Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Pregnancy outcome after methotrexate treatment for rheumatic disease prior to or during early pregnancy: a prospective multicenter cohort study.

OBJECTIVE: High-dose methotrexate (MTX) exposure during pregnancy is associated with embryopathy. The teratogenic potential of MTX at dosages typically used in the treatment of rheumatic diseases remains uncertain. The aim of this study was to evaluate the risk of spontaneous abortion, major birth defects, elective termination of pregnancy, shortened gestational age at delivery, and reduced birth weight in women exposed to MTX. METHODS: Pregnancy outcome in women taking MTX (≤30 mg/week) either after conception or within the 12 weeks before conception was evaluated in a prospective observational multicenter cohort study. Pregnancy outcomes in the MTX group were compared to outcomes in a group of disease-matched women and a group of women without autoimmune diseases (neither group was exposed to MTX). RESULTS: The study sample included 324 MTX-exposed pregnancies (188 exposed post-conception, 136 exposed pre-conception), 459 disease-matched comparison women, and 1,107 comparison women without autoimmune diseases. In the post-conception cohort, the cumulative incidence of spontaneous abortion was 42.5% (95% confidence interval [95% CI] 29.2-58.7), which was significantly higher than the incidence of spontaneous abortion in either comparison group. The risk of major birth defects (7 of 106 [6.6%]) was elevated compared to both the cohort of women without autoimmune diseases (29 of 1,001 [2.9%]) (adjusted odds ratio [OR] 3.1 [95% CI 1.03-9.5]) and the disease-matched cohort (14 of 393 [3.6%]) (adjusted OR 1.8 [95% CI 0.6-5.7]). None of the malformations were clearly consistent with MTX embryopathy. Neither the cumulative incidence of spontaneous abortion (14.4% [95% CI 8.0-25.3]) nor the risk of major birth defects (4 of 114 [3.5%]) was increased in the pre-conception cohort. Elective termination rates were increased in both of the MTX-exposed cohorts. There were no other significant differences among groups in other study end points. CONCLUSION: Post-conception administration of MTX at dosages typically used in the treatment of rheumatic diseases was associated with an increased risk of major birth defects and spontaneous abortion. Such evidence was not found among women in our pre-conception cohort.

Prescription footwear for severe injuries of foot and ankle: effect on regularity and symmetry of the gait assessed by trunk accelerometry.

After foot and/or ankle fracture, the restoration of optimal gait symmetry is one of the criteria of recovery. Orthotic insoles and orthopaedic shoes improve gait symmetry and regularity by controlling joint motion and improving alignment. The aim of the present study was to assess the effect of prescription footwear on gait quality by using accelerometers attached to the lower back. Sixteen adult patients with persistent disability after ankle and/or foot fractures performed two 30-s walking trials with and without prescription footwear (insoles and stabilizing shoes). Sixteen control subjects were also tested for comparison. The autocorrelation function was computed from the acceleration signal and the first two dominant periods were assessed (d1 and d2). Two parameters were used: (1) Stride Regularity (SR) which expresses the similarity between strides over time (d2), and (2) Stride Symmetry (SS) a ratio (d1/d2) which expresses the left/right similarity of gait independently of repeatability in the successive movements of each limb. In control subjects, SR and SS were 0.86+/-0.05 (correlation coefficient) and 81+/-10%, respectively. In the patient group, the effect of footwear was significant (SR: 0.88+/-0.06 vs. 0.90+/-0.05, SS: 38+/-23% vs. 46+/-27%). Pain was also significantly reduced (-34%). By using a rapid and low-cost method, we objectively quantified gait quality improvement after footwear intervention, concomitant to pain reduction. Substantial inter-patient variability in the footwear outcome was observed. In conclusion, we believe that trunk accelerometry can be a useful tool in the field of gait rehabilitation.

Two-year outcome of an observe-and-plan regimen for neovascular age-related macular degeneration: how to alleviate the clinical burden with maintained functional results.

