45 resultados para [JEL:C22] Mathematical and Quantitative Methods - Econometric Methods: Single Equation Models
Resumo:
This article describes the composition of fingermark residue as being a complex system with numerous compounds coming from different sources and evolving over time from the initial composition (corresponding to the composition right after deposition) to the aged composition (corresponding to the evolution of the initial composition over time). This complex system will additionally vary due to effects of numerous influence factors grouped in five different classes: the donor characteristics, the deposition conditions, the substrate nature, the environmental conditions and the applied enhancement techniques. The initial and aged compositions as well as the influence factors are thus considered in this article to provide a qualitative and quantitative review of all compounds identified in fingermark residue up to now. The analytical techniques used to obtain these data are also enumerated. This review highlights the fact that despite the numerous analytical processes that have already been proposed and tested to elucidate fingermark composition, advanced knowledge is still missing. Thus, there is a real need to conduct future research on the composition of fingermark residue, focusing particularly on quantitative measurements, aging kinetics and effects of influence factors. The results of future research are particularly important for advances in fingermark enhancement and dating technique developments.
Resumo:
Various compositions of synthetic calcium phosphates (CaP) have been proposed and their use has considerably increased over the past decades. Besides differences in physico-chemical properties, resorption and osseointegration, artificial CaP bone graft might differ in their resistance against biofilm formation. We investigated standardised cylinders of 5 different CaP bone grafts (cyclOS, chronOS (both β-TCP (tricalcium phosphate)), dicalcium phosphate (DCP), calcium-deficient hydroxyapatite (CDHA) and α-TCP). Various physico-chemical characterisations e.g., geometrical density, porosity, and specific surface area were investigated. Biofilm formation was carried out in tryptic soy broth (TSB) and human serum (SE) using Staphylococcus aureus (ATCC 29213) and S. epidermidis RP62A (ATCC 35984). The amount of biofilm was analysed by an established protocol using sonication and microcalorimetry. Physico-chemical characterisation showed marked differences concerning macro- and micropore size, specific surface area and porosity accessible to bacteria between the 5 scaffolds. Biofilm formation was found on all scaffolds and was comparable for α-TCP, chronOS, CDHA and DCP at corresponding time points when the scaffolds were incubated with the same germ and/or growth media, but much lower for cyclOS. This is peculiar because cyclOS had an intermediate porosity, mean pore size, specific surface area, and porosity accessible to bacteria. Our results suggest that biofilm formation is not influenced by a single physico-chemical parameter alone but is a multi-step process influenced by several factors in parallel. Transfer from in vitro data to clinical situations is difficult; thus, advocating the use of cyclOS scaffolds over the four other CaP bone grafts in clinical situations with a high risk of infection cannot be clearly supported based on our data.
Resumo:
Functionally relevant large scale brain dynamics operates within the framework imposed by anatomical connectivity and time delays due to finite transmission speeds. To gain insight on the reliability and comparability of large scale brain network simulations, we investigate the effects of variations in the anatomical connectivity. Two different sets of detailed global connectivity structures are explored, the first extracted from the CoCoMac database and rescaled to the spatial extent of the human brain, the second derived from white-matter tractography applied to diffusion spectrum imaging (DSI) for a human subject. We use the combination of graph theoretical measures of the connection matrices and numerical simulations to explicate the importance of both connectivity strength and delays in shaping dynamic behaviour. Our results demonstrate that the brain dynamics derived from the CoCoMac database are more complex and biologically more realistic than the one based on the DSI database. We propose that the reason for this difference is the absence of directed weights in the DSI connectivity matrix.
