Mineral inventory of continuously erupting basaltic andesites at Arenal volcano, Costa Rica: implications for interpreting monotonous, crystal-rich, mafic arc stratigraphies

Except for the first 2 years since July 29, 1968, Arenal volcano has continuously erupted compositionally monotonous and phenocryst-rich (similar to35%) basaltic andesites composed of plagioclase (plag), orthopyroxene (opx), clinopyroxene (cpx), spinel olivine. Detailed textural and compositional analyses of phenocrysts, mineral inclusions, and microlites reveal comparable complexities in any given sample and identify mineral components that require a minimum of four crystallization environments. We suggest three distinct crystallization environments crystallized low Mg# (<78) silicate phases from andesitic magma but at different physical conditions, such as variable pressure of crystallization and water conditions. The dominant environment, i.e., the one which accounts for the majority of minerals and overprinted all other assemblages near rims of phenocrysts, cocrystallized clinopyroxene (Mg# similar to71-78), orthopyroxene (Mg# similar to71-78), titanomagnetite and plagioclase (An(60) to An(85)). The second environment cocrystallized clinopyroxene (Mg# 71-78), olivine (<Fo(78)), titanomagnetite, and very high An (similar to90) plagioclase, while the third cocrystallized clinopyroxene (Mg# 71-78) with high (>7) Al/Ti and high (>4 wt.%) Al2O3, titanomagnetite with considerable Al2O3 (10-18 wt.%) and possibly olivine but appears to lack plagioclase. A fourth crystallization environment is characterized by clinopyroxene (e.g., Mg#=similar to78-85; Cr2O3=0.15-0.7 wt.%), Al-, Cr-rich spinel olivine (similar toFo(80)), and in some circumstances high-An (>80) plagioclase. This assemblage seems to record mafic inputs into the Arenal system and crystallization at high to low pressures. Single crystals cannot be completely classified as xenocrysts, antecrysts (cognate crystals), or phenocrysts, because they often contain different parts each representing a different crystallization environment and thus belong to different categories. Bulk compositions are mostly too mafic to have crystallized the bulk of ferromagnesian minerals and thus likely do not represent liquid compositions. On the other hand, they are the cumulative products of multiple mixing events assembling melts and minerals from a variety of sources. The driving force for this multistage mixing evolution to generate erupting basaltic andesites is thought to be the ascent of mafic magma from lower crustal levels to subvolcanic depths which at the same time may also go through compositional modification by fractionation and assimilation of country rocks. Thus, mafic magmas become basaltic andesite through mixing, fractionation and assimilation by the time they arrive at subvolcanic depths. We infer new increments of basaltic andesite are supplied nearly continuously to the subvolcanic reservoir concurrently to the current eruption and that these new increments are blended into the residing, subvolcanic magma. Thus, the compositional monotony is mostly the product of repetitious production of very similar basaltic andesite. Furthermore, we propose that this quasi-constant supply of small increments of magma is the fundamental cause for small-scale, decade-long continuous volcanic activity; that is, the current eruption of Arenal is flux-controlled by inputs of mantle magmas. (C) 2004 Elsevier B.V. All rights reserved.

Gabbro, plagiogranite and associated dykes in the supra-subduction zone Evros Ophiolites, NE Greece

The incomplete Evros ophiolites in NE Greece form a NE-SW-oriented discontinuous belt in the Alpine orogen of the north Aegean. Field data, petrology and geochemistry are presented here for the intrusive section and associated mafic dykes of these ophiolites. Bodies of high-level isotropic gabbro and plagiogranite in the ophiolite suite are cross-cut by NE-SW-trending boninitic and tholeiitic-boninitic affinity dykes, respectively. The dykes fill tensile fractures or faults, which implies dyke emplacement in an extensional tectonic regime. The tholeiitic-transitional boninitic gabbro is REE- and HFS-depleted relative to N-MORB, indicating derivation from melting of a refractory mantle peridotite source. Associated boninitic dykes are slightly LREE-enriched, showing mineral and whole-rock geochemistry similar to the gabbro. The plagiogranite is a strongly REE-enriched high-silica trondhjemite, with textures and composition typical for an oceanic crust differentiate. Plagiogranite-hosted tholeiitic and transitional boninitic dykes are variably REE-enriched. Geochemical modelling indicates origin of the plagiogranite by up to 75% fractional crystallization of basaltic magma similar to that producing the associated tholeiitic dykes. All mafic rocks have high LILE/HFSE ratios and negative Ta-Nb-Ti and Ce anomalies, typical for subduction zone-related settings. The mafic rocks show a similar trace-element character to the mafic lavas of an extrusive section in Bulgaria, suggesting they both form genetically related intrusive and extrusive suites of the Evros ophiolites. The field occurrence, the structural context, the petrology and geochemical signature of the studied magmatic assemblage provide evidence for its origin in a proto-arc (fore-arc) tectonic setting, thus tracing the early stages of the tectono-magmatic evolution of Jurassic arc-marginal basin system that has generated the supra-subduction type Evros ophiolites.

