Well-being and the frailty process in later life: an evaluation of the effectiveness of downward social comparison

This article, which is based on a longitudinal study conducted with a cohort ofoctogenarians, examines downward social comparison and its effectiveness as an adjustment mechanism during the frailty process. First of all, a paradoxical stability of subjective well-being is to be observed: it remains stable over five years notwithstanding the general decline in health. Next, an analysis based on individual health trajectories reveals that downward social comparison is associated with the maintenance of a stable level of well-being, whereas, when it is not associated with well-being, the latter tends to vary.

Evaluation de l'efficacite antihypertensive de l'isradipine SRO par enregistrement tensionnel en ambulatoire. [Evaluation of the antihypertensive efficacy of isradipine SRO as assessed by ambulatory blood pressure determination]

The calcium channel blocker isradipine has become recently available in a form with delayed release (isradipine SRO). The anti-hypertensive efficacy and tolerance of this preparation at a single daily dose of 5 mg was studied in 40 patients with uncomplicated essential hypertension over a period of 6 weeks. Blood pressure during office visits decreased under Isradipine SRO from 164/105 +/- 16/7 to 144/93 +/- 12/7 mmHg (mean +/- 1 standard deviation p < 0.001). Using ambulatory blood pressure recording we could show that antihypertensive efficacy of the new galenic form persisted over 24 hours. During the day the blood pressure dropped from 150/95 +/- 13/7 to 141/91 +/- 13/7 mmHg (p < 0.001), during the night from 131/85 +/- 13/3 to 121/81 +/- 15/9 mmHg (p < 0.001). Heart-rate was not changed by treatment and the drug was well tolerated. Isradipine SRO at a single dose is thus well suited for antihypertensive treatment.

Evaluation of the interactions between multiwalled carbon nanotubes and caco-2 cells

The aim of this study was to determine whether multiwalled carbon nanotubes (MWNCT) are taken up by and are toxic to human intestinal enterocytes using the Caco-2 cell model. Caco-2 cells were exposed to 50 ?g/ml MWCNT (oxidized or pristine) for 24 h, and experiments were repeated in the presence of 2.5 mg/L natural organic matter. Cells displayed many of the properties that characterize enterocytes, such as apical microvilli, basolateral basement membrane, and glycogen. The cell monolayers also displayed tight junctions and electrical resistance. Exposure to pristine and oxidized MWCNT, with or without natural organic matter, did not markedly affect viability, which was assessed by measuring activity of released lactate dehydrogenase (LDH) and staining with propidium iodide. Ultrastructural analysis revealed some damage to microvilli colocalized with the MWCNT; however, neither type of MWCNT was taken up by Caco-2 cells. In contrast, pristine and oxidized MWCNT were taken up by the macrophage RAW 264.7 line. Our study suggests that intestinal enterocytes cells do not take up MWCNT. [Authors]

Proximal 11p deletion syndrome (P11pDS): additional evaluation of the clinical and molecular aspects.

The combination of multiple exostoses (EXT) and enlarged parietal foramina (foramina parietalia permagna, FPP) represent the main features of the proximal 11p deletion syndrome (P11pDS), a contiguous gene syndrome (MIM 601224) caused by an interstitial deletion on the short arm of chromosome 11. Here we present clinical aspects of two new P11pDS patients and the clinical follow-up of one patient reported in the original paper describing this syndrome. Recognised clinical signs include EXT, FPP, mental retardation, facial asymmetry, asymmetric calcification of coronary sutures, defective vision (severe myopia, nystagmus, strabismus), skeletal anomalies (small hands and feet, tapering fingers), heart defect, and anal stenosis. In addition fluorescence in situ hybridisation and molecular analysis were performed to gain further insight in potential candidate genes involved in P11pDS.

