Contribution à la cartographie géomorphologique de la dynamique sédimentaire des petits bassins versants torrentiels

Les laves torrentielles sont l'un des vecteurs majeurs de sédiments en milieu montagneux. Leur comportement hydrogéomorphologique est contrôlé par des facteurs géologique, géomorphologique, topographique, hydrologique, climatique et anthropique. Si, en Europe, la recherche s'est plus focalisée sur les aspects hydrologiques que géomorphologiques de ces phénomènes, l'identification des volumes de sédiments potentiellement mobilisables au sein de petits systèmes torrentiels et des processus responsables de leur transfert est d'une importance très grande en termes d'aménagement du territoire et de gestion des dangers naturels. De plus, une corrélation entre des événements pluviométriques et l'occurrence de laves torrentielles n'est pas toujours établie et de nombreux événements torrentiels semblent se déclencher lorsqu'un seuil géomorphologique intrinsèque (degré de remplissage du chenal) au cours d'eau est atteint.Une méthodologie pragmatique a été développée pour cartographier les stocks sédimentaires constituant une source de matériaux pour les laves torrentielles, comme outil préliminaire à la quantification des volumes transportés par ces phénomènes. La méthode s'appuie sur des données dérivées directement d'analyses en environnement SIG réalisées sur des modèles numériques d'altitude de haute précision, de mesures de terrain et d'interprétation de photographies aériennes. La méthode a été conçue pour évaluer la dynamique des transferts sédimentaires, en prenant en compte le rôle des différents réservoirs sédimentaires, par l'application du concept de cascade sédimentaire sous un angle cartographique.Les processus de transferts sédimentaires ont été étudiés dans deux bassins versants des Alpes suisses (torrent du Bruchi, à Blatten beiNaters et torrent du Meretschibach, à Agarn). La cartographie géomorphologique a été couplée avec des mesures complémentaires permettant d'estimer les flux sédimentaires et les taux d'érosion (traçages de peinture, piquets de dénudation et utilisation du LiDAR terrestre). La méthode proposée se révèle innovatrice en comparaison avec la plupart des systèmes de légendes géomorphologiques existants, qui ne sont souvent pas adaptés pour cartographier de manière satisfaisante les systèmes géomorphologiques complexes et actifs que sont les bassins torrentiels. L'intérêt de cette méthode est qu'elle permet l'établissement d'une cascade sédimentaire, mais uniquement pour des systèmes où l'occurrence d'une lave torrentielle est contrôlé par le degré de remplissage en matériaux du chenal. Par ailleurs, le produit cartographique ne peut être directement utilisé pour la création de cartes de dangers - axées sur les zones de dépôt - mais revêt un intérêt pour la mise en place de mesures de correction et pour l'installation de systèmes de monitoring ou d'alerte.La deuxième partie de ce travail de recherche est consacrée à la cartographie géomorphologique. Une analyse a porté sur un échantillon de 146 cartes ou systèmes de légende datant des années 1950 à 2009 et réalisés dans plus de 40 pays. Cette analyse a permis de mettre en évidence la diversité des applications et des techniques d'élaboration des cartes géomorphologiques. - Debris flows are one of the most important vectors of sediment transfer in mountainous areas. Their hydro-geomorphological behaviour is conditioned by geological, geomorphological, topographical, hydrological, climatic and anthropic factors. European research in torrential systems has focused more on hydrological processes than on geomorphological processes acting as debris flow triggers. Nevertheless, the identification of sediment volumes that have the potential to be mobilised in small torrential systems, as well as the recognition of processes responsible for their mobilisation and transfer within the torrential system, are important in terms of land-use planning and natural hazard management. Moreover, a correlation between rainfall and debris flow occurrence is not always established and a number of debris flows seems to occur when a poorly understood geomorphological threshold is reached.A pragmatic methodology has been developed for mapping sediment storages that may constitute source zone of bed load transport and debris flows as a preliminary tool before quantifying their volumes. It is based on data directly derived from GIS analysis using high resolution DEM's, field measurements and aerial photograph interpretations. It has been conceived to estimate sediment transfer dynamics, taking into account the role of different sediment stores in the torrential system applying the concept of "sediment cascade" in a cartographic point of view.Sediment transfer processes were investigated in two small catchments in the Swiss Alps (Bruchi torrent, Blatten bei Naters and Meretschibach torrent, Agarn). Thorough field geomorphological mapping coupled with complementary measurements were conducted to estimate sediment fluxes and denudation rates, using various methods (reference coloured lines, wooden markers and terrestrial LiDAR). The proposed geomorphological mapping methodology is quite innovative in comparison with most legend systems that are not adequate for mapping active and complex geomorphological systems such as debris flow catchments. The interest of this mapping method is that it allows the concept of sediment cascade to be spatially implemented but only for supply-limited systems. The map cannot be used directly for the creation of hazard maps, focused on the deposition areas, but for the design of correction measures and the implementation of monitoring and warning systems.The second part of this work focuses on geomorphological mapping. An analysis of a sample of 146 (extracts of) maps or legend systems dating from the middle of the 20th century to 2009 - realised in more than 40 different countries - was carried out. Even if this study is not exhaustive, it shows a clear renewed interest for the discipline worldwide. It highlights the diversity of applications, techniques (scale, colours and symbology) used for their conception.