H2O-δD-Fe-III relations of dehydrogenation and dehydration processes in magmatic amphiboles

Stable isotope compositions of a suite of magmatic amphiboles from alkaline basalts and andesitic rocks were examined to constrain the effects of degassing processes on the hydrogen isotope compositions. The Fe3+ (as Fe3+/Fe-total) and H2O contents, as well as the H isotope compositions of the amphiboles, differ markedly (27-58%, 0.5-2.2 wt%, -107 to -15 parts per thousand, respectively) but indicate systematic variations. The observed trends can be explained either as dehydrogenation or dehydration processes, both of which are coupled to oxidation processes, the latter most probably related to O2- substitution within amphiboles. The dehydrogenation-dehydration models can be used to assess the primary compositions of the magmas. As an important example, delta D values of amphiboles of Martian meteorites are discussed in a similar context. Copyright (c) 2006 John Wiley & Sons, Ltd.

The birth of the Rheic Ocean - Early Palaeozoic subsidence patterns and subsequent tectonic plate scenarios

New plate-tectonic reconstructions of the Gondwana margin suggest that the location of Gondwana-derived terranes should not only be guided by the models, but should also consider the possible detrital input from some Asian blocks (Hunia), supposed to have been located along the Cambrian Gondwana margin, and accreted in the Silurian to the North-Chinese block. Consequently, the Gondwana margin has to be subdivided into a more western domain, where the future Avalonian blocks will be separated from Gondwana by the opening Rheic Ocean, whereas in its eastern continuation, hosting the future basement areas of Central Europe, different periods of crustal extension should be distinguished. Instead of applying a rather cylindrical model, it is supposed that crustal extension follows a much more complex pattern, where local back-arcs or intra-continental rifts are involved. Guided by the age data of magmatic rocks and the pattern of subsidence curves, the following extensional events can be distinguished: During the early to middle Cambrian, a back-arc setting guided the evolution at the Gondwana margin. Contemporaneous intra-continental rift basins developed at other places related to a general post-PanAfrican extensional phase affecting Africa Upper Cambrian formation of oceanic crust is manifested in the Chamrousse area, and may have lateral cryptic relics preserved in other places. This is regarded as the oceanisation of some marginal basins in a context of back-arc rifting. These basins were closed in a mid-Ordovician tectonic phase, related to the subduction of buoyant material (mid-ocean ridge?) Since the Early Ordovician, a new phase of extension is observed, accompanied by a large-scale volcanic activity, erosion of the rift shoulders generated detritus (Armorican Quartzite) and the rift basins collected detrital zircons from a wide hinterland. This phase heralded the opening of Palaeotethys, but it failed due to the Silurian collision (Eo-Variscan phase) of an intra-oceanic arc with the Gondwana margin. During this time period, at the eastern wing of the Gondwana margin begins the drift of the future Hunia microcontinents, through the opening of an eastern prolongation of the already existing Rheic Ocean. The passive margin of the remaining Gondwana was composed of the Galatian superterranes, constituents of the future Variscan basement areas. Remaining under the influence of crustal extension, they will start their drift to Laurussia since the earliest Devonian during the opening of the Palaeotethys Ocean. (C) 2008 Elsevier B.V. All rights reserved.

Quantification of magmatic and hydrothermal processes in a peralkaline syenite-alkali granite complex based on textures, phase equilibria, and stable and radiogenic isotopes

