Abaisser la pression arterielle: urgent ou pas urgent? [How urgent is it to decrease high blood pressure?]

Severe hypertension represents a frequent problem for the general practitioner. One has to decide if the blood pressure needs to be decreased immediately (hypertensive emergency), or if the blood pressure maybe progressively decreased in a few hours and normalized in a few days (hypertensive crisis). Thus it is crucial to identify on the basis of the clinical history and a careful physical examination, the patients for whom the arterial blood pressure elevation represents an acute danger for organ damage or a vital threat in the absence of immediate blood pressure control. In the case of hypertensive crisis, oral medication is usually sufficient (slow release or GITS nifedipine, nitroglycerin, labetalol, captopril). The hypertensive emergency sometimes requires an oral medication before the admission to the emergency room, then followed by intravenous drug administration (sodium nitroprussiate, nitroglycerin, labetalol).

A multicenter study to validate the reproducibility of MSI testing with a panel of 5 quasimonomorphic mononucleotide repeats.

Microsatellite instability (MSI) testing in clinics is becoming increasingly widespread; therefore, there is an urgent need for methodology standardization and the availability of quality control. This study is aimed to assess the interlaboratory reproducibility of MSI testing in archive samples by using a panel of 5 recently introduced, mononucleotide repeats (MNR). The quality control involved 8 European institutions. Participants were supplied with DNA extracted from 15 archive colon carcinoma samples and from the corresponding normal tissues. Every group was asked to assess the MSI status of the samples by using the BAT25, BAT26, NR21, NR24, and NR27 mononucleotide markers. Four institutions repeated the analysis using the NCI reference panel to confirm the results obtained with the MNR markers. The overall concordance among institutions for MSI analyses at single locus level was 97.7% when using the MNR panel and 95.0% with the NCI one. The laboratories obtained a full agreement in scoring the MSI status of each patient sample, both using the mononucleotide and the NCI marker sets. With the NCI marker set, however, concordance was lowered to 85.7% when considering the MSI-Low phenotype. Concordance between the 2 panels in scoring the MSI status of each sample was complete if no discrimination was made between MSI-Stable and MSI-L, whereas it dropped to 76.7% if MSI-L was considered. In conclusion, the use of the MNR panel seems to be a robust approach that yields a very high level of reproducibility. The results obtained with the 5 MNR are diagnostically consistent with those obtained by the use of the NCI markers, except for the MSI-Low phenotype.

Tandem use of solid-phase extraction and dispersive liquid-liquid microextraction for the determination of mononitrotoluenes in aquatic environment.

Solid-phase extraction (SPE) in tandem with dispersive liquid-liquid microextraction (DLLME) has been developed for the determination of mononitrotoluenes (MNTs) in several aquatic samples using gas chromatography-flame ionization (GC-FID) detection system. In the hyphenated SPE-DLLME, initially MNTs were extracted from a large volume of aqueous samples (100 mL) into a 500-mg octadecyl silane (C(18) ) sorbent. After the elution of analytes from the sorbent with acetonitrile, the obtained solution was put under the DLLME procedure, so that the extra preconcentration factors could be achieved. The parameters influencing the extraction efficiency such as breakthrough volume, type and volume of the elution solvent (disperser solvent) and extracting solvent, as well as the salt addition, were studied and optimized. The calibration curves were linear in the range of 0.5-500 μg/L and the limit of detection for all analytes was found to be 0.2 μg/L. The relative standard deviations (for 0.75 μg/L of MNTs) without internal standard varied from 2.0 to 6.4% (n=5). The relative recoveries of the well, river and sea water samples, spiked at the concentration level of 0.75 μg/L of the analytes, were in the range of 85-118%.

Prevalence of obesity and overweight and associated nutritional factors in a population-based Swiss sample: an opportunity to analyze the impact of three different European cultural roots.

PURPOSE: Obesity represents a growing public health concern worldwide. The latest data in Switzerland rely on self-reported body mass index (BMI), leading to underestimation of prevalence. We reassessed the prevalence of obesity and overweight in a sample of the Swiss population using measured BMI and waist circumference (WC) and explored the association with nutritional factors and living in different linguistic-cultural regions. METHODS: Data of 1,505 participants of a cross-sectional population-based survey in the three linguistic regions of Switzerland were analyzed. BMI and WC were measured, and a 24-h urine collection was performed to evaluate dietary sodium, potassium and protein intake. RESULTS: The prevalence of overweight, obesity and abdominal obesity was 32.2, 14.2 and 33.6 %, respectively. Significant differences were observed in the regional distribution, with a lower prevalence in the Italian-speaking population. Low educational level, current smoking, scarce physical activity and being migrant were associated with an higher prevalence of obesity. Sodium, potassium and protein intake increased significantly across BMI categories. CONCLUSIONS: Obesity and overweight affect almost half of the Swiss adolescents and adults, and the prevalence appears to increase. Using BMI and WC to define obesity led to different prevalences. Differences were furthermore observed across Swiss linguistic-cultural regions, despite a common socio-economic and governmental framework. We found a positive association between obesity and salt intake, with a potential deleterious synergistic effect on cardiovascular risk.

