La pratique basée sur les résultats probants. Partie 1: Origine, définitions, critiques, obstacles, avantages et impact [Evidence-based practice. Part 1: Origins, definitions, critiques, obstacles, advantages and impact].

The increasing popularity of evidence-based practice (EBP) requires that nurses take a stand regarding this type of practice. This positioning rests on knowledge of EBP, however this notion varies by discipline and many definitions exist even within the nursing discipline. An improved understanding of the basic tenets of this type of practice is thus essential. This first, of a series of two articles describes the origin of EBP as well as various definitions, it also presents the major criticisms raised and takes a look at the impact of the increased tendency towards EBP on professional practice.

Recommendations to reduce extremity and eye lens doses in interventional radiology and cardiology

The main aim of the Work Package 1 (WP1) of the ORAMED project, Collaborative Project (2008-2011), supported by the European Commission within its 7th Framework Programme, was to obtain a set of standardized data on extremity and eye lens doses for staff in interventional radiology and cardiology (IR/IC) workplaces and to recommend a series of guidelines on radiation protection in order to both guarantee and optimize staff protection. Within the project, coordinated measurements were performed in 34 hospitals in 6 European countries. Furthermore, simulations of the most representative workplaces in IR and IC were performed to determine the main parameters that influence the extremity and eye lens doses. The work presented in this paper shows the recommendations that were formulated by the results obtained from both measurements and simulations. The presented guidelines are directed to operators, assistant personnel, radiation protection officers and medical physics experts. They concern radiation protection issues, such as the use of room protective equipment, as well as the positioning of the extremity and eye lens dosemeters for routine monitoring.

The sheeping technique or how to avoid exchange maneuvers.

INTRODUCTION: The arteries of bifurcation aneurysms are sometimes so angulated or tortuous that an exchange maneuver is necessary to catheterize them with a balloon or stent delivery catheter. Because of the risk of distal wire perforation associated with exchange maneuvers, we sought to find an alternative technique. METHODS: Our experience shows that a microcatheter tends to preferentially follow a previously placed microcatheter, even if the initial catheterization might be challenging. Accessing an artery with two microcatheters simultaneously may thus be an alternative to an exchange maneuver. Because of this tendency for catheters to behave like sheep following one another, we named this method the sheeping technique (ST). The ST consists of (a) first placing a 1.7 French microcatheter into the division branch requiring balloon or stent protection to straighten the course of the arteries in order to facilitate and (b) positioning in the same artery of a larger and stiffer balloon or stent microcatheter. Once the second balloon or stent microcatheter is in place, the first microcatheter can be pulled back and used to coil the aneurysm. RESULTS: Between January 2009 and December 2012, The ST was successfully used in 208/246 procedures (85 %). Conversion to an exchange maneuver was necessary in 38/246 (15 %). There were no arterial perforations or ischemic events related to the handling of both microcatheters. CONCLUSION: The sheeping technique may improve safety by replacing the need for an exchange maneuver during difficult balloon- or stent-assisted coiling.

Monte Carlo simulation of a whole-body counter using IGOR phantoms.

Whole-body counting is a technique of choice for assessing the intake of gamma-emitting radionuclides. An appropriate calibration is necessary, which is done either by experimental measurement or by Monte Carlo (MC) calculation. The aim of this work was to validate a MC model for calibrating whole-body counters (WBCs) by comparing the results of computations with measurements performed on an anthropomorphic phantom and to investigate the effect of a change in phantom's position on the WBC counting sensitivity. GEANT MC code was used for the calculations, and an IGOR phantom loaded with several types of radionuclides was used for the experimental measurements. The results show a reasonable agreement between measurements and MC computation. A 1-cm error in phantom positioning changes the activity estimation by >2%. Considering that a 5-cm deviation of the positioning of the phantom may occur in a realistic counting scenario, this implies that the uncertainty of the activity measured by a WBC is ∼10-20%.

Imaging for trans-catheter pulmonary stent-valve implantation without angiography: role of intravascular ultrasound.

