Intrachannel versus interchannel application of angiogenic factors in transmyocardial laser revascularization.

BACKGROUND AND OBJECTIVE: Theoretically myocardial angiogenesis of laser injury can be further enhanced by the addition of angiogenic growth factors. The influence of the way of administration of these factors on vascular growth around the channels is still unclear. MATERIALS AND METHODS: 18 pigs (mean weight 72 +/- 5.2 kg) were randomized to either triads of transmyocardial laser revascularization (TMLR) channels (group 1, n = 6) or isolated channels (group 2, n = 6), or a control group (n = 6). The animals had injections of bovine bone derived growth factor mixture either in the center of the triads in group 1 or within the channels themselves in group 2. Animals were sacrificed one month later for histological analysis. RESULTS: The vascular densities of myocardial areas within the triads of group 1 and around the channels in group 2 were significantly larger than in the control group: 15.2 +/- 3.7/mm2 and 14.2 +/- 3.5/mm2 respectively vs 5.3 +/- 1.6/mm2 (p < 0.001 for both differences). Differences of densities between group 1 and 2 were not statistically significant (p = 0.6). CONCLUSIONS: In this porcine model, the addition of a bovine bone derived growth factor mixture to TMLR significantly stimulates angiogenesis in the areas adjacent to the channels. The place of injection does not influence the angiogenesis intensity.

Intérêt du monitorage du CO2 expiré pour évaluer la PaCO2 lors d'insuffisance respiratoire aiguë hypercapnique traitée par ventilation non invasive.

Introduction: L'efficacité d'une séance de VNI est habituellement évaluée selon la réponse clinique, l'amélioration de l'acidose respiratoire et de l'hypercapnie. Le but de cette étude était d'évaluer l'intérêt de la mesure du CO2 en fin d'expiration (PETCO2) pour estimer la PaCO2 et son évolution dans le temps. Patients et Méthodes: Des patients de réanimation souffrant d'une insuffisance respiratoire aiguë hypercapnique (PaCO2 >45 mmHg) ont été inclus dans cette étude prospective. La PETCO2était mesurée à l'aide d'un capteur nasobuccal (SmartLine®, Oridion) au cours d'une séance de VNI de 60 minutes. Une gazométrie artérielle et la valeur de PETCO2 étaient enregistrées au début de la séance puis chaque 15 minutes. Des manoeuvres d'expiration complète passives et actives étaient effectuées à 30 et 60 minutes. Le gradient de CO2 (PaCO2- PETCO2) a été calculé pour l'ensemble des mesures, spécifiquement pour chaque manoeuvre d'expiration complète, ainsi qu'individuellement pour chaque patient. Ces grandeurs sont exprimées en moyenne et écart-type pour évaluer le biais et la dispersion observés entre PaCO2 et PETCO2. La différence entre chaque valeurs consécutives de gradient de CO2 (delta gradient de CO2) a été calculées par patient. Cette mesure quantifie la variation au cours du temps du gradient de CO2 pour un patient donné. Résultats: 11 patients ont été inclus (7 BPCO, 1 restrictif et 1 syndrome d'apnée du sommeil). Sur l'ensemble des mesures, le gradient de CO2 était de 14.7 + 10.6 mmHg, lors des manoeuvres d'expiration complètes active il était de 8.1 + 13.0 mmHg, et de 8.8 + 11.9 mmHg lors des expirations passives. Conclusion: Chez les patients présentant une insuffisance respiratoire aiguë hypercanique traitée par VNI, la mesure de la PETCO2 par capteur nasobuccal ne permet de prédire ni la valeur de PaCO2, ni son évolution dans le temps. Les manoeuvres d'expiration complète n'apportent aucune plus value.

Moving from a Mechanical Microkeratome to a Femtosecond Laser for LASIK to Correct Astigmatic Patients: Clinical Outcomes of a Retrospective, Consecutive, Comparative Study.

