Treatment of ruptured abdominal aortic aneurysm, a permanent challenge or a waste of resources? Prediction of outcome using a multi-organ-dysfunction score.

OBJECTIVES: in a retrospective study, attempts have been made to identify individual organ-dysfunction risk profiles influencing the outcome after surgery for ruptured abdominal aortic aneurysms. METHODS: out of 235 patients undergoing graft replacement for abdominal aortic aneurysms, 57 (53 men, four women, mean age 72 years [s.d. 8.8]) were treated for ruptured aneurysms in a 3-year period. Forty-eight preoperative, 13 intraoperative and 34 postoperative variables were evaluated statistically. A simple multi-organ dysfunction (MOD) score was adopted. RESULTS: the perioperative mortality was 32%. Three patients died intraoperatively, four within 48 h and 11 died later. A significant influence for pre-existing risk factors was identified only for cardiovascular diseases. Multiple linear-regression analysis indicated that a haemoglobin <90 g/l, systolic blood pressure <80 mmHg and ECG signs of ischaemia at admission were highly significant risk factors. The cause of death for patients, who died more than 48 h postoperatively, was mainly MOD. All patients with a MOD score >/=4 died (n=7). These patients required 27% of the intensive-care unit (ICU) days of all patients and 72% of the ICU days of the non-survivors. CONCLUSION: patients with ruptured aortic aneurysms from treatment should not be excluded. However, a physiological scoring system after 48 h appears justifiable in order to decide on the appropriateness of continual ICU support.

Des systèmes d'irrigation alpins entre gouvernance communautaire et étatique = Alpine Bewässerungssysteme zwischen Genossenschaft und Staat

La gouvernance communautaire liée à l'exploitation des bisses valaisans représente-t-elle (vraiment) un modèle de gestion durable des ressources en eau ? C'est à cette question - qui fait écho au vaste ensemble de littérature regroupée sous le label des CPR (common-pool resources) Theories - que le présent ouvrage entend répondre. A travers une approche diachronique centrée sur le long terme, cinq études de cas éclairent de manière originale et critique non seulement l'évolution de cette gouvernance communautaire (vers un degré d'hybridation accru) et, surtout, son caractère durable. La perspective ressourcielle et la conception forte de la durabilité adoptées mettent, sur ce point, en évidence les limites de ces modèles de gouvernance. Sous un angle social en particulier, ils se caractérisent historiquement par un degré d'exclusivité marqué qui tend à en faire des biens de club auxquels seuls les usagers admis ont accès. Les interventions d'acteurs étatiques ont à cet égard joué un grand rôle pour ouvrir les bisses à de nouveaux usagers et assurer le maintien de la ressource dans un environnement socio-économique en mutation.

Firm's network capability and innovation performance: evidences from China hi-tech industry

ABSTRACT : A firm's competitive advantage can arise from internal resources as well as from an interfirm network. -This dissertation investigates the competitive advantage of a firm involved in an innovation network by integrating strategic management theory and social network theory. It develops theory and provides empirical evidence that illustrates how a networked firm enables the network value and appropriates this value in an optimal way according to its strategic purpose. The four inter-related essays in this dissertation provide a framework that sheds light on the extraction of value from an innovation network by managing and designing the network in a proactive manner. The first essay reviews research in social network theory and knowledge transfer management, and identifies the crucial factors of innovation network configuration for a firm's learning performance or innovation output. The findings suggest that network structure, network relationship, and network position all impact on a firm's performance. Although the previous literature indicates that there are disagreements about the impact of dense or spare structure, as well as strong or weak ties, case evidence from Chinese software companies reveals that dense and strong connections with partners are positively associated with firms' performance. The second essay is a theoretical essay that illustrates the limitations of social network theory for explaining the source of network value and offers a new theoretical model that applies resource-based view to network environments. It suggests that network configurations, such as network structure, network relationship and network position, can be considered important network resources. In addition, this essay introduces the concept of network capability, and suggests that four types of network capabilities play an important role in unlocking the potential value of network resources and determining the distribution of network rents between partners. This essay also highlights the contingent effects of network capability on a firm's innovation output, and explains how the different impacts of network capability depend on a firm's strategic choices. This new theoretical model has been pre-tested with a case study of China software industry, which enhances the internal validity of this theory. The third essay addresses the questions of what impact network capability has on firm innovation performance and what are the antecedent factors of network capability. This essay employs a structural equation modelling methodology that uses a sample of 211 Chinese Hi-tech firms. It develops a measurement of network capability and reveals that networked firms deal with cooperation between, and coordination with partners on different levels according to their levels of network capability. The empirical results also suggests that IT maturity, the openness of culture, management system involved, and experience with network activities are antecedents of network capabilities. Furthermore, the two-group analysis of the role of international partner(s) shows that when there is a culture and norm gap between foreign partners, a firm must mobilize more resources and effort to improve its performance with respect to its innovation network. The fourth essay addresses the way in which network capabilities influence firm innovation performance. By using hierarchical multiple regression with data from Chinese Hi-tech firms, the findings suggest that there is a significant partial mediating effect of knowledge transfer on the relationships between network capabilities and innovation performance. The findings also reveal that the impacts of network capabilities divert with the environment and strategic decision the firm has made: exploration or exploitation. Network constructing capability provides a greater positive impact on and yields more contributions to innovation performance than does network operating capability in an exploration network. Network operating capability is more important than network constructing capability for innovative firms in an exploitation network. Therefore, these findings highlight that the firm can shape the innovation network proactively for better benefits, but when it does so, it should adjust its focus and change its efforts in accordance with its innovation purposes or strategic orientation.

