The human Ia-associated invariant chain is synthesized in Ia-negative B cell variants and is not expressed on the cell surface of both Ia-negative and Ia-positive parental cells.

The expression of Ia-associated human Invariant (In) chain glycoproteins was studied in the Raji B cells as well as in their RJ 2.2.5 Ia-negative derived variant cells by using a specific rabbit anti-human In chain antiserum. Two-dimensional gel electrophoresis of immunoprecipitates from either biosynthetically labeled or surface labeled cells were analyzed. In addition, flow microfluorometric analysis of stained cells was performed. The results indicate that the In chain is constitutively produced in the Ia-negative B cell variant. Moreover, it appears that several forms of In chain-related molecules, with different charges and distinct m.w. are equally expressed in Ia-positive and Ia-negative B cells. Finally, no evidence could be obtained that the In molecular family was expressed on the cell surface of Ia-positive Raji and Ia-negative RJ 2.2.5 cells.

Biogeochemical evolution of a marine shore tailings deposit during bioremediation

Summary : Mining activities produce enormous amounts of waste material known as tailings which are composed of fine to medium size particles. These tailings often contain sulfides, which oxidation can lead to acid and metal contamination of water; therefore they need to be remediated. In this work a tailings bioremediation approach was investigated by an interdisciplinary study including geochemistry, mineralogy and microbiology. The aim of the work was to study the effect of the implementation of wetland above oxidizing tailings on the hydrogeology and the biogeochemical element cycles, and to assess the system evolution over time. To reach these goals, biogeochemical processes occurring in a marine shore tailings deposit were investigated. The studied tailings deposit is located at the Bahìa de Ite, Pacific Ocean, southern Peru, where between 1940 and 1996 the tailings were discharged from the two porphyry copper mines Cuajone and Toquepala. After the end of deposition, a remediation approach was initiated in 1997 with a wetland implementation above the oxidizing tailings. Around 90% of the tailings deposits (total 16 km2) were thus remediated, except the central delta area and some areas close to the shoreline. The multi-stable isotope study showed that the tailings were saturated with fresh water in spite of the marine setting, due to the high hydraulic gradient resulting from the wetland implementation. Submarine groundwater discharge (SGD) was the major source of SO4 2-, C1-, Na+, Fe2+, and Mn2+ input into the tailings at the original shelf-seawater interface. The geochemical study (aquatic geochemistry and X-Ray diffraction (XRD) and sequential extractions from the solid fraction) showed that iron and sulfur oxidation were the main processes in the non-remediated tailings, which showed a top a low-pH oxidation zone with strong accumulation of efflorescent salts at the surface due to capillary upward transport of heavy metals (Fe, Cu, Zn, Mn, Cd, Co, and Ni) in the arid climate. The study showed also that the implementation of the wetland resulted in very low concentrations of heavy metals in solution (mainly under the detection limit) due to the near neutral pH and more reducing conditions (100-150 mV). The heavy metals, which were taken from solution, precipitated as hydroxides and sulfides or were bound to organic matter. The bacterial community composition analysis by Terminal Restriction Fragment Length Polymorphism (T-RFLP) and cloning and sequencing of 16S rRNA genes combined with a detailed statistical analysis revealed a high correlation between the bacterial distribution and the geochemical variables. Acidophilic autotrophic oxidizing bacteria were dominating the oxidizing tailings, whereas neutrophilic and heterotrophic reducing bacteria were driving the biogeochemical processes in the remediated tailings below the wetland. At the subsurface of the remediated tailings, an iron cycling was highlighted with oxidation and reduction processes due to micro-aerophilic niches provided by the plant rhizosphere in this overall reducing environment. The in situ bioremediation experiment showed that the main parameter to take into account for the effectiveness was the water table and chemistry which controls the system. The constructed remediation cells were more efficient and rapid in metal removal when saturation conditions were available. This study showed that the bioremediation by wetland implementation could be an effective and rapid treatment for some sulfidic mine tailings deposits. However, the water saturation of the tailings has to be managed on a long-term basis in order to guarantee stability. Résumé : L'activité minière produit d'énormes quantités de déchets géologiques connus sous le nom de « tailings » composées de particules de taille fine à moyenne. Ces déchets contiennent souvent des sulfures dont l'oxydation conduit à la formation d'effluents acides contaminés en métaux, d'où la nécessité d'effectuer une remédiation des sites de stockage concernés. Le but de ce travail est dans un premier temps d'étudier l'effet de la bio-remédiation d'un dépôt de tailings oxydés sur l'hydrogéologie du système et les cycles biogéochimiques des éléments et en second lieu, d'évaluer l'évolution du processus de remédiation dans le temps. Le site étudié dans ce travail est situé dans la Bahía de Ite, au sud du Pérou, au bord de l'Océan Pacifique. Les déchets miniers en question sont déposés dans un environnement marin. De 1940 à 1996, les déchets de deux mines de porphyre cuprifère - Cuajone et Toquepala - ont été acheminés sur le site via la rivière Locumba. En 1997, une première remédiation a été initiée avec la construction d'une zone humide sur les tailings. Depuis, environ 90% de la surface du dépôt (16 km2) a été traité, les parties restantes étant la zone centrale du delta du Locumba et certaines zones proches de la plage. Malgré la proximité de l'océan, les études isotopiques menées dans le cadre de ce travail ont montré que les tailings étaient saturés en eau douce. Cette saturation est due à la pression hydraulique résultant de la mise en place des zones humides. Un écoulement d'eau souterrain sous-marin a été à détecté à l'interface entre les résidus et l'ancien fond marin. En raison de la géologie locale, il constitue une source d'entrée de SO4 2-, Cl-, Na+, FeZ+, et Mn2+ dans le système. L'analyse de la géochimie aquatique, la Diffraction aux Rayons X (XRD) et l'extraction séquentielle ont montré que l'oxydation du fer et .des sulfures est le principal processus se produisant dans les déchets non remédiés. Ceci a entraîné le développement d'une zone d'oxydation à pH bas induisant une forte accumulation des sels efflorescents, conséquence de la migration capillaire des métaux lourds (Fe, Cu, Zn, Mn, Cd, Co et Ni) de la solution vers la surface dans ce climat aride. Cette étude a montré également que la construction de la zone humide a eu comme résultats une précipitation des métaux dans des phases minérales en raison du pH neutre et des conditions réductrices (100-150mV). Les métaux lourds ont précipité sous la forme d'hydroxydes et de sulfures ou sont adsorbés à la matière organique. L'analyse de la composition de la communauté bactérienne à l'aide la technique T-RFLP (Terminal Restriction Fragment Length Polymorphism) et par le clonage/séquençage des gènes de l'ARNr 16S a été combinée à une statistique détaillée. Cette dernière a révélé une forte corrélation entre la distribution de bactéries spécifiques et la géochimie : Les bactéries autotrophes acidophiles dominent dans les déchets oxydés non remédiés, tandis que des bactéries hétérotrophes neutrophiles ont mené les processus microbiens dans les déchets remédiés sous la zone humide. Sous la surface de la zone humide, nos analyses ont également mis en évidence un cycle du fer par des processus d'oxydoréduction rendus possibles par la présence de niches micro-aérées par la rhizosphère dans cet environnement réducteur. L'expérience de bio-remédiation in situ a montré que les paramètres clés qui contrôlent l'efficacité du traitement sont le niveau de la nappe aquifère et la chimie de l'eau. Les cellules de remédiation se sont montrées plus efficaces et plus rapides lorsque le système a pu être saturé en eau. Finalement, cette étude a montré que la bio-remédiation de déchets miniers par la construction de zones humides est un moyen de traitement efficace, rapide et peu coûteux. Cependant, la saturation en eau du système doit être gérée sur le long terme afin de garantir la stabilité de l'ensemble du système.

