EFNS guidelines on the clinical management of amyotrophic lateral sclerosis (MALS)--revised report of an EFNS task force.

BACKGROUND: The evidence base for the diagnosis and management of amyotrophic lateral sclerosis (ALS) is weak. OBJECTIVES: To provide evidence-based or expert recommendations for the diagnosis and management of ALS based on a literature search and the consensus of an expert panel. METHODS: All available medical reference systems were searched, and original papers, meta-analyses, review papers, book chapters and guidelines recommendations were reviewed. The final literature search was performed in February 2011. Recommendations were reached by consensus. RECOMMENDATIONS: Patients with symptoms suggestive of ALS should be assessed as soon as possible by an experienced neurologist. Early diagnosis should be pursued, and investigations, including neurophysiology, performed with a high priority. The patient should be informed of the diagnosis by a consultant with a good knowledge of the patient and the disease. Following diagnosis, the patient and relatives/carers should receive regular support from a multidisciplinary care team. Medication with riluzole should be initiated as early as possible. Control of symptoms such as sialorrhoea, thick mucus, emotional lability, cramps, spasticity and pain should be attempted. Percutaneous endoscopic gastrostomy feeding improves nutrition and quality of life, and gastrostomy tubes should be placed before respiratory insufficiency develops. Non-invasive positive-pressure ventilation also improves survival and quality of life. Maintaining the patient's ability to communicate is essential. During the entire course of the disease, every effort should be made to maintain patient autonomy. Advance directives for palliative end-of-life care should be discussed early with the patient and carers, respecting the patient's social and cultural background.

Preserved capillary density of dorsal finger skin in treated hypertensive patients with or without type 2 diabetes

RESUME : La raréfaction des vaisseaux capillaires est une caractéristique de l'hypertension artérielle non traitée. Des données récentes indiquent que cette raréfaction peut être renversée par un traitement antihypertenseur chez les patients hypertendus non diabétiques. Malgré la fréquente association du diabète et de l'hypertension, on ne sait rien de la densité capillaire de patients diabétiques traités, souffrant d'hypertension artérielle. Nous avons dès lors recruté 21 patients normotendus (groupe contrôle), 25 patients souffrant uniquement d'hypertension artérielle , et 21 patients diabétiques (Diabète de type 2) souffrant également d'hypertension artérielle. Tous les patients hypertendus ont été traités avec un inhibiteur du système rénine-angiotensine, et une majorité présentait une tension artérielle moyenne en auto-contrôle à domicile de 135/85 mmHg ou moins. La densité capillaire a été évaluée par vidéomicroscopie sur la peau du dos des doigts et avec laser Doppler sur la peau de l'avant-bras (vasodilatation maximale induite par le chauffage local). Au final, il n'y avait pas de différence entre les groupes de l'étude, que ce soit lors des mesures de la densité capillaire sur le dos du doigt (groupe contrôle 101 ±11 capillaires, groupe des patients non- diabétiques hypertendus 99 ± 16, groupe des patients hypertendus et diabétiques 96 ± 18, p>0,5) ou lors des mesures de débit sanguin maximal sur la peau de l'avant-bras, un témoin indirect de la densité capillaire dans ce territoire (contrôles 666 ±114 unités de perfusion, non diabétique hypertendu 612 ± 126, hypertendus diabétiques 620 ±103, p> 0,5). En conclusion, notre étude est la première à démontrer que indépendamment de la présence ou non d'un diabète de type 2, la densité capillaire est normale chez les patients hypertendus présentant un contrôle raisonnable de la pression artérielle obtenue avec un bloqueur du système rénine-angiotensine.

Fast docking using the CHARMM force field with EADock DSS.

The prediction of binding modes (BMs) occurring between a small molecule and a target protein of biological interest has become of great importance for drug development. The overwhelming diversity of needs leaves room for docking approaches addressing specific problems. Nowadays, the universe of docking software ranges from fast and user friendly programs to algorithmically flexible and accurate approaches. EADock2 is an example of the latter. Its multiobjective scoring function was designed around the CHARMM22 force field and the FACTS solvation model. However, the major drawback of such a software design lies in its computational cost. EADock dihedral space sampling (DSS) is built on the most efficient features of EADock2, namely its hybrid sampling engine and multiobjective scoring function. Its performance is equivalent to that of EADock2 for drug-like ligands, while the CPU time required has been reduced by several orders of magnitude. This huge improvement was achieved through a combination of several innovative features including an automatic bias of the sampling toward putative binding sites, and a very efficient tree-based DSS algorithm. When the top-scoring prediction is considered, 57% of BMs of a test set of 251 complexes were reproduced within 2 Å RMSD to the crystal structure. Up to 70% were reproduced when considering the five top scoring predictions. The success rate is lower in cross-docking assays but remains comparable with that of the latest version of AutoDock that accounts for the protein flexibility. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011.