A two-week workshop to promote cardiovascular disease prevention programs in countries with limited resources.

Training is a crucial tool for building the capacity necessary for prevention and control of cardiovascular diseases (CVDs) in developing countries. This paper summarizes some features of a 2-week workshop aimed at enabling local health professionals to initiate a comprehensive CVD prevention and control program in a context of limited resources. The workshops have been organized in the regions where CVD prevention programs are being contemplated, in cooperation with health authorities of the concerned regions. The workshop's content includes a broad variety of issues related to CVD prevention and control, and to program development. Strong emphasis is placed on "learning by doing," and groups of 5-6 participants conduct a small-scale epidemiological study during the first week; during the second week, they draft a virtual program of CVD prevention and control adapted to the local situation. This practice-oriented workshop focuses on building expertise among anticipated key players, strengthening networks among relevant health professionals, and advocating the urgent need to tackle the emerging CVD epidemic in developing countries.

La pertinence en science forensique. Une (en)quête épistémologique et empirique

A criminal investigation requires to search and to interpret vestiges of a criminal act that happened in a past time. The forensic investigator arises in this context as a critical reader of the investigation scene, in search of physical traces that should enable her to tell a story of the offence/crime which allegedly occurred. The challenge of any investigator is to detect and recognise relevant physical traces in order to provide forensic clues for investigation and intelligence purposes. Inspired by this obser- vation, the current research focuses on the following questions : What is a relevant physical trace? And, how does the forensic investigator know she is facing one ? The interest of such questions is to provide a definition of a dimension often used in forensic science but never studied in its implications and operations. This doctoral research investigates scientific paths that are not often explored in forensic science, by using semiotic and sociological tools combined with statistical data analysis. The results are shown following a semiotic path, strongly influenced by Peir- ce's studies, and a second track, called empirical, where investigations data were analysed and forensic investigators interviewed about their work practices in the field. By the semiotic track, a macroscopic view is given of a signification process running from the discove- red physical trace at the scene to what is evaluated as being relevant for the investigator. The physical trace is perceived in the form of several signs, whose meaning is culturally codified. The reasoning should consist of three main steps : 1- What kind of source does the discovered physical trace refer to ? 2- What cause/activity is at the origin of this source in the specific context of the case ? 3- What story can be told from these observations ? The stage 3 requires to reason in creating hypotheses that should explain the presence of the discovered trace coming from an activity ; the specific activity that is related to the investigated case. To validate this assumption, it would depend on their ability to respond to a rule of relevancy. The last step is the symbolisation of the relevancy. The rule would consist of two points : the recognition of the factual/circumstantial relevancy (Is the link between the trace and the case recognised with the formulated hypothesis ? ) and appropriate relevancy (What investment is required to collect and analyse the discovered trace considering the expected outcome at the investigation/intelligence level?). This process of meaning is based on observations and a conjectural reasoning subject to many influences. In this study, relevancy in forensic science is presented as a conventional dimension that is symbolised and conditioned by the context, the forensic investigator's practice and her workplace environment (culture of the place). In short, the current research states relevancy results of the interactions between parameters from situational, structural (or organisational) and individual orders. The detection, collection and analysis of relevant physical traces at scenes depends on the knowledge and culture mastered by the forensic investigator. In the study of the relation relevant trace-forensic investigator, this research introduces the KEE model as a conceptual map that illustrates three major areas of forensic knowledge and culture acquisition, involved in the research and evaluation of the relevant physical trace. Through the analysis of the investigation data and interviews, the relationship between those three parameters and the relevancy was highlighted. K, for knowing, embodies a rela- tionship to the immediate knowledge allowing to give an overview of the reality at a specific moment ; an important point since relevancy is signified in a context. E, for education, is considered through its relationship with relevancy via a culture that tends to become institutionalised ; it represents the theoretical knowledge. As for the parameter E, for experience, it exists in its relation to relevancy in the adjustments of the strategies of intervention (i.e a practical knowledge) of each practitioner having modulated her work in the light of success and setbacks case after case. The two E parameters constitute the library resources for the semiotic recognition process and the K parameter ensures the contextualisation required to set up the reasoning and to formulate explanatory hypotheses for the discovered physical traces, questioned in their relevancy. This research demonstrates that the relevancy is not absolute. It is temporal and contextual; it is a conventional and relative dimension that must be