Avaliacao dos resultados cirurgicos com a tecnica da resseccao do musculo de Muller-conjuntiva no tratamento da blefaroptose. [Evaluation of the surgery results of Muller's muscle-conjunctival resection in the treatment of blepharoptosis]

OBJECTIVE: To evaluate the results of Muller's muscle-conjunctival resection for correction of blepharoptosis and to discuss the advantages of this procedure. METHODS: 38 patients (39 eyelids) were submitted to Muller's muscle-conjunctival resection. Blepharoptosis varied from 1.0 mm to 3.0 mm (mean: 2.0 mm). The amount of eyelid elevation produced by phenylephrine guided the amount of tissue to be resected. RESULT: 33 eyelids (85%) treated with this procedure were cosmetically acceptable. CONCLUSIONS: Muller's muscle-conjunctival resection procedure is a relatively simple technique for blepharoptosis, with good levator function and positive 10% phenylephrine test. The advantages are: preservation of tarsus and predictable results.

Evaluation of the Adolescent Drug Abuse Diagnosis instrument in a Swiss sample of drug abusers.

OBJECTIVE: The aim of this study was to evaluate a French language version of the Adolescent Drug Abuse Diagnosis (ADAD) instrument in a Swiss sample of adolescent illicit drug and/or alcohol users. PARTICIPANTS AND SETTING: The participants in the study were 102 French-speaking adolescents aged 13-19 years who fitted the criteria of illicit drug or alcohol use (at least one substance--except tobacco--once a week during the last 3 months). They were recruited in hospitals, institutions and leisure places. Procedure. The ADAD was administered individually by trained psychologists. It was integrated into a broader protocol including alcohol and drug abuse DSM-IV diagnoses, the BDI-13 (Beck Depression Inventory), life events and treatment trajectories. RESULTS: The ADAD appears to show good inter-rater reliability; the subscales showed good internal coherence and the correlations between the composite scores and the severity ratings were moderate to high. Finally, the results confirmed good concurrent validity for three out of eight ADAD dimensions. CONCLUSIONS: The French language version of the ADAD appears to be an adequate instrument for assessing drug use and associated problems in adolescents. Despite its complexity, the instrument has acceptable validity, reliability and usefulness criteria, enabling international and transcultural comparisons.

How to screen for problematic cannabis use in population surveys: an evaluation of the Cannabis Use Disorders Identification Test (CUDIT) in a Swiss sample of adolescents and young adults.

BACKGROUND/AIMS: Cannabis use is a growing challenge for public health, calling for adequate instruments to identify problematic consumption patterns. The Cannabis Use Disorders Identification Test (CUDIT) is a 10-item questionnaire used for screening cannabis abuse and dependency. The present study evaluated that screening instrument. METHODS: In a representative population sample of 5,025 Swiss adolescents and young adults, 593 current cannabis users replied to the CUDIT. Internal consistency was examined by means of Cronbach's alpha and confirmatory factor analysis. In addition, the CUDIT was compared to accepted concepts of problematic cannabis use (e.g. using cannabis and driving). ROC analyses were used to test the CUDIT's discriminative ability and to determine an appropriate cut-off. RESULTS: Two items ('injuries' and 'hours being stoned') had loadings below 0.5 on the unidimensional construct and correlated lower than 0.4 with the total CUDIT score. All concepts of problematic cannabis use were related to CUDIT scores. An ideal cut-off between six and eight points was found. CONCLUSIONS: Although the CUDIT seems to be a promising instrument to identify problematic cannabis use, there is a need to revise some of its items.

Evaluation of the immune response to infection with metastatic and non-metastatic "Leishmania guyanensis" parasites

