Evidence evaluation in fingerprint comparison and automated fingerprint identification systems: modeling between finger variability

In the context of the investigation of the use of automated fingerprint identification systems (AFIS) for the evaluation of fingerprint evidence, the current study presents investigations into the variability of scores from an AFIS system when fingermarks from a known donor are compared to fingerprints that are not from the same source. The ultimate goal is to propose a model, based on likelihood ratios, which allows the evaluation of mark-to-print comparisons. In particular, this model, through its use of AFIS technology, benefits from the possibility of using a large amount of data, as well as from an already built-in proximity measure, the AFIS score. More precisely, the numerator of the LR is obtained from scores issued from comparisons between impressions from the same source and showing the same minutia configuration. The denominator of the LR is obtained by extracting scores from comparisons of the questioned mark with a database of non-matching sources. This paper focuses solely on the assignment of the denominator of the LR. We refer to it by the generic term of between-finger variability. The issues addressed in this paper in relation to between-finger variability are the required sample size, the influence of the finger number and general pattern, as well as that of the number of minutiae included and their configuration on a given finger. Results show that reliable estimation of between-finger variability is feasible with 10,000 scores. These scores should come from the appropriate finger number/general pattern combination as defined by the mark. Furthermore, strategies of obtaining between-finger variability when these elements cannot be conclusively seen on the mark (and its position with respect to other marks for finger number) have been presented. These results immediately allow case-by-case estimation of the between-finger variability in an operational setting.

Production of new polymeric compounds in plants.

Plant metabolic engineering has recently enabled the synthesis of a range of polyhydroxyalkanoates as well as a protein-based polymer. These novel compounds can be harvested from plants as a renewable source of environmentally friendly polymers or can be used to change the physical properties of plant products, such as fibres.

Impact of thermal proofing of a church on its indoor air-quality - The combustion of candles and incense as a source of pollution

Some years ago, a parish in Geneva decided to reduce heating costs by insulating its church to make it more energy efficient. Three years after the last renovations, it was observed that the internal surfaces of the naves had already become dusty compared with the customary frequency of 10-12 years. Dust even deposited on various surfaces during religious services. Our investigation showed that nearly all the dust found inside the church may in fact be soot from incense and candle combustion. Incense appears to be a significant source of polycyclic aromatic hydrocarbons. With a mechanical ventilation system and petrol lamps resembling candles the problem can be resolved.

Topics in public finance: social security and taxation

Summary The field of public finance focuses on the spending and taxing activities of governments and their influence on the allocation of resources and distribution of income. This work covers in three parts different topics related to public finance which are currently widely discussed in media and politics. The first two parts deal with issues on social security, which is in general one of the biggest spending shares of governments. The third part looks at the main income source of governments by analyzing the perceived value of tax competition. Part one deals with the current problem of increased early retirement by focusing on Switzerland as a special case. Early retirement is predominantly considered to be the result of incentives set by social security and the tax system. But the Swiss example demonstrates that the incidence of early retirement has dramatically increased even in the absence of institutional changes. We argue that the wealth effect also plays an important role in the retirement decision for middle and high income earners. An actuarially fair, but mandatory funded system with a relatively high replacement rate may thus contribute to a low labor market participation rate of elderly workers. We provide evidence using a unique dataset on individual retirement decisions in Swiss pension funds, allowing us to perfectly control for pension scheme details. Our findings suggest that affordability is a key determinant in the retirement decisions. The higher the accumulated pension capital, the earlier men, and to a smaller extent women, tend to leave the workforce. The fact that early retirement has become much more prevalent in the last 15 years is a further indicator of the importance of a wealth effect, as the maturing of the Swiss mandatory funded pension system over that period has led to an increase in the effective replacement rates for middle and high income earners. Part two covers the theoretical side of social security. Theories analyzing optimal social security benefits provide important qualitative results, by mainly using one general type of an economy. Economies are however very diverse concerning numerous aspects, one of the most important being the wealth level. This can lead to significant quantitative benefit differences that imply differences in replacement rates and levels of labor supply. We focus on several aspects related to this fact. In a within cohort social security model, we introduce disability insurance with an imperfect screening mechanism. We then vary the wealth level of the model economy and analyze how the optimal social security benefit structure or equivalently, the optimal replacement rates, changes depending on the wealth level of the economy, and if the introduction of disability insurance into a social security system is preferable for all economies. Second, the screening mechanism of disability insurance and the threshold level at which people are defined as disabled can differ. For economies with different wealth levels, we determine for different thresholds the screening level that maximizes social welfare. Finally, part three turns to the income of governments, by adding an element to the controversy on tax competition versus tax harmonization.2 Inter-jurisdictional tax competition can generate at least two potential benefits or costs: On a public level, tax competition may result in a lower or higher efficiency in the production of public services. But there is also a more private benefit in the form of an option for individuals to move to a community with a lower tax rate in the future. To explore the value citizens attach to tax competition we analyze a unique popular vote for a complete tax harmonization between communities in the third largest Swiss canton, Vaud. Although a majority of voters would have seemingly benefited from replacing the current tax rate by a revenue-neutral average tax rate, the proposal was rejected by a large margin. Our estimates suggest that the estimated combined perceived benefit from tax competition is in the range of 10%.