Efficacy of clinical guideline implementation to improve the appropriateness of chest physiotherapy prescription among inpatients with community-acquired pneumonia

BACKGROUND: Although there is no strong evidence of benefit, chest physiotherapy (CP) seems to be commonly used in simple pneumonia. CP requires equipment and frequently involves the assistance of a respiratory therapist, engendering a significant medical workload and cost. AIM: To measure and compare the efficacy of two modalities of chest physiotherapy (CP) guideline implementation on the appropriateness of CP prescription among patients hospitalised for community-acquired pneumonia (CAP). PATIENTS AND METHODS: We measured the CP prescription rate and duration in all consecutive CAP inpatients admitted in a division of general internal medicine at an urban teaching community hospital during three consecutive one-year time periods: (1) before any guideline implementation; (2) after a passive implementation by medical grand rounds and guideline diffusion through mailing; (3) after adding a one-page reminder in the CAP patient's medical chart highlighting our recommendations. Death and recurrent hospitalisation rates within one year after hospitalisation were recorded to assess whether CP prescription reduction, if any, impaired patient outcomes. RESULTS: During the three successive phases, 127, 157, and 147 patients with similar characteristics were included. Among all CAP inpatients, the CP prescription rate decreased from 68% (86/127) to 51% (80/157), and to 48% (71/147), respectively (P for trend <0.01 for trend). A significant reduction in CP duration was observed after the active guideline implementation (12.0, 11.0, 7.0days, respectively) and persisted after adjustment for length of stay. Reductions in CP prescription rate and duration were also observed among CAP patients with COPD CP prescription rate: 97% (30/31), 67% (24/36), 75% (35/47), respectively (P<0.01 for trend). The mean cost of CP per patient was reduced by 56%, from $709 to $481, and to $309, respectively. Neither the in-hospital deaths, the one-year overall recurrent hospitalisation nor the one-year CAP-specific recurrent hospitalisation significantly differed between the three phases. CONCLUSION: Both passive and active implementation of guidelines appear to improve the appropriateness of CP prescription among inpatients with CAP without impairing their outcomes. Restricting CP use to patients who benefit from this treatment might be an opportunity to decrease CAP medical cost and workload.

Relationship Between the Development of the Spinal Canal and the Etiopathogenesis of Lumbar Spinal Stenosis

INTRODUCTION: The presence of a pre-existing narrow spinal canal may have an important place in the ethiopathogenesis of lumbar spinal stenosis. By consequence the study of the development of the spinal canal is crucial. The first goal of this work is to do a comprehensive literature search and to give an essential view on the development of spinal canal and its depending factors studied until now. The second goal is to give some considerations and hypothesize new leads for clinically useful researches. MATERIALS AND METHODS: A bibliographical research was executed using different search engines: PubMed, Google Schoolar ©, Ovid ® and Web Of Science ©. Free sources and avaible from the University of Lausanne (UNIL) and Centre Hospitalier Universitaire Vaudois (CHUV) were used. At the end of the bibliographic researches 114 references were found, 85 were free access and just 41 were cited in this work. Most of the found references are in English or in French. RESULTS AND DISCUSSION: The spinal canal is principally limited by the vertebrae which have a mesodermal origin. The nervous (ectodermal) tissue significantly influences the growth of the canal. The most important structure participating in the spinal canal growth is the neurocentral synchondrosis in almost the entire vertebral column. The fusion of the half posterior arches seems to have less importance for the canal size. The growth is not homogeneous but, depends on the vertebral level. Timing, rate and growth potentials differ by regions. Especially in the case of the lumbar segment, there is a craniocaudal tendency which entails a greater post-natal catch-up growth for distal vertebrae. Trefoil-shape of the L5 canal is the consequence of a sagittal growth deficiency. The spinal canal shares some developmental characteristics with different structures and systems, especially with the central nervous system. It may be the consequence of the embryological origin. It is supposed that not all the related structures would be affected by a growth impairment because of the different catch-up potentials. Studies found that narrower spinal canals might be related with cardiovascular and gastrointestinal symptoms, lower thymic function, bone mineral content, dental hypoplasia and Harris' lines. Anthropometric correlations found at birth disappear during the pediatric age. All factors which can affect bone and nervous growth might be relevant. Genetic predispositions are the only factors that can never be changed but the real impact is to ascertain. During the antenatal period, all the elements determining a good supply of blood and oxygen may influence the vertebral canal development, for example smoking during pregnancy. Diet is a crucial factor having an impact on both antenatal and postnatal growth. Proteins intake is the only proved dietetic relationship found in the bibliographic research of this work. The mechanical effects due to locomotion changes are unknown. Socioeconomic situation has an impact on several influencing factors and it is difficult to study it owing to numerous bias. CONCLUSIONS: A correct growth of spinal canal is evidently relevant to prevent not-degenerative stenotic conditions. But a "congenital" narrower canal may aggravate degenerative stenosis. This concerns specific groups of patient. If the size of the canal is highly involved in the pathogenesis of common back pains, a hypothetical measure to prevent developmental impairments could have a not- negligible impact on the society. It would be interesting to study more about dietetic necessities for a good spinal canal development. Understanding the relationship between nervous tissues and vertebra it might be useful in identifying what is needed for the ideal development. Genetic importance and the post-natal influences of upright standing on the canal growth remain unsolved questions. All these tracks may have a double purpose: knowing if it is possible to decrease the incidence of narrower spinal canal and consequently finding possible preventive measures. The development of vertebral canal is a complex subject which ranges over a wide variety of fields. The knowledge of this subject is an indispensable tool to understand and hypothesize the influencing factors that might lead to stenotic conditions. Unfortunately, a lack of information makes difficult to have a complete and satisfactory interdisciplinary vision.