Measuring cytoskeleton and cellular membrane mechanical properties by atomic force microscopy.

Atomic force microscope is an invaluable device to explore living specimens at a nanometric scale. It permits to image the topography of the sample in 3D, to measure its mechanical properties and to detect the presence of specific molecules bound on its surface. Here we describe the procedure to gather such a data set on living macrophages.

Shoulder sensorimotor control assessment by force platform: feasibility and reliability.

Given the important role of the shoulder sensorimotor system in shoulder stability, its assessment appears of interest. Force platform monitoring of centre of pressure (CoP) in upper-limb weight-bearing positions is of interest as it allows integration of all aspects of shoulder sensorimotor control. This study aimed to determine the feasibility and reliability of shoulder sensorimotor control assessment by force platform. Forty-five healthy subjects performed two sessions of CoP measurement using Win-Posturo(®) Medicapteurs force platform in an upper-limb weight-bearing position with the lower limbs resting on a table to either the anterior superior iliac spines (P1) or upper patellar poles (P2). Four different conditions were tested in each position in random order: eyes open or eyes closed with trunk supported by both hands and eyes open with trunk supported on the dominant or non-dominant side. P1 reliability values were globally moderate to high for CoP length, CoP velocity and CoP standard deviation (SD), standard error of measurement ranged from 6·0% to 26·5%, except for CoP area. P2 reliability values were globally low and not clinically acceptable. Our results suggest that shoulder sensorimotor control assessment by force platform is feasible and has good reliability in upper-limb weight-bearing positions when the lower limbs are resting on a table to the anterior superior iliac spines. CoP length, CoP velocity and CoP SD velocity appear to be the most reliable variables.

Large fluctuations in the disassembly rate of microtubules revealed by atomic force microscopy.

Atomic force microscopy (AFM) in situ has been used to observe the cold disassembly dynamics of microtubules at a previously unrealised spatial resolution. Microtubules either electrostatically or covalently bound to aminosilane surfaces disassembled at room temperature under buffer solutions with no free tubulin present. This process was followed by taking sequential tapping-mode AFM images and measuring the change in the microtubule end position as a function of time, with an spatial accuracy down to +/-20nm and a temporal accuracy of +/-1s. As well as giving average disassembly rates on the order of 1-10 tubulin monomers per second, large fluctuations in the disassembly rate were revealed, indicating that the process is far from smooth and linear under these experimental conditions. The surface bound rates measured here are comparable to the rates for GMPCPP-tubulin microtubules free in solution, suggesting that inhibition of tubulin curvature through steric hindrance controls the average, relatively low disassembly rate. The large fluctuations in this rate are thought to be due to multiple pathways in the kinetics of disassembly with differing rate constants and/or stalling due to defects in the microtubule lattice. Microtubules that were covalently bound to the surface left behind the protofilaments covalently cross-linked to the aminosilane via glutaraldehyde during the disassembly process. Further work is needed to quantitatively assess the effects of surface binding on protofibril disassembly rates, reveal any differences in disassembly rates between the plus and minus ends and to enable assembly as well as disassembly to be imaged in the microscope fluid cell in real-time.

Assessing dystrophies and other muscle diseases at the nanometer scale by atomic force microscopy.

AIM: Atomic force microscopy nanoindentation of myofibers was used to assess and quantitatively diagnose muscular dystrophies from human patients. MATERIALS & METHODS: Myofibers were probed from fresh or frozen muscle biopsies from human dystrophic patients and healthy volunteers, as well as mice models, and Young's modulus stiffness values were determined. RESULTS: Fibers displaying abnormally low mechanical stability were detected in biopsies from patients affected by 11 distinct muscle diseases, and Young's modulus values were commensurate to the severity of the disease. Abnormal myofiber resistance was also observed from consulting patients whose muscle condition could not be detected or unambiguously diagnosed otherwise. DISCUSSION & CONCLUSION: This study provides a proof-of-concept that atomic force microscopy yields a quantitative read-out of human muscle function from clinical biopsies, and that it may thereby complement current muscular dystrophy diagnosis.