Patients with stenosed biologic pulmonary conduits require redo cardiac surgery to prevent severe right ventricular dysfunction. Following the latest trends, the trans-catheter pulmonary stent-valve implantation represents a new fascinating alternative carrying a lower operative risk, compared with the standard open-heart re-intervention. Traditionally, the pulmonary stent valve is positioned off pump, under fluoroscopic control, and requires angiographies. However, alternative tools not requiring contrast injections for the intra-operative cardiac imaging have to be also considered strongly. The usefulness of intravascular ultrasound for the positioning of aortic endoprosthesis has already been proven in previous reports and, following the same principle, we have started to routinely implant balloon-expandable stent valves (Edwards Sapien? THV) in stenosed pulmonary valve conduits using intravascular ultrasound for the stent-valve positioning without angiography. We describe the intra-operative intravascular imaging technique with technical details.

Processus de reconnaissance et d'identification de personnes décédées

Recognition and identification processes for deceased persons. Determining the identity of deceased persons is a routine task performed essentially by police departments and forensic experts. This thesis highlights the processes necessary for the proper and transparent determination of the civil identities of deceased persons. The identity of a person is defined as the establishment of a link between that person ("the source") and information pertaining to the same individual ("identifiers"). Various identity forms could emerge, depending on the nature of the identifiers. There are two distinct types of identity, namely civil identity and biological identity. The paper examines four processes: identification by witnesses (the recognition process) and comparisons of fingerprints, dental data and DNA profiles (the identification processes). During the recognition process, the memory function is examined and helps to clarify circumstances that may give rise to errors. To make the process more rigorous, a body presentation procedure is proposed to investigators. Before examining the other processes, three general concepts specific to forensic science are considered with regard to the identification of a deceased person, namely, matter divisibility (Inman and Rudin), transfer (Locard) and uniqueness (Kirk). These concepts can be applied to the task at hand, although some require a slightly broader scope of application. A cross comparison of common forensic fields and the identification of deceased persons reveals certain differences, including 1 - reverse positioning of the source (i.e. the source is not sought from traces, but rather the identifiers are obtained from the source); 2 - the need for civil identity determination in addition to the individualisation stage; and 3 - a more restricted population (closed set), rather than an open one. For fingerprints, dental and DNA data, intravariability and intervariability are examined, as well as changes in these post mortem (PM) identifiers. Ante-mortem identifiers (AM) are located and AM-PM comparisons made. For DNA, it has been shown that direct identifiers (taken from a person whose civil identity has been alleged) tend to lead to determining civil identity whereas indirect identifiers (obtained from a close relative) direct towards a determination of biological identity. For each process, a Bayesian model is presented which includes sources of uncertainty deemed to be relevant. The results of the different processes combine to structure and summarise an overall outcome and a methodology. The modelling of dental data presents a specific difficulty with respect to intravariability, which in itself is not quantifiable. The concept of "validity" is, therefore, suggested as a possible solution to the problem. Validity uses various parameters that have an acknowledged impact on teeth intravariability. In cases where identifying deceased persons proves to be extremely difficult due to the limited discrimination of certain procedures, the use of a Bayesian approach is of great value in bringing a transparent and synthetic value. RESUME : Titre: Processus de reconnaissance et d'identification de personnes décédées. L'individualisation de personnes décédées est une tâche courante partagée principalement par des services de police, des odontologues et des laboratoires de génétique. L'objectif de cette recherche est de présenter des processus pour déterminer valablement, avec une incertitude maîtrisée, les identités civiles de personnes décédées. La notion d'identité est examinée en premier lieu. L'identité d'une personne est définie comme l'établissement d'un lien entre cette personne et des informations la concernant. Les informations en question sont désignées par le terme d'identifiants. Deux formes distinctes d'identité sont retenues: l'identité civile et l'identité biologique. Quatre processus principaux sont examinés: celui du témoignage et ceux impliquant les comparaisons d'empreintes digitales, de données dentaires et de profils d'ADN. Concernant le processus de reconnaissance, le mode de fonctionnement de la mémoire est examiné, démarche qui permet de désigner les paramètres pouvant conduire à des erreurs. Dans le but d'apporter un cadre rigoureux à ce processus, une procédure de présentation d'un corps est proposée à l'intention des enquêteurs. Avant d'entreprendre l'examen des autres processus, les concepts généraux propres aux domaines forensiques sont examinés sous l'angle particulier de l'identification de personnes décédées: la divisibilité de la matière (Inman et Rudin), le transfert (Locard) et l'unicité (Kirk). Il est constaté que ces concepts peuvent être appliqués, certains nécessitant toutefois un léger élargissement de leurs principes. Une comparaison croisée entre les domaines forensiques habituels et l'identification de personnes décédées montre des différences telles qu'un positionnement inversé de la source (la source n'est plus à rechercher en partant de traces, mais ce sont des identifiants qui sont recherchés en partant de la source), la nécessité de devoir déterminer une identité civile en plus de procéder à une individualisation ou encore une population d'intérêt limitée plutôt qu'ouverte. Pour les empreintes digitales, les dents et l'ADN, l'intra puis l'inter-variabilité sont examinées, de même que leurs modifications post-mortem (PM), la localisation des identifiants ante-mortem (AM) et les comparaisons AM-PM. Pour l'ADN, il est démontré que les identifiants directs (provenant de la personne dont l'identité civile est supposée) tendent à déterminer une identité civile alors que les identifiants indirects (provenant d'un proche parent) tendent à déterminer une identité biologique. Puis une synthèse des résultats provenant des différents processus est réalisée grâce à des modélisations bayesiennes. Pour chaque processus, une modélisation est présentée, modélisation intégrant les paramètres reconnus comme pertinents. À ce stade, une difficulté apparaît: celle de quantifier l'intra-variabilité dentaire pour laquelle il n'existe pas de règle précise. La solution préconisée est celle d'intégrer un concept de validité qui intègre divers paramètres ayant un impact connu sur l'intra-variabilité. La possibilité de formuler une valeur de synthèse par l'approche bayesienne s'avère d'une aide précieuse dans des cas très difficiles pour lesquels chacun des processus est limité en termes de potentiel discriminant.

