Glycogen storage capacity and de novo lipogenesis during massive carbohydrate overfeeding in man.

The metabolic balance method was performed on three men to investigate the fate of large excesses of carbohydrate. Glycogen stores, which were first depleted by diet (3 d, 8.35 +/- 0.27 MJ [1994 +/- 65 kcal] decreasing to 5.70 +/- 1.03 MJ [1361 +/- 247 kcal], 15% protein, 75% fat, 10% carbohydrate) and exercise, were repleted during 7 d carbohydrate overfeeding (11% protein, 3% fat, and 86% carbohydrate) providing 15.25 +/- 1.10 MJ (3642 +/- 263 kcal) on the first day, increasing progressively to 20.64 +/- 1.30 MJ (4930 +/- 311 kcal) on the last day of overfeeding. Glycogen depletion was again accomplished with 2 d of carbohydrate restriction (2.52 MJ/d [602 kcal/d], 85% protein, and 15% fat). Glycogen storage capacity in man is approximately 15 g/kg body weight and can accommodate a gain of approximately 500 g before net lipid synthesis contributes to increasing body fat mass. When the glycogen stores are saturated, massive intakes of carbohydrate are disposed of by high carbohydrate-oxidation rates and substantial de novo lipid synthesis (150 g lipid/d using approximately 475 g CHO/d) without postabsorptive hyperglycemia.

Assessment of the capacity to consent to treatment in patients admitted to acute medical wards.

BACKGROUND: Assessment of capacity to consent to treatment is an important legal and ethical issue in daily medical practice. In this study we carefully evaluated the capacity to consent to treatment in patients admitted to an acute medical ward using an assessment by members of the medical team, the specific Silberfeld's score, the MMSE and an assessment by a senior psychiatrist. METHODS: Over a 3 month period, 195 consecutive patients of an internal medicine ward in a university hospital were included and their capacity to consent was evaluated within 72 hours of admission. RESULTS: Among the 195 patients, 38 were incapable of consenting to treatment (unconscious patients or severe cognitive impairment) and 14 were considered as incapable of consenting by the psychiatrist (prevalence of incapacity to consent of 26.7%). Agreement between the psychiatrist's evaluation and the Silberfeld questionnaire was poor (sensitivity 35.7%, specificity 91.6%). Experienced clinicians showed a higher agreement (sensitivity 57.1%, specificity 96.5%). A decision shared by residents, chief residents and nurses was the best predictor for agreement with the psychiatric assessment (sensitivity 78.6%, specificity 94.3%). CONCLUSION: Prevalence of incapacity to consent to treatment in patients admitted to an acute internal medicine ward is high. While the standardized Silberfeld questionnaire and the MMSE are not appropriate for the evaluation of the capacity to consent in this setting, an assessment by the multidisciplinary medical team concurs with the evaluation by a senior psychiatrist.

IgG subclass switch capacity is low in switched and in IgM-only, but high in IgD+IgM+, post-germinal center (CD27+) human B cells.

Recent studies have shown that in humans the germinal center reactions produce three types of V(D)J mutated B cells in similar proportions, i.e. Ig-switched, IgD-IgM+ (IgM-only) and IgD+IgM+ cells, and that together they form the CD27+ compartment of recirculating B cells. We investigated the Ig isotype switch capacity of these cells. Peripheral blood B subsets were sorted and IgG subclass secretion in presence or absence of IL-4 was compared in B cell assays which lead to Ig secretion in all (coculture with EL-4 thymoma cells) or only in CD27+ (CD40L stimulation) B cells. Already switched IgG+ B cells showed no significant sequential switch and IgM-only cells also had a low switch capacity, but IgD+CD27+ switched as much as IgD+CD27- B cells to all IgG subclasses. Thus, in switched B cells some alterations compromising further switch options occur frequently; IgM-only cells may result from aborted switch. However, IgD+CD27+ human B cells, extensively V(D)J mutated and "naive" regarding switch, build up a repertoire of B cells combining (1) novel cross-reactive specificities, (2) increased differentiation capacity (including after T-independent stimulation by Staphylococcus aureus Cowan I) and (3) the capacity to produce appropriate isotypes when they respond to novel pathogens.

Colonisation capacity of the Greater white-toothed shrew Crocidura russula : an experimental study

greater white toothed shrew; Crocidura russula; colonisation capacity

Impact of lung function changes after induction radiochemotherapy on resected T4 non-small cell lung cancer outcome.

