Geochemical and geothermal study of springs in the Ossola-Simplon Region

Geological, hydrogeological and geochemical surveys were carried out in the Piedilago area (Ossola-Simplon region) in order to investigate the geothermal resources present in this area. Following these surface exploration efforts an exploratory geothermal well of 248 m was drilled in 1991. It discharges a thermal water with temperatures up to 43 degrees C and calcium (sodium) sulphate composition with a TDS close to 1350 mg/l. Chemical geothermometers suggest a reservoir temperature close to 45 degrees C indicating that the well virtually produces the pure uncooled thermal water. The Piedilago ex-ample is here considered as the departure point to establish both general criteria for further geothermal investigations in young mountains chains and taking into consideration all the available data on geology and fluid geochemistry of thermal systems in the Ossola-Simplon region, to constrain a geothermal model for the Lower Pennine Zone.

High incidence of childhood hemolytic uremic syndrome in Switzerland is associated with indicators of livestock farming intensity

Background: Hemolytic-uremic syndrome (HUS) is a multisystem disorder associated with significant morbidity and mortality. Typically, HUS is preceded by an episode of (bloody) diarrhea mostly due to Shiga-toxin (Stx) producing Escherichia coli (STEC). The main reservoir for STEC is the intestine of healthy ruminants, mostly cattle, and recent studies have revealed an association between indicators of livestock density and human STEC infection or HUS, respectively. Nationwide data on HUS in Switzerland have been established through the Swiss Pediatric Surveillance Unit (SPSU) [Schifferli et al. Eur J Pediatr. 2010; 169:591-8]. Aims: Analysis of age-specific incidence rate of childhood HUS and possible association of Shiga-toxin associated HUS (Stx-HUS) with indicators of livestock farming intensity. Methods: Epidemiological and ecological analysis based on the SPSU data (1997-2003) and the database of the Swiss Federal Statistical Office (data on population and agriculture). Results: One hundred-fourteen cases were registered, 88% were ≤5 years old. The overall annual incidence rate was 1.42 (0.60-1.91) and 4.23 (1.76-6.19) per 100000 children ≤5 and ≤16 years, respectively (P = 0.005). Stx-HUS was more frequent compared to cases not associated with STEC (P = 0.002). The incidence rate for Stx-HUS was 3.85 (1.76-5.65) in children ≤5, compared to 0.27 (0.00-0.54) per 100'000 children 5-16 years (P = 0.002), respectively. The incidence rate of cases not associated with STEC infection did not significantly vary with age (P = 0.107). Compared to data from Scotland, Canada, Ireland, Germany, England, Australia, Italy, and Austria the annual incidence rate of HUS in young children is highest in Switzerland. Ecological analysis revealed strong association between the incidence rate of Stx-HUS and indicators of rural occupation (agricultural labourer / population, P = 0.030), farming intensity (livestock breeding farms / population, P = 0.027) and cattle density (cattle / cultivated area, P = 0.013). Conclusions: Alike in other countries, HUS in Switzerland is mostly associated with STEC infection and affects predominantly young children. However, the incidence rate is higher compared to countries abroad and is significantly correlated with indicators of livestock farming intensity. The present data support the impact of direct and indirect contact with animals or fecal contaminants in transmission of STEC to humans.

Water chemistry and isotope composition of the Acquarossa thermal system, Ticino, Switzerland

The thermal springs of Acquarossa and the nearby mineral springs of Soia have outlet temperatures of 12 degrees to 25 degrees C, TDS of 2290 to 3000 mg/kg and Ca-SO4 to Ca-SO4-HCO3 composition. Chemical geothermometers suggest reservoir temperatures close to 60 degrees C. P-CO2 values at depth are estimated to range from 0.3 to 2 bar. delta D and delta(18)O values indicate a meteoric origin and recharge elevations of 1600 +/- 150 m above sea level (a.s.l.) for these thermal and mineral waters. All these waters discharge from the overturned limb of the Simano nappe, probably dose to the contact between basement and underlying cover rocks. They therefore represent rain waters that descend slowly, heat at depth and locally rise relatively quickly to the surface, preserving part of their physical and chemical characteristics. (C) 1999 CNR. Published by Elsevier Science Ltd. All rights reserved.

Vacuum assisted venous drainage does not increase trauma to blood cells.