Verification at the protein level of the PIF4-mediated external coincidence model for the temperature-adaptive photoperiodic control of plant growth in Arabidopsis thaliana.

Plant circadian clock controls a wide variety of physiological and developmental events, which include the short-days (SDs)-specific promotion of the elongation of hypocotyls during de-etiolation and also the elongation of petioles during vegetative growth. In A. thaliana, the PIF4 gene encoding a phytochrome-interacting basic helix-loop-helix (bHLH) transcription factor plays crucial roles in this photoperiodic control of plant growth. According to the proposed external coincidence model, the PIF4 gene is transcribed precociously at the end of night specifically in SDs, under which conditions the protein product is stably accumulated, while PIF4 is expressed exclusively during the daytime in long days (LDs), under which conditions the protein product is degraded by the light-activated phyB and also the residual proteins are inactivated by the DELLA family of proteins. A number of previous reports provided solid evidence to support this coincidence model mainly at the transcriptional level of the PIF 4 and PIF4-traget genes. Nevertheless, the diurnal oscillation profiles of PIF4 proteins, which were postulated to be dependent on photoperiod and ambient temperature, have not yet been demonstrated. Here we present such crucial evidence on PIF4 protein level to further support the external coincidence model underlying the temperature-adaptive photoperiodic control of plant growth in A. thaliana.

Broadening the horizon--level 2.5 of the HUPO-PSI format for molecular interactions.

BACKGROUND: Molecular interaction Information is a key resource in modern biomedical research. Publicly available data have previously been provided in a broad array of diverse formats, making access to this very difficult. The publication and wide implementation of the Human Proteome Organisation Proteomics Standards Initiative Molecular Interactions (HUPO PSI-MI) format in 2004 was a major step towards the establishment of a single, unified format by which molecular interactions should be presented, but focused purely on protein-protein interactions. RESULTS: The HUPO-PSI has further developed the PSI-MI XML schema to enable the description of interactions between a wider range of molecular types, for example nucleic acids, chemical entities, and molecular complexes. Extensive details about each supported molecular interaction can now be captured, including the biological role of each molecule within that interaction, detailed description of interacting domains, and the kinetic parameters of the interaction. The format is supported by data management and analysis tools and has been adopted by major interaction data providers. Additionally, a simpler, tab-delimited format MITAB2.5 has been developed for the benefit of users who require only minimal information in an easy to access configuration. CONCLUSION: The PSI-MI XML2.5 and MITAB2.5 formats have been jointly developed by interaction data producers and providers from both the academic and commercial sector, and are already widely implemented and well supported by an active development community. PSI-MI XML2.5 enables the description of highly detailed molecular interaction data and facilitates data exchange between databases and users without loss of information. MITAB2.5 is a simpler format appropriate for fast Perl parsing or loading into Microsoft Excel.

A framework to understand the variations of PSD-95 expression in brain aging and in Alzheimer's disease.