The Puklen complex of the Mid-Proterozoic Gardar Province, South Greenland, consists of various silica-saturated to quartz-bearing syenites, which are intruded by a peralkaline granite. The primary mafic minerals in the syenites are augite +/- olivine + Fe-Ti oxide + amphibole. Ternary feldspar thermometry and phase equilibria among mafic silicates yield T = 950-750degreesC, a(SiO2) = 0.7-1 and an f(O2) of 1-3 log units below the fayalite-magnetite-quartz (FMQ) buffer at 1 kbar. In the granites, the primary mafic minerals are ilmenite and Li-bearing arfvedsonite, which crystallized at temperatures below 750degreesC and at f(O2) values around the FMQ buffer. In both rock types, a secondary post-magmatic assemblage overprints the primary magmatic phases. In syenites, primary Ca-bearing minerals are replaced by Na-rich minerals such as aegirine-augite and albite, resulting in the release of Ca. Accordingly, secondary minerals include ferro-actinolite, (calcite-siderite)(ss), titanite and andradite in equilibrium with the Na-rich minerals. Phase equilibria indicate that formation of these minerals took place over a long temperature interval from near-magmatic temperatures down to similar to300degreesC. In the course of this cooling, oxygen fugacity rose in most samples. For example, late-stage aegirine in granites formed at the expense of arfvedsonite at temperatures below 300degreesC and at an oxygen fugacity above the haematite-magnetite (HM) buffer. The calculated delta(18)O(melt) value for the syenites (+5.9 to +6.3parts per thousand) implies a mantle origin, whereas the inferred delta(18)O(melt) value of <+5.1parts per thousand for the granitic melts is significantly lower. Thus, the granites require an additional low-delta(18)O contaminant, which was not involved in the genesis of the syenites. Rb/Sr data for minerals of both rock types indicate open-system behaviour for Rb and Sr during post-magmatic metasomatism. Neodymium isotope compositions (epsilonNd(1170 Ma) = -3.8 to -6.4) of primary minerals in syenites are highly variable, and suggest that assimilation of crustal rocks occurred to variable extents. Homogeneous epsilon(Nd) values of -5.9 and -6.0 for magmatic amphibole in the granites lie within the range of the syenites. Because of the very similar neodymium isotopic compositions of magmatic and late- to post-magmatic minerals from the same syenite samples a principally closed-system behaviour during cooling is implied. In contrast, for the granites an externally derived fluid phase is required to explain the extremely low epsilon(Nd) values of about -10 and low delta(18)O between +2.0 and +0.5parts per thousand for late-stage aegirine, indicating an open system in the late-stage history. In this study we show that the combination of phase equilibria constraints with stable and radiogenic isotope data on mineral separates can provide much better constraints on magma evolution during emplacement and crystallization than conventional whole-rock studies.

Magmatic fluids in the Breccia-hosted epithermal Au-Ag deposit of Rosia Montana, Romania

The breccia-hosted epithermal Au-Ag deposit of Rosia Montana is located 7 kin northeast of Abrud, in the northern part of the South Apuseni Mountains, Romania. Estimated total reserves of 214.91 million metric toils (Mt) of ore at 1.46 g/t An and 6.9 g/t Ag (10.1 Moz of An and 47.6 Moz of Ag) make Rosia Montana one of the largest gold deposits in Europe. At this location, Miocene calc-alkaline magmatic and hydrothermal activity was associated with local extensional tectonics within a strike-slip regime related to the indentation of the Adriatic microplate into the European plate during the Carpathian orogenesis. The host rocks of the magmatic complex consist of pre-Mesozoic metamorphosed continental crust covered by Cretaceous turbiditic sediment (flysch). Magmatic activity at Rosia Montana and its surroundings occurred in several pulses and lasted about 7 m.y, Rosia Montana is a breccia-hosted epithermal system related to strong phreatomagmatic activity due to the shallow emplacement of the Montana dacite. The Montana dacite intruded Miocene volcaniclastic material (volcaniclastic breccias) and crops out at Cetate and Carnic Hills. Current mining is focused primarily on the Cetate open pit, which was mapped in detail, leading to the recognition of three distinct breccia bodies: the dacite breccia with a dominantly hydrothermal matrix, the gray polymict breccia with a greater proportion of sand-sized matrix support, and the black polymict breccia, which reached to the surface, contains carbonized tree trunks and has a dominantly barren elastic matrix. The hydrothermal alteration is pervasive. Adularia alteration with a phyllic overprint is ubiquitous; silicification and argillic alteration occur locally. Mineralization consists of quartz, adularia, carbonates (commonly Mn-rich), pyrite, Fe-poor sphalerite, galena, chalcopyrite, tetrahedrite, and native gold and occurs as disseminations, as well as in veins and filling vugs within the Montana dacite and the different breccias. The age of mineralization (12.85 +/- 0.07 Ma) was determined by Ar-40- Ar-39 dating on hydrothermal adularia crystals from vugs in the dacite breccia in the Cetate open pit. Microthermometric measurements of fluid inclusions in quartz phenocrysts from the Montana dacite revealed two fluid types that are absent from the hydrothermal breccia and must have been trapped at depth prior to dacite dome emplacement: brine inclusions (32-55 -wt % NaCl equiv, homogenizing at T-h > 460 degrees C) and intermediate density fluids (4.9-15.6 wt % NaCl equiv, T, between 345 degrees-430 degrees C). Secondary aqueous fluid inclusion assemblages in the phenocrysts have salinities of 0.2 to 2.2 wt percent NaCl equiv and T-h of 200 degrees to 280 degrees C. Fluid inclusion assemblages in hydrothermal quartz from breccias and veins have salinities of 0.2 to 3.4 wt percent NaCl equiv and T-h, from 200 degrees to 270 degrees C. The oxygen isotope composition of several zones of an ore-related epithermal quartz crystal indicate a very constant delta O-18 of 4.5 to 5.0 per mil for the mineralizing fluid, despite significant salinity and temperature variation over time. Following microthermometry, selected fluid inclusion assemblages were analyzed by laser ablation-inductively coupled-plasma mass spectrometry (LA-ICMS). Despite systematic differences in salinity between phenocryst-hosted fluids trapped at depth and fluids from quartz in the epithermal breccias, all fluids have overlapping major and trace cation ratios, including identical Na/K/Rb/Sr/Cs/Ba. Consistent with the constant near-magmatic oxygen isotope composition of the hydrothermal fluids, these data strongly indicate a common magmatic component of these chemically conservative solutes in all fluids. Cu, Pb, Zn, and Mn show variations in concentration relative to the relatively non-reactive alkalis, reflecting the precipitation of sulfide minerals together with An in the epithermal breccia, and possibly of Cu in an inferred subjacent porphyry environment. The magmatic-hydrothermal processes responsible for epithermal Au-Ag mineralization at Rosia Montana are, however, not directly related to the formation of the spatially associated porphyry Cu-Au deposit of Rosia Poieni, which occurred lout 3 m.y. later.