Fungal co-culture as a new source of antifungal metabolites

Background: Over the last two decades, mortality from coronary heart disease (CHD) and cerebrovascular disease (CVD) declined by about 30% in the European Union (EU). Design: We analyzed trends in CHD (X ICD codes: I20-I25) and CVD (X ICD codes: I60-I69) mortality in young adults (age 35-44 years) in the EU as a whole and in 12 selected European countries, over the period 1980-2007. Methods: Data were derived from the World Health Organization mortality database. With joinpoint regression analysis, we identified significant changes in trends and estimated average annual percent changes (AAPC). Results: CHD mortality rates at ages 35-44 years have decreased in both sexes since the 1980s for most countries, except for Russia (130/100,000 men and 24/100,000 women, in 2005-7). The lowest rates (around 9/100,000 men, 2/100,000 women) were in France, Italy and Sweden. In men, the steepest declines in mortality were in the Czech Republic (AAPC = -6.1%), the Netherlands (-5.2%), Poland (-4.5%), and England and Wales (-4.5%). Patterns were similar in women, though with appreciably lower rates. The AAPC in the EU was -3.3% for men (rate = 16.6/100,000 in 2005-7) and -2.1% for women (rate = 3.5/100,000). For CVD, Russian rates in 2005-7 were 40/100,000 men and 16/100,000 women, 5 to 10-fold higher than in most western European countries. The steepest declines were in the Czech Republic and Italy for men, in Sweden and the Czech Republic for women. The AAPC in the EU was -2.5% in both sexes, with steeper declines after the mid-late 1990s (rates = 6.4/100,000 men and 4.3/100,000 women in 2005-7). Conclusions: CHD and CVD mortality steadily declined in Europe, except in Russia, whose rates were 10 to 15-fold higher than those of France, Italy or Sweden. Hungary and Poland, and also Scotland, where CHD trends were less favourable than in other western European countries, also emerge as priorities for preventive interventions.

Mate and fuse: how yeast cells do it.

Many cells are able to orient themselves in a non-uniform environment by responding to localized cues. This leads to a polarized cellular response, where the cell can either grow or move towards the cue source. Fungal haploid cells secrete pheromones to signal mating, and respond by growing a mating projection towards a potential mate. Upon contact of the two partner cells, these fuse to form a diploid zygote. In this review, we present our current knowledge on the processes of mating signalling, pheromone-dependent polarized growth and cell fusion in Saccharomyces cerevisiae and Schizosaccharomyces pombe, two highly divergent ascomycete yeast models. While the global architecture of the mating response is very similar between these two species, they differ significantly both in their mating physiologies and in the molecular connections between pheromone perception and downstream responses. The use of both yeast models helps enlighten both conserved solutions and species-specific adaptations to a general biological problem.

Current cytogenetic map of the common shrew, Sorex araneus L.: localization of 7 genes and 4 microsatellites

Here we present information on the assignment of 7 genes, ACADVL, ADORA3, ATP7A, MTMR4, MYH2, HBB, TSPAN-3, and 4 common shrew microsatellites to chromosomes of the common shrew (Sorex araneus) and on the current status of its cytogenetic map. Comparative mapping data were used for the analysis of evolutionary chromosomal rearrangements in the common shrew genome.

The connectome mapper: an open-source processing pipeline to map connectomes with MRI.

Researchers working in the field of global connectivity analysis using diffusion magnetic resonance imaging (MRI) can count on a wide selection of software packages for processing their data, with methods ranging from the reconstruction of the local intra-voxel axonal structure to the estimation of the trajectories of the underlying fibre tracts. However, each package is generally task-specific and uses its own conventions and file formats. In this article we present the Connectome Mapper, a software pipeline aimed at helping researchers through the tedious process of organising, processing and analysing diffusion MRI data to perform global brain connectivity analyses. Our pipeline is written in Python and is freely available as open-source at www.cmtk.org.

Coulier, Paul-Jean (1824-1890) : a precursor in the history of fingermark detection and their potential use for identifying their source (1863)

An online copy of a 1863 French book, The Scientific and Industrial Year (English translation of the title), that predates other historically significant writings about fingerprints suggests the use of iodine stains to reproduce papillary lines of the skin and suggests the feasibility of identifying suspects by touch. It also suggests the use of a magnifying glass for comparing those impressions whose origins need to be determined.

3-d residual eddy current field characterisation: applied to diffusion weighted magnetic resonance imaging.

Clinical use of the Stejskal-Tanner diffusion weighted images is hampered by the geometric distortions that result from the large residual 3-D eddy current field induced. In this work, we aimed to predict, using linear response theory, the residual 3-D eddy current field required for geometric distortion correction based on phantom eddy current field measurements. The predicted 3-D eddy current field induced by the diffusion-weighting gradients was able to reduce the root mean square error of the residual eddy current field to ~1 Hz. The model's performance was tested on diffusion weighted images of four normal volunteers, following distortion correction, the quality of the Stejskal-Tanner diffusion-weighted images was found to have comparable quality to image registration based corrections (FSL) at low b-values. Unlike registration techniques the correction was not hindered by low SNR at high b-values, and results in improved image quality relative to FSL. Characterization of the 3-D eddy current field with linear response theory enables the prediction of the 3-D eddy current field required to correct eddy current induced geometric distortions for a wide range of clinical and high b-value protocols.