Sensitivity of predictive species distribution models to change in grain size

Predictive species distribution modelling (SDM) has become an essential tool in biodiversity conservation and management. The choice of grain size (resolution) of environmental layers used in modelling is one important factor that may affect predictions. We applied 10 distinct modelling techniques to presence-only data for 50 species in five different regions, to test whether: (1) a 10-fold coarsening of resolution affects predictive performance of SDMs, and (2) any observed effects are dependent on the type of region, modelling technique, or species considered. Results show that a 10 times change in grain size does not severely affect predictions from species distribution models. The overall trend is towards degradation of model performance, but improvement can also be observed. Changing grain size does not equally affect models across regions, techniques, and species types. The strongest effect is on regions and species types, with tree species in the data sets (regions) with highest locational accuracy being most affected. Changing grain size had little influence on the ranking of techniques: boosted regression trees remain best at both resolutions. The number of occurrences used for model training had an important effect, with larger sample sizes resulting in better models, which tended to be more sensitive to grain. Effect of grain change was only noticeable for models reaching sufficient performance and/or with initial data that have an intrinsic error smaller than the coarser grain size.

Evaluation of tumor vascularisation in two rat sarcoma models for studying isolated lung perfusion : Injection route determines the origin of tumour vessels

Résumé Introduction: La perfusion isolée cytostatique du poumon est une technique attractive qui permet l'administration des doses élevées d'un agent cytostatique tout en épargnant dans la mesure du possible la circulation systémique. Cependant, la perfusion de l'artère pulmonaire risque d'épargner le territoire pulmonaire vascularisé par l'intermédiaire des artères bronchiques, ce qui pourrait diminuer l'efficacité de ce traitement au cas où la lésion ciblée est vascularisée par les artères bronchiques. Ce travail est destiné au développement d'un modèle tumoral au niveau des poumons de rongeur (rat) porteur d'un sarcome pulmonaire afin de déterminer si la voie d'injection des cellules tumorales (intraveineuse, versus intratumorale) influencera la vascularisation des tumeurs (provenant du système artères pulmonaires ou artères bronchiques). Méthod: Des tumeurs de sarcomes pulmonaires ont été générées par injection d'une suspension cellulaire de sarcome, soit par injection intraveineuse, soit directement dans le parenchyme pulmonaire par thoracotomie. Ensuite, une perfusion isolée du poumon porteur de la tumeur à l'aide de l'encre a été effectuée, soit par l'artère pulmonaire, soit par le système des artères bronchiques. La distribution de l'encre dans les vaisseaux tumoraux ainsi que dans les vaisseaux non tumoraux du poumon adjacent a été investiguée à l'aide d'une analyse histologique des poumons perfusés. Résultat: L'administration intraveineuse et intratumorale de la suspension de cellules tumorales résulte en des tumeurs similaires sur le plan histologique. Néanmoins, l'injection intra-parenchymateuse démontre des tumeurs plus homogènes et avec un développement plus prédictible, était associée à une survie plus longue qu'après injection intraveineuse. Les analyses histologiques après perfusion isolée à l'aide de l'encre démontre que les tumeurs résultant de l'injection intraveineuse ont développé une vascularisation se basant sur le système d'artères pulmonaires tandis que les tumeurs émergeant après injection intraparenchymateuse ont développé une vascularisation provenant du système des artères bronchiques. Conclusion: Ce travail démontre pour la première fois l'importance du mode de génération de tumeurs pulmonaires en ce qui concerne leur future vascularisation, ce qui pourrait avoir un impact sur leur traitement par perfusion isolée du poumon. Abstract Isolated cytostatic lung perfusion (ILP) is an attractive technique allowing delivery of a high-dose of cytostatic agents to the lungs while limiting systemic toxicity. In developing a rat model of ILP, we have analysed the effect of the route of tumour cell injection on the source of tumour vessels. Pulmonary sarcomas were estab¬lished by injecting a sarcoma cell suspension either by the intravenous (i.v.) route or directly into the lung paren¬chyma. Ink perfusion through either pulmonary artery (PA) or bronchial arteries (BA) was performed and the characteristics of the tumour deposits defined. i.v. and direct injection methods induced pulmonary sarcoma nodules, with similar histological features. The intraparenchymal injection of tumour cells resulted in more reli¬able and reproducible tumour growth and was associat¬ed with a longer survival of the animals. i.v. injected tumours developed a PA-derived vascular tree whereas directly injected tumours developed a BA-derived vasculature.