The postsynaptic density protein PSD-95 is a major element of synapses. PSD-95 is involved in aging, Alzheimer's disease (AD) and numerous psychiatric disorders. However, contradictory data about PSD-95 expression in aging and AD have been reported. Indeed in AD versus control brains PSD-95 varies according to regions, increasing in the frontal cortex, at least in a primary stage, and decreasing in the temporal cortex. In contrast, in transgenic mouse models of aging and AD PSD-95 expression is decreased, in behaviorally aged impaired versus unimpaired rodents it can decrease or increase and finally, it is increased in rodents grown in enriched environments. Different factors explain these contradictory results in both animals and humans, among others concomitant psychiatric endophenotypes, such as depression. The possible involvement of PSD-95 in reactive and/or compensatory mechanisms during AD progression is underscored, at least before the occurrence of important synaptic elimination. Thus, in AD but not in AD transgenic mice, enhanced expression might precede the diminution commonly observed in advanced aging. A two-compartments cell model, separating events taking place in cell bodies and synapses, is presented. Overall these data suggest that AD research will progress by untangling pathological from protective events, a prerequisite for effective therapeutic strategies.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Ecotoxicological approaches to assess the long-term effects of four anticancer drugs and metabolites on Daphnia pulex

The aquatic environment is exposed continuously and increasingly to chemical substances such as pharmaceuticals. These medical compounds are released into the environment after having being consumed and body-excreted by patients. Pharmaceutical residues are synthetic molecules that are not always removed by traditional sewage treatment processes and thus escape degradation. Among pharmaceuticals that escape sewage treatment plants (STPs), the anticancer drugs were measured in STP effluents and natural waters. In the aquatic environment, their long-term effects at low concentrations are sparsely known on non-target species. Tamoxifen is an anticancer drug that is widely prescribed worldwide for the prevention and treatment of hormone receptor-positive breast cancers. Two of its metabolites, i.e., endoxifen and 4-hydroxy- tamoxifen (4OHTam), have high pharmacological potency in vivo and such as tamoxifen, they are excreted via faeces by patients. Tamoxifen was measured in STP effluents and natural waters but, to the best of our knowledge, its metabolites concentrations in waters have never been reported. Imatinib is another and recent anticancer compound that targets specific tumour cells. This pharmaceutical is also body excreted and because of its increasing use in cancer treatment, imatinib may reach the natural water. The effects of tamoxifen and imatinib are unknown upon more than one generation of aquatic species. And the effects of 4OHTam, endoxifen have never been studied in ecotoxicology so far. The aims of this thesis were threefold. First, the sensitivity of D. pulex exposed to tamoxifen, 4OHTam, endoxifen or imatinib was assessed using ecotoxicological experiments. Ecotoxicology is the science that considers the toxic effects of natural or synthetic substances, such as pharmaceuticals, on organisms, populations, community and ecosystem. Acute and multigenerational (2-4 generations) tests were performed on daphnids considering several studied endpoints, such as immobilisation, size, reproduction, viability and intrinsic rate of natural increase. Additional prospective assays were designed to evaluate whether 1) low concentrations of tamoxifen and 4OHTam were able to induce toxic effects when used in combination, and 2) daphnids were able to recover when offspring were withdrawn from solutions carrying the pharmaceutical. Second, the stability of tamoxifen, 4OHTam and endoxifen in incubation medium was evaluated in solution exempted from daphnids. Because the nominal concentrations of tamoxifen, 4OHTam and endoxifen did not correspond to the measured, we provide a predictive method to estimate the concentrations of these chemicals during long-term ecotoxicological tests. Finally, changes in protein expressions were analysed in D. pulex exposed 2 or 7 seven days to tamoxifen using ecotoxicoproteomic experiments with a shot-gun approach inducing a peptide fractionation step. Our results show that tamoxifen, 4OHTam and endoxifen induced adverse effects in D. pulex at environmentally relevant concentrations. At very low concentrations, these molecules displayed unusual and teratogenic effects because morphological abnormalities were observed in offspring, such as thick and short antennas, curved spines, premature neonates and aborted eggs. Tamoxifen was the most toxic compound among the test chemicals, followed by 4OHTam, endoxifen and imatinib. Tamoxifen no-observed effect concentrations (NOECs) that were calculated for size, reproduction and intrinsic rate were below or in the range of the concentrations measured in natural waters, i.e., between 0.12 µg/L and 0.67 µg/L. For instance, the tamoxifen NOECs that were calculated for reproduction were between 0.67 and 0.72 µg/L, whereas the NOEC was < 0.15 µg/L when based on morphological abnormalities. The NOECs of 4OHTam were higher but still in the same order of magnitude as tamoxifen environmental concentrations, with a value of 1.48 µg/L. Endoxifen NOEC for the intrinsic rate of natural increase (r) and the reproduction were 0.4 and 4.3 µg/L, respectively. Daphnids that were withdrawn from