Micro-insurance through corporate-NGO partnerships in West Bengal : opportunities and constraints

This Practical Note examines the nascent micro-insurance sector in West Bengal, paying particular attention to the corporate- NGO partnership model for micro-insurance distribution,which has been enabled by India's unique regulatory framework. We challenge the popularconstruction of this model as a 'win - win' for all parties by analysing conflicting understandings of micro-insurance schemes and their purposes by insurance companies, NGOs, and poorvillagers. The article also considers the role of the specific political context of West Bengal inconstricting corporate- NGO micro-insurance

The influence of supplementary health insurance on switching behaviour: evidence from Swiss data.

This paper focuses on the switching behaviour of enrolees in the Swiss basic health insurance system. Even though the new Federal Law on Social Health Insurance (LAMal) was implemented in 1996 to promote competition among health insurers in basic insurance, there is limited evidence of premium convergence within cantons. This indicates that competition has not been effective so far, and reveals some inertia among consumers who seem reluctant to switch to less expensive funds. We investigate one possible barrier to switching behaviour, namely the influence of supplementary insurance. We use survey data on health plan choice (a sample of 1943 individuals whose switching behaviours were observed between 1997 and 2000) as well as administrative data relative to all insurance companies that operated in the 26 Swiss cantons between 1996 and 2005. The decision to switch and the decision to subscribe to a supplementary contract are jointly estimated.Our findings show that holding a supplementary insurance contract substantially decreases the propensity to switch. However, there is no negative impact of supplementary insurance on switching when the individual assesses his/her health as 'very good'. Our results give empirical support to one possible mechanism through which supplementary insurance might influence switching decisions: given that subscribing to basic and supplementary contracts with two different insurers may induce some administrative costs for the subscriber, holding supplementary insurance acts as a barrier to switch if customers who consider themselves 'bad risks' also believe that insurers reject applications for supplementary insurance on these grounds. In comparison with previous research, our main contribution is to offer a possible explanation for consumer inertia. Our analysis illustrates how consumer choice for one's basic health plan interacts with the decision to subscribe to supplementary insurance.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Self-selection and risk selection on the Swiss health insurance market

Abstract This thesis presents three empirical studies in the field of health insurance in Switzerland. First we investigate the link between health insurance coverage and health care expenditures. We use claims data for over 60 000 adult individuals covered by a major Swiss Health Insurance Fund, followed for four years; the data show a strong positive correlation between coverage and expenditures. Two methods are developed and estimated in order to separate selection effects (due to individual choice of coverage) and incentive effects ("ex post moral hazard"). The first method uses the comparison between inpatient and outpatient expenditures to identify both effects and we conclude that both selection and incentive effects are significantly present in our data. The second method is based on a structural model of joint demand of health care and health insurance and makes the most of the change in the marginal cost of health care to identify selection and incentive effects. We conclude that the correlation between insurance coverage and health care expenditures may be decomposed into the two effects: 75% may be attributed to selection, and 25 % to incentive effects. Moreover, we estimate that a decrease in the coinsurance rate from 100% to 10% increases the marginal demand for health care by about 90% and from 100% to 0% by about 150%. Secondly, having shown that selection and incentive effects exist in the Swiss health insurance market, we present the consequence of this result in the context of risk adjustment. We show that if individuals choose their insurance coverage in function of their health status (selection effect), the optimal compensations should be function of the se- lection and incentive effects. Therefore, a risk adjustment mechanism which ignores these effects, as it is the case presently in Switzerland, will miss his main goal to eliminate incentives for sickness funds to select risks. Using a simplified model, we show that the optimal compensations have to take into account the distribution of risks through the insurance plans in case of self-selection in order to avoid incentives to select risks.Then, we apply our propositions to Swiss data and propose a simple econometric procedure to control for self-selection in the estimation of the risk adjustment formula in order to compute the optimal compensations.