Although gravity drainage has been the standard technique for cardiopulmonary bypass (CPB), the development of min imally invasive techniques for cardiac surgery has renewed interest in using vacuum assisted venous drainage (VAVD) Dideco (Mirandola, Italy) has modified the D903 Avant oxygenator to apply a vacuum to its venous reservoir. The impact of VAVD on blood damage with this device is analyzed. Six calves (mean body weight, 71.3 +/- 4.1 kg) were con nected to CPB by jugular venous and carotid arterial cannu lation, with a flow rate of 4-4.51 L/min for 6 h. They were assigned to gravity drainage (standard D903 Avant oxygen ator, n = 3) or VAVD (modified D903 Avant oxygenator, n = 3). The animals were allowed to survive for 7 days. A standard battery of blood samples was taken before bypass, throughout bypass, and 24 h, 48 h, and 7 days after bypass. Analysis of variance was used for repeated measurements. Thrombocyte and white blood cell counts, corrected by hematocrit and normalized by prebypass values, were not significantly different between groups throughout all study periods. The same holds true for hemolytic parameters (lactate dehydrogenase [LDH] and plasma hemoglobin). Both peaked at 24 hr in the standard and VAVD groups: LDH, 2,845 +/- 974 IU/L vs. 2,537 +/- 476 IU/L (p = 0.65), respectively; and plasma hemoglobin, 115 +/- 31 mg/L vs. 89 +/- 455 mg/L (p = 0.45), respectively. In this experimental setup with prolonged perfusion time, VAVD does not increase trauma to blood cells in comparison with standard gravity drainage.

Amoeba/amoebal symbiont genetic transfers: lessons from giant virus neighbours.

Free-living amoebae serve as hosts for a variety of amoebae-resisting microorganisms, including giant viruses and certain bacteria. The latter include symbiotic bacteria as well as bacteria exhibiting a pathogenic phenotype towards amoebae. Amoebae-resisting bacteria have been shown to be widespread in water and to use the amoebae as a reservoir, a replication niche, a protective armour as well as a training ground to select virulence traits allowing survival in the face of microbicidal effects of macrophages, the first line of defense against invading pathogens. More importantly, amoebae play a significant role as a melting pot for genetic exchanges. These ecological and evolutionary roles of amoebae might also be at play for giant viruses and knowledge derived from the study of amoebae-resisting bacteria is useful for the study and understanding of interactions between amoebae and giant viruses. This is especially important since some genes have spread in all domains of life and the exponential availability of eukaryotic genomes and metagenomic sequences will allow researchers to explore these genetic exchanges in a more comprehensive way, thus completely changing our perception of the evolutionary history of organisms. Thus, a large part of this review is dedicated to report current known gene exchanges between the different amoebae-resisting organisms and between amoebae and the internalized bacteria.

Parachlamydia acanthamoebae, an emerging agent of pneumonia.

Parachlamydia acanthamoebae is a Chlamydia-like organism that easily grows within Acanthamoeba spp. Thus, it probably uses these widespread free-living amoebae as a replicative niche, a cosmopolite aquatic reservoir and a vector. A potential role of P. acanthamoebae as an agent of lower respiratory tract infection was initially suggested by its isolation within an Acanthamoeba sp. recovered from the water of a humidifier during the investigation of an outbreak of fever. Additional serological and molecular-based investigations further supported its pathogenic role, mainly in bronchiolitis, bronchitis, aspiration pneumonia and community-acquired pneumonia. P. acanthamoebae was shown to survive and replicate within human macrophages, lung fibroblasts and pneumocytes. Moreover, this strict intracellular bacterium also causes severe pneumonia in experimentally infected mice, thus fulfilling the third and fourth Koch criteria for a pathogenic role. Consequently, new tools have been developed for the diagnosis of parachlamydial infections. It will be important to routinely search for this emerging agent of pneumonia, as P. acanthamoebae is apparently resistant to quinolones, which are antibiotics often used for the empirical treatment of atypical pneumonia. Other Chlamydia-related bacteria, including Protochlamydia naegleriophila, Simkania negevensis and Waddlia chondrophila, might also cause lung infections. Moreover, several additional novel chlamydiae, e.g. Criblamydia sequanensis and Rhabdochlamydia crassificans, have been discovered and are now being investigated for their human pathogenicity.