tamoxifen and 4OHTam were not able to recover. Also, the reproduction of D. pulex was reduced when the treated animals were exposed to the combination of tamoxifen and 4OHTam while no effects were observed when these chemicals were tested individually at the same concentration. Among the anticancer drugs that were tested during this thesis, imatinib was the less toxic molecule towards D. pulex. No effects on size and reproduction were observed within two generations, except for the first whose reproduction decreased at the highest test concentration, i.e., 626 µg/L. Our results also underline the need to use measured or predicted concentrations instead of the nominal during aquatic experiments, particularly when lipophilic molecules are tested. Indeed, notable differences between nominal (i.e., theoretical) and measured concentrations were found with tamoxifen, 4OHTam and endoxifen at all test concentrations. A cost and time sustainable method was proposed to predict the test exposure levels of these chemicals during long-term experiments. This predictive method was efficient particularly for low concentrations, which corresponded to the test concentrations in multigenerational tests. In the ecotoxicoproteomic experiments a total of 3940 proteins were identified and quantified in D. pulex exposed to tamoxifen. These results are currently the largest dataset from D. pulex that is published and the results of proteomic analyses are available for the scientific community. Among these 3940 proteins, 189 were significantly different from controls. After protein annotation, we assumed that treated daphnids with tamoxifen had shifted cost-energy functions, such as reproduction, to maintain their basic metabolism necessary to survive. This metabolic cost hypothesis was supported by the presence of proteins involved in oxidative stress. Biomarkers for early detection of tamoxifen harmful effects on D. pulex were not discovered but the proteins of the vitellogenin-2 family (E9H8K5) and the ryanodine receptor (E9FTU9) are promising potential biomarkers because their expression was already modified after 2 days of treatment. In this thesis, the effects of tamoxifen, 4OHTam and endoxifen on daphnids raise questions about the potential impact of tamoxifen and 4OHTam in other aquatic ecosystems, and therefore, about metabolites in ecotoxicology. Because the NOECs were environmentally relevant, these results suggest that tamoxifen and 4OHTam may be interesting pharmaceuticals to consider in risk assessment. Our findings also emphasize the importance of performing long-term experiments and of considering multi-endpoints instead of the standard reproductive endpoint. Finally, we open the discussion about the importance to measure test exposures or not, during ecotoxicological studies. -- Les milieux aquatiques sont exposés continuellement à un nombre croissant de substances chimiques, notamment les médicaments issus de la médecine vétérinaire et humaine. Chez les patients, les substances administrées sont utilisées par le corps avant d'être éliminées par l'intermédiaire des excrétas dans le système d'eaux usées de la ville. Ces eaux rejoignent ensuite une station de traitement afin d'y éliminer les déchets. Dans le cas des molécules chimiques, il arrive que les processus de traitement d'eaux usées ne soient pas suffisamment efficaces et que ces molécules ne soient pas dégradées. Elles sont alors libérées dans le milieu aquatique avec les effluents de la station d'épuration. Une fois dans l'environnement, ces résidus de médicaments sont susceptibles d'induire des effets sur la faune et la flore aquatique, dont les conséquences à long terme et à faibles concentrations sont peu connues. Les anticancéreux sont une famille de médicaments qui peuvent échapper aux traitements des stations d'épuration et qui sont retrouvées dans le milieu aquatique naturel. Parmi ces substances, le tamoxifen est une molécule utilisée dans le monde entier pour prévenir et traiter les cancers hormonaux dépendant du sein, notamment. Une fois ingéré, le tamoxifen est transformé par le foie en métabolites dont deux d'entre eux, le 4-hydroxy-tamoxifen (4OHTam) et l'endoxifen, possèdent un affinité pour les récepteurs aux estrogènes et une efficacité sur les cellules tumorales supérieure au tamoxifen lui- même. Tout comme la molécule mère, ces métabolites sont principalement éliminés par l'intermédiaire des fèces. Le tamoxifen a déjà été mesuré dans les effluents de stations d'épuration et dans les eaux naturelles, mais aucune valeur n'a été reportée pour ses métabolites jusqu'à présent. Un autre anticancéreux, également éliminé par voie biliaire et susceptible d'atteindre l'environnement, est l'imatinib. Cette récente molécule a révolutionné le traitement et la survie des patients souffrant de leucémie myéloïde chronique et de tumeur stromales gastrointestinales. Les effets du tamoxifen et de l'imatinib sur plusieurs générations d'organismes aquatiques, tels que les microcrustacés Daphnia, sont inconnus et le 4OHTam et l'endoxifen n'ont même jamais été testés en écotoxicologie. Cette thèse s'est articulée autour de trois objectifs principaux. Premièrement, la sensibilité des D. pulex exposés au tamoxifen, 4OHTam, endoxifen et imatinib a été évaluée par l'intermédiaire de tests aigus et de tests sur deux à quatre générations. La mobilité, la taille, la reproduction, la viabilité et la croissance potentielle de la population ont été relevées au cours de ces expériences. Des tests supplémentaires, à but prospectifs, ont également été réalisés afin d'évaluer 1) la capacité de récupération des daphnies, lorsque leurs descendants ont été placés dans un milieu exempté de tamoxifen ou de 4OHTam, 2) les effets chez les daphnies exposées à une solution contenant de faibles concentration de tamoxifen et de 4OHTam mélangés. Le deuxième objectif a été d'évaluer la stabilité du tamoxifen, 4OHTam et endoxifen dilué dans le milieu des daphnies. Après analyses, les concentrations mesurées ne correspondaient pas aux concentrations nominales (c.