Resumo:
Applications of genetic constructs with multiple promoters, which are fused with reporter genes and simultaneous monitoring of various events in cells, have gained special attention in recent years. Lentiviral vectors, with their distinctive characteristics, have been considered to monitor the developmental changes of cells in vitro. In this study, we constructed a novel lentiviral vector (FUM-M), containing two germ cell-specific promoters (Stra8 and c-kit), fused with ZsGreen and DsRed2 reporter genes, and evaluated its efficiency in different cells following treatments with retinoic acid and DMSO. Several cell lines (P19, GC-1 spg and HEK293T) were transduced with this vector, and functional capabilities of the promoters were verified by flow cytometry and quantitative RT-PCR. Our results indicate that FUM-M shows dynamic behavior in the presence and absence of extrinsic factors. A correlation was also observed between the function of promoters, present in the lentiviral construct and the endogenous level of the Stra8 and c-kit mRNAs in the cells. In conclusion, we recommend this strategy, which needs further optimization of the constructs, as a beneficial and practical way to screen chemical inducers involved in cellular differentiation toward germ-like cells.
Resumo:
Résumé Les rongeurs utilisent leurs moustaches (vibrisses) pour explorer le milieu environnant. Chaque moustache est mue par un système des muscles. Les récepteurs situés à sa base transmettent les informations au système nerveux central. La transmission vers l'écorce se fait via trois neurones de relais qui se trouvent au niveau du ganglion trigéminé, du tronc cérébral et du thalamus. La représentation corticale d'une vibrisse est une concentration des axones thalamo-corticaux (ATC) autour desquelles s'organisent leurs cibles, les cellules de la couche IV. La structure peut être identifiée histologiquement en coupes tangentielles et porte le nom de « barrel » (« tonneau »). Cette correspondance vibrisse - barrel fait de ce système un model idéal pour étudier l'influence de l'activité périphérique sur l'établissement et le maintien des cartes somatotopiques. Notre laboratoire dispose d'une souche de souris qui a subi une mutation spontanée pour le gène codant l'adenylyl cyclase I (ACI). Cette enzyme membranaire catalyse la formation de l'AMPc et joue un rôle important dans le guidage axonal, la libération des neurotransmetteurs et l'intégration des signaux postsynaptiques. Nous avons démontré dans un premier temps que cette souris adulte ne développe pas de barrels. Cela est dû à un manque d'organisation des ATC et aussi des cellules de la couche IV. De plus, les résultats électrophysiologiques montrent que les informations venant des vibrisses adjacentes ne sont pas intégrées d'une manière normale. Dans ce travail de thèse, j'ai analysé la morphologie des ATC révélés individuellement avec de la biocytine. L'analyse quantitative des ATC a mis en évidence les points suivants: 1. Les axones de la souris normale (NOR) quittent le thalamus, traversent la capsule interne et la substance blanche sous-corticale et pénètrent dans le cortex somato-sensoriel primaire. A l'intérieur de l'écorce ils traversent au maximum 3 colonnes corticales adjacentes dont une contient le barrel cible. En passant à travers les couches VI et V, ces axones arborisent et convergent progressivement vers le barrel dans lequel ils forment une riche arborisation. Un petit nombre des branches « errantes », pleines de boutons synaptiques, pénètrent dans les barrels voisins. Deux axones NOR provenant de corps cellulaires très proches dans le thalamus peuvent avoir un cheminement très divergent lors de la traversée de la capsule interne et de la substance blanche sous-corticale mais, à leur entrée dans le cortex, ils sont distants d'au maximum 2 colonnes corticales de la colonne qui contient le barrel cible et ils convergent progressivement vers ce barrel. 