An interpretation of the deep seismic lines from the Penninic Alps of Valais (Switzerland)

The upper part of three deep seismic lines running across the Penninic Swiss Alps of Valais have been studied. Numerous reflectors illustrate the nappe structure of this internal part of the orogen. These reflectors, even at great depths (20-25 km), can be correlated with outcropping geological features and are most likely produced by lithological boundaries rather than by mylonites zones, which are hardly reflective in such an environment. Our interpretations, largely constrained by projections of the outcropping geology, have improved our knowledge of the deep structure of this segment of the Alpine belt, enhancing the importance of the backfolding and the crustal scale deformation phase which produced the Rawil-Valpelline depression and the Aar-Toce culmination. Furthermore we have here the possibility of correlating seismic patterns produced by ductile folds with the outcropping structures.

Oceanic intraplate volcanoes exposed: Example from seamounts accreted in Panama

Two Paleogene ocean islands are exposed in the Azuero Peninsula, west Panama, within sequences accreted in the early-Middle Eocene. A multidisciplinary approach involving litho-logic mapping, paleontological age determinations, and petrological study allows reconstruction of the stratigraphy and magmatic evolution of one of these intraplate oceanic volcanoes. From base to top, the volcano's structure comprises submarine basaltic lava flows locally interlayered with hemipelagic sediments, basaltic breccias, shallow-water limestones, and subaerial basaltic lava. Gabbros and basaltic dikes were emplaced along a rift zone of the island. Geochemical trends of basaltic lavas include decreased Mg# {[Mg/(Mg + Fe)] * 100} and, with time, increased incompatible element contents thought to be representative of many poorly documented intraplate volcanoes in the Pacific. Our results show that, in addition to deep drilling, the roots of oceanic islands can be explored through studies of accreted and subaerially exhumed oceanic sequences.

Structural analysis of Turtle mountain (Alberta) using digital elevation model: Toward a progressive failure

In 1903, the eastern slope of Turtle Mountain (Alberta) was affected by a 30 M m3-rockslide named Frank Slide that resulted in more than 70 casualties. Assuming that the main discontinuity sets, including bedding, control part of the slope morphology, the structural features of Turtle Mountain were investigated using a digital elevation model (DEM). Using new landscape analysis techniques, we have identified three main joint and fault sets. These results are in agreement with those sets identified through field observations. Landscape analysis techniques, using a DEM, confirm and refine the most recent geology model of the Frank Slide. The rockslide was initiated along bedding and a fault at the base of the slope and propagated up slope by a regressive process following a surface composed of pre-existing discontinuities. The DEM analysis also permits the identification of important geological structures along the 1903 slide scar. Based on the so called Sloping Local Base Level (SLBL) an estimation was made of the present unstable volumes in the main scar delimited by the cracks, and around the south area of the scar (South Peak). The SLBL is a method permitting a geometric interpretation of the failure surface based on a DEM. Finally we propose a failure mechanism permitting the progressive failure of the rock mass that considers gentle dipping wedges (30°). The prisms or wedges defined by two discontinuity sets permit the creation of a failure surface by progressive failure. Such structures are more commonly observed in recent rockslides. This method is efficient and is recommended as a preliminary analysis prior to field investigation.