-à-d., théoriques) et il a été nécessaire de développer une méthode efficace de prédiction des niveaux d'exposition lors de tests de longue durée réalisés avec ces trois molécules. Finalement, des changements dans l'expression des protéines chez des daphnies exposées au tamoxifen ont été investigués par l'intermédiaire d'expériences écotoxicoprotéomiques avec une approche dite de shot-gun avec une étape de fractionnement des protéines. Les résultats obtenus dans cette thèse montrent que le tamoxifen, le 4OHTam et l'endoxifen induisent des effets indésirables chez les daphnies à des niveaux d'exposition proches ou identiques aux concentrations du tamoxifen mesurées dans l'environnement, c'est-à-dire 0.12 et 0.67 µg/L de tamoxifen. Ces molécules ont induit des effets inhabituels tels que la production de : nouveau-nés anormaux, avec des antennes et des queues déformées, des prématurés et des oeufs avortés. Le tamoxifen fut la molécule la plus toxique pour les D. pulex suivie du 4OHTam, de l'endoxifen et enfin de l'imatinib. Lors des expériences sur plusieurs générations, les concentrations n'ayant statistiquement pas d'effet (c.à.d. NOEC en anglais) sur la taille, la reproduction et la croissance intrinsèque de la population étaient du même ordre de grandeur que les concentrations environnementales du tamoxifen. Par exemple, les NOECs du tamoxifen calculées pour la reproduction étaient de 0.67 et 0.72 µg/L, tandis que celle calculée sur la base des anomalies chez les nouveau-nés était < 0.15 µg/L. Les NOECs du 4OHTam se situaient entre 0.16 et 1.48 µg/L et celles de l'endoxifen pour la croissance intrinsèque de la population, ainsi que pour la reproduction, étaient de 0.4 et 4.3 µg/L, respectivement. Dans l'expérience basée sur la récupération des daphnies, la taille et la reproduction ont diminué bien que la descendance fût placée dans un milieu sans substances chimiques. Les daphnies exposées au mélange de tamoxifen et de 4OHTam ont produit moins de nouveau-nés que les contrôles, alors que ces concentrations n'ont pas induit d'effets lorsque testées individuellement. Finalement, l'imatinib n'a pas montré d'effets sur les deux générations testées. Seule la première génération exposée à la plus haute concentration (626 µg/L) a montré une diminution de la reproduction. Les résultats obtenus lors de l'évaluation de la stabilité du tamoxifen, 4OHTam et endoxifen dans le milieu des daphnies ont souligné l'importance d'utiliser des concentrations mesurées ou prédites en écotoxicologie. En effet, des différences notables entre concentrations nominales et mesurées ont été observées à toutes les concentrations et l'hypothèse d'un phénomène d'adsorption sur le verre des récipients a été posée. De ce fait, il a été nécessaire d'élaborer une méthode prédictive efficace et acceptable, en terme de temps et de coûts. Une régression polynomiale basée sur des concentrations mesurées et nominales a permis de prédire avec efficacité les faibles niveaux d'exposition utilisés lors d'expériences écotoxicologiques à long terme, sur plusieurs générations. Suite aux expériences d'écotoxicoprotéomiques, un total de 3940 protéines ont été identifiées et quantifiées chez des daphnies exposées au tamoxifen. Ce nombre est actuellement la plus large série de données publiées et mises à disposition pour la communauté scientifique. Parmi ces protéines, 189 sont significatives et possiblement reliées à des processus de reproduction et de stress. Sur cette base, nous avons émis l'hypothèse que les individus subissant un stress, lié à l'exposition au tamoxifen, ont utilisé leur énergie de base pour favoriser leur survie plutôt que la reproduction. Enfin, la détermination de bio-marqueurs exprimant des dommages précoces des daphnies exposées au tamoxifen n'a pas abouti en tant que telle, mais des protéines prometteuses, telle que la famille de viellogenin-2 (E9H8K5) et le récepteur à la ryanodine (E9FTU9), ont été exprimées après deux jours d'exposition déjà. Ces protéines pourraient faire l'objet d'investigations écotoxicoprotéomiques futures. Les résultats de cette thèse posent certaines questions quant au risque du tamoxifen, du 4OHTam et de l'endoxifen sur la faune et la flore aquatique et plus particulièrement sur les anticancéreux présents dans l'environnement. Les effets toxiques de ces molécules ont été observés à des concentrations environnementales et sur plusieurs générations. La question de considérer les métabolites, et ainsi les pro-médicaments, en écotoxicologie est soulevée, notamment parce que ces molécules peuvent être plus actives et efficaces que la molécule mère. Les expériences chroniques, sur plusieurs générations sont également à favoriser car elles offrent un meilleur reflet de la réalité environnementale que des essais aigus ou d'une génération. L'utilisation de la protéomique permet d'agrandir les connaissances sur les effets des médicaments à un niveau inférieur de l'organisation biologique et ainsi, de mieux comprendre de potentiels mécanismes d'action ou de déterminer de potentiels biomarqueurs. Finalement, il semble important de discuter de l'opportunité de mesurer les concentrations qui sont testées en écotoxicologie afin de ne pas sous-estimer le risque pour la faune et la flore aquatique.