Genotyping microarray for CSNB-associated genes.

PURPOSE: Congenital stationary night blindness (CSNB) is a clinically and genetically heterogeneous retinal disease. Although electroretinographic (ERG) measurements can discriminate clinical subgroups, the identification of the underlying genetic defects has been complicated for CSNB because of genetic heterogeneity, the uncertainty about the mode of inheritance, and time-consuming and costly mutation scanning and direct sequencing approaches. METHODS: To overcome these challenges and to generate a time- and cost-efficient mutation screening tool, the authors developed a CSNB genotyping microarray with arrayed primer extension (APEX) technology. To cover as many mutations as possible, a comprehensive literature search was performed, and DNA samples from a cohort of patients with CSNB were first sequenced directly in known CSNB genes. Subsequently, oligonucleotides were designed representing 126 sequence variations in RHO, CABP4, CACNA1F, CACNA2D4, GNAT1, GRM6, NYX, PDE6B, and SAG and spotted on the chip. RESULTS: Direct sequencing of genes known to be associated with CSNB in the study cohort revealed 21 mutations (12 novel and 9 previously reported). The resultant microarray containing oligonucleotides, which allow to detect 126 known and novel mutations, was 100% effective in determining the expected sequence changes in all known samples assessed. In addition, investigation of 34 patients with CSNB who were previously not genotyped revealed sequence variants in 18%, of which 15% are thought to be disease-causing mutations. CONCLUSIONS: This relatively inexpensive first-pass genetic testing device for patients with a diagnosis of CSNB will improve molecular diagnostics and genetic counseling of patients and their families and gives the opportunity to analyze whether, for example, more progressive disorders such as cone or cone-rod dystrophies underlie the same gene defects.

Epidemiology of cleft palate in Europe: implications for genetic research.

OBJECTIVE: To describe the epidemiology of cleft palate (CP) in Europe. DESIGN AND SETTING: A descriptive epidemiological study on 3852 cases of CP, identified (1980 through 1996) from more than 6 million births from the EUROCAT network of 30 registers in 16 European countries. RESULTS: Significant differences in prevalence in Europe between registries and within countries were observed. A total of 2112 (54.8%) CP cases occurred as isolated, 694 (18.0%) were associated with other defects such as multiple congenital anomalies, and 1046 (27.2%) were in recognized conditions. The study confirmed the tendency toward female prevalence (sex ratio [SR] = 0.83), particularly among isolated cases (SR = 0.78) even if SR inversion is reported in some registries. A specific association with neural tube defects (NTDs) in some registers is reported. CONCLUSION: The differences identified in Europe (prevalence, sex, associated anomalies) can be only partially explained by methodological reasons because a common methodology was shared among all registries for case ascertainment and collection, and CP is an easy detectable condition with few induced abortions. The complex model of inheritance and the frequently conflicting results in different populations on the role of genes that constitute risk factors suggest the presence of real biological differences. The association of CP/NTD in an area with a high prevalence of NTDs can identify a group of conditions that can be considered etiologically homogeneous. The epidemiological evaluation can guide genetic research to specify the role of etiological factors in each different population

Mutations in DNAH5 account for only 15% of a non-preselected cohort of patients with primary ciliary dyskinesia.

BACKGROUND: Primary ciliary dyskinesia (PCD) is characterised by recurrent infections of the upper respiratory airways (nose, bronchi, and frontal sinuses) and randomisation of left-right body asymmetry. To date, PCD is mainly described with autosomal recessive inheritance and mutations have been found in five genes: the dynein arm protein subunits DNAI1, DNAH5 and DNAH11, the kinase TXNDC3, and the X-linked retinitis pigmentosa GTPase regulator RPGR. METHODS: We screened 89 unrelated individuals with PCD for mutations in the coding and splice site regions of the gene DNAH5 by denaturing high performance liquid chromatography (DHPLC) and sequencing. Patients were mainly of European origin and were recruited without any phenotypic preselection. RESULTS: We identified 18 novel (nonsense, splicing, small deletion and missense) and six previously described mutations. Interestingly, these DNAH5 mutations were mainly associated with outer + inner dyneins arm ultrastructural defects (50%). CONCLUSION: Overall, mutations on both alleles of DNAH5 were identified in 15% of our clinically heterogeneous cohort of patients. Although genetic alterations remain to be identified in most patients, DNAH5 is to date the main PCD gene.