Contact metamorphism and emplacement of the western Adamello tonalite

The geodynamic forces acting in the Earth's interior manifest themselves in a variety of ways. Volcanoes are amongst the most impressive examples in this respect, but like with an iceberg, they only represent the tip of a more extensive system hidden underground. This system consists of a source region where melt forms and accumulates, feeder connections in which magma is transported towards the surface, and different reservoirs where it is stored before it eventually erupts to form a volcano. A magma represents a mixture of melt and crystals. The latter can be extracted from the source region, or form anywhere along the path towards their final crystallization place. They will retain information of the overall plumbing system. The host rocks of an intrusion, in contrast, provide information at the emplacement level. They record the effects of thermal and mechanical forces imposed by the magma. For a better understanding of the system, both parts - magmatic and metamorphic petrology - have to be integrated. I will demonstrate in my thesis that information from both is complementary. It is an iterative process, using constraints from one field to better constrain the other. Reading the history of the host rocks is not always straightforward. This is shown in chapter two, where a model for the formation of clustered garnets observed in the contact aureole is proposed. Fragments of garnets, older than the intrusive rocks are overgrown by garnet crystallizing due to the reheating during emplacement of the adjacent pluton. The formation of the clusters is therefore not a single event as generally assumed but the result of a two-stage process, namely the alteration of the old grains and the overgrowth and amalgamation of new garnet rims. This makes an important difference when applying petrological methods such as thermobarometry, geochronology or grain size distributions. The thermal conditions in the aureole are a strong function of the emplacement style of the pluton. therefore it is necessary to understand the pluton before drawing conclusions about its aureole. A study investigating the intrusive rocks by means of field, geochemical, geochronologi- cal and structural methods is presented in chapter three. This provided important information about the assembly of the intrusion, but also new insights on the nature of large, homogeneous plutons and the structure of the plumbing system in general. The incremental nature of the emplacement of the Western Adamello tonalité is documented, and the existence of an intermediate reservoir beneath homogeneous plutons is proposed. In chapter four it is demonstrated that information extracted from the host rock provides further constraints on the emplacement process of the intrusion. The temperatures obtain by combining field observations with phase petrology modeling are used together with thermal models to constrain the magmatic activity in the immediate intrusion. Instead of using the thermal models to control the petrology result, the inverse is done. The model parameters were changed until a match with the aureole temperatures was obtained. It is shown, that only a few combinations give a positive match and that temperature estimates from the aureole can constrain the frequency of ancient magmatic systems. In the fifth chapter, the Anisotropy of Magnetic Susceptibility of intrusive rocks is compared to 3D tomography. The obtained signal is a function of the shape and distribution of ferromagnetic grains, and is often used to infer flow directions of magma. It turns out that the signal is dominated by the shape of the magnetic crystals, and where they form tight clusters, also by their distribution. This is in good agreement with the predictions made in the theoretical and experimental literature. In the sixth chapter arguments for partial melting of host rock carbonates are presented. While at first very surprising, this is to be expected when considering the prior results from the intrusive study and experiments from the literature. Partial melting is documented by compelling microstructures, geochemical and structural data. The necessary conditions are far from extreme and this process might be more frequent than previously thought. The carbonate melt is highly mobile and can move along grain boundaries, infiltrating other rocks and ultimately alter the existing mineral assemblage. Finally, a mineralogical curiosity is presented in chapter seven. The mineral assemblage magne§site and calcite is in apparent equilibrium. It is well known that these two carbonates are not stable together in the system Ca0-Mg0-Fe0-C02. Indeed, magnesite and calcite should react to dolomite during metamorphism. The presented explanation for this '"forbidden" assemblage is, that a calcite melt infiltrated the magnesite bearing rock along grain boundaries and caused the peculiar microstructure. This is supported by isotopie disequilibrium between calcite and magnesite. A further implication of partially molten carbonates is, that the host rock drastically looses its strength so that its physical properties may be comparable to the ones of the intrusive rocks. This contrasting behavior of the host rock may ease the emplacement of the intrusion. We see that the circle closes and the iterative process of better constraining the emplacement could start again. - La Terre est en perpétuel mouvement et les forces tectoniques associées à ces mouvements se manifestent sous différentes formes. Les volcans en sont l'un des exemples les plus impressionnants, mais comme les icebergs, les laves émises en surfaces ne représentent que la pointe d'un vaste système caché dans les profondeurs. Ce système est constitué d'une région source, région où la roche source fond et produit le magma ; ce magma peut s'accumuler dans cette région source ou être transporté à travers différents conduits dans des réservoirs où le magma est stocké. Ce magma peut cristalliser in situ et produire des roches plutoniques ou alors être émis en