A post-processing pipeline to reconstruct the developing fetal brain using low-resolution MRI

Introduction. Development of the fetal brain surfacewith concomitant gyrification is one of the majormaturational processes of the human brain. Firstdelineated by postmortem studies or by ultrasound, MRIhas recently become a powerful tool for studying in vivothe structural correlates of brain maturation. However,the quantitative measurement of fetal brain developmentis a major challenge because of the movement of the fetusinside the amniotic cavity, the poor spatial resolution,the partial volume effect and the changing appearance ofthe developing brain. Today extensive efforts are made todeal with the âeurooepost-acquisitionâeuro reconstruction ofhigh-resolution 3D fetal volumes based on severalacquisitions with lower resolution (Rousseau, F., 2006;Jiang, S., 2007). We here propose a framework devoted tothe segmentation of the basal ganglia, the gray-whitetissue segmentation, and in turn the 3D corticalreconstruction of the fetal brain. Method. Prenatal MRimaging was performed with a 1-T system (GE MedicalSystems, Milwaukee) using single shot fast spin echo(ssFSE) sequences in fetuses aged from 29 to 32gestational weeks (slice thickness 5.4mm, in planespatial resolution 1.09mm). For each fetus, 6 axialvolumes shifted by 1 mm were acquired (about 1 min pervolume). First, each volume is manually segmented toextract fetal brain from surrounding fetal and maternaltissues. Inhomogeneity intensity correction and linearintensity normalization are then performed. A highspatial resolution image of isotropic voxel size of 1.09mm is created for each fetus as previously published byothers (Rousseau, F., 2006). B-splines are used for thescattered data interpolation (Lee, 1997). Then, basalganglia segmentation is performed on this superreconstructed volume using active contour framework witha Level Set implementation (Bach Cuadra, M., 2010). Oncebasal ganglia are removed from the image, brain tissuesegmentation is performed (Bach Cuadra, M., 2009). Theresulting white matter image is then binarized andfurther given as an input in the Freesurfer software(http://surfer.nmr.mgh.harvard.edu/) to provide accuratethree-dimensional reconstructions of the fetal brain.Results. High-resolution images of the cerebral fetalbrain, as obtained from the low-resolution acquired MRI,are presented for 4 subjects of age ranging from 29 to 32GA. An example is depicted in Figure 1. Accuracy in theautomated basal ganglia segmentation is compared withmanual segmentation using measurement of Dice similarity(DSI), with values above 0.7 considering to be a verygood agreement. In our sample we observed DSI valuesbetween 0.785 and 0.856. We further show the results ofgray-white matter segmentation overlaid on thehigh-resolution gray-scale images. The results arevisually checked for accuracy using the same principlesas commonly accepted in adult neuroimaging. Preliminary3D cortical reconstructions of the fetal brain are shownin Figure 2. Conclusion. We hereby present a completepipeline for the automated extraction of accuratethree-dimensional cortical surface of the fetal brain.These results are preliminary but promising, with theultimate goal to provide âeurooemovieâeuro of the normal gyraldevelopment. In turn, a precise knowledge of the normalfetal brain development will allow the quantification ofsubtle and early but clinically relevant deviations.Moreover, a precise understanding of the gyraldevelopment process may help to build hypotheses tounderstand the pathogenesis of several neurodevelopmentalconditions in which gyrification have been shown to bealtered (e.g. schizophrenia, autismâeuro¦). References.Rousseau, F. (2006), 'Registration-Based Approach forReconstruction of High-Resolution In Utero Fetal MR Brainimages', IEEE Transactions on Medical Imaging, vol. 13,no. 9, pp. 1072-1081. Jiang, S. (2007), 'MRI of MovingSubjects Using Multislice Snapshot Images With VolumeReconstruction (SVR): Application to Fetal, Neonatal, andAdult Brain Studies', IEEE Transactions on MedicalImaging, vol. 26, no. 7, pp. 967-980. Lee, S. (1997),'Scattered data interpolation with multilevel B-splines',IEEE Transactions on Visualization and Computer Graphics,vol. 3, no. 3, pp. 228-244. Bach Cuadra, M. (2010),'Central and Cortical Gray Mater Segmentation of MagneticResonance Images of the Fetal Brain', ISMRM Conference.Bach Cuadra, M. (2009), 'Brain tissue segmentation offetal MR images', MICCAI.