discussed. This is where the whole issue of the meaning of what is relevant to each stakeholder of the investigation process rests. By proposing a step by step approach to the meaning process from the physical trace to the forensic clue, this study aims to provide a more advanced understanding of the reasoning and its operation, in order to streng- then forensic investigators' training. This doctoral research presents a set of tools critical to both pedagogical and practical aspects for crime scene management while identifying key-influences with individual, structural and situational dimensions. - Une enquête criminelle consiste à rechercher et à faire parler les vestiges d'un acte incriminé passé. L'investigateur forensique se pose dans ce cadre comme un lecteur critique des lieux à la recherche de traces devant lui permettre de former son récit, soit l'histoire du délit/crime censé s'être produit. Le challenge de tout investigateur est de pouvoir détecter et reconnaître les traces dites pertinentes pour fournir des indices forensiques à buts d'enquête et de renseignement. Inspirée par un tel constat, la présente recherche pose au coeur de ses réflexions les questions suivantes : Qu'est-ce qu'une trace pertinente ? Et, comment fait le forensicien pour déterminer qu'il y fait face ? L'intérêt de tels questionnements se comprend dans la volonté de définir une dimension souvent utili- sée en science forensique, mais encore jamais étudiée dans ses implications et fonctionnements. Cette recherche se lance dans des voies d'étude encore peu explorées en usant d'outils sémiotiques et des pratiques d'enquêtes sociologiques combinés à des traitements statistiques de données. Les résultats sont représentés en suivant une piste sémiotique fortement influencée par les écrits de Peirce et une seconde piste dite empirique où des données d'interventions ont été analysées et des investigateurs forensiques interviewés sur leurs pratiques de travail sur le terrain. Par la piste sémiotique, une vision macroscopique du processus de signification de la trace en élément pertinent est représentée. La trace est perçue sous la forme de plusieurs signes dont la signification est codifiée culturellement. Le raisonnement se formaliserait en trois principales étapes : 1- Quel type de source évoque la trace détectée? 2- Quelle cause/activité est à l'origine de cette source dans le contexte précis du cas ? 3- Quelle histoire peut être racontée à partir de ces observations ? Cette dernière étape consiste à raisonner en créant des hypothèses devant expliquer la présence de la trace détectée suite à une activité posée comme étant en lien avec le cas investigué. Pour valider ces hypothèses, cela dépendrait de leur capacité à répondre à une règle, celle de la pertinence. Cette dernière étape consiste en la symbolisation de la pertinence. La règle se composerait de deux points : la reconnaissance de la pertinence factuelle (le lien entre la trace et le cas est-il reconnu dans l'hypothèse fournie?) et la pertinence appropriée (quel est l'investissement à fournir dans la collecte et l'exploitation de la trace pour le bénéfice attendu au niveau de l'investigation/renseignement?). Tout ce processus de signification se base sur des observations et un raisonnement conjectural soumis à de nombreuses influences. Dans cette étude, la pertinence en science forensique se formalise sous les traits d'une dimension conventionnelle, symbolisée, conditionnée par le contexte, la pratique de l'investigateur forensique et la culture du milieu ; en somme cette recherche avance que la pertinence est le fruit d'une interaction entre des paramètres d'ordre situationnel, structurel (ou organisationnel) et individuel. Garantir la détection, la collecte et l'exploitation des traces pertinentes sur les lieux dépend de la connaissance et d'une culture maîtrisées par le forensicien. Dans l'étude du rapport trace pertinente-investigateur forensique, la présente recherche pose le modèle SFE comme une carte conceptuelle illustrant trois grands axes d'acquisition de la connaissance et de la culture forensiques intervenant dans la recherche et l'évaluation de la trace pertinente. Par l'analyse des données d'in- terventions et des entretiens, le rapport entre ces trois paramètres et la pertinence a été mis en évidence. S, pour savoir, incarne un rapport à la connaissance immédiate pour se faire une représentation d'une réalité à un instant donné, un point important pour une pertinence qui se comprend dans un contexte. F, pour formation, se conçoit dans son rapport à la pertinence via cette culture qui tend à s'institutionnaliser (soit une connaissance théorique). Quant au paramètre E, pour expérience, il se comprend dans son rapport à la pertinence dans cet ajustement des stratégies d'intervention (soit une connaissance pratique) de chaque praticien ayant modulé leur travail au regard des succès et échecs enregistrés cas après cas. F et E formeraient la bibliothèque de ressources permettant le processus de reconnaissance sémiotique et S assurerait la contextualisation nécessaire pour poser le raisonnement et formuler les hypothèses explicatives pour les traces détectées et questionnées dans leur pertinence. Ce travail démontre que la pertinence n'est pas absolue. Elle est temporelle et contextuelle, c'est une dimension conventionnelle relative et interprétée qui se doit d'être discutée. C'est là que repose toute la problématique de la signification de ce qui est pertinent pour chaque participant du processus d'investigation. En proposant une lecture par étapes du processus de signification depuis la trace à l'indice, l'étude vise à offrir une compréhension plus poussée du raisonnement et de son fonctionnement pour renforcer la formation des intervenants forensiques. Cette recherche présente ainsi un ensemble d'outils critiques à portée tant pédagogiques que pratiques pour la gestion des lieux tout en identifiant des influences-clé jouées par des dimensions individuelles, structurelles et situationnelles.