Evaluating thermal treeline indicators based on air and soil temperature using an air-to-soil temperature transfer model

In recent research, both soil (root-zone) and air temperature have been used as predictors for the treeline position worldwide. In this study, we intended to (a) test the proposed temperature limitation at the treeline, and (b) investigate effects of season length for both heat sum and mean temperature variables in the Swiss Alps. As soil temperature data are available for a limited number of sites only, we developed an air-to-soil transfer model (ASTRAMO). The air-to-soil transfer model predicts daily mean root-zone temperatures (10cm below the surface) at the treeline exclusively from daily mean air temperatures. The model using calibrated air and root-zone temperature measurements at nine treeline sites in the Swiss Alps incorporates time lags to account for the damping effect between air and soil temperatures as well as the temporal autocorrelations typical for such chronological data sets. Based on the measured and modeled root-zone temperatures we analyzed. the suitability of the thermal treeline indicators seasonal mean and degree-days to describe the Alpine treeline position. The root-zone indicators were then compared to the respective indicators based on measured air temperatures, with all indicators calculated for two different indicator period lengths. For both temperature types (root-zone and air) and both indicator periods, seasonal mean temperature was the indicator with the lowest variation across all treeline sites. The resulting indicator values were 7.0 degrees C +/- 0.4 SD (short indicator period), respectively 7.1 degrees C +/- 0.5 SD (long indicator period) for root-zone temperature, and 8.0 degrees C +/- 0.6 SD (short indicator period), respectively 8.8 degrees C +/- 0.8 SD (long indicator period) for air temperature. Generally, a higher variation was found for all air based treeline indicators when compared to the root-zone temperature indicators. Despite this, we showed that treeline indicators calculated from both air and root-zone temperatures can be used to describe the Alpine treeline position.

