37 resultados para Murray, Les A. (Les Allan), 1938- -- Criticism and interpretation
Resumo:
Due to various contexts and processes, forensic science communities may have different approaches, largely influenced by their criminal justice systems. However, forensic science practices share some common characteristics. One is the assurance of a high (scientific) quality within processes and practices. For most crime laboratory directors and forensic science associations, this issue is conditioned by the triangle of quality, which represents the current paradigm of quality assurance in the field. It consists of the implementation of standardization, certification, accreditation, and an evaluation process. It constitutes a clear and sound way to exchange data between laboratories and enables databasing due to standardized methods ensuring reliable and valid results; but it is also a means of defining minimum requirements for practitioners' skills for specific forensic science activities. The control of each of these aspects offers non-forensic science partners the assurance that the entire process has been mastered and is trustworthy. Most of the standards focus on the analysis stage and do not consider pre- and post-laboratory stages, namely, the work achieved at the investigation scene and the evaluation and interpretation of the results, intended for intelligence beneficiaries or for court. Such localized consideration prevents forensic practitioners from identifying where the problems really lie with regard to criminal justice systems. According to a performance-management approach, scientific quality should not be restricted to standardized procedures and controls in forensic science practice. Ensuring high quality also strongly depends on the way a forensic science culture is assimilated (into specific education training and workplaces) and in the way practitioners understand forensic science as a whole.
Resumo:
The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner. With the mass marketing of laser printers and the popularity of rollerball pens, the determination of line crossing sequences between such instruments is encountered by forensic document examiners. This type of crossing presents difficulties with optical microscopic line crossing techniques involving ballpoint pens or gel pens and toner (1-4). Indeed, the rollerball's aqueous ink penetrates through the toner and is absorbed by the fibers of the paper, leaving the examiner with the impression that the toner is above the ink even when it is not (5). Novotny and Westwood (3) investigated the possibility of determining aqueous ink and toner crossing sequences by microscopic observation of the intersection before and after toner removal. A major disadvantage of their study resides in destruction of the sample by scraping off the toner line to see what was underneath. The aim of this research was to investigate the ways to overcome these difficulties through digital microscopy and three-dimensional (3-D) laser profilometry. The former was used as a technique for the determination of sequences between gel pen and toner printing strokes, but provided less conclusive results than that of an optical stereomicroscope (4). 3-D laser profilometry, which allows one to observe and measure the topography of a surface, has been the subject of a number of recent studies in this area. Berx and De Kinder (6) and Schirripa Spagnolo (7,8) have tested the application of laser profilometry to determine the sequence of intersections of several lines. The results obtained in these studies overcome disadvantages of other methods applied in this area, such as scanning electron microscope or the atomic force microscope. The main advantages of 3-D laser profilometry include the ease of implementation of the technique and its nondestructive nature, which does not require sample preparation (8-10). Moreover, the technique is reproducible and presents a high degree of freedom in the vertical axes (up to 1000 μm). However, when the paper surface presents a given roughness, if the pen impressions alter the paper with a depth similar to the roughness of medium, the results are not always conclusive (8). It becomes difficult in this case to distinguish which characteristics can be imputed to the pen impressions or the quality of the paper surface. This important limitation is assessed by testing different types of paper of variable quality (of different grammage and finishing) and the writing pressure. The authors will therefore assess the limits of 3-D laser profilometry technique and determine whether the method can overcome such constraints. Second, the authors will investigate the use of digital microscopy because it presents a number of advantages: it is efficient, user-friendly, and provides an objective evaluation and interpretation.
Resumo:
OBJECTIVE: Few epidemiological studies have addressed the health of workers exposed to novel manufactured nanomaterials. The small current workforce will necessitate pooling international cohorts. METHOD: A road map was defined for a globally harmonized framework for the careful choice of materials, exposure characterization, identification of study populations, definition of health endpoints, evaluation of appropriateness of study designs, data collection and analysis, and interpretation of the results. RESULTS: We propose a road map to reach global consensus on these issues. The proposed strategy should ensure that the costs of action are not disproportionate to the potential benefits and that the approach is pragmatic and practical. CONCLUSIONS: We should aim to go beyond the collection of health complaints, illness statistics, or even counts of deaths; the manifestation of such clear endpoints would indicate a failure of preventive measures.
Resumo:
Inhibition of tumor angiogenesis suppresses tumor growth and metastatic spreading in many experimental models, suggesting that anti-angiogenic drugs may be used to treat human cancer. During the past decade more than eighty molecules that showed anti-angiogenic activity in preclinical studies were tested in clinical cancer trials, but most of them failed to demonstrate any measurable anti-tumor activity and none have been approved for clinical use. Recent results stemming from trials with anti-VEGF antibodies, used alone or in combination with chemotherapy, suggest that systemic anti-angiogenic therapy may indeed have a measurable impact on cancer progression and patient survival. From the clinical studies it became nevertheless clear that the classical endpoints used in anti-cancer trials do not bring sufficient discriminative power to monitor the effects of anti-angiogenic drugs. It is therefore necessary to identify and validate molecular, cellular and functional surrogate markers of angiogenesis to monitor activity and efficacy of anti-angiogenic drugs in patients. Availability of such markers will be instrumental to re-evaluate the role of tumor angiogenesis in human cancer, to identify new molecular targets and drugs, and to improve planning, monitoring and interpretation of future studies. Future anti-angiogenesis trials integrating biological endpoints and surrogate markers or angiogenesis will require close collaboration between clinical investigators and laboratory-based researchers.