Background: To evaluate outcomes after optimized laser in situ keratomileusis (LASIK) for astigmatism correction with flap created by a mechanical microkeratome or a femtosecond laser. Patients and Methods: In this retrospective study, a total of 102 eyes of 71 consecutive patients were enrolled undergoing optimized LASIK treatments using the Allegretto laser system (WaveLight Laser Technologie AG, Erlangen, Germany). A mechanical microkeratome for flap creation was used (One Use, Moria®) in 46 eyes (31 patients, spherical equivalent [SE] -4.44 D ± 2.4) and a femtosecond laser was used (LDV, Ziemer®) in 56 eyes (40 patients, spherical equivalent [SE] -3.07 D ± 3.3). The two groups were matched for inclusion criteria and were operated under similar conditions by the same surgeon. Results: Overall, the preoperative spherical equivalent was -9.5 diopters (D) to +3.37 D; the preoperative manifest astigmatism was between -1.5 D and -3.5 D. At 6 months postoperatively, the mean postoperative uncorrected distance visual acuity (UDVA) was 0.93 ± 0.17 (range 0.4 to 1.2) in the Moria group and 1.0 ± 0.21 (range 0.6 to 1.6) in the Femto group, which was statistically significant (p = 0.003). Comparing the cylinder power there was a statistical difference between the two groups (p = 0.0015). Conclusions: This study shows that the method of flap creation has a significant impact on postoperative astigmatism with a significantly better postoperative UDVA in the Femto group. These findings suggest that the femtosecond laser provides a better platform for LASIK treatment of astigmatism than the commonly used microkeratome.