Petrology and chemistry of the Chalten Plutonic Complex and implications on the magmatic and tectonic evolution of the Southernmost Andes (Patagonia) during the Miocene

Résumé Scientific:Pétrologie et Géochimie du Complexe Plutonique de Chaltén et les conséquences pour l'évolution magmatique et tectonique du Andes du Sud (Patagonia) pendant le MiocèneLe sujet de cette thèse est le Complexe Plutonique de Chaltén (CHPC), situé à la frontière entre le Chili et l'Argentine, en Patagonie (49°15'S). Ce complexe s'est mis en place au début du Miocène, dans un contexte de changements tectoniques importants. La géométrie et la vitesse de migration des plaques en Patagonie a été modifiée suite l'ouverture de la plaque Farallon il y a 25Ma (Pardo-Casas and Molnar 1987) et la subduction de la ride active du Chili sous la plaque sud-américaine il y a 14Ma (Cande and Leslie 1986). Les effets de cette reconfiguration tectonique sur la morphologie et le magmatisme de la plaque supérieure sont encore sujets à discussion. Dans ce contexte, un groupe d'intrusions miocènes - telle que le CHPC - est particulièrement intriguant, car en position transitionnelle entre le batholithe patagonien et l'arc volcanique cénozoïque et récent à l'ouest, et les laves de plateau de Patagonie à l'est (Fig. 1). A cause de leur position tectonique transitoire, ces plutons isolés hors du batholithe représentent un endroit clé pour comprendre les interactions entre la tectonique à large échelle et le magmatisme en Patagonie. Ici, je présente de nouvelles données de terrain, petrologiques, géochimiques et géochronologiques dans le but de caractériser la nature du CHPC, qui était largement inconnu avant cette étude, dans le but de tester l'hypothèse de migration de l'arc et erosion par subduction.Les résultats de l'investigation géochimique (chapitre 2) montrent que le CHPC n'est qu'un exemple parmi les plutons isolés d'arrière arc ave une composition calco-alcaline caractéristique, c-à-d une signature d'arc. La plupart de ces plutons isolés ont une composition alcaline. Le CHPC, contrairement, a une signature calco-alcaline avec Κ intermédiaire, tel que le batholithe patagonien et la plupart des roches volcaniques quaternaires liées à l'arc le long des Andes.De nouvelles données géochronologiques U-Pb de haute précision sur des zircons, acquis par TIMS, sur le CHPC donnent des âges entre 17.0 et 16.4Ma. Les âges absolus sont en accord avec la séquence intrusive déduite des relations de terrain (chapitre 1). Ces données sont les premières contraintes d'âge U-Pb sur le CHPC. Elles montrent clairement que l'histoire magmatique du CHPC n'a pas de lien direct avec la subduction de la ride à cette latitude (Cande and Leslie 1986), car le complexe est au moins 6Ma plus ancien.Une comparaison en profondeur avec les autres intrusions d'âge Miocène en Patagonie révèlent - pour la première fois - une évolution temporelle intéressante. Il y a une tendance E-W distincte au magmatisme calco-alcalin entre 20-16Ma avec une diminution de l'âge vers l'est - le CHPC est l'expression la plus orientale de cette tendance. Je suggère que la relation espace-temps reflète une migration vers l'est (vers le continent) de l'arc magmatique. Je propose que le facteur principal contrôlant cette migration est la subduction rapide suite à la reconfiguration de la vitesse des plaques tectoniques après l'ouverture la plaque Farallon (à ~26Ma) qui résulterait en une déformation importante ainsi qu'à des taux élevés d'érosion dans la fosse de subduction.Les rapports d'isotopes radiogéniques (Pb, Sr, Nd) élevés, une signature 6018 basse et un rapport Th/La élevé sont des paramètres distinctifs pour les roches mafiques du CHPC. Le modèle isotopique présenté (chapitre 2) suggère que cette signature reflète une contamination de la source, dans le coin de manteau, plutôt qu'une contamination crustale. La signature des éléments en trace du CHPC indiquent que le coin de manteau a été contaminé par des composés terrigènes, le plus vraisemblablement par des sédiments paléozoïques.Les travaux de terrain, la pétrographie et la géothermobarométrie ont été utilisés dans le but de comprendre l'histoire interne du CHPC (chapitre 3). Ces données suggèrent deux niveaux distincts de cristallisation : l'un dans la croûte moyenne (6 à 4.5kbar) et l'autre à un niveau peu profond (3.5 à 2kbar). La modélisation isotopique AFC de la contamination crustale indique des taux variables d'assimilation, qui ne sont pas corrélés avec le degré de différenciation. Cela suggère que différents volumes de magma se sont différenciés en profondeur, de façon indépendante. Cela implique que le CHPC se serait formés en plusieurs puises de magmas provenant d'au moins trois sources différentes. Les textures des granodiorites et des granites indiquent des teneurs élevées en cristaux avant la mise en place et, par conséquent, des températures d'emplacement faibles. Les observations de terrain montrent que les roches mafiques sont déformées, alors que ce n'est pas le cas pour les granodiorites et granites (plus jeunes). La déformation des roches mafiques est encore sujet de recherche, afin de savoir si elle est liée à la déformation régionale en régime compressif ou à l'emplacement lui-même. Cependant, la mise en place de grand volume de magma felsique riche en cristaux suggère un régime d'extension.Scientific Abstract:Petrology and chemistry of the Chaltén Plutonic Complex and implications on the magmatic and tectonic evolution of the Southernmost Andes (Patagonia) during the MioceneThe subject of this thesis is the Chaltén Plutonic Complex (CHPC) located at the frontier between Chile and Argentina in Patagonia (at 49° 15 'Southern latitude). This complex intruded during early Miocene in a context of major tectonics changes. The plate geometry of Patagonia has been modified by changes in the plate motions after the break up of the Farallôn plate at 25Ma (Pardo-Casas and Molnar 1987) and by the subduction of the Chile spreading Ridge beneath South-America at 14 Ma (Cande and Leslie 1986). The effects of this tectonic setting on the morphology and the magmatism of the overriding plate are a matter of on-going discussion. Particularly intriguing in this context is a group of isolated Miocene intrusions - like the CHPC - which are located in a transitional position between the Patagonian Batholith and the Cenozoic and Recent volcanic arc in the West, and the Patagonian plateau lavas in the East (Fig. 1). Due to their transient tectonic position these isolated plutons outside the batholith represent a key to understanding the interaction between global-scale tectonics and magmatism in Patagonia. Here, I present new field, penological, geochemical and geochronological data to characterize the nature of the CHPC, which was largely unknown before this study, in order to test the hypothesis of time- transgressive magmatism.The results of the geochemical investigation (Chapter 2) show that the CHPC is only one among these isolated back-arc plutons with a characteristic calc-alkaline composition, i.e. arc