Role and regulation of polyphosphate in leishmania parasites

Le protozoaire unicellulaire Leishmania est l'agent responsable de la leishmaniose, une maladie parasitaire humaine qui se manifeste par des lésions de la peau, se résolvant le plus souvent spontanément, jusqu'à des lésions viscérales fatales. Le parasite est transmis de l'insecte à l'hôte mammifère lors d'un repas sanguin de la mouche des sables et y réside respectivement sous formes extra- et intracellulaires. On estime que cette maladie touche environ 12 millions de personnes dans 98 pays. Etant donné que les médicaments disponibles à ce jour sont faiblement efficaces et/ou hautement toxiques, il est indispensable de consolider les connaissances sur le fonctionnement et la survie du parasite pour pouvoir développer de nouvelles stratégies de traitements et de préventions. Tous les organismes vivants, dont Leishmania, contiennent du polyphopshate (polyP). Cette molécule chargée négativement est constituée de trois jusqu'à plusieurs centaines de résidus de phosphates reliées par des liaisons à haute énergie. Le polyP sert donc de source d'énergie et de réservoir de phosphate; dans certaines espèces, il joue aussi un rôle dans l'adaptation au stress et la virulence de pathogènes. Ceci nous a amené à étudier le rôle du polyP dans le parasite Leishmania. L'enzyme responsable de la synthèse de polyP a été identifié récemment dans la levure : il s'agit de la chaperone de transport vacuolaire 4 (Vtc4). Nous avons identifié un homologue de Vtc4 chez les Trypanosomatidae, et avons donc décidé d'examiner sa fonction dans le métabolisme du polyP chez Leishmania. En éliminant l'expression de Vtc4 chez L. major et L. guyanensis, nous avons pu démontrer qu'il est indispensable pour la production de polyP chez Leishmania. De plus, nous avons constaté que ces parasites possèdent des chaînes de polyP allant de trois jusqu'à environ 300 résidus de phosphate. Le taux de polyP dans la cellule est précisément régulé et varie entre un très haut niveau durant la phase proliférative des promastigotes à un niveau bas en phase stationnaire tardive, alors que l'expression de Vtc4p reste stable. Dans les amastigotes intracellulaires, seulement des petites quantités de polyP et de Vtc4p sont détectées. En outre, l'absence de Vc4p et de polyP n'a pas d'effet significatif sur les infections in vivo de souris, ce qui indique que le polyP n'est pas nécessaire au développement de la leishmaniose. Ceci suggère que Vtc4p n 'est pas une bonne cible pour le développement de nouveaux traitements contre Leishmania. "Néanmoins, la présence du polyP favorise fortement la survie du parasite suite à un choc de température (37°C) et aide ainsi à sa persistance intracellulaire pendant les premiers jours d'infection de macrophages. En résumé, nos résultats indiquent que si le polyP a peu d'importance pendant l'infection et le développement de la leishmaniose chez la souris, il est par contre crucial pour l'adaptation à des situations de stress comme l'augmentation de la température. Le fait que le polyP a été conservé dans tous les organismes durant l'évolution suggère toutefois que cette molécule joue un rôle fondamental. Etant donné que l'absence de polyP n'a pas d'effet sur la survie des amastigotes, il pourrait être plus important dans la forme promastigote infectant la mouche des sables. - The unicellular protozoan parasite Leishmania is the causative agent of the human disease leishmaniasis, which can range from self-healing skin lesions to fatal visceral lesions. The parasite is transmitted from the insect vector to the mammalian host when the sand fly takes its blood meal and exists in an extra- and an intracellular form, respectively. The disease is estimated to affect 12 million people in 98 countries and currently available drug treatments are of relatively low potency and/or high toxicity. Thus, investigating parasite survival mechanisms and parasite adaptation to the two host environments contributes to the general understanding of Leishmania propagation and might therefore help to develop future treatments or preventions. All living cells, including Leishmania, contain a negatively charged polymer of a few up to several hundred phosphate residues. These so-called polyphosphates (polyPs) serve as an energy source and phosphate reservoir. In some organisms, polyP is also involved in adaptation to stresses and virulence of pathogens. Therefore we were interested in investigating the importance of polyP in Leishmania parasites. Recently, an eukaryotic enzyme responsible for polyP synthesis has been identified as the vacuolar transporter chaperone 4 (Vtc4) in yeast. We, and others, found a Vtc4 homologue in trypanosomatids and decided to examine its potential function in polyP metabolism. By generating VTC4 knock-out cell lines in L. major and Vtc4 knock-down cell lines in L. guyanensis, we were able to demonstrate that Vtc4p is responsible for the total amount of cellular polyP. We also observed that Leishmania polyP chain length ranges from a few up to around 300 residues and that its level is tightly regulated. PolyP abundance is highest during the logarithmic proliferating phase of promastigotes and decreases in the stationary phase, while Vtc4 protein expression remains stable during both phases. In the intracellular amastigote form, only low amounts of polyP and Vtc4p were detectable. Furthermore, absence of Vtc4p and polyP did not have a significant effect on in vivo mouse infections, indicating that polyP is not necessary for Leishmania disease progression. This suggests that Vtc4p would be a poor drug target against Leishmania infection. However, presence of the polymer strongly supported parasite survival during heat shock (37°C) and thereby promoted intracellular persistence during the first days of macrophage infections. Taken together, we found that polyP has little importance in Leishmania {in vivo) infection but that it plays a crucial role during adaptation to stress, such as heat shock. Given that polyP has been preciously conserved in all organisms during evolution it seems to play a fundamental role. Since absence of polyP does not affect amastigote survival, it might be significant for promastigote existence in the sand fly vector.