2. Les axones de la souris mutante (BRL) ont le même trajet sous-cortical que les axones NOR, mais leur entrée dans le cortex somato-sensoriel primaire est aléatoire. A l'interface entre la substance blanche sous-corticale et le cortex, l'axone principal se divise rapidement en troncs axonaux qui traversent les couches VI et V d'une manière divergente pour arriver dans la couche IV. Cela contraste beaucoup avec la trajectoire des NOR qui convergent graduellement vers leur barrel cible. Le nombre de branches radiales que les axones BRL utilisent pour entrer dans le cortex et dans la couche IV est double par rapport aux axones NOR. Parmi ces branches, seules quelques-unes donnent des arborisations, les autres ne sont pas développées et leur morphologie est semblable à celle des branches formées par les axones de la souris normale lors du développement. Deux axones BRL issus de corps cellulaires proches dans le thalamus peuvent avoir une trajectoire très divergente jusqu'à leur entrée dans la couche IV, mais à ce niveau ils sont réorientés pour se retrouver et faire un nombre maximal de branches et boutons synaptiques dans la même région corticale. Dans un cas extrême, un des axones observés est entré dans le cortex à la limite entre l'aire somatosensorielle primaire et secondaire et a parcouru une distance de 2 mm pour retrouver son partenaire thalamique et donner avec celui-ci un nombre maximal de branches dans la même région de la couche IV. 3. Les mesures quantitatives ont montré que les arborisations corticales des axones NOR ont une longueur moyenne de 18mm et sont formées par 200 segments qui portent 1200 boutons synaptiques. Par rapport à la souris NOR, les axones BRL ont en moyenne la même longueur, le même nombre de segments et boutons synaptiques, mais donnent deux fois plus de branches radiales. La surface tangentielle occupée par les arborisations BRL dans la couche IV est 2 fois plus grande que celle des NOR. Cela signifie que les 1000 boutons synaptiques qui caractérisent les arborisations NOR et BRL dans la couche IV sont disséminés sur une surface tangentielle double chez les derniers, et donc que la densité des boutons par unité de surface corticale est en moyenne plus faible. En effet, l'augmentation de la surface corticale tangentielle des BRL est due aux surfaces de faible et moyenne densité synaptique (0 - 8 boutons / 400pn2) qui augmentent 2 fois tandis que les surfaces de haute densité synaptiques (8 - 64 boutons / 4001.tm2) sont les mêmes. Nous émettons l'hypothèse selon laquelle, durant le développement, les ATC de la souris BRL divergent et forment un nombre exubérant de branches. Grâce à cette divergence et aux branches supranuméraires, ils trouvent l'endroit de l'écorce où se trouvent leurs voisins thalamiques et arborisent abondamment dans cette région. Cependant, le déficit en AGI ne leurs permet pas par la suite, sous influence de l'activité périphérique, de retirer les branches qui se trouvent dans les endroits inappropriés de l'écorce, avec de possibles conséquences sur la discrimination tactile.
Resumo:
Résumé: Valoriser le géopatrimoine par la médiation indirecte et la visualisation des objets géomorphologiques Le géopatrimoine regroupe des objets géologiques lato sensu auxquels certaines valeurs sont attribuées, en fonction de leur intérêt pour la science, de leur rareté, de leurs particularités culturelles ou écologiques, etc. Valoriser le géopatrimoine signifie avant tout faire partager cette approche aux non-spécialistes, en expliquant ce qui fait la valeur de ces objets. Cette valorisation peut s'effectuer, entre autres, sous la forme d'une activité touristique et contribuer ainsi au développement régional. Faire comprendre l'origine, la singularité et la valeur des formes du relief implique le recours à une communication éducative, désignée par le terme de médiation. Les implications de la dimension éducative du processus, comme la prise en compte des connaissances et attentes du public, la création d'un environnement favorable à l'apprentissage ou l'attractivité du contenu, sont souvent négligées. Du point de vue conceptuel, un modèle de la médiation indirecte (c'est-à-dire au moyen de supports médiatiques) a été proposé et appliqué au développement empirique de produits de médiation et à leur évaluation. Ce modèle ne garantit pas la réussite de la communication éducative, mais contribue à créer un cadre favorable au processus. De plus, plusieurs lignes directrices pour le choix du type de média et