Pediatric CT: how to compare the Present DRL Values? : 12.10

Purpose: To determine dose thresholds, in term of CTDIvol, where subtle anatomical structures of pediatric CT images becomes no more detectable and compare them to the most recent Reference Dose Levels (DRL) proposed in the UK, Germany and Switzerland. Materials and methods: A GE LightSpeed-Ultra scanner (MSCT 8 slices) was used to perform chest and abdomen acquisitions on 8 patients (age range 2 to 16 years old) to provide a set of gold standard images. Dose reductions were then simulated by introducing image noise on raw data to provide simulated CT images with CTDIvol ranging from 2 to 22 mGy. All images were reviewed and scored independently by four experienced radiologists using the VGA methodology (Visual Grading Analysis) to determine the dose threshold where a significant loss of normal anatomy conspicuity appeared. Data were analyzed with ANOVA and Tukey HSD tests, a p >0.05 was considered to be significant. Results: No significant difference in VGA scoring appeared for CTDIvol leading to image noise levels lower than 10 and 25 HU for respectively abdominal and chest acquisitions. These data can thus be used to set the AEC (automatic exposure control) system of units having similar noise properties than the GE LightSpeed-Ultra used in this study. The present DRLs proposed for pediatric CT acquisitions are compatible with an excellent image quality level. Conclusion: The differences of DRL values proposed in Europe for pediatric acquisitions are marginal and assure a very good image quality level. The results of this study allow to further optimize the acquisition protocol by giving Noise Index value to set the AEC device.

Bridge to life: the Lifebridge B2T extracorporeal life support system in an in vitro trial.

Extracorporeal life support systems (ECLS) have become common in cardiothoracic surgery, but are still "Terra Incognita" in other medical fields due to the fact that perfusion units are normally bound to cardiothoracic centres. The Lifebridge B2T is an ECLS that is meant to be used as an easy and fast-track extracorporeal cardiac support to provide short-term perfusion for the transport of a patient to a specialized centre. With the Lifebridge B2T it is now possible to provide extracorporeal bypass for patients in hospitals without a perfusion unit. The Lifebridge B2T was tested on three calves to analyze the handling, performance and security of this system. The Lifebridge B2T safely can be used clinically and can provide full extracorporeal support for patients in cardiac or pulmonary failure. Flows up to 3.9 +/- 0.2l/min were reached, with an inflow pressure of -103 +/- 13mmHg, using a 21Fr. BioMedicus (Medtronic, Minneapolis, MN, USA) venous cannula. The "Plug and Play" philosophy, with semi-automatic priming, integrated check-list, a long battery time of over two hours and instinctively designed user interface, makes this device very interesting for units with high-risk interventions, such as catheterisation labs. If a system is necessary in an emergency unit, the Lifebridge can provide a high security level, even in centres not acquainted with cardiopulmonary bypass.

Using register data to assess the impact of response enhancement methods on the risk of nonresponse bias and survey costs

The pursuit of high response rates to minimise the threat of nonresponse bias continues to dominate decisions about resource allocation in survey research. Yet a growing body of research has begun to question this practice. In this study, we use previously unavailable data from a new sampling frame based on population registers to assess the value of different methods designed to increase response rates on the European Social Survey in Switzerland. Using sampling data provides information about both respondents and nonrespondents, making it possible to examine how changes in response rates resulting from the use of different fieldwork methods relate to changes in the composition and representativeness of the responding sample. We compute an R-indicator to assess representativity with respect to the sampling register variables, and find little improvement in the sample composition as response rates increase. We then examine the impact of response rate increases on the risk of nonresponse bias based on Maximal Absolute Bias (MAB), and coefficients of variation between subgroup response rates, alongside the associated costs of different types of fieldwork effort. The results show that increases in response rate help to reduce MAB, while only small but important improvements to sample representativity are gained by varying the type of effort. These findings lend further support to research that has called into question the value of extensive investment in procedures aimed at reaching response rate targets and the need for more tailored fieldwork strategies aimed both at reducing survey costs and minimising the risk of bias.