signature. Most of these isolated intrusives have an alkaline character. The CHPC, in contrast, has a medium Κ calc-alkaline signature, like the Patagonian batholith and most of the Quaternary arc-related volcanic rocks along the Andes.New high precision TIMS U-Pb zircon dating of the CHPC yield ages between 17.0 to 16.4 Ma. The absolute ages support the sequence of intrusion relations established in the field (Chapter 1). These data are the first U-Pb age constraints on the CHPC, and clearly show that the magmatic history of CHPC has no direct link to the subduction of the ridge, since this complex is at least 6 Ma older than the time of collision of the Chile ridge at this latitude (Cande and Leslie 1986).An in-depth comparison with other intrusion of Miocene age in Patagonia reveals - for the first time - an interesting temporal pattern. There is a distinct E-W trend of calc-alkaline magmatism between 20-16 Ma with the younging of ages in the East - the CHPC is the easternmost expression of this trend. I suggest that this time-space relation reflects an eastward (landward) migration of the magmatic arc. I propose that main factor controlling this migration is the fast rates of subduction after the major reconfigurations of the plate tectonic motions after the break up of the Farallôn Plate (at -26 ) resulting in strong deformation and high rates of subduction erosion.High radiogenic isotope ratios (Pb, Sr, Nd) ratios, low 5018 signature and high Th/La ratios in mafic rocks are distinctive features of the CHPC. The presented isotopic models (Chapter 2) suggest that this signature reflects source contamination of the mantle wedge rather than crustal contamination. The trace element signature of the CHPC indicates that the mantle wedge was contaminated with a terrigenous component, most likely from Paleozoic sediments.Fieldwork, petrography and geothermobarometry were used to further unravel the internal history of the CHPC (Chapter 3). These data suggest two main levels of crystallization: one a mid crustal levels (6 to 4.5 kbar) and other a shallow level (3.5 to 2 kbar). Isotopic AFC modeling of crustal contamination indicate variable rates of assimilation, which are not correlated with the degree of differentiation. This suggests that different batches of magma differentiate independently at depths. This implies that the CHPC would have formed by several pulses of magmas from at least 3 different sources. Textures of granodiorites and granites indicate a high content of crystals previous to the emplacement and consequently low emplacement temperatures. Field observations show that the mafic rocks are deformed, whereas the (younger) granodiorites and granites are not. It is still subject of investigation whether the deformation of the mafic rocks is related to regional deformation during a compressional regime or to the emplacement it self. However, the emplacement of huge amount of crystal rich felsic magmas suggests an extensional regime.Résumé Grand PublicPétrologie et Géochimie du Complexe Plutonique de Chaltén et les conséquences pour l'évolution magmatique et tectonique du Andes du Sud (Patagonia) pendant le MiocèneLe Complexe Plutonique de Chaltén (CHPC) est un massif montagneux situé à 49°S à la frontière entre le Chili et l'Argentine, en Patagonie (région la plus au sud de l'Amérique du Sud). Il est composé de montagnes qui peuvent atteindre plus de 3000 mètres d'altitude, telles que le Cerro Fitz Roy (3400m) et le Cerro Torre (3100m). Ces montagnes sont composées de roches plutoniques, c.-à-d. des magmas qui se sont refroidis et ont cristallisés sous la surface terrestre.La composition chimique de ces roches montre que les magmas, qui ont formé ce complexe plutonique, font partie d'un volcanisme d'arc. Celui-ci se forme lorsqu'une plaque océanique plonge sous une plaque continentale. Les géologues appellent ce processus « subduction ». Dans un tel scénario, le manteau terrestre, qui se fait prendre entre ces deux plaques, fond pour former ainsi du magma. Ce magma remonte à travers la plaque continentale vers la surface. Si celui-ci atteint la surface, il forme les roches volcaniques, comme par exemple des laves. S'il n'atteint pas la surface, le magma se refroidit pour former finalement les roches plutoniques.Le long de la marge ouest d'Amérique du Sud, la plaque Nazca - qui se situe au sud-est de la plaque océanique pacifique - passe en dessous de la plaque d'Amérique du Sud. La bordure ouest du sud de la plaque sud-américaine a également été affectée par d'autres processus tectoniques, tels que des changements dramatiques dans les déplacements de plaques (il y a 25Ma) et la collision de la ride du Chili (depuis 15 Ma jusqu'à aujourd'hui). Ces caractéristiques tectoniques et magmatiques font de cette région un haut lieu pour les géologues. La plaque Nazca, s'est formée suite à l'ouverture d'une plaque océanique plus ancienne, il y a 25Ma. Cette ouverture est liée aux vitesses de subduction les plus rapides jamais connues. La ride du Chili est l'endroit où le sol de l'Océan Pacifique s'ouvre, formant deux plaques océaniques : les plaques Nazca et Antarctique. La ride du Chili subducte sous la plaque sud-américaine depuis 15Ma, en association avec la formation de grands volumes de magma ainsi que des changements morphologiques importants. La question de savoir lequel de ces changements tectoniques globaux affecte la géologie et la géographie de Patagonie a été, et est encore, discutée pendant de nombreuses années. De nombreux chercheurs suggèrent que la plupart des caractéristiques morphologiques et magmatiques en Patagonie sont liés à la subduction de la ride du Chili, mais cette suggestion est encore débattue comme le montre notre étude.Le batholithe de Patagonie du sud (SPB) est un énorme massif composé de roches plutoniques et il s'étend tout au long de la côte ouest de Patagonie (au sud de 47°S). Ces roches correspondent certainement aux racines d'un ancien arc volcanique, qui a été soulevé et érodé. Le CHPC, ainsi que d'autres petites intrusions dans la région, se situe dans une position exotique, à 100km à l'est du SPB. Certains chercheurs suggèrent que ces intrusions pourraient être liées à la subduction de la ride du Chili.Afin de débattre de cette problématique, nous avons utilisé différentes méthodes géochronologiques pour déterminer l'âge du CHPC et le comparer (a) à l'âge des roches intrusives similaires du SPB et (b) à l'âge de la collision de la ride du Chili. Dans ce travail, nous prouvons que le CHPC s'est formé au moins 7Ma avant la collision avec la ride du Chili. Sur la base des âges du CHPC et de la composition chimique de ses roches et minéraux, nous proposons que le CHPC fait partie d'un arc volcanique ancien. La migration de l'arc volcanique plus profondément dans le continent résulte de la grande vitesse de subduction entre 25 et lOMa. Des caractéristiques évidentes pour un tel processus - telles qu'une déformation importante et une vitesse d'érosion élevée - peuvent être rencontrées tout au long de la bordure ouest de l'Amérique du sud.