surface. Un magma représente un mélange entre un liquide et des cristaux. Ces cristaux peuvent être extraits de la source ou se former tout au long du chemin jusqu'à l'endroit final de cristallisation. L'étude de ces cristaux peut ainsi donner des informations sur l'ensemble du système magmatique. Au contraire, les roches encaissantes fournissent des informations sur le niveau d'emplacement de l'intrusion. En effet ces roches enregistrent les effets thermiques et mécaniques imposés par le magma. Pour une meilleure compréhension du système, les deux parties, magmatique et métamorphique, doivent être intégrées. Cette thèse a pour but de montrer que les informations issues de l'étude des roches magmatiques et des roches encaissantes sont complémentaires. C'est un processus itératif qui utilise les contraintes d'un domaine pour améliorer la compréhension de l'autre. Comprendre l'histoire des roches encaissantes n'est pas toujours aisé. Ceci est démontré dans le chapitre deux, où un modèle de formation des grenats observés sous forme d'agrégats dans l'auréole de contact est proposé. Des fragments de grenats plus vieux que les roches intru- sives montrent une zone de surcroissance générée par l'apport thermique produit par la mise en place du pluton adjacent. La formation des agrégats de grenats n'est donc pas le résultat d'un seul événement, comme on le décrit habituellement, mais d'un processus en deux phases, soit l'altération de vieux grains engendrant une fracturation de ces grenats, puis la formation de zone de surcroissance autour de ces différents fragments expliquant la texture en agrégats observée. Cette interprétation en deux phases est importante, car elle engendre des différences notables lorsque l'on applique des méthodes pétrologiques comme la thermobarométrie, la géochronologie ou encore lorsque l'on étudie la distribution relative de la taille des grains. Les conditions thermales dans l'auréole de contact dépendent fortement du mode d'emplacement de l'intrusion et c'est pourquoi il est nécessaire de d'abord comprendre le pluton avant de faire des conclusions sur son auréole de contact. Une étude de terrain des roches intrusives ainsi qu'une étude géochimique, géochronologique et structurale est présente dans le troisième chapitre. Cette étude apporte des informations importantes sur la formation de l'intrusion mais également de nouvelles connaissances sur la nature de grands plutons homogènes et la structure de système magmatique en général. L'emplacement incrémental est mis en évidence et l'existence d'un réservoir intermédiaire en-dessous des plutons homogènes est proposé. Le quatrième chapitre de cette thèse illustre comment utiliser l'information extraite des roches encaissantes pour expliquer la mise en place de l'intrusion. Les températures obtenues par la combinaison des observations de terrain et l'assemblage métamorphique sont utilisées avec des modèles thermiques pour contraindre l'activité magmatique au contact directe de cette auréole. Au lieu d'utiliser le modèle thermique pour vérifier le résultat pétrologique, une approche inverse a été choisie. Les paramètres du modèle ont été changés jusqu'à ce qu'on obtienne une correspondance avec les températures observées dans l'auréole de contact. Ceci montre qu'il y a peu de combinaison qui peuvent expliquer les températures et qu'on peut contraindre la fréquence de l'activité magmatique d'un ancien système magmatique de cette manière. Dans le cinquième chapitre, les processus contrôlant l'anisotropie de la susceptibilité magnétique des roches intrusives sont expliqués à l'aide d'images de la distribution des minéraux dans les roches obtenues par tomographie 3D. Le signal associé à l'anisotropie de la susceptibilité magnétique est une fonction de la forme et de la distribution des grains ferromagnétiques. Ce signal est fréquemment utilisé pour déterminer la direction de mouvement d'un magma. En accord avec d'autres études de la littérature, les résultats montrent que le signal est dominé par la forme des cristaux magnétiques, ainsi que par la distribution des agglomérats de ces minéraux dans la roche. Dans le sixième chapitre, une étude associée à la fusion partielle de carbonates dans les roches encaissantes est présentée. Si la présence de liquides carbonatés dans les auréoles de contact a été proposée sur la base d'expériences de laboratoire, notre étude démontre clairement leur existence dans la nature. La fusion partielle est documentée par des microstructures caractéristiques pour la présence de liquides ainsi que par des données géochimiques et structurales. Les conditions nécessaires sont loin d'être extrêmes et ce processus pourrait être plus fréquent qu'attendu. Les liquides carbonatés sont très mobiles et peuvent circuler le long des limites de grain avant d'infiltrer d'autres roches en produisant une modification de leurs assemblages minéralogiques. Finalement, une curiosité minéralogique est présentée dans le chapitre sept. L'assemblage de minéraux de magnésite et de calcite en équilibre apparent est observé. Il est bien connu que ces deux carbonates ne sont pas stables ensemble dans le système CaO-MgO-FeO-CO.,. En effet, la magnésite et la calcite devraient réagir et produire de la dolomite pendant le métamorphisme. L'explication présentée pour cet assemblage à priori « interdit » est que un liquide carbonaté provenant des roches adjacentes infiltre cette roche et est responsable pour cette microstructure. Une autre implication associée à la présence de carbonates fondus est que la roche encaissante montre une diminution drastique de sa résistance et que les propriétés physiques de cette roche deviennent comparables à celles de la roche intrusive. Cette modification des propriétés rhéologiques des roches encaissantes peut faciliter la mise en place des roches intrusives. Ces différentes études démontrent bien le processus itératif utilisé et l'intérêt d'étudier aussi bien les roches intrusives que les roches encaissantes pour la compréhension des mécanismes de mise en place des magmas au sein de la croûte terrestre.