The evolution of unicoloniality in ant societies : recognition, dispersal and population genetic structure

Introduction Societies of ants, bees, wasps and termites dominate many terrestrial ecosystems (Wilson 1971). Their evolutionary and ecological success is based upon the regulation of internal conflicts (e.g. Ratnieks et al. 2006), control of diseases (e.g. Schmid-Hempel 1998) and individual skills and collective intelligence in resource acquisition, nest building and defence (e.g. Camazine 2001). Individuals in social species can pass on their genes not only directly trough their own offspring, but also indirectly by favouring the reproduction of relatives. The inclusive fitness theory of Hamilton (1963; 1964) provides a powerful explanation for the evolution of reproductive altruism and cooperation in groups with related individuals. The same theory also led to the realization that insect societies are subject to internal conflicts over reproduction. Relatedness of less-than-one is not sufficient to eliminate all incentive for individual selfishness. This would indeed require a relatedness of one, as found among cells of an organism (Hardin 1968; Keller 1999). The challenge for evolutionary biology is to understand how groups can prevent or reduce the selfish exploitation of resources by group members, and how societies with low relatedness are maintained. In social insects the evolutionary shift from single- to multiple queens colonies modified the relatedness structure, the dispersal, and the mode of colony founding (e.g. (Crozier & Pamilo 1996). In ants, the most common, and presumably ancestral mode of reproduction is the emission of winged males and females, which found a new colony independently after mating and dispersal flights (Hölldobler & Wilson 1990). The alternative reproductive tactic for ant queens in multiple-queen colonies (polygyne) is to seek to be re-accepted in their natal colonies, where they may remain as additional reproductives or subsequently disperse on foot with part of the colony (budding) (Bourke & Franks 1995; Crozier & Pamilo 1996; Hölldobler & Wilson 1990). Such ant colonies can contain up to several hundred reproductive queens with an even more numerous workforce (Cherix 1980; Cherix 1983). As a consequence in polygynous ants the relatedness among nestmates is very low, and workers raise brood of queens to which they are only distantly related (Crozier & Pamilo 1996; Queller & Strassmann 1998). Therefore workers could increase their inclusive fitness by preferentially caring for their closest relatives and discriminate against less related or foreign individuals (Keller 1997; Queller & Strassmann 2002; Tarpy et al. 2004). However, the bulk of the evidence suggests that social insects do not behave nepotistically, probably because of the costs entailed by decreased colony efficiency or discrimination errors (Keller 1997). Recently, the consensus that nepotistic behaviour does not occur in insect colonies was challenged by a study in the ant Formica fusca (Hannonen & Sundström 2003b) showing that the reproductive share of queens more closely related to workers increases during brood development. However, this pattern can be explained either by nepotism with workers preferentially rearing the brood of more closely related queens or intrinsic differences in the viability of eggs laid by queens. In the first chapter, we designed an experiment to disentangle nepotism and differences in brood viability. We tested if workers prefer to rear their kin when given the choice between highly related and unrelated brood in the ant F. exsecta. We also looked for differences in egg viability among queens and simulated if such differences in egg viability may mistakenly lead to the conclusion that workers behave nepotistically. The acceptance of queens in polygnous ants raises the question whether the varying degree of relatedness affects their share in reproduction. In such colonies workers should favour nestmate queens over foreign queens. Numerous studies have investigated reproductive skew and partitioning of reproduction among queens (Bourke et al. 1997; Fournier et al. 2004; Fournier & Keller 2001; Hammond et al. 2006; Hannonen & Sundström 2003a; Heinze et al. 2001; Kümmerli & Keller 2007; Langer et al. 2004; Pamilo & Seppä 1994; Ross 1988; Ross 1993; Rüppell et al. 2002), yet almost no information is available on whether differences among queens in their relatedness to other colony members affects their share in reproduction. Such data are necessary to compare the relative reproductive success of dispersing and non-dispersing individuals. Moreover, information on whether there is a difference in reproductive success between resident and dispersing queens is also important for our understanding of the genetic structure of ant colonies and the dynamics of within group conflicts. In chapter two, we created single-queen colonies and then introduced a foreign queens originating from another colony kept under similar conditions in order to estimate the rate of queen acceptance into foreign established colonies, and to quantify the reproductive share of resident and introduced queens. An increasing number of studies have investigated the discrimination ability between ant workers (e.g. Holzer et al. 2006; Pedersen et al. 2006), but few have addressed the recognition and discrimination behaviour of workers towards reproductive individuals entering colonies (Bennett 1988; Brown et al. 2003; Evans 1996; Fortelius et al. 1993; Kikuchi et al. 2007; Rosengren & Pamilo 1986; Stuart et al. 1993; Sundström 1997; Vásquez & Silverman in press). These studies are important, because accepting new queens will generally have a large impact on colony kin structure and inclusive fitness of workers (Heinze & Keller 2000). In chapter three, we examined whether resident workers reject young foreign queens that enter into their nest. We introduced mated queens into their natal nest, a foreign-female producing nest, or a foreign male-producing nest and measured their survival. In addition, we also introduced young virgin and mated queens into their natal nest to examine whether the mating status of the queens influences their survival and acceptance by workers. On top of polgyny, some ant species have evolved an extraordinary social organization called 'unicoloniality' (Hölldobler & Wilson 1977; Pedersen et al. 2006). In unicolonial ants, intercolony borders are absent and workers and queens mix among the physically separated nests, such that nests form one large supercolony. Super-colonies can become very large, so that direct cooperative interactions are impossible between individuals of distant nests. Unicoloniality is an evolutionary paradox and a potential problem for kin selection theory because the mixing of queens and workers between nests leads to extremely low relatedness among nestmates (Bourke & Franks 1995; Crozier & Pamilo 1996; Keller 1995). A better understanding of the evolution and maintenance of unicoloniality requests detailed information on the discrimination behavior, dispersal, population structure, and the scale of competition. Cryptic genetic population structure may provide important information on the relevant scale to be considered when measuring relatedness and the role of kin selection. Theoretical studies have shown that relatedness should be measured at the level of the `economic neighborhood', which is the scale at which intraspecific competition generally takes place (Griffin & West 2002; Kelly 1994; Queller 1994; Taylor 1992). In chapter four, we conducted alarge-scale study to determine whether the unicolonial ant Formica paralugubris forms populations that are organised in discrete supercolonies or whether there is a continuous gradation in the level of aggression that may correlate with genetic isolation by distance and/or spatial distance between nests. In chapter five, we investigated the fine-scale population structure in three populations of F. paralugubris. We have developed mitochondria) markers, which together with the nuclear markers allowed us to detect cryptic genetic clusters of nests, to obtain more precise information on the genetic differentiation within populations, and to separate male and female gene flow. These new data provide important information on the scale to be considered when measuring relatedness in native unicolonial populations.

