Importance of ENaC-mediated sodium transport in alveolar fluid clearance using genetically-engineered mice.

The lung possesses specific transport systems that intra- and extracellularly maintain salt and fluid balance necessary for its function. At birth, the lungs rapidly transform into a fluid (Na(+))-absorbing organ to enable efficient gas exchange. Alveolar fluid clearance, which mainly depends on sodium transport in alveolar epithelial cells, is an important mechanism by which excess water in the alveoli is reabsorbed during the resolution of pulmonary edema. In this review, we will focus and summarize on the role of ENaC in alveolar lung liquid clearance and discuss recent data from mouse models with altered activity of epithelial sodium channel function in the lung, and more specifically in alveolar fluid clearance. Recent data studying mice with hyperactivity of ENaC or mice with reduced ENaC activity clearly illustrate the impaired lung fluid clearance in these adult mice. Further understanding of the physiological role of ENaC and its regulatory proteins implicated in salt and water balance in the alveolar cells may therefore help to develop new therapeutic strategies to improve gas exchange in pulmonary edema.

Karyotypic variation between wood mouse species: banded chromosomes of Apodemus alpicola and A-microps

The banding pattern (G-, C-, AgNOR-staining) was described in karyotypes of Apodemus alpicola Heinrich, 1952 and A. microps Kratochvil et Rosicky, 1952 collected from the Alps and central Europe, Distinct differences between the two species were revealed in the distribution of C-heterochromatic regions in autosomes and the sex chromosomes, and the distribution of nucleolar organizer regions (NORs). Extensive variation in the distribution pattern of C-heterochromatin and NORs obviously exists among the wood mice of the subgenus Sylvaemus, and individual species can be distinguished according to a specific variation pattern. However, it seems premature to designate individual karyotypic forms as separate species, because the extent of overall geographical interpopulation variation is still not sufficiently known.

Minimal analytical characterisation of engineered nanomaterials need for hazard assessment in biological matrices

The safe and responsible development of engineered nanomaterials (ENM), nanotechnology-based materials and products, together with the definition of regulatory measures and implementation of "nano"-legislation in Europe require a widely supported scientific basis and sufficient high quality data upon which to base decisions. At the very core of such a scientific basis is a general agreement on key issues related to risk assessment of ENMs which encompass the key parameters to characterise ENMs, appropriate methods of analysis and best approach to express the effect of ENMs in widely accepted dose response toxicity tests. The following major conclusions were drawn: Due to high batch variability of ENMs characteristics of commercially available and to a lesser degree laboratory made ENMs it is not possible to make general statements regarding the toxicity resulting from exposure to ENMs. 1) Concomitant with using the OECD priority list of ENMs, other criteria for selection of ENMs like relevance for mechanistic (scientific) studies or risk assessment-based studies, widespread availability (and thus high expected volumes of use) or consumer concern (route of consumer exposure depending on application) could be helpful. The OECD priority list is focussing on validity of OECD tests. Therefore source material will be first in scope for testing. However for risk assessment it is much more relevant to have toxicity data from material as present in products/matrices to which men and environment are be exposed. 2) For most, if not all characteristics of ENMs, standardized methods analytical methods, though not necessarily validated, are available. Generally these methods are only able to determine one single characteristic and some of them can be rather expensive. Practically, it is currently not feasible to fully characterise ENMs. Many techniques that are available to measure the same nanomaterial characteristic produce contrasting results (e.g. reported sizes of ENMs). It was recommended that at least two complementary techniques should be employed to determine a metric of ENMs. The first great challenge is to prioritise metrics which are relevant in the assessment of biological dose response relations and to develop analytical methods for characterising ENMs in biological matrices. It was generally agreed that one metric is not sufficient to describe fully ENMs. 3) Characterisation of ENMs in biological matrices starts with sample preparation. It was concluded that there currently is no standard approach/protocol for sample preparation to control agglomeration/aggregation and (re)dispersion. It was recommended harmonization should be initiated and that exchange of protocols should take place. The precise methods used to disperse ENMs should be specifically, yet succinctly described within the experimental section of a publication. 4) ENMs need to be characterised in the matrix as it is presented to the test system (in vitro/ in vivo). 5) Alternative approaches (e.g. biological or in silico systems) for the characterisation of ENMS are simply not possible with the current knowledge. Contributors: Iseult Lynch, Hans Marvin, Kenneth Dawson, Markus Berges, Diane Braguer, Hugh J. Byrne, Alan Casey, Gordon Chambers, Martin Clift, Giuliano Elia1, Teresa F. Fernandes, Lise Fjellsbø, Peter Hatto, Lucienne Juillerat, Christoph Klein, Wolfgang Kreyling, Carmen Nickel1, and Vicki Stone.

