Regional-scale integration of multi-scale hydrological and geophysical data using a two-step Bayesian sequential simulation approach

Significant progress has been made with regard to the quantitative integration of geophysical and hydrological data at the local scale for the purpose of improving predictions of groundwater flow and solute transport. However, extending corresponding approaches to the regional scale still represents one of the major challenges in the domain of hydrogeophysics. To address this problem, we have developed a regional-scale data integration methodology based on a two-step Bayesian sequential simulation approach. Our objective is to generate high-resolution stochastic realizations of the regional-scale hydraulic conductivity field in the common case where there exist spatially exhaustive but poorly resolved measurements of a related geophysical parameter, as well as highly resolved but spatially sparse collocated measurements of this geophysical parameter and the hydraulic conductivity. To integrate this multi-scale, multi-parameter database, we first link the low- and high-resolution geophysical data via a stochastic downscaling procedure. This is followed by relating the downscaled geophysical data to the high-resolution hydraulic conductivity distribution. After outlining the general methodology of the approach, we demonstrate its application to a realistic synthetic example where we consider as data high-resolution measurements of the hydraulic and electrical conductivities at a small number of borehole locations, as well as spatially exhaustive, low-resolution estimates of the electrical conductivity obtained from surface-based electrical resistivity tomography. The different stochastic realizations of the hydraulic conductivity field obtained using our procedure are validated by comparing their solute transport behaviour with that of the underlying ?true? hydraulic conductivity field. We find that, even in the presence of strong subsurface heterogeneity, our proposed procedure allows for the generation of faithful representations of the regional-scale hydraulic conductivity structure and reliable predictions of solute transport over long, regional-scale distances.

Use of high-resolution geophysical data to characterize heterogeneous aquifers: influence of data integration method on hydrological predictions

The integration of geophysical data into the subsurface characterization problem has been shown in many cases to significantly improve hydrological knowledge by providing information at spatial scales and locations that is unattainable using conventional hydrological measurement techniques. The investigation of exactly how much benefit can be brought by geophysical data in terms of its effect on hydrological predictions, however, has received considerably less attention in the literature. Here, we examine the potential hydrological benefits brought by a recently introduced simulated annealing (SA) conditional stochastic simulation method designed for the assimilation of diverse hydrogeophysical data sets. We consider the specific case of integrating crosshole ground-penetrating radar (GPR) and borehole porosity log data to characterize the porosity distribution in saturated heterogeneous aquifers. In many cases, porosity is linked to hydraulic conductivity and thus to flow and transport behavior. To perform our evaluation, we first generate a number of synthetic porosity fields exhibiting varying degrees of spatial continuity and structural complexity. Next, we simulate the collection of crosshole GPR data between several boreholes in these fields, and the collection of porosity log data at the borehole locations. The inverted GPR data, together with the porosity logs, are then used to reconstruct the porosity field using the SA-based method, along with a number of other more elementary approaches. Assuming that the grid-cell-scale relationship between porosity and hydraulic conductivity is unique and known, the porosity realizations are then used in groundwater flow and contaminant transport simulations to assess the benefits and limitations of the different approaches.

Toward an integration of spirituality and religiousness into the psychosocial dimension of schizophrenia.

OBJECTIVE: Spirituality and religiousness have been shown to be highly prevalent among patients with schizophrenia. However, clinicians are rarely aware of the importance of religion and understand little of the value or difficulties it presents to treatment. This study aimed to assess the role of religion as a mediating variable in the process of coping with psychotic illness. METHOD: Semistructured interviews about religious coping were conducted with a sample of 115 outpatients with psychotic illness. RESULTS: For some patients, religion instilled hope, purpose, and meaning in their lives (71%), whereas for others, it induced spiritual despair (14%). Patients also reported that religion lessened (54%) or increased (10%) psychotic and general symptoms. Religion was also reported to increase social integration (28%) or social isolation (3%). It may reduce (33%) or increase (10%) the risk of suicide attempts, reduce (14%) or increase (3%) substance use, and foster adherence to (16%) or be in opposition to (15%) psychiatric treatment. CONCLUSIONS: Our results highlight the clinical significance of religion in the care of patients with schizophrenia. Religion is neither a strictly personal matter nor a strictly cultural one. Spirituality should be integrated into the psychosocial dimension of care. Our results suggest that the complexity of the relationship between religion and illness requires a highly sensitive approach to each unique story.

Retroviral Integration Site Selection

The stable insertion of a copy of their genome into the host cell genome is an essential step of the life cycle of retroviruses. The site of viral DNA integration, mediated by the viral-encoded integrase enzyme, has important consequences for both the virus and the host cell. The analysis of retroviral integration site distribution was facilitated by the availability of the human genome sequence, revealing the non-random feature of integration site selection and identifying different favored and disfavored genomic locations for individual retroviruses. This review will summarize the current knowledge about retroviral differences in their integration site preferences as well as the mechanisms involved in this process.

Imputation in data fusion of heterogeneous data sets a model-based numerical experiment

Given the very large amount of data obtained everyday through population surveys, much of the new research again could use this information instead of collecting new samples. Unfortunately, relevant data are often disseminated into different files obtained through different sampling designs. Data fusion is a set of methods used to combine information from different sources into a single dataset. In this article, we are interested in a specific problem: the fusion of two data files, one of which being quite small. We propose a model-based procedure combining a logistic regression with an Expectation-Maximization algorithm. Results show that despite the lack of data, this procedure can perform better than standard matching procedures.

Selective integration of auditory-visual looming cues by humans.