The fate and persistence of Leishmania major in mice of different genetic backgrounds: an example of exploitation of the immune system by intracellular parasites.

Leishmania spp. are intracellular protozoan parasites that are delivered within the dermis of their vertebrate hosts. Within this peripheral tissue and the draining lymph node, they find and/or rapidly create dynamic microenvironments that determine their ultimate fate, namely their more or less successful expansion, and favour their transmission to another vertebrate host though a blood-feeding vector. Depending on their genetic characteristics as well as the genetic make-up of their hosts, once within the dermis Leishmania spp. very rapidly drive and maintain sustained T cell-dependent immune responses that arbitrate their ultimate fate within their hosts. The analysis of the parasitism exerted by Leishmania major in mice of different genetic backgrounds has allowed us to recognize some of the early and late mechanisms driven by this parasite that lead to either uncontrolled or restricted parasitism. Uncontrolled parasitism by Leishmania major characterizing mice from a few inbred strains (e.g. BALB/c) is associated with the expansion of parasite reactive Th2 CD4 lymphocytes and results from their rapid and sustained activity. In contrast, restricted parasitism characteristic of mice from the majority of inbred strains results from the development of a polarized parasite-specific Th1 CD4 response. This murine model of infection has already been and will continue to be particularly instrumental in dissecting the rules controlling the pathway of differentiation of T cells in vivo. In the long run, the understanding of these rules should contribute to the rational development of novel immunotherapeutic interventions against severe infectious diseases.

The thermal circuits of the Argentera Massif (western Alps, Italy): An example of low-enthalpy geothermal resources controlled by Neogene alpine tectonics

This work presents geochemistry and structural geology data concerning the low enthalpy geothermal circuits of the Argentera crystalline Massif in northwestern Italian Alps. I n this area some thermal springs (50-60 degreesC), located in the small Bagni di Vinadio village, discharge mixtures made up of a Na-Cl end-member and a Na-SO4 component. The latter is also discharged by the thermal springs of Terme di Valdieri located some kilometres apart within the same tectonic complex. Both end-members share the same meteoric origin and the same reservoir temperature, which is close to 150 degreesC. Explanations are thus required to understand how they reach the surface and how waters of the same origin and circulating in similar rocks can attain such different compositions. Sodium-sulphate waters discharged at both sites, likely represent the common interaction product of meteoric waters with the widespread granitic-migmatitic rocks of the Argentera Massif, whereas Na-CI waters originate through leaching of mineralised cataclastic rocks, which are rich in phyllosilicatic minerals and fluid inclusions, both acting as Cl- sources. Due to the relatively low inferred geothermal gradient of the region, -25C/km, meteoric waters have to descend to depths of 5.5-6 km to attain temperatures of similar to 150 degreesC. These relevant depths can be reached by descending meteoric waters, due to the recent extensional stress field, which allows the development of geothermal circulations at greater depths than in other sectors of the Alps by favouring a greater fractures aperture. The ascent of the thermal waters rakes place along brittle shear zones. In both sites, the thermal waters emerge at the bottoms of the valleys, close to either the lateral termination of a brittle shear zone at Terme di Valdieri, or a step-over between two en-echelon brittle shear zones at Bagni di Vinadio. These observations attest to a strong control operated on the location of outlet regions by both brittle tectonics and the minima in hydraulic potential inside the fractured massif.