Behavioural species discrimination in red wood ants (Formica rufa group)

The Formica rufa group (red wood ants) currently includes six species. Nevertheless, during previous work based on molecular markers, we showed the existence of one population morphologically identified as F. lugubris, but genetically different from all other analysed populations of this species. This population could represent a cryptic species within the Swiss National Park and has been provisionally named Formica lugubris-A2. To verify our hypothesis, we conducted a behavioural test based on the ability of ants to recognize pupae of their own species when compared to those of another species. The three red wood ant species present in the Swiss National Park (F. lugubris, F. paralugubris and F. aquilonia) and the F. lugubris-A2 population were used in our study. Results indicate that the F. lugubris-A2 population differs from other F. lugubris and from all other species in the behaviour of its workers and in the way its pupae are discriminated by other species. This is in accordance with the genetic data and strengthens our hypothesis on the existence of a new cryptic red wood ant species within the Swiss National Park.

Contribution to the conservation biology of the wood ant Formica lugubris (Hymenoptera, Formicidae) in Switzerland

Summary Among ants, wood ants are probably the most fascinating and studied species in temperate European forests. Unfortunately, due to several threats they are nowadays registered in red lists. Recent studies made in the Swiss Jura Mountains ended up in the description of a new sympatric sibling species of Formica lugubris (i.e. Formica paralugubris Seifert 1996). Because of this confusion the biology of F. lugubris is incomplete. Due to the extreme difficulties to distinguish morphologically F. lugubris from F. paralugubris we studied their cuticular hydrocarbons profiles. Irrespective of their geographic origin, we observed quantitative discrimination between species within each caste (workers, males and gynes =young alate female). Moreover, using a behavioural taxonomic approach (i.e. the pupa-carrying test) we showed that ants preferred conspecific worker pupae to those of the sibling species. These first results allowed us to consider the two species as two separate taxonomic units. To understand their coexistence, habitat distribution models were fitted with GIS predictors and factors known to influence wood ant distribution. In the Jura Mountains, although the two species share very similar habitats, they are spatially segregated. F. lugubris occurs more frequently at woodland borders than in forest interiors. We demonstrated with genetic and field data that Formica lugubris displays two different social forms in close proximity in alpine zone (e.g. unmanaged forests of the Swiss National Park). We discovered populations mostly monogynous to weakly polygynous (i.e. one to a few egg laying queens per colony) and monodomous (i.e. one nest per colony), and polygynous/polydomous populations (new nests being founded by colony budding). It is generally admitted that monogyne species disperse well in order to find suitable habitat to found new colonies whereas polygyne species have restricted dispersal and local mating within the nest. In order to compare reproductive strategies of F. lugubris and F. paralugubris (i.e. matings and dealation process) we conducted experiments with sexuals. F, lugubris gynes from monogynous/monodomous populations do not show a local strategy like the obligately polygynous F. paralugubris (i.e. early dealation even without mating, insemination without flight activity and low fat reserve). They always keep their wings, do not mate when not able to fly and have high amount of fat content revealing high survival capacities. On the other side, F, lugubris gynes from polygynous/polydomous populations have lower lipid reserves and displayed a reproductive behaviour close to the F. para lugubris one. After dispersal, wood ant gynes can either start new societies by temporary social parasitism of another species (i.e. subgenus Serviformica) or be adopted intraspecifically in an existing nest. In F. lugubris, we demonstrated that gynes from monogynous/monodomous colonies showed a high success for temporary social parasitism compare to the lower success of gynes from polygynous/polydomous colonies. However, physiological analyses suggested that only gynes from monogynous/ monodomous populations can efficiently disperse and found new nest by temporary social parasitism. Intraspecifically, gynes were accepted to a high degree in polygynous nest and in monogynous nests as long as these nests contained sexuals. In conclusion, Formica lugubris displays a social and dispersal