Elemental and isotopic zoning in natural alpine quartz

THESIS ABSTRACT : Stable isotope geochemistry is used to help resolve a large number of geological questions. In order to do this, it is essential to understand the different mechanisms that govern isotopic fractionation processes between different phases and to identify the conditions required to reach equilibrium fractionation. However, at low temperatures, these processes are poorly constrained and many factors can induce differential partitioning of the isotopes between sectors of a mineral species and the fluid during mineral growth. This can result in so-called 'sector zoning' of a mineral species. The aim of this thesis is to evaluate the occurrence of sector zoning of the oxygen isotopes and trace elements in natural α-quartz crystals and to identify the reasons for such zoning. The implications for the fluid-mineral interactions are studied in the context of the Alpine metamorphism. The approach chosen has focused on examining the crystal structure, cathodoluminescence appearance (CL), and on relating elemental (e.g. Li, Na, Al, P, K, Ca, Ge, Ti, Fe) to stable oxygen isotope compositions between and along different growth sectors. Low temperature quartz samples were selected from Alpine veins in different localities, where growth conditions have already been well constrained. The mineralogy as well as the isotopic compositions of the host rocks were also investigated, in order to interpret the variations obtained between the different growth stages in the framework of fluid-rock interaction during Alpine metamorphism. Depending on the growth conditions, most of the studied quartz is strongly zoned in CL, and it reveals corresponding zonations in the trace element content (e.g. growth zoning). Aluminium, substituting for Si in the lattice, was found in concentrations up to 1000's ppma, and its distribution is strongly related to Li and H and to a lesser extent, to Ge. Elemental sector zoning is evident from the distribution of these three elements since they exhibit differences in their respective concentrations between faces for distinct growth zones, with prismatic faces having the lowest Al contents. Quartz from veins in magmatic rocks, for example, tend to have lower Al concentrations and similar concentrations of Li and Ti suggesting also a contribution of these elements from the host rock. The relationship between Al and Li is still correlated. Only Alpine crystals grown at higher temperatures (~400°C) without any CL zoning feature are free of these impurities and do not show such zoning characteristics. Differences in the δ18O values were measured between different faces principally in the AIenriched growth zones or stages. These results were confirmed by the means of two different methods (in situ/non in situ). However, it was determined that the Al concentrations do not affect significantly oxygen isotope fractionations at 300°C. The results altogether suggest that the presence of sector zoning in quartz crystals is real, but not universal, and henceforth should be taken into consideration for any use of these systems. The occurrence of disequilibrium partitioning has been enhanced and is possibly related to kinetic processes as well as structural effects that do not affect similarly trace element incorporation and isotopic fractionation. In situ measurements also revealed fine scale δ18O zonations along growth paths that are useful to constrain fluid-rock interactions during Alpine metamorphism. Variations in the δ18O values present along growth vectors indicate changes in the fluid composition and origin. Association with oxygen isotope composition of the host rock allows for the deduction of interactions between rocks, veins and consequently fluids, as well as fluid regimes. RESUME DE LA THESE : A basses températures, (i.e. <400°C) les différents mécanismes qui régissent le fractionnement isotopique ainsi que les conditions nécessaires pour établir un état d'équilibre sont peu connus et nombre de paramètres peuvent entraîner un partitionnement chimique différentiel entre différents secteurs d'un minéral et le fluide en contact. Ainsi, ce travail de thèse a pour but d'évaluer la possible présence de zonages sectoriels en isotopes de l'oxygène mais aussi en éléments traces dans des cristaux naturels de quartz-α de basses températures, ainsi que les raisons d'un tel phénomène et enfin ses implications sur les interactions fluide-roche, principalement dans le cadre du métamorphisme Alpin. La structure et l'apparence en cathodoluminescence (CL) des échantillons ont été caractérisées avant de retracer en détail les compositions en élément traces (Li, Na, Al, P, K, Ca, Ge, Ti, Fe) et en isotopes de l'oxygène, le long et entre différents secteurs. Les échantillons de quartz sélectionnés proviennent majoritairement de veines Alpine de différentes localités, où les conditions de croissance ont été déjà bien caractérisées. Les compositions minéralogiques et isotopiques de la roche encaissante ont aussi été examinées, pour contraindre les variations obtenues dans un contexte Alpin. Selon leurs conditions de croissance, la plupart des cristaux étudiés sont fortement zonés, ce qui est souligné par un zonage des concentrations en éléments traces (e.g. zonage de croissance). L'Aluminium, qui peut se substituer à la Silice dans le réseau cristallin, a été retrouvé jusqu'en très grandes concentrations dans certaines zones (plusieurs milliers de ppma). De plus, la distribution en Al est fortement liée à celles de Li et H, ainsi que dans une moindre mesure à Ge. La présence de zonage sectoriel est évidente au niveau de ces éléments qui montrent de larges différences de concentrations entre différentes faces pour une même zone de croissance, avec les concentrations les plus basses retrouvées dans les faces prismatiques. Les quartz de veines situées dans des roches magmatiques par exemple possèdent des concentrations en Li et Ti de même ordre de grandeur, confirmant le rôle de la composition de la roche encaissante. La relation Li/Al est toujours fortement présente, mais ce rapport est fonction de la face mesurée. Seuls les cristaux Alpins de plus hautes températures (400°C) ne possédant pas de zones en CL ne présentent aucune de ces caractéristiques. Des différences dans les valeurs de δ18O de zones identiques enrichies en Al ont clairement été mesurées entre les différentes faces r, z, et m, mais aussi au sein d'une même seule zone, indiquant que le fractionnement a probablement eu lieu en déséquilibre. Il a été déterminé que la présence d'Al dans ces teneurs n'avait qu'un faible effet sur le fractionnement isotopique de l'oxygène. L'utilisation de deux méthodes différentes a permis d'obtenir des résultats in situ et non in situ concordants. La comparaison des résultats obtenus permet de démontrer que le zonage sectoriel est bien présent dans certains cristaux de quartz, et dépend des conditions de formation. La présence d'un partitionnement différentiel des éléments traces peut être due à des effets cinétiques aussi bien que structuraux, alors que le zonage sectoriel des isotopes de l'oxygène aurait d'autres origines. Il est alors évident que la possibilité de zonage sectoriel doit être désormais pris en considération avant toute interprétations de données isotopiques de cristaux zonés. Les mesures in situ ont de plus permis de distinguer de fines variations des valeurs δ18O au cours de la croissance, qui peuvent aider à retracer la circulations des fluides dans les Alpes durant cette période. En association avec les compositions des roches encaissantes, ii est possible de déduire les interactions entre roches, veines, et par conséquent fluides, au cours de différentes étapes. RESUME GRAND PUBLIC : La géochimie des isotopes stables a pris beaucoup d'importance depuis ces dernières années pour aider à résoudre nombre de questions géologiques, en se basant sur les caractéristiques du fractionnement isotopiques pour différents systèmes. Il est donc nécessaire d'avoir une connaissance approfondie des mécanismes qui s'appliquent au fractionnement isotopique entre les minéraux et les fluides à partir desquels ils se forment. Ces mécanismes ont été bien approchés par différents types de calibrations pour des systèmes à hautes températures, cependant cela n'est pas aussi évident pour les systèmes à des températures inférieures à 400-500°C. Ce travail de thèse a pour but d'aider à la description et la compréhension des phénomènes qui peuvent affecter le fractionnement isotopique à basses températures, ainsi que leurs implications, à partir de l'étude de cristaux de quartz. Le choix des échantillons s'est porté sur des cristaux naturels formés à des températures inférieures ou égales à 400°C, provenant majoritairement de fissures hydrothermales Alpines dont les conditions de formation ont déjà été déterminées. L'étude des cristaux Alpin permet de plus de replacer les résultats obtenus dans le contexte du métamorphisme Alpin au cours du Miocène (21-13 Ma). Après examen de la structure et de la morphologie des cristaux, et leur caractérisation par cathodoluminescence (CL), des analyses chimiques détaillées sur les éléments en traces pouvant entrer dans le réseau cristallin du quartz comme impuretés (i.e. Li, Na, Al, P, K, Ca, Ge, Ti), et des isotopes stables de l'oxygène, ont été menées. En fonction des conditions de croissance, la plupart des cristaux présentent des zonations, qui peuvent être facilement reliées à la distribution des éléments traces analysés par microsonde électronique, sonde ionique (SIMS) et LA-ICPMS. De fortes concentrations d'Aluminium (plusieurs milliers de parties par million atomique) ont pu être observées dans les zones les plus externes des cristaux. De plus, les concentrations en Al et en Li sont toujours corrélées; la présence d'Hydrogène déduite à partir d'analyses par FTIR suit cette même tendance. Les différentes faces des cristaux présentent des concentrations distinctes d'Al, Li et H pour des mêmes zones de croissance, avec par exemple les concentrations les plus faibles dans les zones des faces prismatiques. Cela implique la présence d'un zonage sectoriel, qui a déjà été observé principalement dans des carbonates mais jamais décrit auparavant pour des quartz. Seuls les cristaux alpins homogènes en CL dont la croissance s'est faite à plus haute température (400°C) ne présentent aucune de ces caractéristiques. Par analogie avec le zonage sectoriel en Al, élément qui se substitue au Si dans le réseau cristallin du quartz, il est possible de penser qu'un zonage sectoriel pourrait aussi s'appliquer aux isotopes de l'oxygène. Des précédentes études avaient en effet émis cette hypothèse. Nos résultats ont été obtenus à partir d'analyses à la fois in- situ par SIMS, et par extraction assistée par laser-CO2 sur des parties de quartz soigneusement séparées, et sont en accord entre les deux méthodes. Un zonage sectoriel est en effet bien présent pour les cristaux alpins, mais principalement au niveau des zones très riches en Aluminium. Cependant, il a été déterminé que la présence d'Al dans ces teneurs avait un effet plus que minimal sur le fractionnement isotopique de l'oxygène. Des différences importantes ont été observées entre les faces r & z mais aussi au sein d'une même et seule zone, indiquant que le fractionnement a pu avoir lieu en déséquilibre, ce qui est aussi visible au niveau des valeurs totalement opposées entre faces pour la dernière phase de croissance de certains cristaux. Ainsi l'association de ces résultats laisse suggérer que la présence d'un zonage sectoriel peut être liée à différents paramètres tels que le taux de croissance ou la structure de surface du cristal, mais qui n'affectent pas de la même façon l'incorporation des éléments traces et le fractionnement isotopique. La possibilité d'un zonage sectoriel est importante à prendre en compte lors de toute interprétation de données isotopiques. Les analyses des isotopes de l'oxygène effectuées par SIMS ont aussi permis de distinguer des variations importantes à petite échelle au cours de la croissance. Des mesures faites par laser CO2 sur certaines roches encaissantes, ont permis distinguer plusieurs étapes dans la croissance des minéraux et de déduire le rôle de l'encaissant et le type de fluide. En association avec de précédentes études, il a été ainsi possible de mieux contraindre la formation de ces cristaux dans le contexte alpin et la circulation de fluide au cours du métamorphisme alpin durant le Miocène.