ABSTRACT : Les infections par le parasite Leishmania guyanensis se caractérisent par une dissémination depuis le site initial d'infection jusqu'aux tissus naso-pharyngés, responsable de la Leishmaniose à lésions secondaires muco-cutanées (LMC). Les lésions des patients atteints de LMC montrent une massive infiltration de cellules immunitaires, une réponse immunitaire élevée et la présence de parasites (bien qu'en très faible quantité). La LMC engendre une augmentation de l'expression de TNFa ainsi qu'un défaut dans le contrôle de la réponse immunitaire caractérisé par une absence de réponse à l'IL 10. La réponse immunitaire de l'hôte ainsi que la virulence du parasite sont deux facteurs reconnus pour le contrôle de l'infection. Le mécanisme de la pathogenèse de la LMC restent grandement incompris, surtout le mécanisme de dissémination de l'infection du site d'inoculation jusqu'aux sites secondaires d'infection (métastases) ainsi que les détails de la réponse de l'hôte contre le pathogène. Dans un modèle d'infection d' hamsters avec des parasites du Nouveau Monde, la classification des parasites Leishmania se fait en fonction de leur capacité à développer des métastases. Ce modéle d'infection a permis de caractériser différentes souches de parasites selon la classification de l'Organisation Mondiale de la Sante (OMS) tel que la souche de référence W>É-II/BR/78/M5313 qui est reconnue comme hautement métastatique alors que ces clones dérivés de M5313 montrent de grandes variations quand a leur capacité à créer des métastases. Les clones 13 et 21 sont métastatiques (M+) alors que les clones 3 et 17 sont nonmétastatiques (NI-). Les objectifs de cette thèse ont été d'étudier le rôle de la réponse immunitaire innée des macrophages après infection in vitro avec différents clones métastatiques et non-métastatiques du parasite L. guyanensis, ainsi que d'étudier la réponse immunitaire générée suite à une infection in vivo par les clones M+ et M- de L. guyanensis dans un modèle marin. L'analyse de la .réponse immunitaire des macrophages in vitro montrent qu'il y aune augmentation significative de leur statut d'activation après infection par des parasites M+ indiquée par la modulation des marqueurs d'activation de surface CD80, CD86 et CD40, ainsi que une augmentation significative de CXCL 10, CCLS, IL6 et TNFa au niveau transcription de l'ARNm et au niveau de la protéine. Cette phénomène d'activation a été observée chez les deux souches de souris C57BL/6 et BALB/c. L'utilisation d'un inhibiteur d'entrée des parasites (Cytochalsin D) ou d'un inhibiteur des fonctions endosomales (Chloroquine) diminue de manière significative la réponse des macrophages aux parasites M+. L'utilisation de macrophages déficients en TLR, MyD88, et TRIF a démontré que la réponse générée après infection par les parasites M+ était dépendante de la voie de signalisation de TRIF et TLR3. Lors d'infection in vivo par des parasites M5313, au moins 50% des souris BALB/c présentent un phénotype sensible caractérisé par des lésions non-nécrotiques qui ne guérissent pas, persistent plus de 13 semaines après infection et contiennent un nombre considérable de parasites. Ces souris développent une réponse immunitaire de type T helper 2 (Th2) avec un niveau élevé d'IL-4 et d'IL-10. Les autres souris ont un phénotype non-sensible, les souris développant peu ou pas de lésion, avec peu de parasites et une réponse immunitaire diminuée, caractérisée par un niveau faible d'IFNy, d'IL4 et d'IL10. De plus, les souris BALB/c infectées par un parasite L. guyanensis isolé à partir des lésions muco-cutanées d'un patient humain atteint de LMC ont démontrés un phénotype similaire aux souris infectées par la souche M5313 avec 50% des souris développant des lésions persistantes, alors qu'un parasite dérivé des lésions cutanées humains n'a montré qu'une faible sensibilité avec une lésion transitoire qui finit par guérir. Nous avons montré que la sensibilité de ces souris BALB/c dépend de l'IL-4 et de l'IL-10 car les souris IL-10-/sur fond génétique BALB/c ainsi que les souris BALB/c traitée avec de l'anti-IL4 étaient capables de contrôler l'infection par M5313. Les souris C57BL/6 sont résistantes à l'infection par le parasite M5313. Elles développent une lésion transitoire qui guérit 9 semaines après infection. Ces souris résistantes ont un très faible taux de parasites au site d'infection et développent une réponse immunitaire de type Thl avec un niveau élevé d'IFNr et peu d'IL4 et d'IL10. Les infections in vivo de souris déficientes en MyD88, TRIF, TLR3 ou TLR9 (sur fond génétique C57BL/6) ont indiqué que MyD88 et TLR9 étaient impliqués dans la résistance à l'infection par L. guyanensi, et que TRIF et TLR3 avaient un rôle important dans la sensibilité. Ce travail met en évidence le fait que la réponse immunitaire de l'hôte est modulée par le parasite selon leur caractérisation d'être soit M+ ou M-. Nous avons démontré également que plusieurs gènes et voies de signalisations étaient impliqués dans cette réponse favorisant le développement d'une LMC. ABSTRACT : Leishmania guyanensis parasites are able to disseminate from the initial site of cutaneous skin infection to the nasopharyngeal tissues resulting in destructive secondary lesions and the disease Mucocutaneous Leishmaniasis (MCL). The secondary lesions in patients have intense immune cell infiltration, elevated immune responses and the presence (albeit at low levels) of parasites. More specifically, MCL patients produce higher levels of TNFa and display impairment in their ability to control the immune response due to a defect in their ability to respond to IL10. Little is known about the pathogenesis of MCL, especially about the dissemination of the infection from the site of inoculation to secondary sites (metastasis) and the response of the host to the pathogen. The hamster model of L. guyanensis infection has previously characterized the WHO reference strain, L. guyanensis WHI/BR/78/M5313, as being highly metastatic. Clones of parasites derived from this reference strain show a differential ability to metastasize. This thesis studied the differential immune response generated by macrophages in vitro, or by mice in vivo, following infection with L. guyanensis parasites. A significant increase in the activation status of macrophages derived from C57BL/6 or BALB/c mice was observed after in vitro infection with L. guyanensis parasites when compared to non-metastatic parasites. This change in status was evidenced by the increased expression of surface activation markers, together with the chemokines, CXCL 10, CCLS, and cytokines, IL6 and TNFa. Furthermore, in vitro infection of macrophages isolated from mice deficient in either a specific Toll Like Receptor (TLR) or the adaptor molecules MyD88 or TRIF, indicated that the immune response generated following L. guyanensis metastatic parasite infection was reliant on the TRIF dependent TLR3 signalling pathway. In vivo footpad infection of BALB/c mice with the L. guyanensis M5313 parasites showed a reproducible susceptible phenotype, whereby at least 50% of infected mice developed non-healing, nonnecrosing lesions with high parasitemia that persisted over 13 weeks post infection. This phenotype was characterized by a Th2 type cytokine immune response with increased levels of IL4 and IL10 detected in the draining lymph nodes. IL 10 deficient mice on a BALB/c background, or BALB/c mice treated with anti-IL4 were able to control infection with L. guyanensis M5313 parasites, thereby proving that these cytokines were indeed implicated in the susceptibility to infection. Moreover, infection of BALB/c mice with patient isolated L. guyanensis parasites confirmed that MCL derived parasites were able to induce a susceptibility phenotype similar to that of L. guyanensis M5313. C57BL/6 mice, on the other hand, were highly resistant to infection with L. guyanensis M5313 parasites and produced transient footpad swelling that healed by week 9 post infection, together with low degrees of footpad parasitemia and a Thl polarized immune response. Infection of mice deficient in MyD88, TRIF, TLR3, and TLR9 (on a C57BL/6 background), indicated that MyD88 and TLR9 were involved in the resistance of these mice to infection, and that TRIF and TLR3 were involved in the susceptibility. This study has shown that the host response can be differentially modulated depending on the infecting parasite with several genes and pathways being identified that could be involved in promoting the development of MCL.