polymorphism (mixed mating and founding system) representing a behavioural plasticity in relation to environmental and ecological conditions. Therefore, conservation measures directed toward this species should try to maintain a maximum of diversity at the habitat level. Résumé Les fourmis des bois sont probablement parmi les espèces de fourmis les plus fascinantes et les plus étudiées des forêts tempérées Européennes. Actuellement, du fait de différentes menaces, elles figurent malheureusement sur listes rouges. Plusieurs études menées au sein du Jura Suisse ont abouti à la description d'une nouvelle espèce jumelle et sympatrique de Formica lugubris (F. para- lugubris Seifert 1996). A cause de cette confusion la biologie de F lugubris est lacunaire. La distinction morphologique de F. lugubris et de F. para lugubris est si difficile que nous avons étudié leurs hydrocarbures cuticulaires. Indépendamment de l'origine géographique, nous avons observé une discrimination quantitative entre les espèces au sein de chaque caste (ouvrières, mâles et jeunes femelles ailées). De plus, à l'aide d'une approche taxonomique comportementale (le test de transport de cocons) nous avons montré que les fourmis préfèrent des cocons d'ouvrières conspécifiques à ceux de l'espèce jumelle. Ces premiers résultats nous permettent de considérer ces deux espèces comme deux unités taxonomiques distinctes et valables. Afin de comprendre leur coexistence, des modèles mathématiques ont été développés avec des données SIG et des facteurs écologiques influençant la répartition des fournis des bois. Dans le Jura, même si elles partagent des habitats fortement similaires, les deux espèces n'occupent pas les mêmes secteurs. F. lugubris est plus fréquente en lisière forestière plutôt qu'en pleine forêt. Nous avons démontré grâce à des données génétiques et de terrain que F. lugubris présente deux formes sociales au sein de la zone alpine (forêts protégées du Parc National Suisse). D'autre part, nous avons découvert des populations monogynes à faiblement polygynes (une à quelques reines pondeuses par colonie) et monodomes (colonies composées d'une seule fourmilière), et des populations polygynes/polydomes (les nouveaux nids étant produit par bourgeonnement). Généralement, les espèces monogynes dispersent sur de grandes distances et peuvent coloniser des habitats favorables à la fondation de nouvelles colonies alors que les espèces polygynes possèdent une dispersion limitée avec des accouplements à l'intérieur des nids. Afin de comparer les stratégies de reproduction de F. lugubris et de F. paralugubris (accouplements et perte des ailes) nous avons mené des expériences avec les sexués. Les jeunes femelles ailées de F. lugubris issues de populations monogynes/monodomes ne présentent pas de stratégie locale comparée à l'espèce obligatoirement polygyne F paralugubris (perte des ailes précoce même si il n'y a pas eu accouplement, insémination possible sans avoir volé activement et faibles réserves de graisse). Elles conservent toujours leurs ailes, ne s'accouplent pas lorsqu'elles sont empêchées de voler et possèdent de grandes quantités de graisse révélant de fortes capacités de survie. D'autre part, les jeunes femelles ailées de F. lugubris provenant de populations polygynes/polydomes ont peu de réserves lipidiques et ont un comportement de reproduction proche de celles de F. paralugubris. Après leur dispersion, les jeunes sexués femelles de fourmis des bois peuvent soit fonder une nouvelle société par parasitisme social temporaire d'un nid d'une autre espèce (sous-genre Serviformica) soit être adoptées dans un nid déjà existant de leur propre espèce. Chez F. lugubris, nous avons pu démontrer que les jeunes sexués femelles de colonies monogynes/monodomes présentent un succès élevé au parasitisme sociale temporaire en comparaison au plus faible succès obtenu avec des sexués provenant de colonies polygynes/polydomes. Cependant, les données physiologiques suggèrent que seules les jeunes sexués femelles de populations mono-gynes/monodomes peuvent disperser efficacement et fonder un nouveau nid par parasitisme social temporaire. Au niveau intraspécifique, les jeunes femelles sont acceptées à un taux élevé dans les nids polygynes mais aussi dans les nids monogynes tant que ces nids possèdent encore de jeunes sexués. En conclusion, F. lugubris est caractérisée par un polymorphisme dans ses structures sociales et ses stratégies de dispersion (système mixte d'accouplement et de fondation) ce qui représente une forte plasticité comportementale en relation avec les conditions environnementales et écologiques. Par conséquent, les mesures de conservation de cette espèce devraient s'attacher à maintenir un maximum de diversité au niveau des habitats.