Examination of Heterogeneous Crossing Sequences Between Toner and Rollerball Pen Strokes by Digital Microscopy and 3-D Laser Profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner. With the mass marketing of laser printers and the popularity of rollerball pens, the determination of line crossing sequences between such instruments is encountered by forensic document examiners. This type of crossing presents difficulties with optical microscopic line crossing techniques involving ballpoint pens or gel pens and toner (1-4). Indeed, the rollerball's aqueous ink penetrates through the toner and is absorbed by the fibers of the paper, leaving the examiner with the impression that the toner is above the ink even when it is not (5). Novotny and Westwood (3) investigated the possibility of determining aqueous ink and toner crossing sequences by microscopic observation of the intersection before and after toner removal. A major disadvantage of their study resides in destruction of the sample by scraping off the toner line to see what was underneath. The aim of this research was to investigate the ways to overcome these difficulties through digital microscopy and three-dimensional (3-D) laser profilometry. The former was used as a technique for the determination of sequences between gel pen and toner printing strokes, but provided less conclusive results than that of an optical stereomicroscope (4). 3-D laser profilometry, which allows one to observe and measure the topography of a surface, has been the subject of a number of recent studies in this area. Berx and De Kinder (6) and Schirripa Spagnolo (7,8) have tested the application of laser profilometry to determine the sequence of intersections of several lines. The results obtained in these studies overcome disadvantages of other methods applied in this area, such as scanning electron microscope or the atomic force microscope. The main advantages of 3-D laser profilometry include the ease of implementation of the technique and its nondestructive nature, which does not require sample preparation (8-10). Moreover, the technique is reproducible and presents a high degree of freedom in the vertical axes (up to 1000 μm). However, when the paper surface presents a given roughness, if the pen impressions alter the paper with a depth similar to the roughness of medium, the results are not always conclusive (8). It becomes difficult in this case to distinguish which characteristics can be imputed to the pen impressions or the quality of the paper surface. This important limitation is assessed by testing different types of paper of variable quality (of different grammage and finishing) and the writing pressure. The authors will therefore assess the limits of 3-D laser profilometry technique and determine whether the method can overcome such constraints. Second, the authors will investigate the use of digital microscopy because it presents a number of advantages: it is efficient, user-friendly, and provides an objective evaluation and interpretation.