3D seismic facies characterization and geological patterns recognition (Australian North West Shelf)

EXECUTIVE SUMMARY This PhD research, funded by the Swiss Sciences Foundation, is principally devoted to enhance the recognition, the visualisation and the characterization of geobodies through innovative 3D seismic approaches. A series of case studies from the Australian North West Shelf ensures the development of reproducible integrated 3D workflows and gives new insight into local and regional stratigraphic as well as structural issues. This project was initiated in year 2000 at the Geology and Palaeontology Institute of the University of Lausanne (Switzerland). Several collaborations ensured the improvement of technical approaches as well as the assessment of geological models. - Investigations into the Timor Sea structural style were carried out at the Tectonics Special Research Centre of the University of Western Australia and in collaboration with Woodside Energy in Perth. - Seismic analysis and attributes classification approach were initiated with Schlumberger Oilfield Australia in Perth; assessments and enhancements of the integrated seismic approaches benefited from collaborations with scientists from Schlumberger Stavanger Research (Norway). Adapting and refining from "linear" exploration techniques, a conceptual "helical" 3D seismic approach has been developed. In order to investigate specific geological issues this approach, integrating seismic attributes and visualisation tools, has been refined and adjusted leading to the development of two specific workflows: - A stratigraphic workflow focused on the recognition of geobodies and the characterization of depositional systems. Additionally, it can support the modelling of the subsidence and incidentally the constraint of the hydrocarbon maturity of a given area. - A structural workflow used to quickly and accurately define major and secondary fault systems. The integration of the 3D structural interpretation results ensures the analysis of the fault networks kinematics which can affect hydrocarbon trapping mechanisms. The application of these integrated workflows brings new insight into two complex settings on the Australian North West Shelf and ensures the definition of astonishing stratigraphic and structural outcomes. The stratigraphic workflow ensures the 3D characterization of the Late Palaeozoic glacial depositional system on the Mermaid Nose (Dampier Subbasin, Northern Carnarvon Basin) that presents similarities with the glacial facies along the Neotethys margin up to Oman (chapter 3.1). A subsidence model reveals the Phanerozoic geodynamic evolution of this area (chapter 3.2) and emphasizes two distinct mode of regional extension for the Palaeozoic (Neotethys opening) and Mesozoic (abyssal plains opening). The structural workflow is used for the definition of the structural evolution of the Laminaria High area (Bonaparte Basin). Following a regional structural characterization of the Timor Sea (chapter 4.1), a thorough analysis of the Mesozoic fault architecture reveals a local rotation of the stress field and the development of reverse structures (flower structures) in extensional setting, that form potential hydrocarbon traps (chapter 4.2). The definition of the complex Neogene structural architecture associated with the fault kinematic analysis and a plate flexure model (chapter 4.3) suggest that the Miocene to Pleistocene reactivation phases recorded at the Laminaria High most probably result from the oblique normal reactivation of the underlying Mesozoic fault planes. This episode is associated with the deformation of the subducting Australian plate. Based on these results three papers were published in international journals and two additional publications will be submitted. Additionally this research led to several communications in international conferences. Although the different workflows presented in this research have been primarily developed and used for the analysis of specific stratigraphic and structural geobodies on the Australian North West Shelf, similar integrated 3D seismic approaches will have applications to hydrocarbon exploration and production phases; for instance increasing the recognition of potential source rocks, secondary migration pathways, additional traps or reservoir breaching mechanisms. The new elements brought by this research further highlight that 3D seismic data contains a tremendous amount of hidden geological information waiting to be revealed and that will undoubtedly bring new insight into depositional systems, structural evolution and geohistory of the areas reputed being explored and constrained and other yet to be constrained. The further development of 3D texture attributes highlighting specific features of the seismic signal, the integration of quantitative analysis for stratigraphic and structural processes, the automation of the interpretation workflow as well as the formal definition of "seismo-morphologic" characteristics of a wide range of geobodies from various environments would represent challenging examples of continuation of this present research. The 21st century will most probably represent a transition period between fossil and other alternative energies. The next generation of seismic interpreters prospecting for hydrocarbon will undoubtedly face new challenges mostly due to the shortage of obvious and easy targets. They will probably have to keep on integrating techniques and geological processes in order to further capitalise the seismic data for new potentials definition. Imagination and creativity will most certainly be among the most important quality required from such geoscientists.