Construction mechanisms and thermal evolution of upper crustal intrusions : the Saint-Jean-du-Doigt bimodal intrusion (Brittany, France)

Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.

Tectonomagmatic evolution of Western Amazonia: Geochemical characterization and zircon U-Pb geochronologic constraints from the Peruvian Eastern Cordilleran granitoids

The results of a coupled, in situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) U-Pb study on zircon and geochemical characterization of the Eastern Cordilleran intrusives of Peru reveal 1.15 Ga of intermittent magmatism along central Western Amazonia, the Earth's oldest active open continental margin. The eastern Peruvian batholiths are volumetrically dominated by plutonism related to the assembly and breakup of Pangea during the Paleozoic-Mesozoic transition. A Carboniferous-Permian (340-285 Ma) continental arc is identified along the regional orogenic strike from the Ecuadorian border (6 degrees S) to the inferred inboard extension of the Arequipa-Antofalla terrane in southern Peru (14 degrees S). Widespread crustal extension and thinning, which affected western Gondwana throughout the Permian and Triassic resulted in the intrusion of the late- to post-tectonic La Merced-San Ramon-type anatectites dated between 275 and 220 Ma, while the emplacement of the southern Cordillera de Carabaya peraluminous granitoids in the Late Triassic to Early Jurassic (220-190 Ma) represents, temporally and regionally, a separate tectonomagmatic event likely related to resuturing of the Arequipa-Antofalla block. Volcano-plutonic complexes and stocks associated with the onset of the present Andean cycle define a compositionally bimodal alkaline suite and cluster between 180 and 170 Ma. A volumetrically minor intrusive pulse of Oligocene age (ca. 30 Ma) is detected near the southwestern Cordilleran border with the Altiplano. Both post-Gondwanide (30-170 Ma), and Precambrian plutonism (691-1123 Ma) are restricted to isolated occurrences spatially comprising less than 15% of the Eastern Cordillera intrusives. Only one remnant of a Late Ordovician intrusive belt is recognized in the Cuzco batholith (446.5 +/- 9.7 Ma) indicating that the Famatinian arc system previously identified in Peru along the north-central Eastern Cordillera and the coastal Arequipa-Antofalla terrane also existed inboard of this parautochthonous crustal fragment. Hitherto unknown occurrences of late Mesoproterozoic and middle Neoproterozoic granitoids from the south-central cordilleran segment define magmatic events at 691 +/- 13 Ma, 751 +/- 8 Ma, 985 +/- 14 Ma, and 1071-1123 +/- 23 Ma that are broadly coeval with the Braziliano and Grenville-Sunsas orogenies, respectively. Our data suggest the existence of a continuous orogenic belt in excess of 3500 km along Western Amazonia during the formation of Rodinia, its ``early'' fragmentation prior to 690 Ma, and support a model of reaccretion of the Paracas-Arequipa-Antofalla terrane to western Gondwana in the Early Ordovician with subsequent detachment of the Paracas segment in form of the Mexican Oaxaquia microcontinent in Middle Ordovician. A tectonomagmatic model involving slab detachment, followed by underplating of cratonic margin by asthenospheric mantle is proposed for the genesis of the volumetrically dominant Late Paleozoic to early Mesozoic Peruvian Cordilleran batholiths.