The evolutionary conserved BER1 gene is involved in microtubule stability in yeast

In yeast, microtubules are dynamic filaments necessary for spindle and nucleus positioning, as well as for proper chromosome segregation. We identify a function for the yeast gene BER1 (Benomyl REsistant 1) in microtubule stability. BER1 belongs to an evolutionary conserved gene family whose founding member Sensitivity to Red light Reduced is involved in red-light perception and circadian rhythms in Arabidopsis. Here, we present data showing that the ber1Delta mutant is affected in microtubule stability, particularly in presence of microtubule-depolymerising drugs. The pattern of synthetic lethal interactions obtained with the ber1Delta mutant suggests that Ber1 may function in N-terminal protein acetylation. Our work thus suggests that microtubule stability might be regulated through this post-translational modification on yet-to-be determined proteins

Distinct levels in Pom1 gradients limit Cdr2 activity and localization to time and position division.

Where and when cells divide are fundamental questions. In rod-shaped fission yeast cells, the DYRK-family kinase Pom1 is organized in concentration gradients from cell poles and controls cell division timing and positioning. Pom1 gradients restrict to mid-cell the SAD-like kinase Cdr2, which recruits Mid1/Anillin for medial division. Pom1 also delays mitotic commitment through Cdr2, which inhibits Wee1. Here, we describe quantitatively the distributions of cortical Pom1 and Cdr2. These reveal low profile overlap contrasting with previous whole-cell measurements and Cdr2 levels increase with cell elongation, raising the possibility that Pom1 regulates mitotic commitment by controlling Cdr2 medial levels. However, we show that distinct thresholds of Pom1 activity define the timing and positioning of division. Three conditions-a separation-of-function Pom1 allele, partial downregulation of Pom1 activity, and haploinsufficiency in diploid cells-yield cells that divide early, similar to pom1 deletion, but medially, like wild-type cells. In these cells, Cdr2 is localized correctly at mid-cell. Further, Cdr2 overexpression promotes precocious mitosis only in absence of Pom1. Thus, Pom1 inhibits Cdr2 for mitotic commitment independently of regulating its localization or cortical levels. Indeed, we show Pom1 restricts Cdr2 activity through phosphorylation of a C-terminal self-inhibitory tail. In summary, our results demonstrate that distinct levels in Pom1 gradients delineate a medial Cdr2 domain, for cell division placement, and control its activity, for mitotic commitment.

Is the function of the serratus anterior muscle disturbed following division during a standard thoracotomy?