Techniques d'évaluation de la force des muscles respiratoires. [Techniques for assessing respiratory muscle strength.]

La faiblesse des muscles respiratoires peut entraîner une dyspnée, un encombrement bronchique et une insuffisance respiratoire potentiellement fatale. L'évaluation de la force musculaire respiratoire s'impose donc dans les affections neuro-musculaires, mais également dans les situations de dyspnée inexpliquée par une première évaluation cardiaque et pulmonaire. À la spirométrie, une faiblesse musculaire est suspectée sur la base de la boucle débit-volume montrant un débit de pointe émoussé et une fin prématurée de l'expiration. Une diminution importante de la capacité vitale en position couchée suggère une paralysie diaphragmatique. La force inspiratoire est mesurée par la pression inspiratoire maximale (PImax) contre une quasi-occlusion des voies aériennes. Ce test relativement difficile est d'interprétation délicate en cas de collaboration insuffisante. La mesure de la pression nasale sniff (SNIP) est une alternative utile, car elle élimine le problème des fuites autour de l'embout buccal et la réalisation du reniflement est facile. De même, la pression trans-diaphragmatique sniff mesure la force du diaphragme au moyen de sondes oesophagienne et gastrique. En cas de collaboration insuffisante, on peut recourir à la stimulation magnétique des nerfs phréniques qui induit une contraction non-volontaire du diaphragme. La force expiratoire est mesurée par la pression expiratoire maximale (PEmax) contre une quasi-occlusion. La force disponible pour tousser est mesurée par la pression gastrique à la toux, ou plus simplement par le débit de pointe à la toux. Chez les patients à risque, la mesure de la force des muscles respiratoires permet d'instaurer à temps une assistance ventilatoire ou à la toux.

Intracellular nanomanipulation by a photonic-force microscope with real-time acquisition of a 3D stiffness matrix.

A traditional photonic-force microscope (PFM) results in huge sets of data, which requires tedious numerical analysis. In this paper, we propose instead an analog signal processor to attain real-time capabilities while retaining the richness of the traditional PFM data. Our system is devoted to intracellular measurements and is fully interactive through the use of a haptic joystick. Using our specialized analog hardware along with a dedicated algorithm, we can extract the full 3D stiffness matrix of the optical trap in real time, including the off-diagonal cross-terms. Our system is also capable of simultaneously recording data for subsequent offline analysis. This allows us to check that a good correlation exists between the classical analysis of stiffness and our real-time measurements. We monitor the PFM beads using an optical microscope. The force-feedback mechanism of the haptic joystick helps us in interactively guiding the bead inside living cells and collecting information from its (possibly anisotropic) environment. The instantaneous stiffness measurements are also displayed in real time on a graphical user interface. The whole system has been built and is operational; here we present early results that confirm the consistency of the real-time measurements with offline computations.

Tightening force and torque of nonlocking screws in a reverse shoulder prosthesis.

BACKGROUND: Reversed shoulder arthroplasty is an accepted treatment for glenohumeral arthritis associated to rotator cuff deficiency. For most reversed shoulder prostheses, the baseplate of the glenoid component is uncemented and its primary stability is provided by a central peg and peripheral screws. Because of the importance of the primary stability for a good osteo-integration of the baseplate, the optimal fixation of the screws is crucial. In particular, the amplitude of the tightening force of the nonlocking screws is clearly associated to this stability. Since this force is unknown, it is currently not accounted for in experimental or numerical analyses. Thus, the primary goal of this work is to measure this tightening force experimentally. In addition, the tightening torque was also measured, to estimate an optimal surgical value. METHODS: An experimental setup with an instrumented baseplate was developed to measure simultaneously the tightening force, tightening torque and screwing angle, of the nonlocking screws of the Aquealis reversed prosthesis. In addition, the amount of bone volume around each screw was measured with a micro-CT. Measurements were performed on 6 human cadaveric scapulae. FINDINGS: A statistically correlated relationship (p<0.05, R=0.83) was obtained between the maximal tightening force and the bone volume. The relationship between the tightening torque and the bone volume was not statistically significant. INTERPRETATION: The experimental relationship presented in this paper can be used in numerical analyses to improve the baseplate fixation in the glenoid bone.