The long-term survival of in vitro engineered nervous tissue derived from the specific neural differentiation of mouse embryonic stem cells.

Embryonic stem cells (ESCs) offer attractive prospective as potential source of neurons for cell replacement therapy in human neurodegenerative diseases. Besides, ESCs neural differentiation enables in vitro tissue engineering for fundamental research and drug discovery aimed at the nervous system. We have established stable and long-term three-dimensional (3D) culture conditions which can be used to model long latency and complex neurodegenerative diseases. Mouse ESCs-derived neural progenitor cells generated by MS5 stromal cells induction, result in strictly neural 3D cultures of about 120-mum thick, whose cells expressed mature neuronal, astrocytes and myelin markers. Neurons were from the glutamatergic and gabaergic lineages. This nervous tissue was spatially organized in specific layers resembling brain sub-ependymal (SE) nervous tissue, and was maintained in vitro for at least 3.5 months with great stability. Electron microscopy showed the presence of mature synapses and myelinated axons, suggesting functional maturation. Electrophysiological activity revealed biological signals involving action potential propagation along neuronal fibres and synaptic-like release of neurotransmitters. The rapid development and stabilization of this 3D cultures model result in an abundant and long-lasting production that is compatible with multiple and productive investigations for neurodegenerative diseases modeling, drug and toxicology screening, stress and aging research.

Encapsulated, genetically engineered cells, secreting glucagon-like peptide-1 for the treatment of non-insulin-dependent diabetes mellitus.

Non-insulin-dependent, or type II, diabetes mellitus is characterized by a progressive impairment of glucose-induced insulin secretion by pancreatic beta cells and by a relative decreased sensitivity of target tissues to the action of this hormone. About one third of type II diabetic patients are treated with oral hypoglycemic agents to stimulate insulin secretion. These drugs however risk inducing hypoglycemia and, over time, lose their efficacy. An alternative treatment is the use of glucagon-like peptide-1 (GLP-1), a gut peptidic hormone with a strong insulinotropic activity. Its activity depends of the presence of normal blood glucose concentrations and therefore does not risk inducing hypoglycemia. GLP-1 can correct hyperglycemia in diabetic patients, even in those no longer responding to hypoglycemic agents. Because it is a peptide, GLP-1 must be administered by injection; this may prevent its wide therapeutic use. Here we propose to use cell lines genetically engineered to secrete a mutant form of GLP-1 which has a longer half-life in vivo but which is as potent as the wild-type peptide. The genetically engineered cells are then encapsulated in semi-permeable hollow fibers for implantation in diabetic hosts for constant, long-term, in situ delivery of the peptide. This approach may be a novel therapy for type II diabetes.

Scnn1 sodium channel gene family in genetically engineered mice.

The amiloride-sensitive epithelial sodium channel is the limiting step in salt absorption. In mice, this channel is composed of three subunits (alpha, beta, and gamma), which are encoded by different genes (Scnn1a, Scnn1b, and Scnn1c, respectively). The functions of these genes were recently investigated in transgenic (knockout) experiments, and the absence of any subunit led to perinatal lethality. More defined phenotypes have been obtained by introducing specific mutations or using transgenic rescue experiments. In this report, these approaches are summarized and a current gene-targeting strategy to obtain conditional inactivation of the channel is illustrated. This latter approach will be indispensable for the investigation of channel function in a wide variety of organ systems.