PurposeThe purpose of this study was to report the 2-year outcome of an individually tailored 'observe-and-plan' treatment regimen for neovascular age-related macular degeneration (nAMD), and to investigate its clinical value in terms of functional outcome. This regimen aimed to reduce the clinical burden (visits) by employing individually fixed injection intervals, based on the predictability of an individual's need for retreatment.MethodsThis prospective case series included 104 patients (115 eyes) with nAMD. Following three loading doses of ranibizumab, the disease recurrence interval was determined in monthly observation visits. Retreatment was applied in a series of three injections with individually fixed intervals (2 weeks shorter than the recurrence interval), combined with periodic adjustment of the intervals. The allowed injection intervals in treatment plans ranged from 1 to 3 months. If there was no recurrence at 3 months, the patient could change to monitoring alone.ResultsMean visual acuity (VA) improved by 8.7, 9.7, and 9.2 letters at months 3, 12, and 24, respectively. The mean number of injections was 7.8 and 5.8 during years 1 and 2, respectively, whereas the mean number of ophthalmic examinations was 4.0 and 2.9, respectively. The mean treatment interval (after the loading doses) was 2.0 months during year 1, and 2.2 months during year 2.ConclusionThe observe-and-plan regimen significantly improved and maintained VA over the course of 2 years. This favourable functional outcome was achieved with fewer clinic visits compared with other regimens. Therefore, this observe-and-plan regimen has the potential to alleviate the clinical burden of nAMD treatment.Eye advance online publication, 7 November 2014; doi:10.1038/eye.2014.258.

Measurement Errors Should Always Be Incorporated in Phylogenetic Comparative Analysis

The evolution of continuous traits is the central component of comparative analyses in phylogenetics, and the comparison of alternative models of trait evolution has greatly improved our understanding of the mechanisms driving phenotypic differentiation. Several factors influence the comparison of models, and we explore the effects of random errors in trait measurement on the accuracy of model selection. We simulate trait data under a Brownian motion model (BM) and introduce different magnitudes of random measurement error. We then evaluate the resulting statistical support for this model against two alternative models: Ornstein-Uhlenbeck (OU) and accelerating/decelerating rates (ACDC). Our analyses show that even small measurement errors (10%) consistently bias model selection towards erroneous rejection of BM in favour of more parameter-rich models (most frequently the OU model). Fortunately, methods that explicitly incorporate measurement errors in phylogenetic analyses considerably improve the accuracy of model selection. Our results call for caution in interpreting the results of model selection in comparative analyses, especially when complex models garner only modest additional support. Importantly, as measurement errors occur in most trait data sets, we suggest that estimation of measurement errors should always be performed during comparative analysis to reduce chances of misidentification of evolutionary processes.

Personality traits influence clinical outcome in day hospital-treated elderly depressed patients

OBJECTIVES: Although personality traits are considered significant predictors of both physical and mental health, their specific impact on treatment outcome in elderly patients with depression remains largely unexplored. Impact of personality traits on the evolution of depressive symptoms, quality of life, and perception of clinical progress was assessed in a psychotherapeutic community. DESIGN: A prospective longitudinal study was conducted in 62 elderly outpatients. SETTING: Day hospital treatment as usual combined group and individual therapies, pharmacological treatment, as well as family and network meetings. PARTICIPANTS: Patients presented with major depression or a depressive episode of bipolar disease. MEASUREMENTS: The Geriatric Depression Scale, the Short Form Survey, and the Therapeutic Community Assessment scale were administrated at admission, 3, 6, 12 months, and at discharge. Personality was evaluated with the NEO Five-Factor Personality Inventory. RESULTS: Outcome revealed reduced depression and improved mental quality of life and clinical progress. Higher Geriatric Depression Scale scores were found in individuals with higher levels of Neuroticism (and its Vulnerability facet). Better self-perception of clinical progress was observed in individuals with lower levels of the Depressiveness and Modesty facets and higher openness to action. Improvement in quality of life was predicted by high Positive emotions facet. All these associations remained significant after controlling for age, gender, and treatment length. CONCLUSION: Personality traits may predict clinical outcome in psychotherapeutic hospital day care for elderly patients with depression.

Pregnancy outcome following exposure to topical retinoids: a multicenter prospective study.

Concerns have been raised about the use of topical retinoids since the publication of isolated cases of characteristic retinoid embryopathy, originally described after oral use. A collaborative study of the European Network of Teratology Information Services was carried out to evaluate the rate of congenital malformations following first-trimester topical retinoid exposure. A population of 235 exposed pregnant women was compared with 444 controls. No significant differences were observed between groups with regard to the rates of spontaneous abortion (odds ratio [95% confidence interval], 1.5 [0.8-2.7]), minor birth defects (1.3 [0.4-3.7]), and major birth defects (1.8 [0.6-5.4]). No child showed features of retinoid embryopathy. The rate of elective termination in the exposed group was increased 3-fold (3.4 [1.5-7.8]). In conclusion, these results do not suggest an increased risk of retinoid embryopathy. However, according to current knowledge, topical retinoids cannot be advised for use during pregnancy because their risk/benefit ratio remains questionable.

Outcome and prognostic factors in olfactory neuroblastoma: a rare cancer network study.