Apoplastic polyesters in Arabidopsis surface tissues--a typical suberin and a particular cutin.

Cutinized and suberized cell walls form physiological important plant-environment interfaces as they act as barriers limiting water and nutrient loss and protect from radiation and invasion by pathogens. Due to the lack of protocols for the isolation and analysis of cutin and suberin in Arabidopsis, the model plant for molecular biology, mutants and transgenic plants with a defined altered cutin or suberin composition are unavailable, causing that structure and function of these apoplastic barriers are still poorly understood. Transmission electron microscopy (TEM) revealed that Arabidopsis leaf cuticle thickness ranges from only 22 nm in leaf blades to 45 nm on petioles, causing the difficulty in cuticular membrane isolation. We report the use of polysaccharide hydrolases to isolate Arabidopsis cuticular membranes, suitable for depolymerization and subsequent compositional analysis. Although cutin characteristic omega-hydroxy acids (7%) and mid-chain hydroxylated fatty acids (8%) were detected, the discovery of alpha,omega-diacids (40%) and 2-hydroxy acids (14%) as major depolymerization products reveals a so far novel monomer composition in Arabidopsis cutin, but with chemical analogy to root suberin. Histochemical and TEM analysis revealed that suberin depositions were localized to the cell walls in the endodermis of primary roots and the periderm of mature roots of Arabidopsis. Enzyme digested and solvent extracted root cell walls when subjected to suberin depolymerization conditions released omega-hydroxy acids (43%) and alpha,omega-diacids (24%) as major components together with carboxylic acids (9%), alcohols (6%) and 2-hydroxyacids (0.1%). This similarity to suberin of other species indicates that Arabidopsis roots can serve as a model for suberized tissue in general.

