Partial cricotracheal resection for severe pediatric subglottic stenosis: update of the Lausanne experience.

Until recently, severe pediatric subglottic stenosis (SGS) has been treated almost exclusively by laryngotracheoplasty procedures. Even in the most experienced centers, the results of single-stage operations for Cotton's grade III and IV stenoses have been disappointing. This paper reports our experience on 31 partial cricotracheal resections for severe SGS in infants and children. The stenosis was congenital in 6 cases and acquired after prolonged intubation in 25 cases. Twenty-seven patients were tracheotomy-dependent at the time of surgery. Twenty-two cases were classified as grade III and 9 cases as grade IV stenoses according to Cotton. The decannulation rate was 97% (30 of 31 cases) after an open procedure. There were no fatalities and no lesions to the recurrent laryngeal nerves, but there was 1 complete restenosis. Twenty-seven patients show no exertional dyspnea, 3 have a slight stridor with some dyspnea while exercising, and 1 patient is not decannulated. The voice is normal in 21 cases, a dysphonia is present in 9 cases, and the patient with complete restenosis acquired an esophageal voice. Postoperative follow-up is longer than 10 years in 8 cases and longer than 5 years in an additional 6 cases. All patients who reached adulthood show normal growth of the larynx and trachea. Considering the excellent results obtained in this consecutive series of 31 cases, partial cricoid resection with primary thyrotracheal anastomosis should be considered an important treatment option for severe SGS in infants and children.

The Oman exotics : a key to the understanding of the Neotethyan geodynamic evolution

The study of the exotic blocks of the Hawasina Nappes (Sultanate of Oman) leads to give apposit data that allow us to propose a new paleogeographic evolution of the Oman margin in time and space. A revised classification of exotic blocks into different paleogeographical units is presented. Two newly introduced stratigraphic groups, the Ramaq Group (Ordovician to Triassic) and the Al Buda'ah Group (upper Permian to Jurassic) are interpreted as tilted blocks related to the Oman continental margin. The Kawr Group (middle Triassic to Cretaceous) is redefined and interpreted as an atoll-type seamount. The paleogeography and paleoenvironments of these units are integrated into a new scheme of the Neotethyan rifting history. Brecciae and olisto¬liths of the Hawasina series are interpreted to have originated from tectonic movements affecting the Oman margin and the Neotethyan ocean floor. The breccias of late Permian age were generated by the extension processes affecting the margin, and by the creation of the Neotethyan oceanic floor. The breccias of mid-late Triassic age coincide in time with the collision of the Cimmerian continents with Eurasia. In constrast, the breccias of late Jurassic and Cretaceous age are interpreted as resulting to the creation of a new oceanic crust (Semail) off the Oman margin

Time constant of the cerebral arterial bed in normal subjects.

The time constant of cerebral arterial bed (in brief time constant) is a product of brain arterial compliance (C(a)) and resistance (CVR). We tested the hypothesis that in normal subjects, changes in end-tidal CO(2) (EtCO(2)) affect the value of the time constant. C(a) and CVR were estimated using mathematical transformations of arterial pressure (ABP) and transcranial Doppler (TCD) cerebral blood flow velocity waveforms. Responses of the time constant to controlled changes in EtCO(2) were compared in 34 young volunteers. Hypercapnia shortened the time constant (0.22 s [0.17, 0.26] vs. 0.16 s [0.13, 0.20]; p = 0.000001), while hypocapnia lengthened the time constant (0.22 s [0.17, 0.26] vs. 0.23 s [0.19, 0.32]; p < 0.0032). The time constant was negatively correlated with changes in EtCO(2) (R(partial) = -0.68, p < 0.000001). This was associated with a decrease in CVR when EtCO(2) increased (R(partial) = -0.80, p < 0.000001) and C(a) remained independent of changes in EtCO(2). C(a) was negatively correlated with mean ABP (R(partial) = -0.68, p < 0.000001). In summary, the time constant shortens with increasing EtCO(2). Its potential role in cerebrovascular investigations needs further studies.

The contribution of the young Cretaceous Caribbean Oceanic Plateau to the genesis of late Cretaceous arc magmatism in the Cordillera Occidental of Ecuador