BACKGROUND: Induction radiochemotherapy, followed by resection, for T4 non-small cell lung cancer, has shown promising long-term survival but may be associated with increased postoperative morbidity and death, depending on patient selection. Here, we determined the effect of induction radiochemotherapy on pulmonary function and whether postinduction pulmonary function changes predict hospital morbidity and death and long-term survival. METHODS: A consecutive prospective cohort of 72 patients with T4 N0-2 M0 non-small cell lung cancer managed by radiochemotherapy, followed by resection, is reported. All patients underwent thoracoabdominal computed tomography or fusion positron emission tomography-computed tomography, brain imaging, mediastinoscopy, echocardiography, ventilation-perfusion scintigraphy, and pulmonary function testing before and after induction therapy. Resection was performed if the postoperative forced expiratory volume in 1 second and diffusion capacity of the lung for carbon monoxide exceeded 30% predicted and if the postoperative maximum oxygen consumption exceeded 10 mL/kg/min. RESULTS: The postoperative 90-day mortality rate was 8% (lobectomy, 2%; pneumonectomy, 21%; p=0.01). All deaths after pneumonectomy occurred after right-sided procedures. The 3-year and 5-year survival was 50% (95% confidence interval, 36% to 62%) and 45% (95% confidence interval, 31% to 57%) and was significantly associated with completeness of resection (p=0.004) and resection type (pneumonectomy vs lobectomy, p=0.01). There was no correlation between postinduction pulmonary function changes and postoperative morbidity or death or long-term survival in patients managed by lobectomy or pneumonectomy. CONCLUSIONS: In properly selected patients with T4 N0-2 M0 non-small cell lung cancer, resection after induction radiochemotherapy can be performed with a reasonable postoperative mortality rate and long-term survival, provided the resection is complete and a right-sided pneumonectomy is avoided. Postinduction pulmonary function changes did not correlate with postoperative morbidity or death or with long-term outcome.

The lower quality of preventive care among forced migrants in a country with universal healthcare coverage.

OBJECTIVE: To assess the association between socio-demographic factors and the quality of preventive care and chronic care of cardiovascular (CV) risk factors in a country with universal health care coverage. METHODS: Our retrospective cohort assessed a random sample of 966 patients aged 50-80years followed over 2years (2005-2006) in 4 Swiss university primary care settings (Basel/Geneva/Lausanne/Zürich). We used RAND's Quality Assessment Tools indicators and examined recommended preventive care among different socio-demographic subgroups. RESULTS: Overall patients received 69.6% of recommended preventive care. Preventive care indicators were more likely to be met among men (72.8% vs. 65.4%; p<0.001), younger patients (from 71.0% at 50-59years to 66.7% at 70-80years, p for trend=0.03) and Swiss patients (71.1% vs. 62.7% in forced migrants; p=0.001). This latter difference remained in multivariate analysis adjusted for gender, age, civil status and occupation (OR 0.68; 95% CI 0.54-0.86). Forced migrants had lower scores for physical examination and breast and colon cancer screening (all p≤0.02). No major differences were seen for chronic care of CV risk factors. CONCLUSION: Despite universal healthcare coverage, forced migrants receive less preventive care than Swiss patients in university primary care settings. Greater attention should be paid to forced migrants for preventive care.

Skeletal muscle mitochondrial energetics are associated with maximal aerobic capacity and walking speed in older adults.

BACKGROUND: Lower ambulatory performance with aging may be related to a reduced oxidative capacity within skeletal muscle. This study examined the associations between skeletal muscle mitochondrial capacity and efficiency with walking performance in a group of older adults. METHODS: Thirty-seven older adults (mean age 78 years; 21 men and 16 women) completed an aerobic capacity (VO peak) test and measurement of preferred walking speed over 400 m. Maximal coupled (State 3; St3) mitochondrial respiration was determined by high-resolution respirometry in saponin-permeabilized myofibers obtained from percutanous biopsies of vastus lateralis (n = 22). Maximal phosphorylation capacity (ATP) of vastus lateralis was determined in vivo by P magnetic resonance spectroscopy (n = 30). Quadriceps contractile volume was determined by magnetic resonance imaging. Mitochondrial efficiency (max ATP production/max O consumption) was characterized using ATP per St3 respiration (ATP/St3). RESULTS: In vitro St3 respiration was significantly correlated with in vivo ATP (r = .47, p = .004). Total oxidative capacity of the quadriceps (St3*quadriceps contractile volume) was a determinant of VO peak (r = .33, p = .006). ATP (r = .158, p = .03) and VO peak (r = .475, p < .0001) were correlated with preferred walking speed. Inclusion of both ATP/St3 and VO peak in a multiple linear regression model improved the prediction of preferred walking speed (r = .647, p < .0001), suggesting that mitochondrial efficiency is an important determinant for preferred walking speed. CONCLUSIONS: Lower mitochondrial capacity and efficiency were both associated with slower walking speed within a group of older participants with a wide range of function. In addition to aerobic capacity, lower mitochondrial capacity and efficiency likely play roles in slowing gait speed with age.