sa mise en forme ont été définies sur la base d'une compilation de résultats de la psychologie cognitive sur l'usage des médias pour l'apprentissage. Des méthodes qualitatives et quantitatives variées ont été mobilisées : enquêtes par questionnaire ex situ et in situ, auprès des visiteurs de géomorphosites de montagne, réalisation de médias interactifs testés ensuite auprès de divers publics (parcours enregistré, pré- et post-questionnaires) et entretiens collectifs. Les résultats obtenus éclairent divers aspects de la problématique. L'étude du public a montré, par exemple, que le géotourisme possède un réel public parmi les visiteurs des sites de montagnes : trois-quarts d'entre eux expriment de l'intérêt pour des explications sur la géologie et l'évolution du paysage. Cette thèse a exploré ces aspects liés au processus d'apprentissage en se focalisant sur les médias visuels, surtout interactifs. La plupart des médias visuels couramment utilisés en géomorphologie ont été considérés. Le développement de versions interactives de ces médias sous forme d'applications web a fourni un aperçu concret des possibilités des nouvelles technologies. Les utilisateurs apprécient en particulier a richesse du contenu, le haut degré d'interactivité et la variété de ces applications. De tels médias incitent à visiter le site naturel et semblent aussi répondre aux intérêts de publics variés. Abstract: Geoheritage promotion through non-personal interpretation and visualisation of geomorphological features Geoheritage concerns all geological features lato sensu to which some values are attributed, according to their scientific interest, their rarity, their cultural or ecological dimensions, etc. Geoheritage promotion implies sharing this point of view with non-specialists, explaining what gives value to those objects. Geotourism is one of the many ways to achieve geoheritage promotion, while contributing also to regional development. In order to make non-specialists understand the origin, the specificity and the value of landforms, educational communication is needed, that is called interpretation (French: médiation). This education dimension has several, and often neglected, implications, like taking into account public's knowledge and expectations, creating a favourable learning environment, attractive design, etc. From the conceptual point of view, a model for non-personal interpretation has been proposed and applied for the empirical development and for the assessment of interpretive products. This model does not guarantee success of educational communication, but help creating a favourable environment for this process. Moreover, some guidelines were defined from a compilation of several results of cognitive psychology on media use for learning. They guide the choice of the kind of media and its design. Several qualitative and quantitative methods were applied: survey questionnaires ex situ and in situ by mountain geomorphosites visitors, interactive medias developed and then tested by different kinds of users (with usertracking, pre- and post-survey questionnaires), group interviews. The results answered different aspects of the research questions. Visitor surveys revealed for example that geotourism could attract many visitors of mountain areas: three quarters of them say they are interested in getting explanations about geology and landscape (in particular its dynamic dimensions). This thesis examined those aspects with a focus on visual medias, both statics and interactive. Most of currently used medias in geomorphology were considered. Interactive versions of those medias were developed in web applications; they gave a concrete overview on the opportunities that new technologies offer. The content richness, the high interaction level and the diversity of the applications are the most liked aspects by the users. Such medias drive to visit the natural site and seem to correspond to the interests of various kinds of publics. Zusammenfassung: Aufwertung des erdwissenschaftlichen Erbes durch mediale Vermittlung und Visualisierung von geomorphologischen Objekten Das erdwissenschaftliche Erbe besteht aus geologischen Gegebenheiten lato sensu, denen entsprechend ihrer Bedeutung für die