Purpose: To assess the outcome in patients with olfactory neuroblastoma (ONB). Methods and Materials: Seventy-seven patients treated for nonmetastatic ONB between 1971 and 2004 were included. According to Kadish classification, there were 11 patients with Stage A, 29 with Stage B, and 37 with Stage C. T-classification included 9 patients with T1, 26 with T2, 16 with T3, 15 with T4a, and 11 with T4b tumors. Sixty-eight patients presented with N0 (88%) disease. Results: Most of the patients (n = 56, 73 %) benefited from surgery (S), and total excision was possible in 44 patients (R0 in 32, R1 in 13, R2 in 11). All but five patients benefited from RT, and chemotherapy was given in 21(27%). Median follow-up period was 72 months (range, 6-315). The 5-year overall survival (OS), disease-free survival (DES), locoregional control, and local control were 64%, 57%, 62%, and 70%, respectively. In univariate analyses, favorable factors were Kadish A or B disease, T1 T3 tumors, no nodal involvement, curative surgery, R0/R1 resection, and RT-dose 54 Gy or higher. Multivariate analysis revealed that the best independent factors predicting the outcome were T1 T3, N0, R0/R1 resection, and total RT dose (54 Gy or higher). Conclusion: In this multicenter retrospective study, patients with ONB treated with R0 or R1 surgical resection followed by at least 54-Gy postoperative RT had the best outcome. Novel strategies including concomitant chemotherapy and/or higher dose RT should be prospectively investigated in this rare disease for which local failure remains a problem.

Minimally invasive versus open transforaminal lumbar interbody fusion: evaluating initial experience.

The aim of this study was to compare our experience with minimally invasive transforaminal lumbar interbody fusion (MITLIF) and open midline transforaminal lumbar interbody fusion (TLIF). A total of 36 patients suffering from isthmic spondylolisthesis or degenerative disc disease were operated with either a MITLIF (n = 18) or an open TLIF technique (n = 18) with an average follow-up of 22 and 24 months, respectively. Clinical outcome was assessed using the visual analogue scale (VAS) and the Oswestry disability index (ODI). There was no difference in length of surgery between the two groups. The MITLIF group resulted in a significant reduction of blood loss and had a shorter length of hospital stay. No difference was observed in postoperative pain, initial analgesia consumption, VAS or ODI between the groups. Three pseudarthroses were observed in the MITLIF group although this was not statistically significant. A steeper learning effect was observed for the MITLIF group.

Negative impact of hypocaloric feeding and energy balance on clinical outcome in ICU patients

