The pulmonary embolism rule-out criteria (PERC) rule does not safely exclude pulmonary embolism.

Background: The Pulmonary Embolism Rule-out Criteria (PERC) rule is a clinical diagnostic rule designed to exclude pulmonary embolism (PE) without further testing. We sought to externally validate the diagnostic performance of the PERC rule alone and combined with clinical probability assessment based on the revised Geneva score. Methods: The PERC rule was applied retrospectively to consecutive patients who presented with a clinical suspicion of PE to six emergency departments, and who were enrolled in a randomized trial of PE diagnosis. Patients who met all eight PERC criteria [PERC(-)] were considered to be at a very low risk for PE. We calculated the prevalence of PE among PERC(-) patients according to their clinical pretest probability of PE. We estimated the negative likelihood ratio of the PERC rule to predict PE. Results: Among 1675 patients, the prevalence of PE was 21.3%. Overall, 13.2% of patients were PERC(-). The prevalence of PE was 5.4% [95% confidence interval (CI): 3.1-9.3%] among PERC(-) patients overall and 6.4% (95% CI: 3.7-10.8%) among those PERC(-) patients with a low clinical pretest probability of PE. The PERC rule had a negative likelihood ratio of 0.70 (95% CI: 0.67-0.73) for predicting PE overall, and 0.63 (95% CI: 0.38-1.06) in low-risk patients. Conclusions: Our results suggest that the PERC rule alone or even when combined with the revised Geneva score cannot safely identify very low risk patients in whom PE can be ruled out without additional testing, at least in populations with a relatively high prevalence of PE.

A generalization of Cope's rule

For numerous shelly invertebrates, Cope's rule is shown in this paper to merely describe the particular case where volume increase is strictly coupled with diameter or length. Allometries, which are frequently observed in the evolution of the shells' geometry, mean that their size, volume and surface can vary independently. The consequences of this can be summarized as follows : 1) volume increase not coupled with an increase of diameter or length of the organisms generates increasing involution and/or lateral width in the shell of cephalopods, foraminifera and radiolarians; 2) an increase of the biomineralizing surface, not coupled with volume increase, generates increasing apparent complexity in the sutures and growth lines in ammonites, and an increase in the complexity and number of chambers in foraminifera.

Development and validation of a clinical prediction rule for chest wall syndrome in primary care.

ABSTRACT: BACKGROUND: Chest wall syndrome (CWS), the main cause of chest pain in primary care practice, is most often an exclusion diagnosis. We developed and evaluated a clinical prediction rule for CWS. METHODS: Data from a multicenter clinical cohort of consecutive primary care patients with chest pain were used (59 general practitioners, 672 patients). A final diagnosis was determined after 12 months of follow-up. We used the literature and bivariate analyses to identify candidate predictors, and multivariate logistic regression was used to develop a clinical prediction rule for CWS. We used data from a German cohort (n = 1212) for external validation. RESULTS: From bivariate analyses, we identified six variables characterizing CWS: thoracic pain (neither retrosternal nor oppressive), stabbing, well localized pain, no history of coronary heart disease, absence of general practitioner's concern, and pain reproducible by palpation. This last variable accounted for 2 points in the clinical prediction rule, the others for 1 point each; the total score ranged from 0 to 7 points. The area under the receiver operating characteristic (ROC) curve was 0.80 (95% confidence interval 0.76-0.83) in the derivation cohort (specificity: 89%; sensitivity: 45%; cut-off set at 6 points). Among all patients presenting CWS (n = 284), 71% (n = 201) had a pain reproducible by palpation and 45% (n = 127) were correctly diagnosed. For a subset (n = 43) of these correctly classified CWS patients, 65 additional investigations (30 electrocardiograms, 16 thoracic radiographies, 10 laboratory tests, eight specialist referrals, one thoracic computed tomography) had been performed to achieve diagnosis. False positives (n = 41) included three patients with stable angina (1.8% of all positives). External validation revealed the ROC curve to be 0.76 (95% confidence interval 0.73-0.79) with a sensitivity of 22% and a specificity of 93%. CONCLUSIONS: This CWS score offers a useful complement to the usual CWS exclusion diagnosing process. Indeed, for the 127 patients presenting CWS and correctly classified by our clinical prediction rule, 65 additional tests and exams could have been avoided. However, the reproduction of chest pain by palpation, the most important characteristic to diagnose CWS, is not pathognomonic.