FRAX® International Task Force of the 2010 Joint International Society for Clinical Densitometry & International Osteoporosis Foundation Position Development Conference.

Osteoporosis is a serious worldwide epidemic. FRAX® is a web-based tool developed by the Sheffield WHO Collaborating Center team, that integrates clinical risk factors and femoral neck BMD and calculates the 10 year fracture probability in order to help health care professionals identify patients who need treatment. However, only 31 countries have a FRAX® calculator. In the absence of a FRAX® model for a particular country, it has been suggested to use a surrogate country for which the epidemiology of osteoporosis most closely approximates the index country. More specific recommendations for clinicians in these countries are not available. In North America, concerns have also been raised regarding the assumptions used to construct the US ethnic specific FRAX® calculators with respect to the correction factors applied to derive fracture probabilities in Blacks, Asians and Hispanics in comparison to Whites. In addition, questions were raised about calculating fracture risk in other ethnic groups e.g., Native Americans and First Canadians. The International Society for Clinical Densitometry (ISCD) in conjunction with the International Osteoporosis Foundation (IOF) assembled an international panel of experts that ultimately developed joint Official Positions of the ISCD and IOF advising clinicians regarding FRAX® usage. As part of the process, the charge of the FRAX® International Task Force was to review and synthesize data regarding geographic and race/ethnic variability in hip fractures, non-hip osteoporotic fractures, and make recommendations about the use of FRAX® in ethnic groups and countries without a FRAX® calculator. This synthesis was presented to the expert panel and constitutes the data on which the subsequent Official Positions are predicated. A summary of the International Task Force composition and charge is presented here.

Myostatin augments muscle-specific ring finger protein-1 expression through an NF-kB independent mechanism in SMAD3 null muscle.

Smad (Sma and Mad-related protein) 2/3 are downstream signaling molecules for TGF-β and myostatin (Mstn). Recently, Mstn was shown to induce reactive oxygen species (ROS) in skeletal muscle via canonical Smad3, nuclear factor-κB, and TNF-α pathway. However, mice lacking Smad3 display skeletal muscle atrophy due to increased Mstn levels. Hence, our aims were first to investigate whether Mstn induced muscle atrophy in Smad3(-/-) mice by increasing ROS and second to delineate Smad3-independent signaling mechanism for Mstn-induced ROS. Herein we show that Smad3(-/-) mice have increased ROS levels in skeletal muscle, and inactivation of Mstn in these mice partially ablates the oxidative stress. Furthermore, ROS induction by Mstn in Smad3(-/-) muscle was not via nuclear factor-κB (p65) signaling but due to activated p38, ERK MAPK signaling and enhanced IL-6 levels. Consequently, TNF-α, nicotinamide adenine dinucleotide phosphate oxidase, and xanthine oxidase levels were up-regulated, which led to an increase in ROS production in Smad3(-/-) skeletal muscle. The exaggerated ROS in the Smad3(-/-) muscle potentiated binding of C/EBP homology protein transcription factor to MuRF1 promoter, resulting in enhanced MuRF1 levels leading to muscle atrophy.