Non-contact microdrilling of mouse zona pellucida with an objective-delivered 1.48-microns diode laser.

BACKGROUND and OBJECTIVE: A non-touch laser-induced microdrilling procedure is studied on mouse zona pellucida (ZP). STUDY DESIGN/MATERIALS and METHODS: A 1.48-microns diode laser beam is focused in a 8-microns spot through a 45x objective of an inverted microscope. Mouse zygotes, suspended in a culture medium, are microdrilled by exposing their ZP to a short laser irradiation and allowed to develop in vitro. RESULTS: Various sharp-edged holes can be generated in the ZP with a single laser irradiation. Sizes can be varied by changing irradiation time (3-100 ms) or laser power (22-55 mW). Drilled zygotes present no signs of thermal damage under light and scanning electron microscopy and develop as expected in vitro, except for a distinct eight-shaped hatching behavior. CONCLUSION: The microdrilling procedure can generate standardized holes in mouse ZP, without any visible side effects. The hole formation can be explained by a local photothermolysis of the protein matrix.

Traitement au laser des trous maculaires [Laser treatment of macular holes]

OBJECTIVE: To study a new technic of laser treatment of macular holes. METHODS: 21 eyes with stage II-IV macular hole were treated with Argon-green laser. Pigment epithelium in the area of the hole was whitened with spots of 100-200 microns, 100-300 mW. We expected this treatment to create a cellular proliferation that could close and contract the hole. Follow-up after treatment ranged from 3 to 24 months (mean: 9.3 months). RESULTS: Within one month after treatment, the macular hole was closed in 7 eyes (33%) and partially closed in 5 eyes (24%). The visual acuity increased from 1 to 5 lignes (ETDRS chart) in 9 eyes (43%), it remained the same in 9 eyes (43%) and decreased from 1 to 2 lignes in 3 eyes (14%). CONCLUSION: Laser treatment of macular holes seems to be effective and could be proposed as an alternative to the patients who cannot be operated on by vitrectomy and gas tamponade.