Résumé Introduction : Les patients nécessitant une prise en charge prolongée en milieu de soins intensifs et présentant une évolution compliquée, développent une réponse métabolique intense caractérisée généralement par un hypermétabolisme et un catabolisme protéique. La sévérité de leur atteinte pathologique expose ces patients à la malnutrition, due principalement à un apport nutritionnel insuffisant, et entraînant une balance énergétique déficitaire. Dans un nombre important d'unités de soins intensifs la nutrition des patients n'apparaît pas comme un objectif prioritaire de la prise en charge. En menant une étude prospective d'observation afin d'analyser la relation entre la balance énergétique et le pronostic clinique des patients avec séjours prolongés en soins intensifs, nous souhaitions changer cette attitude et démonter l'effet délétère de la malnutrition chez ce type de patient. Méthodes : Sur une période de 2 ans, tous les patients, dont le séjour en soins intensifs fut de 5 jours ou plus, ont été enrôlés. Les besoins en énergie pour chaque patient ont été déterminés soit par calorimétrie indirecte, soit au moyen d'une formule prenant en compte le poids du patient (30 kcal/kg/jour). Les patients ayant bénéficié d'une calorimétrie indirecte ont par ailleurs vérifié la justesse de la formule appliquée. L'âge, le sexe le poids préopératoire, la taille, et le « Body mass index » index de masse corporelle reconnu en milieu clinique ont été relevés. L'énergie délivrée l'était soit sous forme nutritionnelle (administration de nutrition entérale, parentérale ou mixte) soit sous forme non-nutritionnelle (perfusions : soluté glucosé, apport lipidique non nutritionnel). Les données de nutrition (cible théorique, cible prescrite, énergie nutritionnelle, énergie non-nutritionnelle, énergie totale, balance énergétique nutritionnelle, balance énergétique totale), et d'évolution clinique (nombre des jours de ventilation mécanique, nombre d'infections, utilisation des antibiotiques, durée du séjour, complications neurologiques, respiratoires gastro-intestinales, cardiovasculaires, rénales et hépatiques, scores de gravité pour patients en soins intensifs, valeurs hématologiques, sériques, microbiologiques) ont été analysées pour chacun des 669 jours de soins intensifs vécus par un total de 48 patients. Résultats : 48 patients de 57±16 ans dont le séjour a varié entre 5 et 49 jours (motif d'admission : polytraumatisés 10; chirurgie cardiaque 13; insuffisance respiratoire 7; pathologie gastro-intestinale 3; sepsis 3; transplantation 4; autre 8) ont été retenus. Si nous n'avons pu démontrer une relation entre la balance énergétique et plus particulièrement, le déficit énergétique, et la mortalité, il existe une relation hautement significative entre le déficit énergétique et la morbidité, à savoir les complications et les infections, qui prolongent naturellement la durée du séjour. De plus, bien que l'étude ne comporte aucune intervention et que nous ne puissions avancer qu'il existe une relation de cause à effet, l'analyse par régression multiple montre que le facteur pronostic le plus fiable est justement la balance énergétique, au détriment des scores habituellement utilisés en soins intensifs. L'évolution est indépendante tant de l'âge et du sexe, que du status nutritionnel préopératoire. L'étude ne prévoyait pas de récolter des données économiques : nous ne pouvons pas, dès lors, affirmer que l'augmentation des coûts engendrée par un séjour prolongé en unité de soins intensifs est induite par un déficit énergétique, même si le bon sens nous laisse penser qu'un séjour plus court engendre un coût moindre. Cette étude attire aussi l'attention sur l'origine du déficit énergétique : il se creuse au cours de la première semaine en soins intensifs, et pourrait donc être prévenu par une intervention nutritionnelle précoce, alors que les recommandations actuelles préconisent un apport énergétique, sous forme de nutrition artificielle, qu'à partir de 48 heures de séjour aux soins intensifs. Conclusions : L'étude montre que pour les patients de soins intensifs les plus graves, la balance énergétique devrait être considérée comme un objectif important de la prise en charge, nécessitant l'application d'un protocole de nutrition précoce. Enfin comme l'évolution à l'admission des patients est souvent imprévisible, et que le déficit s'installe dès la première semaine, il est légitime de s'interroger sur la nécessité d'appliquer ce protocole à tous les patients de soins intensifs et ceci dès leur admission. Summary Background and aims: Critically ill patients with complicated evolution are frequently hypermetabolic, catabolic, and at risk of underfeeding. The study aimed at assessing the relationship between energy balance and outcome in critically ill patients. Methods: Prospective observational study conducted in consecutive patients staying 5 days in the surgical ICU of a University hospital. Demographic data, time to feeding, route, energy delivery, and outcome were recorded. Energy balance was calculated as energy delivery minus target. Data in means+ SD, linear regressions between energy balance and outcome variables. Results: Forty eight patients aged 57±16 years were investigated; complete data are available in 669 days. Mechanical ventilation lasted 11±8 days, ICU stay 15+9 was days, and 30-days mortality was 38%. Time to feeding was 3.1 ±2.2 days. Enteral nutrition was the most frequent route with 433 days. Mean daily energy delivery was 1090±930 kcal. Combining enteral and parenteral nutrition achieved highest energy delivery. Cumulated energy balance was between -12,600+ 10,520 kcal, and correlated with complications (P<0.001), already after 1 week. Conclusion: Negative energy balances were correlated with increasing number of complications, particularly infections. Energy debt appears as a promising tool for nutritional follow-up, which should be further tested. Delaying initiation of nutritional support exposes the patients to energy deficits that cannot be compensated later on.

The scarf osteotomy for the treatment of hallux valgus deformity: a review of 84 cases.

This study reviewed the subjective, clinical and radiological outcome of 71 patients (84 feet) treated by scarf osteotomy for hallux valgus deformity at our institution from 1995 to 1998 with an average follow-up time of 22 months (range, 17 to 48 months). At the time of follow-up, 39% of the patients were very satisfied, 50% were satisfied and 11% were not satisfied. The mean AOFAS score raised significantly from 43 points (14-68) preoperatively to 82 points (39 to 100) at follow-up (p &lt; 0.001). The radiological angles including M1-M2, M1-P1, M1-M5 and DMAA improved significantly (p &lt; 0.001). Among the 16 complications recorded, seven (8%) were minor and nine (11%) required an additional procedure. The scarf osteotomy of the first metatarsal coupled with a lateral soft-tissue release and, in three-quarters of our cases, with a basal closing wedge varisation osteotomy of the first phalanx, resulted in overall high satisfaction rate as well as significant clinical and radiological improvements in our series. Nevertheless, the range of motion of the first MP joint remained low: 30 degrees to 74 degrees in 52 patients (62%) and &lt;30 degrees in four patients (5%). Furthermore, the mobility of the first ray as well as the consequences of the procedure in the sagittal plane need to be assessed more accurately, and this may be achieved by incorporating measurement of the plantar pressures in the forefoot area into the global rating system.