Étude des mécanismes de transfert des fibres en sciences forensiques

RESUME Les fibres textiles sont des produits de masse utilisés dans la fabrication de nombreux objets de notre quotidien. Le transfert de fibres lors d'une action délictueuse est dès lors extrêmement courant. Du fait de leur omniprésence dans notre environnement, il est capital que l'expert forensique évalue la valeur de l'indice fibres. L'interprétation de l'indice fibres passe par la connaissance d'un certain nombre de paramètres, comme la rareté des fibres, la probabilité de leur présence par hasard sur un certain support, ainsi que les mécanismes de transfert et de persistance des fibres. Les lacunes les plus importantes concernent les mécanismes de transfert des fibres. A ce jour, les nombreux auteurs qui se sont penchés sur le transfert de fibres ne sont pas parvenus à créer un modèle permettant de prédire le nombre de fibres que l'on s'attend à retrouver dans des circonstances de contact données, en fonction des différents paramètres caractérisant ce contact et les textiles mis en jeu. Le but principal de cette recherche est de démontrer que la création d'un modèle prédictif du nombre de fibres transférées lors d'un contact donné est possible. Dans le cadre de ce travail, le cas particulier du transfert de fibres d'un tricot en laine ou en acrylique d'un conducteur vers le dossier du siège de son véhicule a été étudié. Plusieurs caractéristiques des textiles mis en jeu lors de ces expériences ont été mesurées. Des outils statistiques (régression linéaire multiple) ont ensuite été utilisés sur ces données afin d'évaluer l'influence des caractéristiques des textiles donneurs sur le nombre de fibres transférées et d'élaborer un modèle permettant de prédire le nombre de fibres qui vont être transférées à l'aide des caractéristiques influençant significativement le transfert. Afin de faciliter la recherche et le comptage des fibres transférées lors des expériences de transfert, un appareil de recherche automatique des fibres (liber finder) a été utilisé dans le cadre de cette recherche. Les tests d'évaluation de l'efficacité de cet appareil pour la recherche de fibres montrent que la recherche automatique est globalement aussi efficace qu'une recherche visuelle pour les fibres fortement colorées. Par contre la recherche automatique perd de son efficacité pour les fibres très pâles ou très foncées. Une des caractéristiques des textiles donneurs à étudier est la longueur des fibres. Afin de pouvoir évaluer ce paramètre, une séquence d'algorithmes de traitement d'image a été implémentée. Cet outil permet la mesure de la longueur d'une fibre à partir de son image numérique à haute résolution (2'540 dpi). Les tests effectués montrent que les mesures ainsi obtenues présentent une erreur de l'ordre du dixième de millimètre, ce qui est largement suffisant pour son utilisation dans le cadre de cette recherche. Les résultats obtenus suite au traitement statistique des résultats des expériences de transfert ont permis d'aboutir à une modélisation du phénomène du transfert. Deux paramètres sont retenus dans le modèle: l'état de la surface du tissu donneur et la longueur des fibres composant le tissu donneur. L'état de la surface du tissu est un paramètre tenant compte de la quantité de fibres qui se sont détachées de la structure du tissu ou qui sont encore faiblement rattachées à celle-ci. En effet, ces fibres sont les premières à se transférer lors d'un contact, et plus la quantité de ces fibres par unité de surface est importante, plus le nombre de fibres transférées sera élevé. La longueur des fibres du tissu donneur est également un paramètre important : plus les fibres sont longues, mieux elles sont retenues dans la structure du tissu et moins elles se transféreront. SUMMARY Fibres are mass products used to produce numerous objects encountered everyday. The transfer of fibres during a criminal action is then very common. Because fibres are omnipresent in our environment, the forensic expert has to evaluate the value of the fibre evidence. To interpret fibre evidence, the expert has to know some parameters as frequency of fibres,' probability of finding extraneous fibres by chance on a given support, and transfer and persistence mechanisms. Fibre transfer is one of the most complex parameter. Many authors studied fibre transfer mechanisms but no model has been created to predict the number of fibres transferred expected in a given type of contact according to parameters as characteristics of the contact and characteristics of textiles. The main purpose of this research is to demonstrate that it is possible to create a model to predict the number of fibres transferred during a contact. In this work, the particular case of the transfer of fibres from a knitted textile in wool or in acrylic of a driver to the back of a carseat has been studied. Several characteristics of the textiles used for the experiments were measured. The data obtained were then treated with statistical tools (multiple linear regression) to evaluate the influence of the donor textile characteristics on the number of úbers transferred, and to create a model to predict this number of fibres transferred by an equation containing the characteristics having a significant influence on the transfer. To make easier the searching and the counting of fibres, an apparatus of automatic search. of fibers (fiber finder) was used. The tests realised to evaluate the efficiency of the fiber finder shows that the results obtained are generally as efficient as for visual search for well-coloured fibres. However, the efficiency of automatic search decreases for pales and dark fibres. One characteristic of the donor textile studied was the length of the fibres. To measure this parameter, a sequence of image processing algorithms was implemented. This tool allows to measure the length of a fibre from it high-resolution (2'540 dpi) numerical image. The tests done shows that the error of the measures obtained are about some tenths of millimetres. This precision is sufficient for this research. The statistical methods applied on the transfer experiment data allow to create a model of the transfer phenomenon. Two parameters are included in the model: the shedding capacity of the donor textile surface and the length of donor textile fibres. The shedding capacity of the donor textile surface is a parameter estimating the quantity of fibres that are not or slightly attached to the structure of the textile. These fibres are easily transferred during a contact, and the more this quantity of fibres is high, the more the number of fibres transferred during the contact is important. The length of fibres is also an important parameter: the more the fibres are long, the more they are attached in the structure of the textile and the less they are transferred during the contact.