Epidote in hydrous mafic magmas : near solidus phase relations in the lower crust

Crystallisation of hydrous mafic magmas at high pressure is a subject of numerous petrologic and experimental studies since the last century and is mainly related to the process of continental crust formation and the possible link between mantle derived melts and low pressure granitoids. Albeit the sequence of crystallization is well constrained by experimental studies, the origin of exposed lower crustal rocks exposed on the earth surface is controversial. Ones line of argument is favouring high pressure crystallization of dry or wet mafic magmas, whereas others invoke partial melting of pre-existing crust. Therefore studies involving field, textural and chemical observations of exposed lower crust such as in Kohistan (Pakistan) or Talkeetna (Alaska) are crucial to understand the continental crust formation processes via arc magmatism. Epidote-bearing gabbros are very sparse and always associated with the deep part of continental crust (>30 km) as in the Kohistan Arc Complex (Pakistan) or in the Chelan Complex (western U.S.). Magmatic epidote is restricted to a small temperature interval above the water-saturated solidus of MORB and represent the last crystallizing liquids in lower crustal regions. However, epidote and melt stability at lower crustal pressures are not clearly established.¦The Chelan complex (western U.S.) at the base of the Cascadian Arc is composed mainly by peraluminous tonalité associated with gabbroic and ultramafic rocks and was traditionally interpreted as a migmatitic terrain. However field, chemical and mineralogical observations rather suggest a magmatic origin and point to a protracted crystallization at intermediate to high pressure ~ 1.0 GPa dominated by amphibole fractionation and followed by isobaric cooling down to 650°C. Crystal fractionation modelling using whole rock composition and field constraints is able to generate peraluminous tonalité. The modelled crystallisation sequence and the volume proportions are in agreement with experimental studies performed at these pressures. The Chelan complex was thus not formed during a partial melting event, but represent the sequence of crystallisation occurring at the base of the crust. Massive fractionation of hornblende is able to generate peraluminous tonalité without significant assimilation of crustal rock.¦Similarly to the Chelan complex, the base of the Kohistan arc is composed of cumulates derived by high pressure crystallization of hydrous magma. In garnet gabbros, epidote occurs as magmatic phase, crystallising from hydrous interstitial melt trapped between grain boundaries at lower crustal pressures (Ρ ~ 1.2 GPa) for temperature of (650-700 °C). Trace and REE signature in epidote indicate that epidote was formed through peritectic reaction involving garnet, clinopyroxene and plagioclase. At the beginning of the crystallisation epidote signature is dominated by REE content in the melt, whereas at the end the signature is dominated by reacting phases. Melt in equilibrium with epidote inferred from the partition coefficients available is similar to intrusive tonalité up the section indicating that hydrous melt was extracted from the garnet gabbros. In some gabbros epidote shows single homogeneous compositions, while in others coexisting epidote have different compositions indicating the presence of solvi along the Al-Fe3+ join. The overgowths are only observed in presence of paragonite in the assemblage, suggesting high water content. At high water content, the hydrous solidus is shift to lower temperature and probably intersects the solvi observed along the Al-Fe3+ join. Therefore, several compositions of epidote is stable at high water content.¦-¦La composition chimique de la croûte continentale est considérée comme similaire à celle du magmatisme calco-alcalin de marge continentale active (enrichissement en éléments mobiles dans les fluides, anomalies négatives en Nb, Ta et éléments à haut potentiel électronique, etc...). Cependant la nature andésitique de la croûte continentale (Si02 > 60 wt%), résultant des nombreuses intrusions de granitoïdes dans la croûte supérieure, est sujette à polémique et le lien entre les magmas dérivés du manteau et les roches évoluées de faible profondeur n'est pas clairement établi (fusion partielle de croûte basaltique, cristallisation fractionnée à haute pression, etc...).¦Les affleurements de croûte profonde sont rares mais précieux, car ils permettent d'observer les phénomènes se passant à grande profondeur. Le complexe de Chelan (Washington Cascades) en est un exemple. Formé à environ 30 km de profondeur, il est composé de roches gabbroïques et ultramafiques, ainsi que de tonalités, qui furent souvent interprétés comme le produit de la fusion partielle de la croûte. Cependant, les relations de terrain, la chimie des éléments majeurs et des éléments traces sont cohérentes avec l'évolution d'un complexe magmatique mafique dans la croûte profonde ou moyenne ( 1.0 GPa), dominée par le fractionnement de l'amphibole. Après son emplacement, le complexe a subi un refroidissement isobare jusqu'à des températures de l'ordre de 650 °C, déduit de la composition chimique des minéraux. Un bilan de masse contraint pax les observations de terrain permet de calculer la séquence et les volumes de fractionnement. Les faciès évolués légèrement hyperalumineux observés sur le terrain peuvent être générés par la cristallisation de 3 % de websterite à olivine, 12 % d'hornblendite à pyroxène 33 % d'hornblendite, 19 % de gabbros, 15 % de diorite et 2 % de tonalité. Nous montrons ainsi qu'une série de fractionnement contrôlée par l'amphibole permet de générer des tonalités sans assimilation de matériel crustal et l'exemple de Chelan illustre la viabilité de ce processus dans la formation de croûte continentale.¦Les réactions proches du solidus saturé en H20 dans les systèmes basaltiques à des pressions élevées restent énigmatiques. Diverses expériences tendent à montrer que l'épidote est stable dans ces conditions, mais rarement observée (décrite ?) comme phase primaire dans les systèmes naturels. Les épidotes trouvées dans les gabbros de Jijal (nord-Pakistan) montrent des textures de type .magmatique telles qu'observées dans les roches évoluées. Le contenu en terres rares de ces épidotes est très variable allant de signatures enrichies en terres rares légères impliquant la présence de liquide interstitiel à des signatures complètement déprimées en ces mêmes éléments, évoquant une cristallisation en coexistence avec du grenat. Ces diverses signatures reflètent un chemin de cristallisation en présence de liquide interstitiel et enregistrent des réactions péritectiques impliquant grenat, clinopyroxene et plagioclase à des pressions de ~ 1.2 GPa pour des températures de 650-700 °C. Cependant dans quelques échantillons deux ou trois compositions d'épidotes coexistent démontrant la présence de lacunes d'immiscibilité le long de la solution solide épidote-clinozoïsite. La forte teneur en H20 du liquide magmatique est certainement à l'origine de la coexistence de deux compositions distinctes.