The social disembedding of business theory and practice. A (neo-)institutional analysis of the homo economicus and corporate social responsibility, and the inherent responsibility of business scholars

Aim Structure of the Thesis In the first article, I focus on the context in which the Homo Economicus was constructed - i.e., the conception of economic actors as fully rational, informed, egocentric, and profit-maximizing. I argue that the Homo Economicus theory was developed in a specific societal context with specific (partly tacit) values and norms. These norms have implicitly influenced the behavior of economic actors and have framed the interpretation of the Homo Economicus. Different factors however have weakened this implicit influence of the broader societal values and norms on economic actors. The result is an unbridled interpretation and application of the values and norms of the Homo Economicus in the business environment, and perhaps also in the broader society. In the second article, I show that the morality of many economic actors relies on isomorphism, i.e., the attempt to fit into the group by adopting the moral norms surrounding them. In consequence, if the norms prevailing in a specific group or context (such as a specific region or a specific industry) change, it can be expected that actors with an 'isomorphism morality' will also adapt their ethical thinking and their behavior -for the 'better' or for the 'worse'. The article further describes the process through which corporations could emancipate from the ethical norms prevailing in the broader society, and therefore develop an institution with specific norms and values. These norms mainly rely on mainstream business theories praising the economic actor's self-interest and neglecting moral reasoning. Moreover, because of isomorphism morality, many economic actors have changed their perception of ethics, and have abandoned the values prevailing in the broader society in order to adopt those of the economic theory. Finally, isomorphism morality also implies that these economic actors will change their morality again if the institutional context changes. The third article highlights the role and responsibility of business scholars in promoting a systematic reflection and self-critique of the business system and develops alternative models to fill the moral void of the business institution and its inherent legitimacy crisis. Indeed, the current business institution relies on assumptions such as scientific neutrality and specialization, which seem at least partly challenged by two factors. First, self-fulfilling prophecy provides scholars with an important (even if sometimes undesired) normative influence over practical life. Second, the increasing complexity of today's (socio-political) world and interactions between the different elements constituting our society question the strong specialization of science. For instance, economic theories are not unrelated to psychology or sociology, and economic actors influence socio-political structures and processes, e.g., through lobbying (Dobbs, 2006; Rondinelli, 2002), or through marketing which changes not only the way we consume, but more generally tries to instill a specific lifestyle (Cova, 2004; M. K. Hogg & Michell, 1996; McCracken, 1988; Muniz & O'Guinn, 2001). In consequence, business scholars are key actors in shaping both tomorrow's economic world and its broader context. A greater awareness of this influence might be a first step toward an increased feeling of civic responsibility and accountability for the models and theories developed or taught in business schools.

Computer-Aided Business Model Design

There is a lack of dedicated tools for business model design at a strategic level. However, in today's economic world the need to be able to quickly reinvent a company's business model is essential to stay competitive. This research focused on identifying the functionalities that are necessary in a computer-aided design (CAD) tool for the design of business models in a strategic context. Using design science research methodology a series of techniques and prototypes have been designed and evaluated to offer solutions to the problem. The work is a collection of articles which can be grouped into three parts: First establishing the context of how the Business Model Canvas (BMC) is used to design business models and explore the way in which CAD can contribute to the design activity. The second part extends on this by proposing new technics and tools which support elicitation, evaluation (assessment) and evolution of business models design with CAD. This includes features such as multi-color tagging to easily connect elements, rules to validate coherence of business models and features that are adapted to the correct business model proficiency level of its users. A new way to describe and visualize multiple versions of a business model and thereby help in addressing the business model as a dynamic object was also researched. The third part explores extensions to the business model canvas such as an intermediary model which helps IT alignment by connecting business model and enterprise architecture. And a business model pattern for privacy in a mobile environment, using privacy as a key value proposition. The prototyped techniques and proposition for using CAD tools in business model modeling will allow commercial CAD developers to create tools that are better suited to the needs of practitioners.