Wear of two artificial tooth materials in vivo: a 12-month pilot study.

STATEMENT OF PROBLEM: Wear of methacrylate artificial teeth resulting in vertical loss is a problem for both dentists and patients. PURPOSE: The purpose of this study was to quantify wear of artificial teeth in vivo and to relate it to subject and tooth variables. MATERIAL AND METHODS: Twenty-eight subjects treated with complete dentures received 2 artificial tooth materials (polymethyl methacrylate (PMMA)/double-cross linked PMMA fillers; 35%/59% (SR Antaris DCL, SR Postaris DCL); experimental 48%/46%). At baseline and after 12 months, impressions of the dentures were poured with improved stone. After laser scanning, the casts were superimposed and matched. Maximal vertical loss (mm) and volumetric loss (mm(3)) were calculated for each tooth and log-transformed to reduce variability. Volumetric loss was related to the occlusally active surface area. Linear mixed models were used to study the influence of the factors jaw, tooth, and material on adjusted (residual) wear values (alpha=.05). RESULTS: Due to drop outs (n=5) and unmatchable casts (n=3), 69% of all teeth were analyzed. Volumetric loss had a strong linear relationship to surface area (P<.001); this was less pronounced for vertical loss (P=.004). The factor showing the highest influence was the subject. Wear was tooth dependent (increasing from incisors to molars). However, these differences diminished once the wear rates were adjusted for occlusal area, and only a few remained significant (anterior versus posterior maxillary teeth). Another influencing factor was the age of the subject. CONCLUSIONS: Clinical wear of artificial teeth is higher than previously measured or expected. The presented method of analyzing wear of artificial teeth using a laser-scanning device seemed suitable.

Body surface area and body weight predict total liver volume in Western adults.

Computed tomography (CT) is used increasingly to measure liver volume in patients undergoing evaluation for transplantation or resection. This study is designed to determine a formula predicting total liver volume (TLV) based on body surface area (BSA) or body weight in Western adults. TLV was measured in 292 patients from four Western centers. Liver volumes were calculated from helical computed tomographic scans obtained for conditions unrelated to the hepatobiliary system. BSA was calculated based on height and weight. Each center used a different established method of three-dimensional volume reconstruction. Using regression analysis, measurements were compared, and formulas correlating BSA or body weight to TLV were established. A linear regression formula to estimate TLV based on BSA was obtained: TLV = -794.41 + 1,267.28 x BSA (square meters; r(2) = 0.46; P &lt;.0001). A formula based on patient weight also was derived: TLV = 191.80 + 18.51 x weight (kilograms; r(2) = 0.49; P &lt;.0001). The newly derived TLV formula based on BSA was compared with previously reported formulas. The application of a formula obtained from healthy Japanese individuals underestimated TLV. Two formulas derived from autopsy data for Western populations were similar to the newly derived BSA formula, with a slight overestimation of TLV. In conclusion, hepatic three-dimensional volume reconstruction based on helical CT predicts TLV based on BSA or body weight. The new formulas derived from this correlation should contribute to the estimation of TLV before liver transplantation or major hepatic resection.

Stoneley wave modeling in heterogeneous porous media with viscous pore fluids

We implemented Biot-type porous wave equations in a pseudo-spectral numerical modeling algorithm for the simulation of Stoneley waves in porous media. Fourier and Chebyshev methods are used to compute the spatial derivatives along the horizontal and vertical directions, respectively. To prevent from overly short time steps due to the small grid spacing at the top and bottom of the model as a consequence of the Chebyshev operator, the mesh is stretched in the vertical direction. As a large benefit, the Chebyshev operator allows for an explicit treatment of interfaces. Boundary conditions can be implemented with a characteristics approach. The characteristic variables are evaluated at zero viscosity. We use this approach to model seismic wave propagation at the interface between a fluid and a porous medium. Each medium is represented by a different mesh and the two meshes are connected through the above described characteristics domain-decomposition method. We show an experiment for sealed pore boundary conditions, where we first compare the numerical solution to an analytical solution. We then show the influence of heterogeneity and viscosity of the pore fluid on the propagation of the Stoneley wave and surface waves in general.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Biotic and abiotic variables show little redundancy in explaining tree species distributions