Wissenschaft, ihrer Seltenheit, ihrer kulturellen oder ökologischen Besonderheiten usw. bestimmte Werte zugeordnet werden. Das erdwissenschaftliche Erbe aufzuwerten bedeutet in erster Linie, diesen Ansatz Nichtspezialisten näher zu bringen, indem ihnen erklärt wird, was den Wert dieser Gegebenheiten ausmacht. Dies kann etwa im Rahmen eines touristischen Angebots geschehen und so die regionale Entwicklung unterstützen. Um Entstehung, Besonderheit und Wert von Geländeformen verständlich zu machen, wird eine pädagogische Kommunikationsform verwendet, die als mediale Vermittlung (franz. médiation) bezeichnet wird. Die Bedeutung der pädagogischen Dimension des Vermittlungsprozesses wie etwa der Einbezug des Wissens und der Erwartungen des Publikums, die Gestaltung eines positiven Lernklimas oder die Attraktivität des Inhalts wird oft vernachlässigt. Auf konzeptueller Ebene wurde ein Modell der indirekten Interpretation erarbeitet (d. h. anhand von Medien), das bei der empirischen Entwicklung der Interpretationsprodukte und ihrer Evaluation Anwendung fand. Dieses Modell garantiert zwar nicht den Erfolg der pädagogischen Kommunikation. Es trägt aber dazu bei, einen für den Prozess günstigen Kontext zu schaffen. Des Weiteren wurden mehrere Richtlinien für die Wahl des Medientyps und dessen Ausgestaltung anhand einer Zusammenstellung von Resultaten der kognitiven Psychologie über den Gebrauch von Medien in Lernprozessen definiert. Es wurden verschiedene qualitative und quantitative Methoden eingesetzt: Befragung mittels Fragebogen der Besucher von geomorphologischen Geotopen im Gebirge - ex situ und in situ -, Erarbeitung von interaktiven Medien, die anschliessend anhand verschiedener Zielgruppen gestestet wurden (Aufnahme des Besuchparcours, Vor- und Nachfragebögen) sowie kollektive Interviews. Die Ergebnisse geben Aufschluss zu verschiedenen Aspekten der Fragestellung. Die Befragung des Publikums hat zum Beispiel deutlich gemacht, dass der Geotourismus unter den Besuchern von Berggebieten tatsächlich auf eine Nachfrage stösst: drei Viertel von ihnen zeigen ein Interesse für Erläuterungen zur Geologie und der Landschaftsentwicklung. Die vorliegende Doktorarbeit hat die genannten Aspekte der Lernprozesse untersucht, wobei der Fokus auf visuellen, insbesondere interaktiven Medien lag. Die meisten gängigen visuellen Medien der Geomorphologie wurden berücksichtigt. Die Entwicklung von interaktiven Versionen dieser Medien in Form von Web-Anwendungen hat die Möglichkeiten der neuen Technologien veranschaulicht. Die Benutzer schätzten insbesondere die Vielfalt des Inhalts, die hohe Interaktivität und die Diversität dieser Anwendungen. Solche Medien laden dazu ein, ein Naturgebiet zu besuchen und scheinen den Interessen der verschiedenen Publikumsgruppen entgegenzukommen.
Resumo:
Correlative fluorescence and electron microscopy has become an indispensible tool for research in cell biology. The integrated Laser and Electron Microscope (iLEM) combines a Fluorescence Microscope (FM) and a Transmission Electron Microscope (TEM) within one set-up. This unique imaging tool allows for rapid identification of a region of interest with the FM, and subsequent high resolution TEM imaging of this area. Sample preparation is one of the major challenges in correlative microscopy of a single specimen; it needs to be apt for both FM and TEM imaging. For iLEM, the performance of the fluorescent probe should not be impaired by the vacuum of the TEM. In this technical note, we have compared the fluorescence intensity of six fluorescent probes in a dry, oxygen free environment relative to their performance in water. We demonstrate that the intensity of some fluorophores is strongly influenced by its surroundings, which should be taken into account in the design of the experiment. Furthermore, a freeze-substitution and Lowicryl resin embedding protocol is described that yields excellent membrane contrast in the TEM but prevents quenching of the fluorescent immuno-labeling. The embedding protocol results in a single specimen preparation procedure that performs well in both FM and TEM. Such procedures are not only essential for the iLEM, but also of great value to other correlative microscopy approaches.