The Paleozoic magmatic history of the Maggia and Sambuco nappes, Lower Penninic, Central Lepontine Alps

Résumé : Les corps magmatiques sont des indicateurs essentiels dans toute reconstitution paléogéographique et/ou géodynamique d'un cycle orogénique, en particulier en contexte polycyclique, où la plupart des autres indices ont été oblitérés. Ils sont aisément datables et leurs caractéristiques géochimiques permettent de contraindre leur contexte tectonique de mise en place. Cette approche a été appliquée aux socles pré-mésozoïques des nappes penniques inférieures de Sambuco et de la Maggia, dans les Alpes centrales lepontines. Plusieurs événements magmatiques ont été identifiés dans le socle de Sambuco et datés par la méthode U-Pb sur zircon couplée à la technique LA-ICPMS. La suite calco-alcaline mafique rubanée de Scheggia est datée du Cambrien inférieur à 540-530 Ma ; le métagranite alumineux oeillé de Sasso Nero a un âge de 480-470 Ma, tout comme bien d'autres «older orthogneisses» des socles alpins. Il contient des zircons hérités d'âge panafricain à 630-610 Ma, indicateur d'une affiliation gondwanienne de ces terrains. Le pluton calco-alcalin du Matorello est daté à environ 300-310 Ma, et les filons lamprophyriques qu'il abrite à 300 Ma. La granodiorite de Cocco et le leucogranite de Ruscada, tous deux intrudés dans le socle de la nappe adjacente de la Maggia, ont des âges similaires à celui du Matorello. Ceci ajouté aux similitudes magmatiques observées entre Cocco et Matorello suggère une proximité paléogéographique des deux nappes au Permien-Carbonifère. Or ces dernières sont actuellement considérées appartenir à deux domaines paléogéographiques mésozoïques distincts : helvétique pour Sambuco et briançonnais pour Maggia, séparés par un bassin océanique. Si tel fut le cas, aucun mouvement décrochant ne doit avoir décalé les marges continentales de l'océan, retrouvées en parfaite coïncidence lors de sa fermeture. Le Matorello est un pluton recristallisé en faciès amphibolite et plissé par cinq phases successives de déformation non-coaxiales, qui ont conduit à son renversement complet, attesté par des indicateurs de paléogravité. Il préserve de spectaculaires phénomènes de coexistence liquide de magmas (essaims d'enclaves et Bills composites). Ce pluton était originellement tabulaire, construit par l'accumulation de multiples injections de magma en feuillets d'épaisseur métrique à décamétrique. Suivant le rythme de mise en place, les injections successives ont rapidement cristallisé avec des contours nets et bien définis (Bills composites) ou se sont mélangées avec les précédentes pour former une couche non consolidée de plusieurs dizaines de mètres d'épaisseur (granodiorite principale). Les injections individuelles sont délimitées par de subtils contrastes en granulométrie, proportions modales ou ségrégation de minéraux (schlieren), ou par des phénomènes d'érosion le long des surfaces de contact. Deux couches métriques à contour sinueux consistent en une accumulation compacte d'enclaves mafiques arrondies dans une matrice granodioritique fine. Le granoclassement des enclaves, la présence de figures de charge et de phénomènes érosifs en base de couche, ainsi que des schlieren de biotite entrecroisés évoquent l'injection de coulées de magma chargé d'enclaves et de faible viscosité en régime hydrodynamique turbulent dans un encaissant granodioritique encore largement liquide. La nature hybride des roches implique une chambre magmatique sous-jacente, en cours de différenciation et périodiquement réalimentée. Les magmas sont des liquides mafiques dérivés du manteau et des liquides anatectiques d'origine crustale, comme l'indique la gamme mesurée des rapports isotopiques initiaux du Sr (0.704 à 0.709) et des valeurs epsilon Nd (-2.1 à -4.7). Ces données montrent également que la contribution crustale est dominante, en accord avec les isotopes du plomb. Les phénomènes d'hybridation ont vraisemblablement eu lieu en base de croûte et dans la chambre magmatique sous-jacente au laccolite du Matorello. Les indicateurs de paléogravité du Matorello contribuent accessoirement à la compréhension de l'architecture actuelle de la nappe de Sambuco. Des plis isoclinaux à surface axiale verticale peuvent être mis en évidence par le contact entre les faciès dioritique et granodioritique. L'antiforme dont le Matorello forme le coeur est un synclinal, ce qui le positionne dans le Flanc inverse du grand pli couché que forme la nappe de Sambuco. Par ailleurs, des blocs de gneiss retrouvés dans le wildflysch sommital de la couverture de la nappe d'Antigorio ont été