Abiotic factors such as climate and soil determine the species fundamental niche, which is further constrained by biotic interactions such as interspecific competition. To parameterize this realized niche, species distribution models (SDMs) most often relate species occurrence data to abiotic variables, but few SDM studies include biotic predictors to help explain species distributions. Therefore, most predictions of species distributions under future climates assume implicitly that biotic interactions remain constant or exert only minor influence on large-scale spatial distributions, which is also largely expected for species with high competitive ability. We examined the extent to which variance explained by SDMs can be attributed to abiotic or biotic predictors and how this depends on species traits. We fit generalized linear models for 11 common tree species in Switzerland using three different sets of predictor variables: biotic, abiotic, and the combination of both sets. We used variance partitioning to estimate the proportion of the variance explained by biotic and abiotic predictors, jointly and independently. Inclusion of biotic predictors improved the SDMs substantially. The joint contribution of biotic and abiotic predictors to explained deviance was relatively small (similar to 9%) compared to the contribution of each predictor set individually (similar to 20% each), indicating that the additional information on the realized niche brought by adding other species as predictors was largely independent of the abiotic (topo-climatic) predictors. The influence of biotic predictors was relatively high for species preferably growing under low disturbance and low abiotic stress, species with long seed dispersal distances, species with high shade tolerance as juveniles and adults, and species that occur frequently and are dominant across the landscape. The influence of biotic variables on SDM performance indicates that community composition and other local biotic factors or abiotic processes not included in the abiotic predictors strongly influence prediction of species distributions. Improved prediction of species' potential distributions in future climates and communities may assist strategies for sustainable forest management.

Combined transesophageal and surface MRI provides optimal imaging in aortic atherosclerosis.

OBJECTIVE: Surface magnetic resonance imaging (MRI) for aortic plaque assessment is limited by the trade-off between penetration depth and signal-to-noise ratio (SNR). For imaging the deep seated aorta, a combined surface and transesophageal MRI (TEMRI) technique was developed 1) to determine the individual contribution of TEMRI and surface coils to the combined signal, 2) to measure the signal improvement of a combined surface and TEMRI over surface MRI, and 3) to assess for reproducibility of plaque dimension analysis. METHODS AND RESULTS: In 24 patients six black blood proton-density/T2-weighted fast-spin echo images were obtained using three surface and one TEMRI coil for SNR measurements. Reproducibility of plaque dimensions (combined surface and TEMRI) was measured in 10 patients. TEMRI contributed 68% of the signal in the aortic arch and descending aorta, whereas the overall signal gain using the combined technique was up to 225%. Plaque volume measurements had an intraclass correlation coefficient of as high as 0.97. CONCLUSION: Plaque volume measurements for the quantification of aortic plaque size are highly reproducible for combined surface and TEMRI. The TEMRI coil contributes considerably to the aortic MR signal. The combined surface and TEMRI approach improves aortic signal significantly as compared to surface coils alone. CONDENSED ABSTRACT: Conventional MRI aortic plaque visualization is limited by the penetration depth of MRI surface coils and may lead to suboptimal image quality with insufficient reproducibility. By combining a transesophageal MRI (TEMRI) with surface MRI coils we enhanced local and overall image SNR for improved image quality and reproducibility.

Oligopotent stem cells are distributed throughout the mammalian ocular surface.

The integrity of the cornea, the most anterior part of the eye, is indispensable for vision. Forty-five million individuals worldwide are bilaterally blind and another 135 million have severely impaired vision in both eyes because of loss of corneal transparency; treatments range from local medications to corneal transplants, and more recently to stem cell therapy. The corneal epithelium is a squamous epithelium that is constantly renewing, with a vertical turnover of 7 to 14 days in many mammals. Identification of slow cycling cells (label-retaining cells) in the limbus of the mouse has led to the notion that the limbus is the niche for the stem cells responsible for the long-term renewal of the cornea; hence, the corneal epithelium is supposedly renewed by cells generated at and migrating from the limbus, in marked opposition to other squamous epithelia in which each resident stem cell has in charge a limited area of epithelium. Here we show that the corneal epithelium of the mouse can be serially transplanted, is self-maintained and contains oligopotent stem cells with the capacity to generate goblet cells if provided with a conjunctival environment. Furthermore, the entire ocular surface of the pig, including the cornea, contains oligopotent stem cells (holoclones) with the capacity to generate individual colonies of corneal and conjunctival cells. Therefore, the limbus is not the only niche for corneal stem cells and corneal renewal is not different from other squamous epithelia. We propose a model that unifies our observations with the literature and explains why the limbal region is enriched in stem cells.

Staphylococcal biofilm formation on the surface of three different calcium phosphate bone grafts: a qualitative and quantitative in vivo analysis.

Differences in physico-chemical characteristics of bone grafts to fill bone defects have been demonstrated to influence in vitro bacterial biofilm formation. Aim of the study was to investigate in vivo staphylococcal biofilm formation on different calcium phosphate bone substitutes. A foreign-body guinea-pig infection model was used. Teflon cages prefilled with β-tricalcium phosphate, calcium-deficient hydroxyapatite, or dicalcium phosphate (DCP) scaffold were implanted subcutaneously. Scaffolds were infected with 2 × 10(3) colony-forming unit of Staphylococcus aureus (two strains) or S. epidermidis and explanted after 3, 24 or 72 h of biofilm formation. Quantitative and qualitative biofilm analysis was performed by sonication followed by viable counts, and microcalorimetry, respectively. Independently of the material, S. aureus formed increasing amounts of biofilm on the surface of all scaffolds over time as determined by both methods. For S. epidermidis, the biofilm amount decreased over time, and no biofilm was detected by microcalorimetry on the DCP scaffolds after 72 h of infection. However, when using a higher S. epidermidis inoculum, increasing amounts of biofilm were formed on all scaffolds as determined by microcalorimetry. No significant variation in staphylococcal in vivo biofilm formation was observed between the different materials tested. This study highlights the importance of in vivo studies, in addition to in vitro studies, when investigating biofilm formation of bone grafts.