Evaluation of the potential use of trabecular bone score to complement bone mineral density in the diagnosis of osteoporosis: a preliminary spine BMD-matched, case-control study.

The trabecular bone score (TBS) is a new parameter that is determined from gray-level analysis of dual-energy X-ray absorptiometry (DXA) images. It relies on the mean thickness and volume fraction of trabecular bone microarchitecture. This was a preliminary case-control study to evaluate the potential diagnostic value of TBS as a complement to bone mineral density (BMD), by comparing postmenopausal women with and without fractures. The sample consisted of 45 women with osteoporotic fractures (5 hip fractures, 20 vertebral fractures, and 20 other types of fracture) and 155 women without a fracture. Stratification was performed, taking into account each type of fracture (except hip), and women with and without fractures were matched for age and spine BMD. BMD and TBS were measured at the total spine. TBS measured at the total spine revealed a significant difference between the fracture and age- and spine BMD-matched nonfracture group, when considering all types of fractures and vertebral fractures. In these cases, the diagnostic value of the combination of BMD and TBS likely will be higher compared with that of BMD alone. TBS, as evaluated from standard DXA scans directly, potentially complements BMD in the detection of osteoporotic fractures. Prospective studies are necessary to fully evaluate the potential role of TBS as a complementary risk factor for fracture.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.