Effects of bisoprolol fumarate on left ventricular size, function, and exercise capacity in patients with heart failure: analysis with magnetic resonance myocardial tagging.

BACKGROUND: Recent data suggest that beta-blockers can be beneficial in subgroups of patients with chronic heart failure (CHF). For metoprolol and carvedilol, an increase in ejection fraction has been shown and favorable effects on the myocardial remodeling process have been reported in some studies. We examined the effects of bisoprolol fumarate on exercise capacity and left ventricular volume with magnetic resonance imaging (MRI) and applied a novel high-resolution MRI tagging technique to determine myocardial rotation and relaxation velocity. METHODS: Twenty-eight patients (mean age, 57 +/- 11 years; mean ejection fraction, 26 +/- 6%) were randomized to bisoprolol fumarate (n = 13) or to placebo therapy (n = 15). The dosage of the drugs was titrated to match that of the the Cardiac Insufficiency Bisoprolol Study protocol. Hemodynamic and gas exchange responses to exercise, MRI measurements of left ventricular end-systolic and end-diastolic volumes and ejection fraction, and left ventricular rotation and relaxation velocities were measured before the administration of the drug and 6 and 12 months later. RESULTS: After 1 year, heart rate was reduced in the bisoprolol fumarate group both at rest (81 +/- 12 before therapy versus 61 +/- 11 after therapy; P <.01) and peak exercise (144 +/- 20 before therapy versus 127 +/- 17 after therapy; P <.01), which indicated a reduction in sympathetic drive. No differences were observed in heart rate responses in the placebo group. No differences were observed within or between groups in peak oxygen uptake, although work rate achieved was higher (117.9 +/- 36 watts versus 146.1 +/- 33 watts; P <.05) and exercise time tended to be higher (9.1 +/- 1.7 minutes versus 11.4 +/- 2.8 minutes; P =.06) in the bisoprolol fumarate group. A trend for a reduction in left ventricular end-diastolic volume (-54 mL) and left ventricular end-systolic volume (-62 mL) in the bisoprolol fumarate group occurred after 1 year. Ejection fraction was higher in the bisoprolol fumarate group (25.0 +/- 7 versus 36.2 +/- 9%; P <.05), and the placebo group remained unchanged. Most changes in volume and ejection fraction occurred during the latter 6 months of treatment. With myocardial tagging, insignificant reductions in left ventricular rotation velocity were observed in both groups, whereas relaxation velocity was reduced only after bisoprolol fumarate therapy (by 39%; P <.05). CONCLUSION: One year of bisoprolol fumarate therapy resulted in an improvement in exercise capacity, showed trends for reductions in end-diastolic and end-systolic volumes, increased ejection fraction, and significantly reduced relaxation velocity. Although these results generally confirm the beneficial effects of beta-blockade in patients with chronic heart failure, they show differential effects on systolic and diastolic function.

Diving capacity and foraging behaviour of the water shrew (Neomys fodiens)