Ubiquitin Ligases of the N-End Rule Pathway: Assessment of Mutations in UBR1 That Cause the Johanson-Blizzard Syndrome.

Background: Johanson-Blizzard syndrome (JBS; OMIM 243800) is an autosomal recessive disorder that includes congenital exocrine pancreatic insufficiency, facial dysmorphism with the characteristic nasal wing hypoplasia, multiple malformations, and frequent mental retardation. Our previous work has shown that JBS is caused by mutations in human UBR1, which encodes one of the E3 ubiquitin ligases of the N-end rule pathway. The N-end rule relates the regulation of the in vivo half-life of a protein to the identity of its N-terminal residue. One class of degradation signals (degrons) recognized by UBR1 are destabilizing N-terminal residues of protein substrates.Methodology/Principal Findings: Most JBS-causing alterations of UBR1 are nonsense, frameshift or splice-site mutations that abolish UBR1 activity. We report here missense mutations of human UBR1 in patients with milder variants of JBS. These single-residue changes, including a previously reported missense mutation, involve positions in the RING-H2 and UBR domains of UBR1 that are conserved among eukaryotes. Taking advantage of this conservation, we constructed alleles of the yeast Saccharomyces cerevisiae UBR1 that were counterparts of missense JBS-UBR1 alleles. Among these yeast Ubr1 mutants, one of them (H160R) was inactive in yeast-based activity assays, the other one (Q1224E) had a detectable but weak activity, and the third one (V146L) exhibited a decreased but significant activity, in agreement with manifestations of JBS in the corresponding JBS patients.Conclusions/Significance: These results, made possible by modeling defects of a human ubiquitin ligase in its yeast counterpart, verified and confirmed the relevance of specific missense UBR1 alleles to JBS, and suggested that a residual activity of a missense allele is causally associated with milder variants of JBS.

Exclusion of pulmonary embolism using C-reactive protein and D-dimer. A prospective comparison.

Our goal was to evaluate the diagnostic utility of C-reactive protein (CRP) alone or combined with clinical probability assessment in patients with suspected pulmonary embolism (PE), and to compare its performance to a D-dimer assay. We conducted a prospective study in which we performed a common immuno-turbidimetric CRP test and a rapid enzyme-linked immunosorbent assay (ELISA) D-dimer test in 259 consecutive outpatients with suspected PE at the emergency department of a teaching hospital. We assessed clinical probability of PE by a validated prediction rule overridden by clinical judgment. Patients with D-dimer levels > or = 500 microg/l underwent a work-up consisting of lower-limb venous ultrasound, spiral computerized tomography, ventilation-perfusion scan, or pulmonary angiography. Patients were followed up for three months. Seventy-seven (30%) of the patients had PE. The CRP alone had a sensitivity of 84% (95% confidence interval [CI).: 74 to 92%) and a negative predictive value (NPV) of 87% (95% CI: 78 to 93%) at a cutpoint of 5 mg/l. Overall, 61 (24%) patients with a low clinical probability of PE had a CRP < 5 mg/l. Due to the low prevalence of PE (9%) in this subgroup, the NPV increased to 97% (95% CI: 89 to 100%). The D-dimer (cutpoint 500 micro g/l) showed a sensitivity of 100% (95% CI: 95 to 100%) and a NPV of 100% (95% CI: 94 to 100%) irrespective of clinical probability and accurately rule out PE in 56 (22%) patients. Standard CRP tests alone or combined with clinical probability assessment cannot safely exclude PE.