The eastern part of the Cordillera Occidental of Ecuador comprises thick buoyant oceanic plateaus associated with island-arc tholeiites and subduction-related calc-alkaline series, accreted to the Ecuadorian Continental Margin from Late Cretaceous to Eocene times. One of these plateau sequences, the Guaranda Oceanic Plateau is considered as remnant of the Caribbean-Colombian Oceanic Province (CCOP) accreted to the Ecuadorian Margin in the Maastrichtien. Samples studied in this paper were taken from four cross-sections through two arc-sequences in the northern part of the Cordillera Occidental of Ecuador, dated as (Rio Cala) or ascribed to (Macuchi) the Late Cretaceous and one arc-like sequence in the Chogon-Colonche Cordillera (Las Orquideas). These three island-arcs can clearly be identified and rest conformably on the CCOP. In all four localities, basalts with abundant large clinopyroxene phenocrysts can be found, mimicking a picritic or ankaramitic facies. This mineralogical particularity, although not uncommon in island arc lavas, hints at a contribution of the CCOP in the genesis of these island arc rocks. The complete petrological and geochemical study of these rocks reveals that some have a primitive island-arc nature (MgO values range from 6 to 11 wt.%). Studied samples display marked Nb, Ta and Ti negative anomalies relative to the adjacent elements in the spidergrams characteristic of subductionrelated magmatism. These rocks are LREE-enriched and their clinopyroxenes show a tholeiitic affinity (FeO(1)-TiO(2) enrichment and CaO depletion from core to rim within a single crystal). The four sampled cross-sections through the island-arc sequences display homogeneous initial Nd, and Pb isotope ratios that suggest a unique mantellic source for these rocks resulting from the mixing of three components: an East-Pacific MORB end-member, an enriched pelagic sediment component, and a HIMU component carried by the CCOP. Indeed, the ankaramite and Mg-basalt sequences that form part of the Caribbean-Colombian Oceanic Plateau are radiogenically enriched in (206)Pb/(204)Pb and (207)Pb/(204)Pb and contain a HIMU component similar to that observed in the Gorgona basalts and Galapagos lavas. The subduction zone that generated the Late Cretaceous arcs occurred far from the continental margin, in an oceanic environment. This implies that no terrigenous detrital sediments interacted with the source at this period. Thus, the enriched component can only result from the melting of subducted pelagic sediments. We have thus defined the East-Pacific MORB, enriched (cherts, pelagic sediments) and HIMU components in an attempt to constrain and model the genesis of the studied island-arc magmatism, using a compilation of carefully selected isotopic data from literature according to rock age and paleogeographic location at the time of arc edification. Tripolar mixing models reveal that proportions of 12-15 wt.% of the HIMU component, 7-15 wt.% of the pelagic sediment end-member and 70-75 wt.% of an East-pacific MORB end-member are needed to explain the measured isotope ratios. These surprisingly high proportions of the HIMU/CCOP component could be explained by the young age of the oceanic plateau (5-15 Ma) during the Late Cretaceous arc emplacement. The CCOP, basement of these arc sequences, was probably still hot and easily assimilated at the island-arc lava source. (C) 2008 Elsevier Ltd. All rights reserved,

Incremental growth of the Patagonian Torres del Paine laccolith over 90 k.y.

The Miocene Paine Granite in the Torres del Paine Intrusive Complex, southern Chile, is an extraordinary example of an upper crustal mafic and granitic intrusion. The granite intruded as a series of three sheets, each one underplating the previous sheet along the top of the basal Paine Mafic Complex. High-precision U/Pb geochronology on single zircons using isotope dilution-thermal ionization mass spectrometry yields distinct ages of 12.59 +/- 0.02 Ma and 12.50 +/- 0.02 Ma, respectively, for the first and last sheet of the laccolith. This age relationship is consistent with field observations. The zircon ages define a time frame of 90 +/- 40 k.y. for the emplacement of a >2000-m-thick granite laccollith. These precise U-Pb zircon ages permit identification of the pulses in a 20 k.y. range. The data obtained for the Paine Granite fill the gap between 100 k.y. and 100-1000 yr pulses described in the literature for crustal magma chambers.

The Palaeozoic metamorphic evolution of the Alpine External Massifs

The pre-Mesozoic metamorphic pattern of the External Massifs, composed of subunits of different metamorphic histories, resulted from the telescoping of Variscan, Ordovician and older metamorphic and structural textures and formations. During an early period, the future External Massifs were part of a peri-Gondwanian microplate evolving as an active margin. Precambrian to lower Palaeozoic igneous and sedimentary protoliths were reworked during an Ordovician subduction cycle (eclogites, granulites) preceding Ordovician anatexis and intrusion of Ordovician granitoids. Little is known about the time period when the microcontinent containing the future External Massifs followed a migration path leading to collision with Laurussia. Corresponding rock-series have not been identified. This might be because they have been eroded or transformed by migmatisation or because they remain hidden in the monocyclic areas. Besides the transformations which originated during the Ordovician subduction cycle, strong metamorphic transformations resulted from Variscan collision when many areas underwent amphibolite facies transformations and migmatisation. The different subunits composing the External Massifs and their corresponding P-T evolution are the expression of different levels in a nappe pile, which may have formed before Visean erosion and cooling. The presence of durbachitic magmatic rocks may be the expression of a large scale Early Variscan upwelling line which formed after Variscan lithospheric subduction. Late Variscan wrench fault tectonics and crustal thinning accompanied by high thermal gradients triggered several pulses of granite intrusions.