Modeling complex wells with the multi-scale finite-volume method

In this paper, an extension of the multi-scale finite-volume (MSFV) method is devised, which allows to Simulate flow and transport in reservoirs with complex well configurations. The new framework fits nicely into the data Structure of the original MSFV method,and has the important property that large patches covering the whole well are not required. For each well. an additional degree of freedom is introduced. While the treatment of pressure-constraint wells is trivial (the well-bore reference pressure is explicitly specified), additional equations have to be solved to obtain the unknown well-bore pressure of rate-constraint wells. Numerical Simulations of test cases with multiple complex wells demonstrate the ability of the new algorithm to capture the interference between the various wells and the reservoir accurately. (c) 2008 Elsevier Inc. All rights reserved.

Venous cannula performance assessment in a realistic caval tree model.

OBJECTIVES: A new caval tree system was designed for realistic in vitro simulation. The objective of our study was to assess cannula performance for virtually wall-less versus standard percutaneous thin-walled venous cannulas in a setting of venous collapse in case of negative pressure. METHODS: For a collapsible caval model, a very flexible plastic material was selected, and a model with nine afferent veins was designed according to the anatomy of the vena cava. A flow bench was built including a lower reservoir holding the caval tree, built by taking into account the main afferent vessels and their flow provided by a reservoir 6 cm above. A cannula was inserted in this caval tree and connected to a centrifugal pump that, in turn, was connected to a reservoir positioned 83 cm above the second lower reservoir (after-load = 60 mmHg). Using the same pre-load, the simulated venous drainage for cardiopulmonary bypass was realized using a 24 F wall-less cannula (Smartcanula) and 25 F percutaneous cannula (Biomedicus), and stepwise increased augmentation (1500 RPM, 2000 and 2500 RPM) of venous drainage. RESULTS: For the thin wall and the wall-less cannulas, 36 pairs of flow and pressure measurements were realized for three different RPM values. The mean Q-values at 1500, 2000 and 2500 RPM were: 3.98 ± 0.01, 6.27 ± 0.02 and 9.81 ± 0.02 l/min for the wall-less cannula (P <0.0001), versus 2.74 ± 0.02, 3.06 ± 0.05, 6.78 ± 0.02 l/min for the thin-wall cannula (P <0.0001). The corresponding inlet pressure values were: -8.88 ± 0.01, -23.69 ± 0.81 and -70.22 ± 0.18 mmHg for the wall-less cannula (P <0.0001), versus -36.69 ± 1.88, -80.85 ± 1.71 and -101.83 ± 0.45 mmHg for the thin-wall cannula (P <0.0001). The thin-wall cannula showed mean Q-values 37% less and mean P values 26% more when compared with the wall-less cannula (P <0.0001). CONCLUSIONS: Our in vitro water test was able to mimic a negative pressure situation, where the wall-less cannula design performs better compared with the traditional thin-wall cannula.