In a prospective study the functional results after dissection or preservation of the serratus anterior muscle in the postero-lateral standard thoracotomy were evaluated. In 14 patients of our clinic with dissection and suture and in 14 patients with preservation of the serratus muscle the muscle function was assessed and compared preoperatively, within the first two post-operative weeks, and three months after the operation by the same physiotherapists. The two groups were blinded in regard to age, original disease, and mode of intervention. We compared the wing position of the scapula in the sitting position and the positioning of the scapula at fixation of the shoulder joint in the sitting and in the supine position. Using a four-grade function assessment scheme, both groups obtained the same functional results. There was no seroma in either group. After 2.8 (2.5 to 3.0) years all the surviving patients described symmetric functional conditions. We therefore conclude that in order to achieve a better view of the operative field the serratus muscle may be dissected close to the origin if it is then readapted.

Pom1 regulates the assembly of Cdr2-Mid1 cortical nodes for robust spatial control of cytokinesis.

Proper division plane positioning is essential to achieve faithful DNA segregation and to control daughter cell size, positioning, or fate within tissues. In Schizosaccharomyces pombe, division plane positioning is controlled positively by export of the division plane positioning factor Mid1/anillin from the nucleus and negatively by the Pom1/DYRK (dual-specificity tyrosine-regulated kinase) gradients emanating from cell tips. Pom1 restricts to the cell middle cortical cytokinetic ring precursor nodes organized by the SAD-like kinase Cdr2 and Mid1/anillin through an unknown mechanism. In this study, we show that Pom1 modulates Cdr2 association with membranes by phosphorylation of a basic region cooperating with the lipid-binding KA-1 domain. Pom1 also inhibits Cdr2 interaction with Mid1, reducing its clustering ability, possibly by down-regulation of Cdr2 kinase activity. We propose that the dual regulation exerted by Pom1 on Cdr2 prevents Cdr2 assembly into stable nodes in the cell tip region where Pom1 concentration is high, which ensures proper positioning of cytokinetic ring precursors at the cell geometrical center and robust and accurate division plane positioning.

Human epidermal Langerhans cells express the tight junction protein claudin-1 and are present in human genetic claudin-1 deficiency (NISCH syndrome).

Claudin-1 (CLDN1) is a structural tight junction (TJ) protein and is expressed in differentiating keratinocytes and Langerhans cells in the epidermis. Our objective was to identify immunoreactive CLDN1 in human epidermal Langerhans cells and to examine the pattern of epidermal Langerhans cells in genetic human CLDN1 deficiency [neonatal ichthyosis, sclerosing cholangitis (NISCH) syndrome]. Epidermal cells from healthy human skin labelled with CLDN1-specific antibodies were analysed by confocal laser immunofluorescence microscopy and flow cytometry. Skin biopsy sections of two patients with NISCH syndrome were stained with an antibody to CD1a expressed on epidermal Langerhans cells. Epidermal Langerhans cells and a subpopulation of keratinocytes from healthy skin were positive for CLDN1. The gross number and distribution of epidermal Langerhans cells of two patients with molecularly confirmed NISCH syndrome, however, was not grossly altered. Therefore, CLDN1 is unlikely to play a critical role in migration of Langerhans cells (or their precursors) to the epidermis or their positioning within the epidermis. Our findings do not exclude a role of this TJ molecule once Langerhans cells have left the epidermis for draining lymph nodes.

Accuracy and predictability in use of AO three-dimensionally preformed titanium mesh plates for posttraumatic orbital reconstruction: a pilot study.

The aim of this study was to prospectively evaluate the accuracy and predictability of new three-dimensionally preformed AO titanium mesh plates for posttraumatic orbital wall reconstruction.We analyzed the preoperative and postoperative clinical and radiologic data of 10 patients with isolated blow-out orbital fractures. Fracture locations were as follows: floor (N = 7; 70%), medial wall (N = 1; 1%), and floor/medial wall (N = 2; 2%). The floor fractures were exposed by a standard transconjunctival approach, whereas a combined transcaruncular transconjunctival approach was used in patients with medial wall fractures. A three-dimensional preformed AO titanium mesh plate (0.4 mm in thickness) was selected according to the size of the defect previously measured on the preoperative computed tomographic (CT) scan examination and fixed at the inferior orbital rim with 1 or 2 screws. The accuracy of plate positioning of the reconstructed orbit was assessed on the postoperative CT scan. Coronal CT scan slices were used to measure bony orbital volume using OsiriX Medical Image software. Reconstructed versus uninjured orbital volume were statistically correlated.Nine patients (90%) had a successful treatment outcome without complications. One patient (10%) developed a mechanical limitation of upward gaze with a resulting handicapping diplopia requiring hardware removal. Postoperative orbital CT scan showed an anatomic three-dimensional placement of the orbital mesh plates in all of the patients. Volume data of the reconstructed orbit fitted that of the contralateral uninjured orbit with accuracy to within 2.5 cm(3). There was no significant difference in volume between the reconstructed and uninjured orbits.This preliminary study has demonstrated that three-dimensionally preformed AO titanium mesh plates for posttraumatic orbital wall reconstruction results in (1) a high rate of success with an acceptable rate of major clinical complications (10%) and (2) an anatomic restoration of the bony orbital contour and volume that closely approximates that of the contralateral uninjured orbit.