An object's motion relative to an observer can confer ethologically meaningful information. Approaching or looming stimuli can signal threats/collisions to be avoided or prey to be confronted, whereas receding stimuli can signal successful escape or failed pursuit. Using movement detection and subjective ratings, we investigated the multisensory integration of looming and receding auditory and visual information by humans. While prior research has demonstrated a perceptual bias for unisensory and more recently multisensory looming stimuli, none has investigated whether there is integration of looming signals between modalities. Our findings reveal selective integration of multisensory looming stimuli. Performance was significantly enhanced for looming stimuli over all other multisensory conditions. Contrasts with static multisensory conditions indicate that only multisensory looming stimuli resulted in facilitation beyond that induced by the sheer presence of auditory-visual stimuli. Controlling for variation in physical energy replicated the advantage for multisensory looming stimuli. Finally, only looming stimuli exhibited a negative linear relationship between enhancement indices for detection speed and for subjective ratings. Maximal detection speed was attained when motion perception was already robust under unisensory conditions. The preferential integration of multisensory looming stimuli highlights that complex ethologically salient stimuli likely require synergistic cooperation between existing principles of multisensory integration. A new conceptualization of the neurophysiologic mechanisms mediating real-world multisensory perceptions and action is therefore supported.

Increased audiovisual integration in cochlear-implanted deaf patients: independent components analysis of longitudinal positron emission tomography data.

It has been demonstrated in earlier studies that patients with a cochlear implant have increased abilities for audio-visual integration because the crude information transmitted by the cochlear implant requires the persistent use of the complementary speech information from the visual channel. The brain network for these abilities needs to be clarified. We used an independent components analysis (ICA) of the activation (H2 (15) O) positron emission tomography data to explore occipito-temporal brain activity in post-lingually deaf patients with unilaterally implanted cochlear implants at several months post-implantation (T1), shortly after implantation (T0) and in normal hearing controls. In between-group analysis, patients at T1 had greater blood flow in the left middle temporal cortex as compared with T0 and normal hearing controls. In within-group analysis, patients at T0 had a task-related ICA component in the visual cortex, and patients at T1 had one task-related ICA component in the left middle temporal cortex and the other in the visual cortex. The time courses of temporal and visual activities during the positron emission tomography examination at T1 were highly correlated, meaning that synchronized integrative activity occurred. The greater involvement of the visual cortex and its close coupling with the temporal cortex at T1 confirm the importance of audio-visual integration in more experienced cochlear implant subjects at the cortical level.

Interrogation of related clinical pan-azole-resistant Aspergillus fumigatus strains: G138C, Y431C, and G434C single nucleotide polymorphisms in cyp51A, upregulation of cyp51A, and integration and activation of transposon Atf1 in the cyp51A promoter.

Multiple Aspergillus fumigatus isolates from a patient with two aspergillomas complicating chronic pulmonary aspergillosis were pan-azole resistant. Microsatellite typing was identical for all isolates despite major phenotypic and some growth rate differences. Three different cyp51A mutations were found (G138C, Y431C, and G434C), of which the first two were demonstrated by heterologous expression in a hypersusceptible Saccharomyces cerevisiae strain to be at least partly responsible for elevated MICs. cyp51A and cyp51B gene duplication was excluded, but increased expression of cyp51A was demonstrated in three isolates selected for additional study (7-to 13-fold increases). In the isolate with the greatest cyp51A expression, an Aft1 transposon was found inserted 370 bp upstream of the start codon of the cyp51A gene, an integration location never previously demonstrated in Aspergillus. Two transcription start sites were identified at 49 and 136 bp upstream of the start codon. The role of the Aft1 transposon, if any, in modulating cyp51A expression remains to be established. Increased mRNA expression of the transporters AfuMDR1 and AfuMDR4 also was demonstrated in some isolates, which could contribute to azole resistance or simply represent a stress response. The diversity of confirmed and possible azole resistance mechanisms demonstrated in a single series of isogenic isolates is remarkable, indicating the ability of A. fumigatus to adapt in the clinical setting.

Segmentation and grid generation for numerical simulations of vad connections with patient-specific data

Objectives: We are interested in the numerical simulation of the anastomotic region comprised between outflow canula of LVAD and the aorta. Segmenta¬tion, geometry reconstruction and grid generation from patient-specific data remain an issue because of the variable quality of DICOM images, in particular CT-scan (e.g. metallic noise of the device, non-aortic contrast phase). We pro¬pose a general framework to overcome this problem and create suitable grids for numerical simulations.Methods: Preliminary treatment of images is performed by reducing the level window and enhancing the contrast of the greyscale image using contrast-limited adaptive histogram equalization. A gradient anisotropic diffusion filter is applied to reduce the noise. Then, watershed segmentation algorithms and mathematical morphology filters allow reconstructing the patient geometry. This is done using the InsightToolKit library (www.itk.org). Finally the Vascular Model¬ing ToolKit (www.vmtk.org) and gmsh (www.geuz.org/gmsh) are used to create the meshes for the fluid (blood) and structure (arterial wall, outflow canula) and to a priori identify the boundary layers. The method is tested on five different patients with left ventricular assistance and who underwent a CT-scan exam.Results: This method produced good results in four patients. The anastomosis area is recovered and the generated grids are suitable for numerical simulations. In one patient the method failed to produce a good segmentation because of the small dimension of the aortic arch with respect to the image resolution.Conclusions: The described framework allows the use of data that could not be otherwise segmented by standard automatic segmentation tools. In particular the computational grids that have been generated are suitable for simulations that take into account fluid-structure interactions. Finally the presented method features a good reproducibility and fast application.