Formation continue: comment concilier devoir et besoins [Continuing education: how to reconcile needs and wants]

La formation continue fait à l'évidence partie intégrante de la vie du médecin, elle est non seulement un devoir éthique envers les patients mais également l'expression du besoin de se maintenir «à la page» dans sa pratique quotidienne, conséquence des progrès rapides en médecine, particulièrement en oncologie médicale. Elle peut être également source de plaisir quand il s'agit d'accroître ses connaissances. Ses règles minimales ont été définies depuis plusieurs années par la FMH qui délègue aux sociétés de disciplines son application pratique. En 2008, une révision nécessaire pour différentes raisons a facilité le calcul des crédits. Même si le total des heures de formation est resté le même (50 crédits), il a été partagé par deux : 25 pour la formation spécifique et 25 qui peuvent être acquis dans une autre discipline (révision de mars 2009 du Règlement pour la formation continue, art. 5a). Cette révision n'a pas réjoui toutes les sociétés de spécialistes qui gardent la faculté de revoir à la hausse le minimum jugé nécessaire à leur discipline. La quantité des offres de formation continue pour les médecins pose le problème d'être proprement pléthorique (congrès nationaux et internationaux, e-learning, symposiums locaux, etc.), il n'en va pas de même de leur qualité. Dans le domaine de l'oncologie médicale, les offres sont abondantes dans un contexte de marketing évident : les maisons pharmaceutiques parrainent des réunions avec un orateur mercenaire, prestigieux si possible, invité à vanter un produit spécifique dans un cycle de présentations en différents lieux de Romandie (avec à chaque fois, la possibilité d'inscrire des crédits à l'actif des participants)... Elles soutiennent également, par leur logistique, de miniconférences organisées par les différentes institutions locales et auxquelles les médecins ne participent que de façon sporadique vu leur intérêt souvent très secondaire - il n'est pas rare que l'auditoire médical se résume à cinq ou dix participants. Au final, ces offres dispersées et de qualité discutable monopolisent les ressources qui se raréfient rapidement dans le contexte économique actuel et qui doivent impérativement être utilisées de manière plus judicieuse, notamment en évitant les manifestations répétitives. Devant toutes ces offres, il est souvent difficile pour la société de discipline de séparer le bon grain de l'ivraie et en conséquence d'attribuer de manière objective les crédits de formation. Partant de ce constat, un petit groupe romand de médecins oncologues praticiens installés et des centres universitaires ont réfléchi à l'idée de regrouper au sein d'une seule structure romande l'organisation d'une formation continue qui réponde à la fois aux besoins et à l'exigence de qualité. Ses tâches sont multiples : mettre sur pied annuellement plusieurs demi-journées de formation, préaviser avec un comité scientifique de la qualité de la formation continue distillée sur son territoire de compétence (sans empiéter sur les prérogatives de la commission pour la formation postgraduée de la Société suisse d'oncologie médicale - SSOM) en rapprochant les centres universitaires, les hôpitaux cantonaux et régionaux, et les praticiens. Ainsi est née l'association FoROMe (Formation romande en oncologie médicale). Sa légitimité a été établie par la SSOM et par le Comité pour la formation postgraduée et continue (nouvellement SIWF) de la FMH. Elle est maintenant en mesure de mettre en application les tâches pour lesquelles elle a été constituée. Il est évident que cela n'ira pas sans résistance et que certains diront qu'ils ne voient pas la nécessité d'une structure supplémentaire, que les sociétés de disciplines font très bien leur travail, qu'il s'agit encore là d'une atteinte à la liberté. Cependant les nécessités économiques vont tôt ou tard venir au secours de la logique pour confirmer les changements que cette démarche a permis d'anticiper. A l'avenir, il s'agira d'assurer le bien-fondé de cette initiative et de rester vigilant au bon fonctionnement de cette structure à la satisfaction de nos membres.