Minerais, métaux, isotopes : recherches archéométriques sur les mines de plomb et d'argent en Valais, Suisse

RESUME Les nombreuses mines de plomb et d'argent du Valais témoignent d'une activité minière importante par le passé, sans toutefois dévoiler ni l'importance des minéralisations, ni l'ancienneté de l'exploitation. La présente recherche a pour but de comprendre pourquoi les grandes mines sont concentrées dans une région, et de déterminer la chronologie de leur exploitation. L'originalité de ce travail réside dans son interdisciplinarité, plus précisément dans l'application des méthodes minéralogiques pour résoudre une problématique historique. Afin d'évaluer les ressources minières en plomb et en argent du Valais, 57 mines et indices ont été repérés et échantillonnés. Les signatures isotopiques du Pb (74 analyses) et les compositions chimiques élémentaires (45 analyses) ont été déterminées. Les plus grandes exploitations se situent dans la nappe de Siviez-Mischabel, au Sud d'une ligne Vallée du Rhône / Val de Bagnes ainsi que dans le Lötschental. Elles sont liées, d'après leur signature isotopique de plomb, à des minéralisations d'âge calédonien (408 à 387 Ma) ou tardi-hercynien (333 à 286 Ma). À ces périodes, l'ancien continent est très lourd et subit une subsidence thermique. Des premières fractures d'extrême importance se forment. Comme il s'agit d'accidents tectoniques majeurs, des gisements de grande extension peuvent se former dans ce contexte. D'autres minéralisations se situent dans les domaines helvétiques (Massif des Aiguilles Rouges, Massif du Mont Blanc et couverture sédimentaire), couvrant une région au Nord de la Vallée du Rhône et du Val d'Entremont. D'âge post-hercynien à tardi-alpin (notons qu'il n'y a pas de minéralisations d'âge tertiaire), elles sont pour la plupart liées à des intrusions granitiques, sources de plomb juvénile. Les mines situées dans ces unités tectoniques sont nettement moins étendues que celles de la nappe de Siviez-Mischabel, ce qui permet de penser que les minéralisations correspondantes le sont également. Les périodes d'exploitation des mines peuvent être déterminées par quatre approches différentes l'archéologie minière, la lecture des textes historiques, l'étude des déchets métallurgiques et la comparaison de la signature isotopique du plomb, que l'on mesure dans un objet archéologique bien daté (monnaie, bijoux etc.), avec celles des minerais. Cette dernière méthode a été appliquée et développée dans le cadre de la présente recherche. Pour ce faire, 221 échantillons d'objet en plomb ou en argent datés entre l'Âge du Fer et le Moyen Age ont été analysés par la méthode des isotopes de plomb et comparés à environ 1800 signatures isotopiques de minerais des gisements les plus importants en Suisse et en Europe. Avant l'époque romaine et jusqu'au 1 er siècle de cette époque, le plomb provient principalement des mines de la péninsule ibérique alors en pleine activité. Un apport des mines d'Europe tempérée, notamment des Vosges, reste à confirmer. A partir du 1" siècle de notre ère, le plomb a principalement été importé en Suisse occidentale de grands centres de productions situées en Allemagne du Nord (région d'Eifel). Les mines de plomb valaisannes, notamment celles de Siviez, débutent leur exploitation en même temps, principalement pour couvrir les besoins locaux, mais également pour l'exportation jusque dans l'arc lémanique et, dans une moindre importance, au-delà. À partir du 4ème siècle, le besoin en plomb a été couvert par un apport des mines locales et par la refonte d'objets anciens. Ce changement d'approvisionnement est probablement lié aux tensions créées par les invasions germaniques durant la seconde moitié du 3' siècle ; le marché suisse n'est dès lors plus approvisionné par le nord, c'est-à-dire par la vallée du Rhin. Quant à l'argent, l'exploitation de ce métal est attestée à partir de la fin du La Tène, peu après l'apparition de ce métal dans la région valaisanne. L'échantillonnage ne couvrant pas l'époque romaine, rien n'est connu pour cette période. A partir du 5" siècle, une exploitation d'argent est de nouveau attestée. Cependant, l'exploitation d'argent des mines locales ne gagne en importance qu'à partir du Moyen Âge avec les frappes monétaires, notamment les frappes carolingiennes et épiscopales valaisannes. Les sources d'argent sont différentes selon leur utilisation : à part quelques exceptions notamment vers la fin du La Tène et au tardo-antique, les bijoux et objets de cultes ont été souvent créés à partir d'argent refondu, contrairement aux monnaies pour lesquelles l'argent provient des mines locales. On note un approvisionnement différent de ce métal pour les objets, notamment les monnaies, selon leur lieu de fabrication : on peut clairement distinguer les objets valaisans de ceux du Plateau Suisse. SUMMARY The many lead and silver mines