GENETIC AND BIOCHEMICAL ANALYSIS OF THE TESTIS-SPECIFIC ZINC FINGER PROTEIN CTCFL/BORIS

Abstract en FrançaisCTCFL a d'abord été identifié comme un paralogue de la protéine ubiquitaire CTCF en raison de sa forte homologie entre leurs onze « zinc fingers », un domaine de liaison à l'ADN. Parmi ses nombreux rôles, la liaison des zinc fingers de CTCF à la région de contrôle de l'empreinte (ICR) maternelle non-méthylée Igf2/H19, contrôle l'expression empreinte (monoallélique) de H19 et IGF2 dans les cellules somatiques. La méthylation de l'ICR Igf2/H19 paternelle est nécessaire à l'expression empreinte de ces deux gènes. Bien que le mécanisme par lequel l'ICR est méthylé soit mal compris, il est connu que l'établissement de la méthylation se produit pendant le développement des cellules germinales mâles et que les ADN méthyltransférases de novo DNMT3A et DNMT3L sont essentiels. Par conséquent, CTCFL fournit un bon candidat pour un rôle dans la méthylation de l'ICR paternelle Igf2/H19 en raison de son expression restreinte à certains types de cellules où la méthylation de l'ICR a lieu (spermatogonies et spermatocytes) ainsi qu'en raison sa capacité à lier les ICR lgf2/HÎ9 dans ces cellules. Les premiers travaux expérimentaux de cette thèse portent sur le rôle possible des mutations de CTCFL chez les patients atteints du syndrome de Silver-Russell (SRS), où une diminution de la méthylation de l'ICR IGF2/H19 a été observée chez 60% d'entre eux. Admettant que CTCFL pourrait être muté chez ces patients, j'ai examiné les mutations possibles de CTCFL chez 35 d'entre eux par séquençage de l'ADN et analyse du nombre de copies d'exons. N'ayant trouvé aucune mutation chez ces patients, cela suggère que les mutations de CTCFL ne sont pas associées au SRS. Les travaux expérimentaux suivants ont porté sur les modifications post-traductionnelles de CTCFL par la protéine SU MO « small ubiquitin-like modifier » (SUMO). La modification de protéines par SU MO change les interactions avec d'autres molécules (ADN ou protéines). Comme CTCFL régule sans doute l'expression d'un certain nombre de gènes dans le cancer et que plusieurs facteurs de transcription sont régulés par SUMO, j'ai mené des expériences pour déterminer si CTCFL est sumoylé. En effet, j'ai observé que CTCFL est sumoylated in vitro et in vivo et j'ai déterminé les deux résidus d'attachement de SUMO aux lysines 181 et 645. Utilisant les mutants de CTCFL K181R et K645R ne pouvant pas être sumoylated, j'ai évalué les conséquences fonctionnelles de la modification par SUMO. Je n'ai trouvé aucun changement significatif dans la localisation subcellulaire, la demi-vie ou la liaison à l'ADN, mais ai constaté que la sumoylation module à la fois {'activation CTCFL-dépendante et la répression de l'expression génique. Il s'agit de la première modification post-traductionnelle décrite pour CTCFL et les conséquences possibles de cette modification sont discutées pour le cancer et les testicules normaux. Avec cette thèse, j'espère avoir ajouté des résultats importants à l'étude de CTCFL et donné quelques idées pour de futures recherches.AbstractJeremiah Bernier-Latmani, Institute of Pathology, University of Lausanne, CHUVCTCFL was first identified as a paralog of the ubiquitous protein CTCF because of high homology between their respective eleven zinc fingers, a DNA binding domain. Among its many roles, CTCF zinc finger-mediated binding to the unmethylated maternal Igf2/H19 imprinting control region (ICR), controls the imprinted (monoallelic) expression of Igf2 and H19 in somatic cells. Methylation of the paternal Igf2/H19 ICR is necessary for the imprinted expression of the two genes. Although the mechanism by which the ICR is methylated is incompletely understood, it is known that establishment of methylation occurs during male germ cell development and the de novo DNA methyltransferases DNMT3A and DNMT3L are essential. Therefore, CTCFL provided a good candidate to play a role in methylation of the paternal Igf2/H19 ICR because of its restricted expression to cell types where ICR methylation takes place (spermatogonia and spermatocytes) and its ability to bind the Igf2/H19 ICR in these cells. The first experimental work of this thesis investigated the possible role of CTCFL mutations in Silver-Russell syndrome (SRS) patients, where it has been observed that 60% of the patients have reduced methylation of the IGF2/HÎ9 ICR. Reasoning that CTCFL could be mutated in these patients, I screened 35 patients for mutations in CTCFL by DNA sequencing and exon copy number analysis, I did not find any mutations in these patients suggesting that mutations of CTCFL are not associated with SRS. The next experimental work of my thesis focused on posttranslational modification of CTCFL by small ubiquitin-like modifier (SUMO) protein. SUMO modification of proteins changes the interactions with other molecules (DNA or protein). As CTCFL arguably regulates the expression of a number of genes in cancer and many transcription factors are regulated by SUMO, I conducted experiments to assess whether CTCFL is sumoylated. I found that CTCFL is sumoylated in vitro and in vivo and determined the two residues of SUMO attachment to be lysines 181 and 645. Using K181R, K645R mutated CTCFL- which cannot be detected to be sumoylated-1 assessed the functional consequences of SUMO modification. I found no significant changes in subcellular localization, half-life or DNA binding, but found that sumoylation modulates both CTCFL-dependent activation and repression of gene expression. This is the first posttranslational modification described for CTCFL and possible consequences of this modification are discussed in both cancer and normal testis. With this thesis, I hope I have added important findings to the study of CTCFL and provide some ideas for future research.