Resumo:
Background: Primary care physicians are often requested to assess their patients' fitness to drive. Little is however known on their needs to help them in this task. Aims: The aim of this study is to develop theories on needs, expectations, and barriers for clinical instruments helping physicians assess fitness to drive in primary care. Methods: This qualitative study used semi-structured interviews to investigate needs and expectations for instruments used to assess fitness to drive. From August 2011 to April 2013, we recorded opinions from five experts in traffic medicine, five primary care physicians, and five senior drivers. All interviews were integrally transcribed. Two independent researchers extracted, coded, and stratified categories relying on multi-grounded theory. All participants validated the final scheme. Results: Our theory suggests that for an instruments assessing fitness to drive to be implemented in primary care, it need to contribute to the decisional process. This requires at least five conditions: 1) it needs to reduce the range of uncertainty, 2) it needs to be adapted to local resources and possibilities, 3) it needs to be accepted by patients, 4) choices of tasks need to adaptable to clinical conditions, 5) and interpretation of results need to remain dependant of each patient's context. Discussion and conclusions: Most existing instruments assessing fitness to drive are not designed for primary care settings. Future instruments should also aim to support patient-centred dialogue, help anticipate driving cessation, and offer patients the opportunity to freely take their own decision on driving cessation as often as possible.
Resumo:
It is well established that cancer cells can recruit CD11b(+) myeloid cells to promote tumor angiogenesis and tumor growth. Increasing interest has emerged on the identification of subpopulations of tumor-infiltrating CD11b(+) myeloid cells using flow cytometry techniques. In the literature, however, discrepancies exist on the phenotype of these cells (Coffelt et al., Am J Pathol 2010;176:1564-1576). Since flow cytometry analysis requires particular precautions for accurate sample preparation and trustable data acquisition, analysis, and interpretation, some discrepancies might be due to technical reasons rather than biological grounds. We used the syngenic orthotopic 4T1 mammary tumor model in immunocompetent BALB/c mice to analyze and compare the phenotype of CD11b(+) myeloid cells isolated from peripheral blood and from tumors, using six-color flow cytometry. We report here that the nonspecific antibody binding through Fc receptors, the presence of dead cells and cell doublets in tumor-derived samples concur to generate artifacts in the phenotype of tumor-infiltrating CD11b(+) subpopulations. We show that the heterogeneity of tumor-infiltrating CD11b(+) subpopulations analyzed without particular precautions was greatly reduced upon Fc block treatment, dead cells, and cell doublets exclusion. Phenotyping of tumor-infiltrating CD11b(+) cells was particularly sensitive to these parameters compared to circulating CD11b(+) cells. Taken together, our results identify Fc block treatment, dead cells, and cell doublets exclusion as simple but crucial steps for the proper analysis of tumor-infiltrating CD11b(+) cell populations.
Resumo:
Background: Endometriosis is an estrogen-dependent, pro-inflammatory, pro-angiogenic condition that affects 5 to 10% of women of reproductive age. Its defining feature is the presence of endometrium-like tissue in sites outside the uterine cavity, primarily on the pelvic peritoneum and ovaries. The main clinical features are chronic pain, pain during intercourse and infertility. In patients with endometriosis, inflammatory and immune responses, angiogenesis and apoptosis are altered in favour of the survival and replenishment of endometriotic tissue. These basic pathological processes depend on the excessive formation of estrogen and prostaglandins. Recently, new cellular and molecular mechanisms for the resolution of inflammation have been discovered, revealing key roles for lipid mediators such as lipoxins, resolvins and protectins. It is possible that disequilibrium in the expression of these molecules exists in endometriosis. Objective: To compare the expression of two proteins involved in the synthe sis and in the function of lipid mediators; the Arachidonate 15-lipoxygenase (ALOXI5), implicated in the synthesis of lipoxins A4 and B4 and the Formyl peptide receptor 1 (FPRLI), the specific receptor for Lipoxin A4 and B4, between women who suffer from endometriosis and a control group. We wish to demonstrate the cellular localisation of these two molecules and to investigate if their expression is alteted in this pathology. Methods and Materials Using immunohistochemistry we will compare ALOXI5 and FPRLI staining, in endometrium, normal peritoneum and endometriotic lesions. The samples are being collected in the department of Gynaecology and Obstetrics at the Centre Hospitalier Universitaire Lausanne (CHUV). Women attending the department for laparoscopic investigation of pain/infertility, suspected endometriosis or for a hysterectomy, are invited to participate. Approval of the ethics committee (Commission d'Ethique de la recherché clinique) was obtained in March 2009. Clinical samples will only be obtained from subjects having consented. Expected results and interpretation: No published studies investigating the expression of these two molecules in endometriotic lesions exist. A better understanding of the mechanisms underlying this disease will result in the development of new medical therapies and new diagnostic tests, with the aim of ameliorating the quality of life of endometriosis patients.