3D geoelectrical monitoring to follow hydric soil behaviour during rainfall

RESUME Durant les dernières années, les méthodes électriques ont souvent été utilisées pour l'investigation des structures de subsurface. L'imagerie électrique (Electrical Resistivity Tomography, ERT) est une technique de prospection non-invasive et spatialement intégrée. La méthode ERT a subi des améliorations significatives avec le développement de nouveaux algorithmes d'inversion et le perfectionnement des techniques d'acquisition. La technologie multicanale et les ordinateurs de dernière génération permettent la collecte et le traitement de données en quelques heures. Les domaines d'application sont nombreux et divers: géologie et hydrogéologie, génie civil et géotechnique, archéologie et études environnementales. En particulier, les méthodes électriques sont souvent employées dans l'étude hydrologique de la zone vadose. Le but de ce travail est le développement d'un système de monitorage 3D automatique, non- invasif, fiable, peu coûteux, basé sur une technique multicanale et approprié pour suivre les variations de résistivité électrique dans le sous-sol lors d'événements pluvieux. En raison des limitations techniques et afin d'éviter toute perturbation physique dans la subsurface, ce dispositif de mesure emploie une installation non-conventionnelle, où toutes les électrodes de courant sont placées au bord de la zone d'étude. Le dispositif le plus approprié pour suivre les variations verticales et latérales de la résistivité électrique à partir d'une installation permanente a été choisi à l'aide de modélisations numériques. Les résultats démontrent que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle et plus apte à détecter les variations latérales et verticales de la résistivité électrique, et cela malgré la configuration non-conventionnelle des électrodes. Pour tester l'efficacité du système proposé, des données de terrain ont été collectées sur un site d'étude expérimental. La technique de monitorage utilisée permet de suivre le processus d'infiltration 3D pendant des événements pluvieux. Une bonne corrélation est observée entre les résultats de modélisation numérique et les données de terrain, confirmant par ailleurs que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle. La nouvelle technique de monitorage 3D de résistivité électrique permet de caractériser les zones d'écoulement préférentiel et de caractériser le rôle de la lithologie et de la pédologie de manière quantitative dans les processus hydrologiques responsables d'écoulement de crue. ABSTRACT During the last years, electrical methods were often used for the investigation of subsurface structures. Electrical resistivity tomography (ERT) has been reported to be a useful non-invasive and spatially integrative prospecting technique. The ERT method provides significant improvements, with the developments of new inversion algorithms, and the increasing efficiency of data collection techniques. Multichannel technology and powerful computers allow collecting and processing resistivity data within few hours. Application domains are numerous and varied: geology and hydrogeology, civil engineering and geotechnics, archaeology and environmental studies. In particular, electrical methods are commonly used in hydrological studies of the vadose zone. The aim of this study was to develop a multichannel, automatic, non-invasive, reliable and inexpensive 3D monitoring system designed to follow electrical resistivity variations in soil during rainfall. Because of technical limitations and in order to not disturb the subsurface, the proposed measurement device uses a non-conventional electrode set-up, where all the current electrodes are located near the edges of the survey grid. Using numerical modelling, the most appropriate arrays were selected to detect vertical and lateral variations of the electrical resistivity in the framework of a permanent surveying installation system. The results show that a pole-dipole array has a better resolution than a pole-pole array and can successfully follow vertical and lateral resistivity variations despite the non-conventional electrode configuration used. Field data are then collected at a test site to assess the efficiency of the proposed monitoring technique. The system allows following the 3D infiltration processes during a rainfall event. A good correlation between the results of numerical modelling and field data results can be observed since the field pole-dipole data give a better resolution image than the pole-pole data. The new device and technique makes it possible to better characterize the zones of preferential flow and to quantify the role of lithology and pedology in flood- generating hydrological processes.