Development of a dose-controlled multiculture cell exposure chamber for efficient delivery of airborne and engineered nanoparticles

In order to study the various health influencing parameters related to engineered nanoparticles as well as to soot emitted b diesel engines, there is an urgent need for appropriate sampling devices and methods for cell exposure studies that simulate the respiratory system and facilitate associated biological and toxicological tests. The objective of the present work was the further advancement of a Multiculture Exposure Chamber (MEC) into a dose-controlled system for efficient delivery of nanoparticles to cells. It was validated with various types of nanoparticles (diesel engine soot aggregates, engineered nanoparticles for various applications) and with state-of-the-art nanoparticle measurement instrumentation to assess the local deposition of nanoparticles on the cell cultures. The dose of nanoparticles to which cell cultures are being exposed was evaluated in the normal operation of the in vitro cell culture exposure chamber based on measurements of the size specific nanoparticle collection efficiency of a cell free device. The average efficiency in delivering nanoparticles in the MEC was approximately 82%. The nanoparticle deposition was demonstrated by Transmission Electron Microscopy (TEM). Analysis and design of the MEC employs Computational Fluid Dynamics (CFD) and true to geometry representations of nanoparticles with the aim to assess the uniformity of nanoparticle deposition among the culture wells. Final testing of the dose-controlled cell exposure system was performed by exposing A549 lung cell cultures to fluorescently labeled nanoparticles. Delivery of aerosolized nanoparticles was demonstrated by visualization of the nanoparticle fluorescence in the cell cultures following exposure. Also monitored was the potential of the aerosolized nanoparticles to generate reactive oxygen species (ROS) (e.g. free radicals and peroxides generation), thus expressing the oxidative stress of the cells which can cause extensive cellular damage or damage on DNA.

Minimal analytical characterization of engineered nanomaterials needed for hazard assessment in biological matrices.

Abstract This paper presents the outcomes from a workshop of the European Network on the Health and Environmental Impact of Nanomaterials (NanoImpactNet). During the workshop, 45 experts in the field of safety assessment of engineered nanomaterials addressed the need to systematically study sets of engineered nanomaterials with specific metrics to generate a data set which would allow the establishment of dose-response relations. The group concluded that international cooperation and worldwide standardization of terminology, reference materials and protocols are needed to make progress in establishing lists of essential metrics. High quality data necessitates the development of harmonized study approaches and adequate reporting of data. Priority metrics can only be based on well-characterized dose-response relations derived from the systematic study of the bio-kinetics and bio-interactions of nanomaterials at both organism and (sub)-cellular levels. In addition, increased effort is needed to develop and validate analytical methods to determine these metrics in a complex matrix.

The presence of conifer resin decreases the use of the immune system in wood ants

1. Wood ants (Formica paralugubris) incorporate large amounts of solidified conifer resin into their nest, which reduces the density of many bacteria and fungi and protects the ants against some detrimental micro-organisms. By inducing an environment unfavourable to pathogens, the presence of resin may allow workers to reduce the use of their immune system. 2. The present study tested the hypothesis that the presence of resin decreases the immune activity of wood ants. Specifically, three components of the humoral immune defences of workers kept in resin-rich and resin-free experimental nests (antibacterial, lytic, and prophenoloxidase activities) were compared. 3. The presence of resin was associated with reduced bacterial and fungal densities in nest material and with a small decrease in worker antibacterial and lytic activities. The prophenoloxidase activity was very low in all workers and was not affected by the presence of resin. 4. These results suggest that collective medication with resin reduces pathogen pressure, which in turn decreases the use of the inducible part of the immune system. More generally, the use of plant secondary compounds might be an efficient and economical way to fight pathogens.

Limitations and information needs for engineered nanomaterial-specific exposure estimation and scenarios: recommendations for improved reporting practices

The aim of this paper is to describe the process and challenges in building exposure scenarios for engineered nanomaterials (ENM), using an exposure scenario format similar to that used for the European Chemicals regulation (REACH). Over 60 exposure scenarios were developed based on information from publicly available sources (literature, books, and reports), publicly available exposure estimation models, occupational sampling campaign data from partnering institutions, and industrial partners regarding their own facilities. The primary focus was on carbon-based nanomaterials, nano-silver (nano-Ag) and nano-titanium dioxide (nano-TiO2), and included occupational and consumer uses of these materials with consideration of the associated environmental release. The process of building exposure scenarios illustrated the availability and limitations of existing information and exposure assessment tools for characterizing exposure to ENM, particularly as it relates to risk assessment. This article describes the gaps in the information reviewed, recommends future areas of ENM exposure research, and proposes types of information that should, at a minimum, be included when reporting the results of such research, so that the information is useful in a wider context.