Resumo:
The integration of information which can be gained from accessory [i.e. age (t)] and rock-forming minerals [i.e. temperature (T) and pressure (P)] requires a more profound understanding of the equilibration kinetics during metamorphic processes. This paper presents an approach comparing conventional P-T estimate from equilibrated assemblages of rock-forming minerals with temperature data derived from yttrium-garnet-monazite (YGM) and yttrium-garnet-xenotime (YGX) geothermometry. Such a comparison provides an initial indication on differences between equilibration of major and trace elements. Regarding this purpose, two migmatites, two polycyclic and one monocyclic gneiss from the Central Alps (Switzerland, northern Italy) were investigated. While the polycyclic samples exhibit trace-element equilibration between monazite and garnet grains assigned to the same metamorphic event, there are relics of monazite and garnet obviously surviving independent of their textural position. These observations suggest that surface processes dominate transport processes during equilibration of those samples. The monocyclic gneiss, on the contrary, displays rare isolated monazite with equilibration of all elements, despite comparably large transport distances. With a nearly linear crystal-size distribution of the garnet grain population, growth kinetics, related to the major elements, were likely surface-controlled in this sample. In contrast to these completely equilibrated examples, the migmatites indicate disequilibrium between garnet and monazite with a change in REE patterns on garnet transects. The cause for this disequilibrium may be related to a potential disequilibrium initiated by a changing bulk chemistry during melt segregation. While migmatite environments are expected to support high transport rates (i.e. high temperatures and melt presence), the evolution of equilibration in migmatites is additionaly related to change in chemistry. As a key finding, surface-controlled equilibration kinetics seem to dominate transport-controlled processes in the investigated samples. This may be decisive information towards the understanding of age data derived from monazite.
Resumo:
BACKGROUND: Risky single-occasion drinking (RSOD) is a prevalent and potentially harmful alcohol use pattern associated with increased alcohol use disorder (AUD). However, RSOD is commonly associated with a higher level of alcohol intake, and most studies have not controlled for drinking volume (DV). Thus, it is unclear whether the findings provide information about RSOD or DV. This study sought to investigate the independent and combined effects of RSOD and DV on AUD. METHODS: Data were collected in the longitudinal Cohort Study on Substance Use Risk Factors (C-SURF) among 5598 young Swiss male alcohol users in their early twenties. Assessment included DV, RSOD, and AUD at two time points. Generalized linear models for binomial distributions provided evidence regarding associations of DV, RSOD, and their interaction. RESULTS: DV, RSOD, and their interaction were significantly related to the number of AUD criteria. The slope of the interaction was steeper for non/rare RSOD than for frequent RSOD. CONCLUSIONS: RSOD appears to be a harmful pattern of drinking, associated with increased AUD and it moderated the relationship between DV and AUD. This study highlighted the importance of taking drinking patterns into account, for both research and public health planning, since RSO drinkers constitute a vulnerable subgroup for AUD.
Resumo:
Among the largest resources for biological sequence data is the large amount of expressed sequence tags (ESTs) available in public and proprietary databases. ESTs provide information on transcripts but for technical reasons they often contain sequencing errors. Therefore, when analyzing EST sequences computationally, such errors must be taken into account. Earlier attempts to model error prone coding regions have shown good performance in detecting and predicting these while correcting sequencing errors using codon usage frequencies. In the research presented here, we improve the detection of translation start and stop sites by integrating a more complex mRNA model with codon usage bias based error correction into one hidden Markov model (HMM), thus generalizing this error correction approach to more complex HMMs. We show that our method maintains the performance in detecting coding sequences.
Resumo:
Hypertension (HTN) is a major risk factor for cardiovascular mortality, yet only a small proportion of hypertensive individuals receive appropriate therapy and achieve target blood pressure (BP) values. Factors influencing the success of antihypertensive therapy include physicians' acceptance of guideline BP targets, the efficacy and tolerability of the drug regimen, and patient compliance and persistence with therapy. It is now well recognised that most hypertensive patients require at least two antihypertensive agents to achieve their target BP. However, complicated treatment regimens are a major contributory factor to poor patient compliance. The use of combination therapy for HTN offers a number of advantages over the use of monotherapy, including improved efficacy, as drug combinations with a synergistic mechanism of action can be used. This additive effect means that lower doses of the individual components can be used, which may translate into a decreased likelihood of adverse events. The use of single-pill combination therapy, in which two or more agents are combined in a single dosage form, offers all the benefits of free combination therapy (improved efficacy and tolerability over monotherapy) together with the added benefit of improved patient compliance because of the simplified treatment regimen. The use of single-pill combination therapy may also be associated with cost savings compared with the use of free combinations for reasons of cheaper drug costs, fewer physician visits and fewer hospitalisations for uncontrolled HTN and cardiovascular events. Thus, the use of single-pill combination therapy for HTN should help improve BP goal attainment through improved patient compliance, leading to reduced costs for cardiovascular-related care.