Infection of the central nervous system caused by varicella zoster virus reactivation: a retrospective case series study.

BACKGROUND: Recent data suggest that varicella zoster virus (VZV)-associated complications of the central nervous system (CNS) are more common and diverse than previously thought. The main purpose of this article is to describe the clinical characteristics and the outcome of patients suffering from meningitis and encephalitis caused by VZV reactivation. METHODS: A retrospective case study of adult patients (≥16 years old) diagnosed with a VZV reactivation in the CNS was performed. The cases were identified by a qualitative PCR DNA assay of the cerebrospinal fluid (CSF) at the Regional Hospital of Lugano between January 1, 2003 and July 31, 2010. RESULTS: Eleven out of 519 CSF samples (2.1%), submitted from patients with a clinical diagnosis of viral meningitis or encephalitis, were positive for VZV. A vesiculo-pustular skin eruption was observed in only five patients (45%). In six cases (55%), a systemic inflammatory syndrome was absent. The clinical outcome was favorable in eight patients (73%). Only one out of 11 patients (9%) died. The four patients with encephalitis had a less favorable prognosis: one patient recovered without residual neurological sequelae; two had a chronic neuropsychological handicap, speech difficulties, facial nerve palsy, and focal seizures; one patient died. We estimated an annual incidence rate of VZV infection of the CNS of 1.02/100 000 inhabitants for southern Switzerland. CONCLUSIONS: Screening of CSF for VZV by PCR is recommended for all patients with encephalitis and for those with viral meningitis of unclear origin in order to better target antiviral treatment.

Quantification of the local heartwall motion by magnetic resonance myocardial tagging.

Sophisticated magnetic resonance tagging techniques provide powerful tools for the non-invasive assessment of the local heartwall motion towards a deeper fundamental understanding of local heart function. For the extraction of motion data from the time series of magnetic resonance tagged images and for the visualization of the local heartwall motion a new image analysis procedure has been developed. New parameters have been derived which allows quantification of the motion patterns and are highly sensitive to any changes in these patterns. The new procedure has been applied for heart motion analysis in healthy volunteers and in patient collectives with different heart diseases. The achieved results are summarized and discussed.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Epibulbar osseous choristoma: a clinicopathological case series and review of the literature [Epibulbäre knöcherne Choristome: eine klinisch-pathologische Fallserie und Überblick der Literatur]

BACKGROUND: Choristomas are benign, congenital tumours composed of normal tissue in an abnormal location. Osseous choristomas represent the rarest form of epibulbar choristomas, with now 65 cases reported in the literature. We did a retrospective clinicopathological study of all patients with epibulbar osseous choristoma observed at our institution since 1982 and updated the last review of the literature. HISTORY AND SIGNS: Three Caucasian male patients, aged between 3 months and 11 years, were identified. All osseous choristomas were located under the superotemporal bulbar conjunctiva of the right eye. THERAPY AND OUTCOME: All lesions were managed with surgical excision. Histopathology revealed the presence of lamellar bone in all cases, one of which was associated with a dermolipoma. CONCLUSIONS: We report a small rare case series of 3 epibulbar osseous choristomas and did a review of the literature. In one patient, the osteoma was associated with a dermolipoma, corresponding to the fourth reported complex choristoma of this type, in an otherwise normal eye, in the literature.

Patterns of failure and outcome in patients with carcinoma of the anal margin.

BACKGROUND: To evaluate the outcome of patients with carcinoma of anal margin in terms of recurrence, survival, and radiation toxicity. METHODS: A series of 45 consecutive patients, with anal margin carcinoma treated between 1983 and 2006 with curative intent at two institutions, was retrospectively analyzed. A surgical excision (close or positive surgical margin in 22 out of 29 patients) was realized before radiotherapy (RT). RT consisted of definitive external beam RT (EBRT) in 36 patients, brachytherapy (BT) alone in two patients, and both BT and EBRT in seven patients. The median total radiation dose was 59.4 Gy (range, 30-74 Gy). RESULTS: The 5-year locoregional control (LRC) rate was 78% [95% confidence interval (CI), 64-93%]. The 5-year disease-specific survival (DSS) and overall survival (OS) rates were respectively 86% (95% CI, 72-99%) and 55% (95% CI, 44-66%). The overall anal conservation rate was 80% for the whole series. There was no significant association between local recurrence and patient age, histological grade, tumor size, T stage, overall treatment time, RT dose, or chemotherapy. Long-term side effects were observed in 15 patients (33%). Only three patients developed grade 3-4 late toxicity (CTCAE/NCI v3.0). Significant relationship was found between dose, and complication rate (48% for dose >or=59.4 Gy versus 8% for dose < 59.4 Gy; P = 0.03). CONCLUSIONS: We conclude that definitive RT and/or BT yield a good local control and disease-specific survival comparable with published data. This study suggests that radiation dose over 59.4 Gy seems to increase treatment-related morbidity.