microscopy after labeling by the indirect colloidal gold immunological method using a monoclonal antibody specific for the human estrogen receptor. As identified by its interaction with protein A-gold, the antibody was found linked to two protein-DNA complexes, the first localized at the estrogen responsive element of the gene and the second in intron I, thus proving a direct participation of the receptor in these two complexes. The procedure used allows the visualization and rapid localization of specific transcription factors bound in vitro to a promoter or any other gene region.

The estrogen-responsive element as an inducible enhancer: DNA sequence requirements and conversion to a glucocorticoid-responsive element.

The estrogen-responsive element (ERE) present in the 5'-flanking region of the Xenopus laevis vitellogenin (vit) gene B1 has been characterized by transient expression analysis of chimeric vit-tk-CAT (chloramphenicol acetyltransferase) gene constructs transfected into the human estrogen-responsive MCF-7 cell line. The vit B1 ERE behaves like an inducible enhancer, since it is able to confer estrogen inducibility to the heterologous HSV thymidine kinase (tk) promoter in a relative position- and orientation-independent manner. In this assay, the minimal B1 ERE is 33 bp long and consists of two 13 bp imperfect palindromic elements both of which are required for the enhancer activity. A third imperfect palindromic element is present further upstream within the 5'-flanking region of the gene but is unable to confer hormone responsiveness by itself. Similarly, neither element forming the B1 ERE can alone confer estrogen inducibility to the tk promoter. However, in combinations of two, all three imperfect palindromes can act cooperatively to form a functional ERE. In contrast a single 13 bp perfect palindromic element, GGTCACTGTGACC, such as the one found upstream of the vit gene A2, is itself sufficient to act as a fully active ERE. Single point mutations within this element abolish estrogen inducibility, while a defined combination of two mutations converts this ERE into a glucocorticoid-responsive element.

Importance of polyethylene thickness in total shoulder arthroplasty: a finite element analysis.

BACKGROUND: Articular surfaces reconstruction is essential in total shoulder arthroplasty. Because of the limited glenoid bone support, thin glenoid component could improve anatomical reconstruction, but adverse mechanical effects might appear. METHODS: With a numerical musculoskeletal shoulder model, we analysed and compared three values of thickness of a typical all-polyethylene glenoid component: 2, 4 (reference) and 6mm. A loaded movement of abduction in the scapular plane was simulated. We evaluated the humeral head translation, the muscle moment arms, the joint force, the articular contact pattern, and the polyethylene and cement stress. Findings Decreasing polyethylene thickness from 6 to 2mm slightly increased humeral head translation and muscle moment arms. This induced a small decreased of the joint reaction force, but important increase of stress within the polyethylene and the cement mantel. Interpretation The reference thickness of 4mm seems a good compromise to avoid stress concentration and joint stuffing.

Inter- and intraobserver variability of measurements with Pentacam HR® in patients with mild to moderate keratoconus

Purpose: To evaluate inter- and intraobserver variability of indices crucial for detection of keratoconus progression derived from the Pentacam HR® (high-resolution) tomographer (OCULUS Optikgeräte GmbH, Wetzlar, Germany) in patients with mild to moderate keratoconus. Methods: Three repeated corneal topography measurements in the 25-picture mode by two independent observers were performed. The extent of variability across a large range of measurement parameters was analyzed including anterior and posterior corneal surface measurements, pachymetry values, corneal volume, anterior chamber volume and depth, and iridocorneal angle. The intraclass correlation coefficient (ICC) between and within each investigator was calculated to assess reproducibility and repeatability, respectively. Results: 31 eyes of 20 patients (mean age 31.6, SD ± 8.6) were included. Overall, the repeatability and reproducibility were excellent. The range of variability was reported by calculating the standard deviation of measurements. The detailed results are shown in Table 1. Conclusions: This study shows that the Pentacam HR® tomographer provides reliable measurements in patients with mild to moderate keratoconus. However, all parameters showed a certain range of variability. This should be taken into account when assessing keratoconus progression in order to distinguish true progression from variability in measurements. In addition, the excellent reproducibility suggests that the measurements can be reliably performed by different individuals from one visit to another.

Profilage de la cocaïne : approche inter laboratoires

Introduction Actuellement, les projets européens concernant l'harmonisation des méthodes de profilage se concentrent principalement sur les drogues de type synthétique telles que les ecstasy et les dérivés de la phényléthylamine [Aalberg L. et al. 2005, Aalberg L. et al. 2005, SMT Project 2001, CHAMP Project 2003]. Néanmoins, d'après le rapport annuel 2005 de l'Agence Européenne des Drogues (EMCDDA), la cocaïne est devenue un élément majeur du paysage européen des stupéfiants. De même, les dernières statistiques de l'Office Fédéral de la Police Suisse montrent que les saisies de cocaïne ont quasiment doublé entre 2003 et 2004 pour atteindre des quantités jamais vues auparavant. Le 7ème programme cadre européen, pour la recherche et le développement technologique, propose d'ailleurs un sujet concernant «la détermination et le pistage des composés utilisés lors de la production de certaines substances ». La cocaïne est donc devenue un thème prioritaire en Europe et l'utilisation des méthodes de profilage est un moyen puissant pour établir des liens entre des saisies. Les méthodes de profilage de la cocaïne sont utilisées par quelques laboratoires mais il y a peu ou quasiment pas d'échange d'informations aussi bien concernant les données obtenues que les méthodes utilisées afin d'améliorer la lutte contre le trafic de stupéfiants. Aucune recherche relative à l'harmonisation des méthodes entre deux laboratoires n'a été réalisée à ce jour. Le projet Interreg IIIA avait pour objectif de fournir du renseignement forensique en matière de stupéfiants, plus précisément dans ce cas à la frontière franco-suisse. Le processus de profilage repose sur deux phases interconnectées. La première est consacrée au développement de la méthode analytique permettant l'extraction d'une signature chimique (alcaloïdes et autres composés d'origine, solvants, produits de coupage) ou physique (conditionnement) du produit illicite. La seconde se focalise sur l'intégration des résultats dans un but d'utilisation par les forces de police. Cette recherche s'est tout d'abord focalisée sur le profilage des alcaloïdes en optimisant et en validant la méthode analytique élaborée à l'IPS sur un même GC-FID [Guéniat O. 2004 et Esseiva P. 2004]. Ensuite, la méthode a été étendue à une comparaison de spécimens analysés sur deux appareils différents. Finalement, afin de tester les résultats obtenus par l'analyse des alcaloïdes, une méthode indépendante, la Statique Headspace couplée à un GC-FID, a été, utilisée pour le profilage des solvants. En effet, de nombreux solvants sont utilisés lors de la production de la cocaïne et il doit donc aussi, a priori, être possible d'établir des liens sur la base de cette analyse. Les informations fournies par ces deux méthodes ainsi que leur complémentarité ont été investiguées.

Assessing inter-rater reliability when the raters are fixed: two concepts and two estimates.

Intraclass correlation (ICC) is an established tool to assess inter-rater reliability. In a seminal paper published in 1979, Shrout and Fleiss considered three statistical models for inter-rater reliability data with a balanced design. In their first two models, an infinite population of raters was considered, whereas in their third model, the raters in the sample were considered to be the whole population of raters. In the present paper, we show that the two distinct estimates of ICC developed for the first two models can both be applied to the third model and we discuss their different interpretations in this context.