With regard to semi-aquatic mammals, Schröpfer & Stubbe (1992) distinguished three riparian guilds: the herbivores with the water vole and the beaver; the megacarnivores with the mink and the otter; and the macrocarnivores with water shrews and desmans. Among water shrews, the evolution of aquatic foraging behaviour occurred several times: Nectogale and Chimarrogale in Asia, several species of the genus Sorex in America, and Neomys in Eurasia (Churchfield, 1990). The fairly common European water shrew N. fodiens is the best known. However, the reports on the degree of adaptation to the water habitat are conflicting. Therefore some important findings from the literature are reviewed in this introduction, whereas new data are presented in the following sections. The swimming locomotion of water shrews was analysed by Ruthardt & Schröpfer (1985) and Köhler (1991), and the related morphological adaptation were reviewed by Hutterer (1985) and Churchfield (this volume pp. 49-51). They obviously present a compromise between the requirements for activity on land and in the water. Thermoregulation is a major problem for semi-aquatic mammals, because heat conductance in water is 25-fold greater than in air (Calder, 1969). According to this author, the body temperature of immersed American Sorex palustris dropped by a rate of 2.8 °C per min. However, this may be an experimental artefact, because Neomys fodiens can maintain its body temperature at 37 °C during an immersion of 6 min (Vogel, 1990).

Generation and interconnection capacity expansion in cross-border electricity markets : the need for policy coordination

Electricity is a strategic service in modern societies. Thus, it is extremely important for governments to be able to guarantee an affordable and reliable supply, which depends to a great extent on an adequate expansion of the generation and transmission capacities. Cross- border integration of electricity markets creates new challenges for the regulators, since the evolution of the market is now influenced by the characteristics and policies of neighbouring countries. There is still no agreement on why and how regions should integrate their electricity markets. The aim of this thesis is to improve the understanding of integrated electricity markets and how their behaviour depends on the prevailing characteristics of the national markets and the policies implemented in each country. We developed a simulation model to analyse under what circumstances integration is desirable. This model is used to study three cases of interconnection between two countries. Several policies regarding interconnection expansion and operation, combined with different generation capacity adequacy mechanisms, are evaluated. The thesis is composed of three papers. The first paper presents a detailed description of the model and an analysis of the case of Colombia and Ecuador. It shows that market coupling can bring important benefits, but the relative size of the countries can lead to import dependency issues in the smaller country. The second paper compares the case of Colombia and Ecuador with the case of Great Britain and France. These countries are significantly different in terms of electricity sources, hydro- storage capacity, complementarity and demand growth. We show that complementarity is essential in order to obtain benefits from integration, while higher demand growth and hydro- storage capacity can lead to counterintuitive outcomes, thus complicating policy design. In the third paper, an extended version of the model presented in the first paper is used to analyse the case of Finland and its interconnection with Russia. Different trading arrangements are considered. We conclude that unless interconnection capacity is expanded, the current trading arrangement, where a single trader owns the transmission rights and limits the flow during peak hours, is beneficial for Finland. In case of interconnection expansion, market coupling would be preferable. We also show that the costs of maintaining a strategic reserve in Finland are justified in order to limit import dependency, while still reaping the benefits of interconnection. In general, we conclude that electricity market integration can bring benefits if the right policies are implemented. However, a large interconnection capacity is only desirable if the countries exhibit significant complementarity and trust each other. The