Employment risk, unemployment insurance and search strategies: a disaggregated equilibrium approach with application to the Swiss labour market in the 1990-ies

The Organization of the Thesis The remainder of the thesis comprises five chapters and a conclusion. The next chapter formalizes the envisioned theory into a tractable model. Section 2.2 presents a formal description of the model economy: the individual heterogeneity, the individual objective, the UI setting, the population dynamics and the equilibrium. The welfare and efficiency criteria for qualifying various equilibrium outcomes are proposed in section 2.3. The fourth section shows how the model-generated information can be computed. Chapter 3 transposes the model from chapter 2 in conditions that enable its use in the analysis of individual labor market strategies and their implications for the labor market equilibrium. In section 3.2 the Swiss labor market data sets, stylized facts, and the UI system are presented. The third section outlines and motivates the parameterization method. In section 3.4 the model's replication ability is evaluated and some aspects of the parameter choice are discussed. Numerical solution issues can be found in the appendix. Chapter 4 examines the determinants of search-strategic behavior in the model economy and its implications for the labor market aggregates. In section 4.2, the unemployment duration distribution is examined and related to search strategies. Section 4.3 shows how the search- strategic behavior is influenced by the UI eligibility and section 4.4 how it is determined by individual heterogeneity. The composition effects generated by search strategies in labor market aggregates are examined in section 4.5. The last section evaluates the model's replication of empirical unemployment escape frequencies reported in Sheldon [67]. Chapter 5 applies the model economy to examine the effects on the labor market equilibrium of shocks to the labor market risk structure, to the deep underlying labor market structure and to the UI setting. Section 5.2 examines the effects of the labor market risk structure on the labor market equilibrium and the labor market strategic behavior. The effects of alterations in the labor market deep economic structural parameters, i.e. individual preferences and production technology, are shown in Section 5.3. Finally, the UI setting impacts on the labor market are studied in Section 5.4. This section also evaluates the role of the UI authority monitoring and the differences in the Way changes in the replacement rate and the UI benefit duration affect the labor market. In chapter 6 the model economy is applied in counterfactual experiments to assess several aspects of the Swiss labor market movements in the nineties. Section 6.2 examines the two equilibria characterizing the Swiss labor market in the nineties, the " growth" equilibrium with a "moderate" UI regime and the "recession" equilibrium with a more "generous" UI. Section 6.3 evaluates the isolated effects of the structural shocks, while the isolated effects of the UI reforms are analyzed in section 6.4. Particular dimensions of the UI reforms, the duration, replacement rate and the tax rate effects, are studied in section 6.5, while labor market equilibria without benefits are evaluated in section 6.6. In section 6.7 the structural and institutional interactions that may act as unemployment amplifiers are discussed in view of the obtained results. A welfare analysis based on individual welfare in different structural and UI settings is presented in the eighth section. Finally, the results are related to more favorable unemployment trends after 1997. The conclusion evaluates the features embodied in the model economy with respect to the resulting model dynamics to derive lessons from the model design." The thesis ends by proposing guidelines for future improvements of the model and directions for further research.

The influence of bacterial activity on phosphorite formation in the Miocene Monterey Formation, California

Authigenic phosphorites from the Miocene Monterey Formation (California) including an autochthonous phosphatic laminite were analyzed for molecular biomarkers, element content, and sulfur isotopic composition of associated pyrite and sulfate to evaluate the role of bacterial activity in the precipitation of phosphate minerals. The phosphorites formed in a depositional environment typified by upwelling with dynamic bottom currents and hardground formation. Pyrite enclosed in the phosphorites shows delta S-34 values as low as -36.5 parts per thousand VCDT, which is consistent with bacterial sulfate reduction. In a three-step extraction phosphorite dissolution extraction procedure, molecular fossils of sulfate-reducing bacteria (di-O-alkyl glycerol ethers and short-chain branched fatty acids i- and ai-C-15:0, i- and ai-C-17:0, and 10MeC(16:0)) were preferentially released from the mineral lattice. This suggests that the molecular fossils were tightly bound to carbonate fluorapatite, indicating that sulfate-reducing bacteria were involved in mineral formation. A close association of sulfate-reducing bacteria with large sulfide-oxidizing bacteria, which was previously suggested to favor carbonate fluorapatite precipitation, could neither be confirmed nor excluded for the Miocene Monterey Formation phosphorites. (C) 2012 Elsevier B.V. All rights reserved.

The Demand for Social Insurance: Does Culture Matter?

Does culture shape the demand for social insurance against risks to health and work? We study this issue across language groups in Switzerland where a language border sharply separates social groups at identical actual levels of publicly provided social insurance. We find substantially stronger support for expansions of social insurance among residents of French, Italian or Romansh-speaking language border municipalities compared with their German-speaking neighbours in adjacent municipalities. Informal insurance does not vary enough to explain stark differences in social insurance but differences in ideology and segmented media markets potentially contribute to the discrepancy in demand for social insurance.