Avian erythrocytes have functional mitochondria, opening novel perspectives for birds as animal models in the study of ageing.

BACKGROUND: In contrast to mammalian erythrocytes, which have lost their nucleus and mitochondria during maturation, the erythrocytes of almost all other vertebrate species are nucleated throughout their lifespan. Little research has been done however to test for the presence and functionality of mitochondria in these cells, especially for birds. Here, we investigated those two points in erythrocytes of one common avian model: the zebra finch (Taeniopygia guttata). RESULTS: Transmission electron microscopy showed the presence of mitochondria in erythrocytes of this small passerine bird, especially after removal of haemoglobin interferences. High-resolution respirometry revealed increased or decreased rates of oxygen consumption by erythrocytes in response to the addition of respiratory chain substrates or inhibitors, respectively. Fluorometric assays confirmed the production of mitochondrial superoxide by avian erythrocytes. Interestingly, measurements of plasmatic oxidative markers indicated lower oxidative stress in blood of the zebra finch compared to a size-matched mammalian model, the mouse. CONCLUSIONS: Altogether, those findings demonstrate that avian erythrocytes possess functional mitochondria in terms of respiratory activities and reactive oxygen species (ROS) production. Interestingly, since blood oxidative stress was lower for our avian model compared to a size-matched mammalian, our results also challenge the idea that mitochondrial ROS production could have been one actor leading to this loss during the course of evolution. Opportunities to assess mitochondrial functioning in avian erythrocytes open new perspectives in the use of birds as models for longitudinal studies of ageing via lifelong blood sampling of the same subjects.

The MIGCLIM R package - seamless integration of dispersal constraints into projections of species distribution models

The MIGCLIM R package is a function library for the open source R software that enables the implementation of species-specific dispersal constraints into projections of species distribution models under environmental change and/or landscape fragmentation scenarios. The model is based on a cellular automaton and the basic modeling unit is a cell that is inhabited or not. Model parameters include dispersal distance and kernel, long distance dispersal, barriers to dispersal, propagule production potential and habitat invasibility. The MIGCLIM R package has been designed to be highly flexible in the parameter values it accepts, and to offer good compatibility with existing species distribution modeling software. Possible applications include the projection of future species distributions under environmental change conditions and modeling the spread of invasive species.

Conceptual models for designing information systems supporting the strategic analysis of technology environments

1 6 STRUCTURE OF THIS THESIS -Chapter I presents the motivations of this dissertation by illustrating two gaps in the current body of knowledge that are worth filling, describes the research problem addressed by this thesis and presents the research methodology used to achieve this goal. -Chapter 2 shows a review of the existing literature showing that environment analysis is a vital strategic task, that it shall be supported by adapted information systems, and that there is thus a need for developing a conceptual model of the environment that provides a reference framework for better integrating the various existing methods and a more formal definition of the various aspect to support the development of suitable tools. -Chapter 3 proposes a conceptual model that specifies the various enviromnental aspects that are relevant for strategic decision making, how they relate to each other, and ,defines them in a more formal way that is more suited for information systems development. -Chapter 4 is dedicated to the evaluation of the proposed model on the basis of its application to a concrete environment to evaluate its suitability to describe the current conditions and potential evolution of a real environment and get an idea of its usefulness. -Chapter 5 goes a step further by assembling a toolbox describing a set of methods that can be used to analyze the various environmental aspects put forward by the model and by providing more detailed specifications for a number of them to show how our model can be used to facilitate their implementation as software tools. -Chapter 6 describes a prototype of a strategic decision support tool that allow the analysis of some of the aspects of the environment that are not well supported by existing tools and namely to analyze the relationship between multiple actors and issues. The usefulness of this prototype is evaluated on the basis of its application to a concrete environment. -Chapter 7 finally concludes this thesis by making a summary of its various contributions and by proposing further interesting research directions.

Binary classification of dyslipidemia from the waist-to-hip ratio and body mass index: a comparison of linear, logistic, and CART models.