of the Valais testify of an important mining activity in the past, without however revealing neither the importance of the mineralizations, nor the era of the exploitation. The purpose of this research is to understand why the large mines are concentrated in one region, and to determine the history of their exploitation. The uniqueness of this work lies in its interdisciplinarity, more precisely in the application of mineralogical methods to solve historical problems. In order to evaluate the lead and silver mining resources of the Valais region, 57 mines and ore deposits were located and sampled. The isotope signatures of Pb (74 analyses) and the compositions of the chemical elements (45 analyses) were determined. The largest activities are in the Siviez-Mischabel area, located in the South of the boundary formed by the Rhone, Bagnes and Lotschental valleys. According to their lead isotope signatures, they are linked to mineralizations of the Caledonian (408 to 387 my) or tardi-Hercynian (333 to 286 my) orogenies. In those times, the old continent was very heavy and underwent a thermal subsidence. First fractures of great significance were formed. Through these major tectonic events, large extended ore deposits can be formed. Other mineralizations are found in the helvetic regions situated north of the Rhone and the Entremont valley (the Aiguilles Rouges basement, Mount Blanc basement and the covering sediment). Because they are from post-hercynien to tardi-alpine age (there are no mineralizations of tertiary age), they are mainly linked to granite intrusions, the sources of juvenile lead. The mines found in these tectonic units are significantly less extensive than those of the Siviez-Mischabel area, leading to the assumption that the respective mineralizations extend accordingly. The history of exploitation of the mines can be determined by four different sources: mining archaeology, historical texts, metallurgical waste, and the comparison of the isotope signature of the lead from accurately dated archaeological objects (currency, jewels etc), with those of the ores. This last approach was applied and developed within the framework of this research. The lead isotope signatures of 221 lead or silver objects from the Iron Age to the Middle Age were compared with approximately 1800 samples of ore of the most important ore deposits in Switzerland and Europe. Before the Roman time up to the 1st century, lead comes mainly from the mines of the Iberian Peninsula then in full activity. A contribution of the mines of Central Europe, in particular of the Vosges, remains to be confirmed. From the 1st century on, lead was mainly imported into Western Switzerland from Northern Germany (Eiffel region). The lead mines in the Valais region, in particular those of Siviez, begin their exploitation at the same time, mainly to meet the local needs, but also for export to the lemanic basin and of lesser importance, beyond. As from the 4th century, the need of lead was met by the production from local mines and the recycling of old objects. This change of supply is probably related to the tensions created by the Germanic invasions during second half of the 3rd century; as a consequence, the Swiss market is not supplied any more by the north, i.e. the Rhine valley. Silver production is confirmed starting from the end of La Tene, shortly after the appearance of this metal in the Valais region. Since no objects of Roman origin were analyzed, nothing is known for this period. From the 5th century on, silver production is again confirmed. However, significant silver production from local mines starts only in the Middle Age with the coinage, in particular Carolingian and Episcopal minting from the Valais region. The sources of silver differ according to their use: besides some exceptions in particular towards the end of La Tene and the tardi-Roman, the jewels and objects of worships were often created from recycled silver, contrary to the coins the silver for which comes from the local mines. A different source of silver is observed according to the location of coin manufacture: Objects originating from the Valais region are clearly distinguished from those from the Plateau Suisse. ZUSAMMENFASSUNG Die grosse Zahl von Blei- und Silberminen im Wallis ist Zeugnis einer bedeutenden Bergbautätigkeit, es fehlen aber Hinweise über ihren Umfang und den Zeitraum ihrer Ausbeutung. Die vorliegende Arbeit sucht zu ergründen, warum grosse Minen sich in einer eng begrenzten Region häufen und in welchem Zeitraum sie genutzt wurden. Die Besonderheit der Studie liegt in ihrer Interdisziplinarität, genauer in der Anwendung von mineralogischen Methoden zur Beantwortung historischer Fragestellungen. Zur Beurteilung der Lagerstätten wurden von 57 Minen und Aufschlüssen Proben entnommen oder Nachweise erbracht und mittels 74 Isotopen-Analysen von Blei und 