Measuring the diurnal pattern of leaf hyponasty and growth in Arabidopsis - a novel phenotyping approach using laser scanning

Plants forming a rosette during their juvenile growth phase, such as Arabidopsis thaliana (L.) Heynh., are able to adjust the size, position and orientation of their leaves. These growth responses are under the control of the plants circadian clock and follow a characteristic diurnal rhythm. For instance, increased leaf elongation and hyponasty - defined here as the increase in leaf elevation angle - can be observed when plants are shaded. Shading can either be caused by a decrease in the fluence rate of photosynthetically active radiation (direct shade) or a decrease in the fluence rate of red compared with far-red radiation (neighbour detection). In this paper we report on a phenotyping approach based on laser scanning to measure the diurnal pattern of leaf hyponasty and increase in rosette size. In short days, leaves showed constitutively increased leaf elevation angles compared with long days, but the overall diurnal pattern and the magnitude of up and downward leaf movement was independent of daylength. Shade treatment led to elevated leaf angles during the first day of application, but did not affect the magnitude of up and downward leaf movement in the following day. Using our phenotyping device, individual plants can be non-invasively monitored during several days under different light conditions. Hence, it represents a proper tool to phenotype light- and circadian clock-mediated growth responses in order to better understand the underlying regulatory genetic network.

Origin of CO2 and carbonate veins in mantle-derived xenoliths in the Pannonian Basin

The origin and evolution of CO2 inclusions and calcite veins in peridotite xenoliths of the Pannonian Basin, Hungary, were investigated by means of petrographic investigation and stable isotope analyses. The fluid inclusions recovered in paragenetic olivine and clinopyroxene belong to distinct populations: type A (texturally early) inclusions with regular shapes (often with negative crystal forms) forming intragranular trails, type B (texturally late) inclusions defining randomly oriented trails that reach grain boundaries Type B inclusions are often associated with silicate melt (type C) inclusions Stable carbon isotope compositions in inclusion-hosted CO2 were obtained by vacuum crushing followed by conventional dual inlet as well as continuous flow mass spectrometry in order to eliminate possible lab artifacts. Olivines, clino- and orthopyroxenes of the host peridotite have oxygen isotope compositions from 5.3 to 6.0 parts per thousand (relative to V-SMOW). without any relationship with xenolith texture. Some of the xenoliths contained calcite in various forms veins and infillings in silicate globules in veins, secondary carbonate veins filling cracks and metasomatic veins with diffuse margins The former two carbonate types have delta C-13 values around -13 parts per thousand (relative to V-PDB) and low Sr contents (<05 wt %), whereas the third type,veins with high-temperature metasomatic features have a delta C-13 value of -5 0 parts per thousand and high Sr contents up to 34 wt.% In spite of the mantle-like delta C-13 value and the unusually high Sr content typical for mantle-derived carbonate, trace element compositions have proven a crustal origin. This observation supports the conclusions of earlier studies that the carbonate melt droplets found on peridotite xenoliths in the alkaline basalts represent mobilized sedimentary carbonate. The large delta C-13 range and the C-12-enrichment in the carbonates can be attributed to devolanlization of the migrating carbonate or infiltration of surficial fluids containing C-12-rich dissolved carbon Carbon isotope compositions of inclusion-hosted CO2 range from -17 8 to -4.8 parts per thousand (relative to V-PDB) with no relation to the amount of CO2 released by vacuum crushing. Low-delta C-13 values measured by stepwise heating under vacuum suggest that the carbon component is pristine and not related to surficial contamination, and that primary mantle fluids with delta C-13 values around -5 parts per thousand were at least partly preserved in the xenoliths Tectonic reworking and heating by the basaltic magma resulted in partial CO2 release and local C-13-depletion. (C) 2010 Elsevier B V All rights reserved

Laser scanning evaluation of atrophy after autologous free muscle transfer.

Denervated muscle tissue undergoes morphologic changes that result in atrophy. The amount of muscle atrophy after denervation following free muscle transfer has not been measured so far. Therefore, the amount of muscle atrophy in human free muscle transfer for lower extremity reconstruction was measured in a series of 10 patients. Three-dimensional laser surface scanning was used to measure flap volume changes 2 weeks as well as 6 and 12 months after the operation. None of the muscles transferred was re-innervated.All muscles healed uneventfully without signs of compromised perfusion resulting in partial flap loss. The muscle volume decreased to 30 ± 4% and 19 ± 4% 6 and 12 months, respectively, after the operation, ie, the volume decreased by approximately 80% within a 12-month period.Denervated free muscle flap tissue undergoes massive atrophy of approximately 80%, mostly within the first 6 months.