outcomes of policies aimed at guaranteeing security of supply at a national level can be quite counterintuitive due to the interactions between neighbouring countries and their effects on interconnection and generation investments. Thus, it is important for regulators to understand these interactions and coordinate their decisions in order to take advantage of the interconnection without putting security of supply at risk. But it must be taken into account that even when integration brings benefits to the region, some market participants lose and might try to hinder the integration process. -- Dans les sociétés modernes, l'électricité est un service stratégique. Il est donc extrêmement important pour les gouvernements de pouvoir garantir la sécurité d'approvisionnement à des prix abordables. Ceci dépend en grande mesure d'une expansion adéquate des capacités de génération et de transmission. L'intégration des marchés électriques pose des nouveaux défis pour les régulateurs, puisque l'évolution du marché est maintenant influencée par les caractéristiques et les politiques des pays voisins. Il n'est pas encore claire pourquoi ni comment les marches électriques devraient s'intégrer. L'objectif de cette thèse est d'améliorer la compréhension des marchés intégrés d'électricité et de leur comportement en fonction des caractéristiques et politiques de chaque pays. Un modèle de simulation est proposé pour étudier les conditions dans lesquelles l'intégration est désirable. Ce modèle est utilisé pour étudier trois cas d'interconnexion entre deux pays. Plusieurs politiques concernant l'expansion et l'opération de l'interconnexion, combinées avec différents mécanismes de rémunération de la capacité, sont évalués. Cette thèse est compose de trois articles. Le premier présente une description détaillée du modèle et une analyse du cas de la Colombie et de l'Equateur. Il montre que le couplage de marchés peut amener des bénéfices importants ; cependant, la différence de taille entre pays peut créer des soucis de dépendance aux importations pour le pays le plus petit. Le second papier compare le cas de la Colombie et l'Equateur avec le cas de la Grande Bretagne et de la France. Ces pays sont très différents en termes de ressources, taille des réservoirs d'accumulation pour l'hydro, complémentarité et croissance de la demande. Nos résultats montrent que la complémentarité joue un rôle essentiel dans l'obtention des bénéfices potentiels de l'intégration, alors qu'un taux élevé de croissance de la demande, ainsi qu'une grande capacité de stockage, mènent à des résultats contre-intuitifs, ce qui complique les décisions des régulateurs. Dans le troisième article, une extension du modèle présenté dans le premier article est utilisée pour analyser le cas de la Finlande et de la Russie. Différentes règles pour les échanges internationaux d'électricité sont considérées. Nos résultats indiquent qu'à un faible niveau d'interconnexion, la situation actuelle, où un marchand unique possède les droits de transmission et limite le flux pendant les heures de pointe, est bénéfique pour la Finlande. Cependant, en cas d'expansion de la capacité d'interconnexion, «market coupling» est préférable. préférable. Dans tous les cas, la Finlande a intérêt à garder une réserve stratégique, car même si cette politique entraine des coûts, elle lui permet de profiter des avantages de l'intégration tout en limitant ca dépendance envers les importations. En général, nous concluons que si les politiques adéquates sont implémentées, l'intégration des marchés électriques peut amener des bénéfices. Cependant, une grande capacité d'interconnexion n'est désirable que si les pays ont une complémentarité importante et il existe une confiance mutuelle. Les résultats des politiques qui cherchent à préserver la sécurité d'approvisionnement au niveau national peuvent être très contre-intuitifs, étant données les interactions entre les pays voisins et leurs effets sur les investissements en génération et en interconnexion. Il est donc très important pour les régulateurs de comprendre ces interactions et de coordonner décisions à fin de pouvoir profiter de l'interconnexion sans mettre en danger la sécurité d'approvisionnement. Mais il faut être conscients que même quand l'intégration amène de bénéfices pour la région, certains participants au marché sont perdants et pourraient essayer de bloquer le processus d'intégration.