VARIABILITY OF PHENOTYPIC, PROTEOMIC AND TRANSCRIPTOMIC EXPRESSION OF STAPHYLOCOCCUS AUREUS SURFACE ADHESINS

Staphylococcus aureus is a highly successful pathogen responsible of a wide variety of diseases, from minor skin infection to life-threatening sepsis or infective endocarditis, as well as food poisoning and toxic shock syndrome. This heterogeneity of infections and the ability of S. aureus to develop antibiotic-resistance to virtually any available drugs reflect its extraordinary capacity to adapt and survive in a great variety of environments. The pathogenesis of S. aureus infection involves a wide range of cell wall-associated adhesins and extracellular toxins that promote host colonization and invasion. In addition, S. aureus is extremely well equipped with regulatory systems that sense environmental conditions and respond by fine tuning the expression of metabolic and virulence determinants. Surface adhesins referred to MSCRAMMs - for Microbial Surface Component Recognizing Adherence Matrix Molecules - mediate binding to the host extracellular matrix or serum components, including fibrinogen, fibronectin, collagen and elastin, and promote tissue colonization and invasion. Major MSCRAMMs include a family of surface-attached proteins covalently bound to the cell wall peptidoglycan via a conserved LPXTG motif. Genomic analyses indicate that S. aureus contain up to 22 LPXTG surface proteins, which could potentially act individually or in synergy to promote infection. In the first part of this study we determined the range of adherence phenotypes to fibrinogen and fibronectin among 30 carriage isolates of S. aureus and compared it to the adherence phenotypes of 30 infective endocarditis and 30 blood culture isolates. Overall there were great variations in in vitro adherence, but no differences were observed between carriage and infection strains. We further determined the relation between in vitro adherence and in vivo infectivity in a rat model of experimental endocarditis, using 4 isolates that displayed either extremely low or high adherence phenotypes. Unexpectedly, no differences were observed between the in vivo infectivity of isolates that were poorly and highly adherent in vitro. We concluded that the natural variability of in vitro adherence to fibrinogen and fibronectin did not correlate with in vivo infectivity, and thus that pathogenic differences between various strains might only be expressed in in vivo conditions, but not in vitro. Therefore, considering the importance of adhesins expression for infection, direct measurement of those adhesins present on the bacterial surface were made by proteomic approach. 5 In the second series of experiments we assessed the physical presence of the LPXTG species at the staphylococcal surface, as measured at various time points during growth in different culture media. S. aureus Newman was grown in either tryptic soy broth (TSB) or in Roswell Park Memorial Institute (RPMI) culture medium, and samples were removed from early exponential growth phase to late stationary phase. Experiments were performed with mutants in the global accessory-gene regulator (agr), surface protein A (Spa) and clumping factor A (ClfA). Peptides of surface proteins were recovered by "trypsin-shaving" of live bacteria, and semi-quantitative proteomic analysis was performed by tandem liquid-chromatography and mass-spectrometry (LC-MS). We also determined in parallel the mRNA expression by microarrays analysis, as well as the phenotypic adherence of the bacteria to fibrinogen in vitro. The surface proteome was highly complex and contained numerous proteins theoretically not belonging to the bacterial envelope, including ribosomal proteins and metabolic enzymes. Sixteen of the 21 known LPXTG species were detected, but were differentially expressed. As expected, 9 known agr-regulated proteins (e.g. including Spa, FnBPA, ClfA, IsdA, IsdB, SasH, SasD, SasG and FmtB) increased up to the late exponential growth phase, and were abrogated in agr-negative mutants. However, only Spa and SasH modified their proteomic and mRNA profiles in parallel in the parent and its agr negative mutant, while all other LPXTG proteins modified their proteomic profiles independently of their mRNA. Moreover, ClfA became highly transcribed and active in in vitro fibrinogen adherence tests during late growth (24h), whereas it remained poorly detected by proteomics. Differential expression was also detected in iron-rich TSB versus iron-poor RPMI. Proteins from the iron-regulated surface determinant (isd) system, including IsdA, IsdB and IsdH were barely expressed in iron-rich TSB, whereas they increased their expression by >10 time in iron-poor RPMI. We conclude that semi-quantitative proteomic analysis of specific protein species is feasible in S. aureus and that proteomic, transcriptomic and adherence phenotypes demonstrated differential profiles in S. aureus. Furthermore, peptide signatures released by trypsin shaving suggested differential protein domain exposures in various environments, which might be relevant for antiadhesins vaccines. A comprehensive understanding of the S. aureus physiology should integrate all these approaches.