The data treatment dependent variability of U-Pb zircon ages obtained using mono-collector, sector field, laser ablation ICP-MS

U-Pb dating of zircons by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) is a widely used analytical technique in Earth Sciences. For U-Pb ages below 1 billion years (1 Ga), Pb-206/U-238 dates are usually used, showing the least bias by external parameters such as the presence of initial lead and its isotopic composition in the analysed mineral. Precision and accuracy of the Pb/U ratio are thus of highest importance in LA-ICPMS geochronology. We consider the evaluation of the statistical distribution of the sweep intensities based on goodness-of-fit tests in order to find a model probability distribution fitting the data to apply an appropriate formulation for the standard deviation. We then discuss three main methods to calculate the Pb/U intensity ratio and its uncertainty in the LA-ICPMS: (1) ratio-of-the-mean intensities method, (2) mean-of-the-intensity-ratios method and (3) intercept method. These methods apply different functions to the same raw intensity vs. time data to calculate the mean Pb/U intensity ratio. Thus, the calculated intensity ratio and its uncertainty depend on the method applied. We demonstrate that the accuracy and, conditionally, the precision of the ratio-of-the-mean intensities method are invariant to the intensity fluctuations and averaging related to the dwell time selection and off-line data transformation (averaging of several sweeps); we present a statistical approach how to calculate the uncertainty of this method for transient signals. We also show that the accuracy of methods (2) and (3) is influenced by the intensity fluctuations and averaging, and the extent of this influence can amount to tens of percentage points; we show that the uncertainty of these methods also depends on how the signal is averaged. Each of the above methods imposes requirements to the instrumentation. The ratio-of-the-mean intensities method is sufficiently accurate provided the laser induced fractionation between the beginning and the end of the signal is kept low and linear. We show, based on a comprehensive series of analyses with different ablation pit sizes, energy densities and repetition rates for a 193 nm ns-ablation system that such a fractionation behaviour requires using a low ablation speed (low energy density and low repetition rate). Overall, we conclude that the ratio-of-the-mean intensities method combined with low sampling rates is the most mathematically accurate among the existing data treatment methods for U-Pb zircon dating by sensitive sector field ICPMS.

Monitoring and failure mechanism interpretation of an unstable slope in Southern Switzerland based on terrestrial laser scanner

We present the application of terrestrial laser scanning (TLS) for the monitoring and characterization of an active landslide area in Val Canaria (Ticino, Southern Swiss Alps). At catchment scale, the study area is affected by a large Deep Seated Gravitational Slope Deformation (DSGSD) area presenting, in the lower boundary, several retrogressive landslides active since the 1990s. Due to its frequent landslide events this area was periodically monitored by TLS since 2006. Periodic acquisitions provided new information on 3D displacements at the bottom of slope and the detection of centimetre to decimetre level scale changes (e.g. rockfall and pre-failure deformations). In October 2009, a major slope collapse occured at the bottom of the most unstable area. Based on the comparison between TLS data before and after the collapse, we carried out a detailed failure mechanism analysis and volume calculation.

Reconditioning of the trabeculo-descemet's membrane with the 532-nm Nd : YAG (SLT) laser after deep sclerectomy.

The purpose of this study was to evaluate the intraocular pressure (IOP)-lowering effect of modified goniopuncture with the 532-nm Nd : YAG selective laser trabeculoplasty (SLT) laser on eyes after deep sclerectomy with collagen implant (DSCI). This was an interventional cased series. The effects of modified goniopuncture on eyes with insufficient IOP-lowering after DSCI were observed. Goniopuncture was performed using a Q-switched, frequency-doubled 532-nm Nd : YAG laser (SLT-goniopuncture, SLT-G). Outcome measures were amount of IOP-lowering and rapidity of decrease after laser intervention. In all, 10 eyes of 10 patients with a mean age of 71.0±7.7 (SD) years were treated with SLT-G. The mean time of SLT-G after DSCI procedure was 7.1±10.9 months. SLT-G decreased IOP from an average of 16.1±3.4 mm Hg to 14.2±2.8 mm Hg (after 15 min), 13.6±3.9 mm Hg (at 1 day), 12.5±4.1 mm Hg (at 1 month), and 12.6±2.5 (at 6 months) (P<0.0125). There were no complications related to the intervention. Patients in this series achieved an average 22.5% of IOP reduction after SLT-G. The use of the SLT laser appears to be an effective and safe alternative to the traditional Nd : YAG laser for goniopuncture in eyes after DSCI, with potential advantages related to non-perforation of trabeculo-descemet's membrane (TDM).