Intrinsic ROS-production capacity of nanoparticles

Engineered nanomaterials (ENMs) exhibit special physicochemical properties and thus are finding their way into an increasing number of industries, enabling products with improved properties. Their increased use brings a greater likelihood of exposure to the nanoparticles (NPs) that could be released during the life cycle of nano-abled products. The field of nanotoxicology has emerged as a consequence of the development of these novel materials, and it has gained ever more attention due to the urgent need to gather information on exposure to them and to understand the potential hazards they engender. However, current studies on nanotoxicity tend to focus on pristine ENMs, and they use these toxicity results to generalize risk assessments on human exposure to NPs. ENMs released into the environment can interact with their surroundings, change characteristics and exhibit toxicity effects distinct from those of pristine ENMs. Furthermore, NPs' large surface areas provide extra-large potential interfaces, thus promoting more significant interactions between NPs and other co-existing species. In such processes, other species can attach to a NP's surface and modify its surface functionality, in addition to the toxicity in normally exhibits. One particular occupational health scenario involves NPs and low-volatile organic compounds (LVOC), a common type of pollutant existing around many potential sources of NPs. LVOC can coat a NP's surface and then dominate its toxicity. One important mechanism in nanotoxicology is the creation of reactive oxygen species (ROS) on a NP's surface; LVOC can modify the production of these ROS. In summary, nanotoxicity research should not be limited to the toxicity of pristine NPs, nor use their toxicity to evaluate the health effects of exposure to environmental NPs. Instead, the interactions which NPs have with other environmental species should also be considered and researched. The potential health effects of exposure to NPs should be derived from these real world NPs with characteristics modified by the environment and their distinct toxicity. Failure to suitably address toxicity results could lead to an inappropriate treatment of nano- release, affect the environment and public health and put a blemish on the development of sustainable nanotechnologies as a whole. The main objective of this thesis is to demonstrate a process for coating NP surfaces with LVOC using a well-controlled laboratory design and, with regard to these NPs' capacity to generate ROS, explore the consequences of changing particle toxicity. The dynamic coating system developed yielded stable and replicable coating performance, simulating an important realistic scenario. Clear changes in the size distribution of airborne NPs were observed using a scanning mobility particle sizer, were confirmed using both liquid nanotracking analyses and transmission electron microscopy (TEM) imaging, and were verified thanks to the LVOC coating. Coating thicknesses corresponded to the amount of coating material used and were controlled using the parameters of the LVOC generator. The capacity of pristine silver NPs (Ag NPs) to generate ROS was reduced when they were given a passive coating of inert paraffin: this coating blocked the reactive zones on the particle surfaces. In contrast, a coating of active reduced-anthraquinone contributed to redox reactions and generated ROS itself, despite the fact that ROS generation due to oxidation by Ag NPs themselves was quenched. Further objectives of this thesis included development of ROS methodology and the analysis of ROS case studies. Since the capacity of NPs to create ROS is an important effect in nanotoxicity, we attempted to refine and standardize the use of 2'7-dichlorodihydrofluorescin (DCFH) as a chemical tailored for the characterization of NPs' capacity for ROS generation. Previous studies had reported a wide variety of results, which were due to a number of insufficiently well controlled factors. We therefore cross-compared chemicals and concentrations, explored ways of dispersing NP samples in liquid solutions, identified sources of contradictions in the literature and investigated ways of reducing artificial results. The most robust results were obtained by sonicating an optimal sample of NPs in a DCFH-HRP solution made of 5,M DCFH and 0.5 unit/ml horseradish peroxidase (HRP). Our findings explained how the major reasons for previously conflicting results were the different experimental approaches used and the potential artifacts appearing when using high sample concentrations. Applying our advanced DCFH protocol with other physicochemical characterizations and biological analyses, we conducted several case studies, characterizing aerosols and NP samples. Exposure to aged brake wear dust engenders a risk of potential deleterious health effects in occupational scenarios. We performed microscopy and elemental analyses, as well as ROS measurements, with acellular and cellular DCFH assays. TEM images revealed samples to be heterogeneous mixtures with few particles in the nano-scale. Metallic and non-metallic elements were identified, primarily iron, carbon and oxygen. Moderate amounts of ROS were detected in the cell-free fluorescent tests; however, exposed cells were not dramatically activated. In addition to their highly aged state due to oxidation, the reason aged brake wear samples caused less oxidative stress than fresh brake wear samples may be because of their larger size and thus smaller relative reactive surface area. Other case studies involving welding fumes and differently charged NPs confirmed the performance of our DCFH assay and found ROS generation linked to varying characteristics, especially the surface functionality of the samples. Les nanomatériaux manufacturés (ENM) présentent des propriétés physico-chimiques particulières et ont donc trouvés des applications dans un nombre croissant de secteurs, permettant de réaliser des produits ayant des propriétés améliorées. Leur utilisation accrue engendre un plus grand risque pour les êtres humains d'être exposés à des nanoparticules (NP) qui sont libérées au long de leur cycle de