BACKGROUND: We sought to improve upon previously published statistical modeling strategies for binary classification of dyslipidemia for general population screening purposes based on the waist-to-hip circumference ratio and body mass index anthropometric measurements. METHODS: Study subjects were participants in WHO-MONICA population-based surveys conducted in two Swiss regions. Outcome variables were based on the total serum cholesterol to high density lipoprotein cholesterol ratio. The other potential predictor variables were gender, age, current cigarette smoking, and hypertension. The models investigated were: (i) linear regression; (ii) logistic classification; (iii) regression trees; (iv) classification trees (iii and iv are collectively known as "CART"). Binary classification performance of the region-specific models was externally validated by classifying the subjects from the other region. RESULTS: Waist-to-hip circumference ratio and body mass index remained modest predictors of dyslipidemia. Correct classification rates for all models were 60-80%, with marked gender differences. Gender-specific models provided only small gains in classification. The external validations provided assurance about the stability of the models. CONCLUSIONS: There were no striking differences between either the algebraic (i, ii) vs. non-algebraic (iii, iv), or the regression (i, iii) vs. classification (ii, iv) modeling approaches. Anticipated advantages of the CART vs. simple additive linear and logistic models were less than expected in this particular application with a relatively small set of predictor variables. CART models may be more useful when considering main effects and interactions between larger sets of predictor variables.

Increased efflux of amyloid-β peptides through the blood-brain barrier by muscarinic acetylcholine receptor inhibition reduces pathological phenotypes in mouse models of brain amyloidosis.

The formation and accumulation of toxic amyloid-β peptides (Aβ) in the brain may drive the pathogenesis of Alzheimer's disease. Accordingly, disease-modifying therapies for Alzheimer's disease and related disorders could result from treatments regulating Aβ homeostasis. Examples are the inhibition of production, misfolding, and accumulation of Aβ or the enhancement of its clearance. Here we show that oral treatment with ACI-91 (Pirenzepine) dose-dependently reduced brain Aβ burden in AβPPPS1, hAβPPSL, and AβPP/PS1 transgenic mice. A possible mechanism of action of ACI-91 may occur through selective inhibition of muscarinic acetylcholine receptors (AChR) on endothelial cells of brain microvessels and enhanced Aβ peptide clearance across the blood-brain barrier. One month treatment with ACI-91 increased the clearance of intrathecally-injected Aβ in plaque-bearing mice. ACI-91 also accelerated the clearance of brain-injected Aβ in blood and peripheral tissues by favoring its urinal excretion. A single oral dose of ACI-91 reduced the half-life of interstitial Aβ peptide in pre-plaque mhAβPP/PS1d mice. By extending our studies to an in vitro model, we showed that muscarinic AChR inhibition by ACI-91 and Darifenacin augmented the capacity of differentiated endothelial monolayers for active transport of Aβ peptide. Finally, ACI-91 was found to consistently affect, in vitro and in vivo, the expression of endothelial cell genes involved in Aβ transport across the Blood Brain Brain (BBB). Thus increased Aβ clearance through the BBB may contribute to reduced Aβ burden and associated phenotypes. Inhibition of muscarinic AChR restricted to the periphery may present a therapeutic advantage as it avoids adverse central cholinergic effects.

Exposure models in Switzerland: an overview of the present situation

A survey was undertaken among Swiss occupational health and safety specialists in 2004 to identify uses, difficulties, and possible developments of exposure models. Occupational hygienists (121), occupational physicians (169), and safety specialists (95) were surveyed with an in depth questionnaire. Results obtained indicate that models are not used very much in practice in Switzerland and are reserved to research groups focusing on specific topics. However, various determinants of exposure are often considered important by professionals (emission rate, work activity), and in some cases recorded and used (room parameters, operator activity). These parameters cannot be directly included in present models. Nevertheless, more than half of the occupational hygienists think that it is important to develop quantitative exposure models. Looking at research institutions, there is, however, a big interest in the use of models to solve problems which are difficult to address with direct measurements; i. e. retrospective exposure assessment for specific clinical cases and prospective evaluation for new situations or estimation of the effect of selected parameters. In a recent study about cases of acutepulmonary toxicity following water proofing spray exposure, exposure models have been used to reconstruct exposure of a group of patients. Finally, in the context of exposure prediction, it is also important to report about a measurement database existing in Switzerland since 1991. [Authors]