Uncertainty Quantification with Support Vector Regression Prediction Models

Uncertainty quantification of petroleum reservoir models is one of the present challenges, which is usually approached with a wide range of geostatistical tools linked with statistical optimisation or/and inference algorithms. The paper considers a data driven approach in modelling uncertainty in spatial predictions. Proposed semi-supervised Support Vector Regression (SVR) model has demonstrated its capability to represent realistic features and describe stochastic variability and non-uniqueness of spatial properties. It is able to capture and preserve key spatial dependencies such as connectivity, which is often difficult to achieve with two-point geostatistical models. Semi-supervised SVR is designed to integrate various kinds of conditioning data and learn dependences from them. A stochastic semi-supervised SVR model is integrated into a Bayesian framework to quantify uncertainty with multiple models fitted to dynamic observations. The developed approach is illustrated with a reservoir case study. The resulting probabilistic production forecasts are described by uncertainty envelopes.

Numerical analysis of wave-induced fluid flow effects on seismic data: Application to monitoring of CO2 storage at the Sleipner Field

In this work we analyze how patchy distributions of CO2 and brine within sand reservoirs may lead to significant attenuation and velocity dispersion effects, which in turn may have a profound impact on surface seismic data. The ultimate goal of this paper is to contribute to the understanding of these processes within the framework of the seismic monitoring of CO2 sequestration, a key strategy to mitigate global warming. We first carry out a Monte Carlo analysis to study the statistical behavior of attenuation and velocity dispersion of compressional waves traveling through rocks with properties similar to those at the Utsira Sand, Sleipner field, containing quasi-fractal patchy distributions of CO2 and brine. These results show that the mean patch size and CO2 saturation play key roles in the observed wave-induced fluid flow effects. The latter can be remarkably important when CO2 concentrations are low and mean patch sizes are relatively large. To analyze these effects on the corresponding surface seismic data, we perform numerical simulations of wave propagation considering reservoir models and CO2 accumulation patterns similar to the CO2 injection site in the Sleipner field. These numerical experiments suggest that wave-induced fluid flow effects may produce changes in the reservoir's seismic response, modifying significantly the main seismic attributes usually employed in the characterization of these environments. Consequently, the determination of the nature of the fluid distributions as well as the proper modeling of the seismic data constitute important aspects that should not be ignored in the seismic monitoring of CO2 sequestration problems.

Penicillin-binding protein gene alterations in Streptococcus uberis isolates presenting decreased susceptibility to penicillin.

Streptococcus uberis is an environmental pathogen commonly causing bovine mastitis, an infection that is generally treated with penicillin G. No field case of true penicillin-resistant S. uberis (MIC &gt; 16 mg/liter) has been described yet, but isolates presenting decreased susceptibility (MIC of 0.25 to 0.5 mg/liter) to this drug are regularly reported to our laboratory. In this study, we demonstrated that S. uberis can readily develop penicillin resistance in laboratory-evolved mutants. The molecular mechanism of resistance (acquisition of mutations in penicillin-binding protein 1A [PBP1A], PBP2B, and PBP2X) was generally similar to that of all other penicillin-resistant streptococci described so far. In addition, it was also specific to S. uberis in that independent resistant mutants carried a unique set of seven consensus mutations, of which only one (Q(554)E in PBP2X) was commonly found in other streptococci. In parallel, independent isolates from bovine mastitis with different geographical origins (France, Holland, and Switzerland) and presenting a decreased susceptibility to penicillin were characterized. No mosaic PBPs were detected, but they all presented mutations identical to the one found in the laboratory-evolved mutants. This indicates that penicillin resistance development in S. uberis might follow a stringent pathway that would explain, in addition to the ecological niche of this pathogen, why naturally occurring resistances are still rare. In addition, this study shows that there is a reservoir of mutated PBPs in animals, which might be exchanged with other streptococci, such as Streptococcus agalactiae, that could potentially be transmitted to humans.

Geomodelling of a fluvial system with semi-supervised support vector regression

Fluvial deposits are a challenge for modelling flow in sub-surface reservoirs. Connectivity and continuity of permeable bodies have a major impact on fluid flow in porous media. Contemporary object-based and multipoint statistics methods face a problem of robust representation of connected structures. An alternative approach to model petrophysical properties is based on machine learning algorithm ? Support Vector Regression (SVR). Semi-supervised SVR is able to establish spatial connectivity taking into account the prior knowledge on natural similarities. SVR as a learning algorithm is robust to noise and captures dependencies from all available data. Semi-supervised SVR applied to a synthetic fluvial reservoir demonstrated robust results, which are well matched to the flow performance