vie. En conséquence, la nanotoxicologie a émergé et gagné de plus en plus d'attention dû à la nécessité de recueillir les renseignements nécessaires sur l'exposition et les risques associés à ces nouveaux matériaux. Cependant, les études actuelles sur la nanotoxicité ont tendance à se concentrer sur les ENM et utiliser ces résultats toxicologiques pour généraliser l'évaluation des risques sur l'exposition humaine aux NP. Les ENM libérés dans l'environnement peuvent interagir avec l'environnement, changeant leurs caractéristiques, et montrer des effets de toxicité distincts par rapport aux ENM originaux. Par ailleurs, la grande surface des NP fournit une grande interface avec l'extérieur, favorisant les interactions entre les NP et les autres espèces présentes. Dans ce processus, d'autres espèces peuvent s'attacher à la surface des NP et modifier leur fonctionnalité de surface ainsi que leur toxicité. Un scénario d'exposition professionnel particulier implique à la fois des NP et des composés organiques peu volatils (LVOC), un type commun de polluant associé à de nombreuses sources de NP. Les LVOC peuvent se déposer sur la surface des NP et donc dominer la toxicité globale de la particule. Un mécanisme important en nanotoxicologie est la création d'espèces réactives d'oxygène (ROS) sur la surface des particules, et les LVOC peuvent modifier cette production de ROS. En résumé, la recherche en nanotoxicité ne devrait pas être limitée à la toxicité des ENM originaux, ni utiliser leur toxicité pour évaluer les effets sur la santé de l'exposition aux NP de l'environnement; mais les interactions que les NP ont avec d'autres espèces environnementales doivent être envisagées et étudiées. Les effets possibles sur la santé de l'exposition aux NP devraient être dérivés de ces NP aux caractéristiques modifiées et à la toxicité distincte. L'utilisation de résultats de toxicité inappropriés peut conduire à une mauvaise prise en charge de l'exposition aux NP, de détériorer l'environnement et la santé publique et d'entraver le développement durable des industries de la nanotechnologie dans leur ensemble. L'objectif principal de cette thèse est de démontrer le processus de déposition des LVOC sur la surface des NP en utilisant un environnement de laboratoire bien contrôlé et d'explorer les conséquences du changement de toxicité des particules sur leur capacité à générer des ROS. Le système de déposition dynamique développé a abouti à des performances de revêtement stables et reproductibles, en simulant des scénarios réalistes importants. Des changements clairs dans la distribution de taille des NP en suspension ont été observés par spectrométrie de mobilité électrique des particules, confirmé à la fois par la méthode dite liquid nanotracking analysis et par microscopie électronique à transmission (MET), et a été vérifié comme provenant du revêtement par LVOC. La correspondance entre l'épaisseur de revêtement et la quantité de matériau de revêtement disponible a été démontré et a pu être contrôlé par les paramètres du générateur de LVOC. La génération de ROS dû aux NP d'argent (Ag NP) a été diminuée par un revêtement passif de paraffine inerte bloquant les zones réactives à la surface des particules. Au contraire, le revêtement actif d'anthraquinone réduit a contribué aux réactions redox et a généré des ROS, même lorsque la production de ROS par oxydation des Ag NP avec l'oxygène a été désactivé. Les objectifs associés comprennent le développement de la méthodologie et des études de cas spécifique aux ROS. Etant donné que la capacité des NP à générer des ROS contribue grandement à la nanotoxicité, nous avons tenté de définir un standard pour l'utilisation de 27- dichlorodihydrofluorescine (DCFH) adapté pour caractériser la génération de ROS par les NP. Des etudes antérieures ont rapporté une grande variété de résultats différents, ce qui était dû à un contrôle insuffisant des plusieurs facteurs. Nous avons donc comparé les produits chimiques et les concentrations utilisés, exploré les moyens de dispersion des échantillons HP en solution liquide, investigué les sources de conflits identifiées dans les littératures et étudié les moyens de réduire les résultats artificiels. De très bon résultats ont été obtenus par sonication d'une quantité optimale d'échantillons de NP en solution dans du DCFH-HRP, fait de 5 nM de DCFH et de 0,5 unité/ml de Peroxydase de raifort (HRP). Notre étude a démontré que les principales raisons causant les conflits entre les études précédemment conduites dans la littérature étaient dues aux différentes approches expérimentales et à des artefacts potentiels dus à des concentrations élevées de NP dans les échantillons. Utilisant notre protocole DCFH avancé avec d'autres caractérisations physico-chimiques et analyses biologiques, nous avons mené plusieurs études de cas, caractérisant les échantillons d'aérosols et les NP. La vielle poussière de frein en particulier présente un risque élevé d'exposition dans les scénarios professionnels, avec des effets potentiels néfastes sur la santé. Nous avons effectué des analyses d'éléments et de microscopie ainsi que la mesure de ROS avec DCFH cellulaire et acellulaire. Les résultats de MET ont révélé que les échantillons se présentent sous la forme de mélanges de particules hétérogènes, desquels une faible proportion se trouve dans l'échelle nano. Des éléments métalliques et non métalliques ont été identifiés, principalement du fer, du carbone et de l'oxygène. Une quantité modérée de ROS a été détectée dans le test fluorescent acellulaire; cependant les cellules exposées n'ont pas été très fortement activées. La raison pour laquelle les échantillons de vielle poussière de frein causent un stress oxydatif inférieur par rapport à la poussière de frein nouvelle peut-être à cause de leur plus grande taille engendrant une surface réactive proportionnellement plus petite, ainsi que leur état d'oxydation avancé diminuant la réactivité. D'autres études de cas sur les fumées de soudage et sur des NP différemment chargées ont confirmé la performance de notre test DCFH et ont trouvé que la génération de ROS est liée à certaines caractéristiques, notamment la fonctionnalité de surface des échantillons.