affiliés dans cette étude au pluton du Matorello. Ceci implique que le front de la nappe de Sambuco chevauchait déjà la partie est du bassin d'Antigorio au moment de sa fermeture. Par conséquent, ce n'est qu'en position externe que la nappe du Lebendun chevauche directement la nappe d'Antigorio. Abstract Magmatic bodies are important markers in paleo-geographic or geodynamic reconstructions of orogenic cycles, even more so in the case of polycyclic events where many of the other markers have been overwritten or destroyed. Plutons are relatively easy to date and their geochemical properties help constrain the tectonic context in which they were emplaced. This study focuses on the pre-mesozoic basement in the Sambuco and Maggia lower Penninic nappes located in the central Lepontine domain of the Alps. A number of magmatic events have been identified in the Sambuco basement. These events were dated using LA-ICPMS U/Pb on zircon grains. The mafic calc-alkaline banded Scheggia suite is dated as lower Cambrian, 540-530 Ma. The Al-rich Sasso-Nero lenticular gneiss is 480-470 Ma old (similarly to many older orfhogneisses of the Alpine basement) and contains 630-610 Ma old pan-African inherited zircons that illustrate the Gondwanian origin of these terranes.The calc-alkaline Matorello pluton is dated as 310-300 Ma whereas the lamprophyric bodies it contains are of 300 Ma. The Cocco granodiorite and the Ruscada leucogranite both intrude the basement of the adjacent Maggia nappe and are of similar ages to the Matorello. The ages as well as the geochemical similarities between the Cocco, Rucada and Matorello plutons suggest their paleo-geographic proximity at the Permian-Carboniferous boundary. However, these nappes are currently considered as belonging to two different Mesozoic paleo-geographic domains. Indeed, the Sambuco is considered as Helvetic whereas the Maggia is said to be Briançonnais, both separated by an oceanic basin. If this is the case, then it is essential that nostrike-slip movement has misaligned both continental margins since these coincide perfectly now that the oceanic domain closed. The Matorello pluton was originally a tabular intrusion, built up by the accumulation of multiple, several meter-thick, subhorizontal sheet-like injections of magma. Depending on their emplacement rate, the successive magma injections either solidified rapidly with sharp and rather well-defined boundaries (like the composite sills) or mingled with previous injections generating a thick molten layer up to several tens to hundred meters thick, like in the main granodioritic facies. These coalesced injections are hardly distinguishable, however subtle contrasts in granulometry, mineral modal proportions or mineral sorting (cross-bedded biotite-rich schlieren), as well as erosional features and/or crystal entrapment along contact surfaces allow to distinguish between the different injections. Two exceptional meter-thick layers display sinuous boundaries with the host granodiorite and consist of a densely packed accumulation of mafic enclaves in a granodioritic matrix. Gravitational sorting of the enclaves with load cast features at the base of the layers and sinuous biotite schlieren point to injection of low viscosity turbulent composite magma flows in the still largely molten granodiorite host. The hybrid nature of these rocks implies the existence of á periodically replenished and differentiated underlying magma chamber. Magmas are mafic liquids derived from the mantle and anatectic liquids of crustal origin, as shown by the (87Sr/86Sr), and epsilon Nd values (0.704-0.709 and -2.1 to -4.7 respectively. These data show that the crustal contribution is important, as confirmed by the Pb isotopes. The hybridisation processes seem to have occurred in the lower crust in magma chambers underlying the Matorello laccolith. The paleo-gravity markers in the Matorello help understand the architecture of the Sambuco nappe. Isoclinal folds with a vertical axial plane can be seen at the contact between dioritic and granodioritic facies. The antiform structure of which the Matorello is the heart is in fact a syncline. This places it in the inverse flanc of the large recumbent fold that constitutes the Sambuco nappe. The gneiss blocs found in the summital wildflysh cover of the Antigorio nappe have been linked to the Matorello pluton. This means that the front of the Sambuco nappe already overlapped the Antigorio basin when it closed. This implies that the Lebendun nappe can only overlap the Antigorio nappe in it's external position. Résumé grand public La chaîne alpine est la