45 chemischen Gesamtanalysen ausgewertet. Die wichtigsten Vorkommen liegen in der Siviez- Mischabel- Decke südlich der Linie Rhonetal- Val de Bagnes, sowie im Lötschental. Die Bleiisotopen- Alter weisen ihre Entstehung der kaledonischen (408 - 387 Mio. J.) oder der spät- herzynischen (333 - 286 Mio. J.) Gebirgsbildungsphase zu. In dieser Periode ist die kompakte Landmasse sehr schwer und erfairt eine thermische Absenkung. Es bilden sich tektonische Brüche von kontinentaler Ausdehnung. Die grossen tektonischen Bewegungen ermöglichen die Bildung von ausgedehnten Lagerstätten. Andere Vorkommen finden sich im Bereich der Helvetischen Alpen (Aiguilles Rouges Massiv, Mont-Blanc-Massiv und Sediment-Decken) im Gebiet nördlich des Rhonetales bis zum Val d'Entremont. Altersmässig sind sie der nach-hercynischen bis zur spät-alpidischen Orogenese zuzuweisen (auffällig ist das Fehlen von Vorkommen im Tertiär) und haben sich meist in der Folge von Granit- Intrusion, dem Ursprung von primärem Blei ausgebildet. Die Bergwerke in diesem Bereich sind deutlich weniger ausgedehnt als jene in der Siviez-Mischabel-Decke und entsprechen wahrscheinlich dem geringen Umfang der zugehörigen Vorkommen. Die Nutzungsperioden der Minen können mit vier verschiedenen Methoden bestimmt werden: Minenarchäologie, Historische Quellen, Auswertung von metallischen Abfällen (Schlacken) und Vergleich der Bleiisotopen-Zusammensetzung von Erzen mit jener von zeitlich gut datierbaren archäologischen Gegenständen (Münzen, Schmuckstücke). Die letztere Methode wurde im Rahmen der vorliegenden Forschungsarbeit entwickelt und angewendet. Zu diesem Zweck wurden an 221 Proben von Blei- oder Silberobjekten, die in die Periode zwischen Eisenzeit und Mittelalter eingestuft werden können, Bleiisotopen- Analysen durchgeführt und mit ca. 1800 Proben aus den wichtigsten Lagerstätten der Schweiz und Europas verglichen. Vor der Römerzeit und bis ins 1. Jahrh. stammt das Blei vornehmlich aus den in jener Zeit in voller Ausbeutung begriffenen Minen der Iberischen Halbinsel. Der Beitrag von Mitteleuropa, besonders der Vogesen, muss noch bestätigt werden. Ab dem 1. Jahrh. nach Chr. wurde die Westschweiz hauptschlich mit Blei aus den grossen Produktionszentren Norddeutschlands, vorwiegend der Eifel, versorgt. In dieser Periode setzt die Ausbeutung der Bleiminen des Wallis, besonders von Siviez, ein. Sie dienen der Deckung des örtlichen Bedarfs aber auch der Ausfuhr in das Gebiet des Genfersees und in einem bescheidenen Rahmen sogar darüber hinaus. Ab dem 4. Jahrhundert wurden vermehrt alte Objekte eingeschmolzen. Dieser Wechsel der Versorgungsquellen war vermutlich eine Folge der Wölkerwanderung in der zweiten Hälfte des 3. Jahrhunderts. Ab diesem Zeitpunkt war Helvetien der Zugang zu den Versorgungsquellen des Nordens, besonders des Rheinlandes, verwehrt. Der Abbau von Silber ist ab dem Ende des La Tène nachgewiesen, nur wenig nach dem Auftreten dieses Metalls im Wallis. Über die Römerzeit können wegen dem Fehlen entsprechender Proben keine Aussagen gemacht werden. Eine erneute Abbauperiode ist ab dem 5. Jahrhundert nachgewiesen. Die Produktion der örtlichen Minen erreicht aber erst im Mittelalter eine gewisse Bedeutung mit der Prägung von Mnzen durch die Karolinger und die Walliser Bischöfe. Die Herkunft des Silbers ist abhängig von dessen Verwendung. Mit wenigen Ausnahmen in der Zeit des La Tène und der späteren Römerzeit wurde für Kunst- und Kult- Gegenstände rezykliertes Silber verwendet, für Münzprägungen neues Silber aus den örtlichen Minen. Von Einfluss auf die Herkunft war auch der Produktionsstandort: Die Objekte aus dem Wallis unterscheiden sich deutlich von jenen des Mittellandes.

Détection et exploitation des traces de produits stupéfiants. Partie I : étude de leur processus d'échange et de leur utilisation dans un cadre policier

Cette publication présente une approche originale et novatrice de la recherche et de l'exploitation des traces de stupéfiants. Elle propose une description détaillée des phénomènes de transfert et de persistances de ces particules ainsi que l'interprétation des résultats obtenus par l'analyse de spectrométrie à mobilité ionique (IMS). Des simulations de manipulation et de conditionnement de produits stupéfiants ont été réalisées en distinguant plusieurs groupes de personnes en fonction de leur proximité de contact avec des stupéfiants. Ces simulations ont montré que des personnes n'étant pas en contact avec des produits stupéfiants ne présentaient pas de traces de ces derniers. Au contraire, une manipulation laisse des traces qu'il est possible de détecter et d'interpréter. Parmi les stupéfiants étudiés, le plus "contaminogène" s'est avéré être la cocaïne. Les résultats obtenus permettent enfin de proposer une démarche opérationnelle d'intégration de cette technologie dans le cadre des interventions effectuées par les brigades canines.