ConnectomeViewer - Multi-Modal Multi-Level Network Visualization and Analysis.

Introduction: The field of Connectomic research is growing rapidly, resulting from methodological advances in structural neuroimaging on many spatial scales. Especially progress in Diffusion MRI data acquisition and processing made available macroscopic structural connectivity maps in vivo through Connectome Mapping Pipelines (Hagmann et al, 2008) into so-called Connectomes (Hagmann 2005, Sporns et al, 2005). They exhibit both spatial and topological information that constrain functional imaging studies and are relevant in their interpretation. The need for a special-purpose software tool for both clinical researchers and neuroscientists to support investigations of such connectome data has grown. Methods: We developed the ConnectomeViewer, a powerful, extensible software tool for visualization and analysis in connectomic research. It uses the novel defined container-like Connectome File Format, specifying networks (GraphML), surfaces (Gifti), volumes (Nifti), track data (TrackVis) and metadata. Usage of Python as programming language allows it to by cross-platform and have access to a multitude of scientific libraries. Results: Using a flexible plugin architecture, it is possible to enhance functionality for specific purposes easily. Following features are already implemented: * Ready usage of libraries, e.g. for complex network analysis (NetworkX) and data plotting (Matplotlib). More brain connectivity measures will be implemented in a future release (Rubinov et al, 2009). * 3D View of networks with node positioning based on corresponding ROI surface patch. Other layouts possible. * Picking functionality to select nodes, select edges, get more node information (ConnectomeWiki), toggle surface representations * Interactive thresholding and modality selection of edge properties using filters * Arbitrary metadata can be stored for networks, thereby allowing e.g. group-based analysis or meta-analysis. * Python Shell for scripting. Application data is exposed and can be modified or used for further post-processing. * Visualization pipelines using filters and modules can be composed with Mayavi (Ramachandran et al, 2008). * Interface to TrackVis to visualize track data. Selected nodes are converted to ROIs for fiber filtering The Connectome Mapping Pipeline (Hagmann et al, 2008) processed 20 healthy subjects into an average Connectome dataset. The Figures show the ConnectomeViewer user interface using this dataset. Connections are shown that occur in all 20 subjects. The dataset is freely available from the homepage (connectomeviewer.org). Conclusions: The ConnectomeViewer is a cross-platform, open-source software tool that provides extensive visualization and analysis capabilities for connectomic research. It has a modular architecture, integrates relevant datatypes and is completely scriptable. Visit www.connectomics.org to get involved as user or developer.

The making of frozen-hydrated, vitreous lamellas from cells for cryo-electron microscopy.

There has been a long standing desire to produce thick (up to 500 nm) cryo-sections of fully hydrated cells and tissue for high-resolution analysis in their natural state by cryo-transmission electron microscopy. Here, we present a method that can successfully produce sections (lamellas in FIB-SEM terminology) of fully hydrated, unstained cells from high-pressure frozen samples by focused ion beam (FIB) milling. The samples are therefore placed in thin copper tubes and vitrified by high-pressure freezing. For transfer, handling and subsequent milling, the tubes are placed in a novel connective device (ferrule) that protects the sample from devitrification and contamination and passes through all operation steps. A piezo driven sample positioning stage (cryo-nano-bench, CNB) with three degrees of freedom was additionally developed to enable accurate milling of frozen-hydrated lamellas. With the CNB, high-pressure frozen samples can be milled to produce either thin lamellas (<100 nm), for direct imaging by high-resolution cryo-TEM or thicker lamellas (300-500 nm) for cryo-electron tomography. The sample remains vitreous throughout the process by using the presented tools and methods. The results are an important step towards investigating larger cells and even tissue in there natural state which in the end will enable us to gain better insights into cellular processes.