Mutations in LONP1, a mitochondrial matrix protease, cause CODAS syndrome.

Cerebral, ocular, dental, auricular, skeletal anomalies (CODAS) syndrome (MIM 600373) was first described and named by Shehib et al, in 1991 in a single patient. The anomalies referred to in the acronym are as follows: cerebral-developmental delay, ocular-cataracts, dental-aberrant cusp morphology and delayed eruption, auricular-malformations of the external ear, and skeletal-spondyloepiphyseal dysplasia. This distinctive constellation of anatomical findings should allow easy recognition but despite this only four apparently sporadic patients have been reported in the last 20 years indicating that the full phenotype is indeed very rare with perhaps milder or a typical presentations that are allelic but without sufficient phenotypic resemblance to permit clinical diagnosis. We performed exome sequencing in three patients (an isolated case and a brother and sister sib pair) with classical features of CODAS. Sanger sequencing was used to confirm results as well as for mutation discovery in a further four unrelated patients ascertained via their skeletal features. Compound heterozygous or homozygous mutations in LONP1 were found in all (8 separate mutations; 6 missense, 1 nonsense, 1 small in-frame deletion) thus establishing the genetic basis of CODAS and the pattern of inheritance (autosomal recessive). LONP1 encodes an enzyme of bacterial ancestry that participates in protein turnover within the mitochondrial matrix. The mutations cluster at the ATP-binding and proteolytic domains of the enzyme. Biallelic inheritance and clustering of mutations confirm dysfunction of LONP1 activity as the molecular basis of CODAS but the pathogenesis remains to be explored.

Inheritance of ductile and brittle structures in the development of large rock slope instabilities: Examples from western Norway

The high density of slope failures in western Norway is due to the steep relief and to the concentration of various structures that followed protracted ductile and brittle tectonics. On the 72 investigated rock slope instabilities, 13 were developed in soft weathered mafic and phyllitic allochthons. Only the intrinsic weakness of such rocks increases the susceptibility to gravitational deformation. In contrast, the gravitational structures in the hard gneisses reactivate prominent ductile or/and brittle fabrics. At 30 rockslides along cataclinal slopes, weak mafic layers of foliation are reactivated as basal planes. Slope-parallel steep foliation forms back-cracks of unstable columns. Folds are specifically present in the Storfjord area, together with a clustering of potential slope failures. Folding increases the probability of having favourably orientated planes with respect to the gravitational forces and the slope. High water pressure is believed to seasonally build up along the shallow-dipping Caledonian detachments and may contribute to destabilization of the rock slope upwards. Regional cataclastic faults localized the gravitational structures at 45 sites. The volume of the slope instabilities tends to increase with the amount of reactivated prominent structures and the spacing of the latter controls the size of instabilities.

Food availability affects the maternal transfer of androgens and antibodies into eggs of a colonial seabird.

Mothers can improve the quality of their offspring by increasing the level of certain components in their eggs. To examine whether or not mothers increase deposition of such components in eggs as a function of food availability, we food-supplemented black-legged kittiwake females (Rissa tridactyla) before and during egg laying and compared deposition of androgens and antibodies into eggs of first and experimentally induced replacement clutches. Food-supplemented females transferred lower amounts of androgens and antibodies into eggs of induced replacement clutches than did non-food-supplemented mothers, whereas first clutches presented no differences between treatments. Our results suggest that when females are in lower condition, they transfer more androgens and antibodies into eggs to facilitate chick development despite potential long-term costs for juveniles. Females in prime condition may avoid these potential long-term costs because they can provide their chicks with more and higher quality resources.