Resumo:
Circadian cycles and cell cycles are two fundamental periodic processes with a period in the range of 1 day. Consequently, coupling between such cycles can lead to synchronization. Here, we estimated the mutual interactions between the two oscillators by time-lapse imaging of single mammalian NIH3T3 fibroblasts during several days. The analysis of thousands of circadian cycles in dividing cells clearly indicated that both oscillators tick in a 1:1 mode-locked state, with cell divisions occurring tightly 5 h before the peak in circadian Rev-Erbα-YFP reporter expression. In principle, such synchrony may be caused by either unidirectional or bidirectional coupling. While gating of cell division by the circadian cycle has been most studied, our data combined with stochastic modeling unambiguously show that the reverse coupling is predominant in NIH3T3 cells. Moreover, temperature, genetic, and pharmacological perturbations showed that the two interacting cellular oscillators adopt a synchronized state that is highly robust over a wide range of parameters. These findings have implications for circadian function in proliferative tissues, including epidermis, immune cells, and cancer.
Resumo:
Cultural variation in a population is affected by the rate of occurrence of cultural innovations, whether such innovations are preferred or eschewed, how they are transmitted between individuals in the population, and the size of the population. An innovation, such as a modification in an attribute of a handaxe, may be lost or may become a property of all handaxes, which we call "fixation of the innovation." Alternatively, several innovations may attain appreciable frequencies, in which case properties of the frequency distribution-for example, of handaxe measurements-is important. Here we apply the Moran model from the stochastic theory of population genetics to study the evolution of cultural innovations. We obtain the probability that an initially rare innovation becomes fixed, and the expected time this takes. When variation in cultural traits is due to recurrent innovation, copy error, and sampling from generation to generation, we describe properties of this variation, such as the level of heterogeneity expected in the population. For all of these, we determine the effect of the mode of social transmission: conformist, where there is a tendency for each naïve newborn to copy the most popular variant; pro-novelty bias, where the newborn prefers a specific variant if it exists among those it samples; one-to-many transmission, where the variant one individual carries is copied by all newborns while that individual remains alive. We compare our findings with those predicted by prevailing theories for rates of cultural change and the distribution of cultural variation.
Resumo:
Waveform-based tomographic imaging of crosshole georadar data is a powerful method to investigate the shallow subsurface because of its ability to provide images of electrical properties in near-surface environments with unprecedented spatial resolution. A critical issue with waveform inversion is the a priori unknown source signal. Indeed, the estimation of the source pulse is notoriously difficult but essential for the effective application of this method. Here, we explore the viability and robustness of a recently proposed deconvolution-based procedure to estimate the source pulse during waveform inversion of crosshole georadar data, where changes in wavelet shape with location as a result of varying near-field conditions and differences in antenna coupling may be significant. Specifically, we examine whether a single, average estimated source current function can adequately represent the pulses radiated at all transmitter locations during a crosshole georadar survey, or whether a separate source wavelet estimation should be performed for each transmitter gather. Tests with synthetic and field data indicate that remarkably good tomographic reconstructions can be obtained using a single estimated source pulse when moderate to strong variability exists in the true source signal with antenna location. Only in the case of very strong variability in the true source pulse are tomographic reconstructions clearly improved by estimating a different source wavelet for each transmitter location.