conséquence de la collision tertiaire entre deux masses continentales, l'Europe au nord et la péninsule apulienne africaine au sud, originellement séparées par l'océan mésozoïque téthysien. Cette collision a fermé un espace large de plusieurs centaines de km avec pour résultat l'écaillage de la croûte terrestre en unités tectoniques de dimensions variables, qui se sont empilées, imbriquées, éventuellement replissées en nappes de géométrie complexe. Cet amoncellement de 40 km d'épaisseur a vu sa température et sa pression lithostatique internes augmenter jusqu'à des valeurs de l'ordre de 680 °C et 6000 bars, induisant une recristallisation métamorphique des roches. L'un des objectifs de la géologie alpine est de reconstituer la géographie de la région aux temps mésozoïques de l'océan téthysien, en d'autres termes, de replacer chacune des unités tectoniques identifiées au sein de l'empilement alpin dans sa position originelle. Le défi est de taille et peut être comparé à celui de la reconstitution d'un vaste puzzle, dont certaines pièces seraient endommagées au niveau de leur contour ou leurs couleurs (métamorphisme), dissimulées par d'autres (enfouissement), voire tombées de la table de jeu (subduction, échappement latéral). Plusieurs approches ont été mises en oeuvre au cours du siècle écoulé. On citera en particulier la stratigraphie, la tectonique et le paléomagnétisme. Dans ce travail, nous avons essentiellement utilisé des techniques de datation isotopique absolue des roches (U/Pb sur zircon) qui, sur la base des connaissances acquises par l'ensemble des autres disciplines géologiques, nous ont permis de mieux contraindre ta paléogéographie mésozoïque du domaine «pennique inférieur » des Alpes centrales lépontines. Et au-delà? Nous savons tous que la disposition des continents à la surface de la Terre évolue constamment. Il est donc tentant d'essayer de remonter plus loin encore dans le temps et de reconstituer la physionomie de la marge sud européenne, tout au moins certains éléments de son histoire, au cours de l'ère paléozoïque. Les traces de ces événements très anciens sont naturellement ténues et dans ce contexte, les techniques de datation mentionnées ci-dessus deviennent les outils les plus performants. Ainsi, des datations u/Pb sur zircon nous ont permis de recenser plusieurs intrusions magmatiques, attribuées à quatre événements orogéniques anté-alpins. Des âges néoprotérozoïques (630-610 millions d'années ou Ma), cambrien inférieur (540-530 Ma), ordovicien inférieur (480-470 Ma) et carbonifère supérieur-permien inférieur (310-285 Ma) ont été obtenus dans le socle de la nappe de Sambuco. Des âges similaires à 300 Ma ont été obtenus dans la nappe voisine de la Maggia, qui permettent de relier ces deux unités. Aujourd'hui côte à côte, ces deux nappes devaient également se trouver proches l'une de l'autre il y a 300 Ma, lors de l'extension post-varisque. Les structures magmatiques spectaculaires préservées dans le pluton du Matorello (300 Ma) contraignent la géométrie actuelle de la nappe de Sambuco dans laquelle l'intrusion s'est mise en place. La forme originelle du pluton, aujourd'hui retourné et replissé plusieurs fois, s'avère être tabulaire, faite d'intrusions de faible épaisseur (1-300 m) s'étalant en forme de disque (30m à 2 km de diamètre). Les injections successives de magma se sont accumulées sous un toit dioritique précoce; elles sont issues, par le refais de fractures, d'une chambre magmatique plus profonde, périodiquement réalimentée par des magmas calco-alcalins d'origine mantellique contaminés parla croûte continentale profonde (εNd = -2.1 à -4.7). Des accumulations d'enclaves magmatiques arrondies et granoclassées dans des paléo-chenaux à fond érosif témoignent de conditions de mise en place hydrodynamiques à haute énergie. Ces enclaves sont emmenées de la chambre magmatique sous-jacente à la faveur d'épisodes de fracturation hydraulique liés à l'injection de magmas matelliques chauds dans des liquides différenciés riches en eau. Cette hypothèse est étayée par l'existence de filons composites. Une paléohorizontale a pu être déduite au sein du pluton, indiquant que cette partie de la nappe de Sambuco est verticalisée et isoclinalement replissée par la déformation alpine. Finalement, des blocs érodés du socle Sambuco ont été retrouvés dans le wildflysch sommital de la couverture sédimentaire mésozoïque de la nappe d'Antigorio sous-jacente. Ceci suggère que les blocs ont été fournis parle front de la nappe de Sambuco en train de chevaucher sur la nappe d'Antigorio au moment de la fermeture du bassin sédimentaire de cette dernière.