Siliceous deep-sea sponge Monorhaphis chuni: A potential paleoclimate archive in ancient animals

The deep-sea sponge Monorhaphis chuni forms giant basal spicules, which can reach lengths of 3 m; they represent the largest biogenic silica structures on Earth that is formed from an individual metazoan. The spicules offer a unique opportunity to record environmental change of past oceanic and climatic conditions. A giant spicule collected in the East China Sea in a depth of 1110 m was investigated. The oxygen isotopic composition and Mg/Ca ratios determined along center-to-surface segments are used as geochemical proxies for the assessment of seawater paleotemperatures. Calculations are based on the assumption that the calculated temperature near the surface of the spicule is identical with the average ambient temperature of 4 degrees C. A seawater temperature of 1.9 degrees C is inferred for the beginning of the lifespan of the Monorhaphis specimen. The temperature increases smoothly to 2.3 degrees C, to be followed by sharply increased and variable temperatures up to 6-10 degrees C. In the outer part of the spicule, the inferred seawater temperature is about 4 degrees C. The lifespan of the spicule can be estimated to 11,000 +/- 3000 years using the long-term trend of the inferred temperatures fitted to the seawater temperature age relationships since the Last Glacial Maximum. Specimens of Monorhaphis therefore represents one the oldest living animals on Earth. The remarkable temperature spikes of the ambient seawater occurring 9500-3100 years B.P. are explained by discharges of hydrothermal fluids in the neighborhood of the spicule. The irregular lamellar organization of the spicule and the elevated Mn concentrations during the high-temperature growth are consistent with a hydrothermal fluid input. (C) 2012 Elsevier B.V. All rights reserved.

Migration of sharks into freshwater systems during the Miocene and implications for Alpine paleoelevation

Trace-element and isotopic compositions of fossilized shark teeth sampled from Miocene marine sediments of the north Alpine Molasse Basin, the Vienna Basin, and the Pannonian Basin generally show evidence of formation in a marine environment under conditions geochemically equivalent to the open ocean. In contrast, two of eight shark teeth from the Swiss Upper Marine Molasse locality of La Moliere have extremely low delta O-18 values (10.3% and 11.3%) and low Sr-87/Sr-86 ratios (0.707840 and 0.707812) compared to other teeth from this locality (21.1%,22.4%o and 0.708421-0.708630). The rare earth element (REE) abundances and patterns from La Moliere not only differ between dentine and enameloid of the same tooth, but also between different teeth, supporting variable conditions of diagenesis at this site. However, the REE patterns of enameloid from the ``exotic'' teeth analyzed for O and Sr isotopic compositions are similar to those of teeth that have O and Sr isotopic compositions typical of a marine setting at this site. Collectively, this suggests that the two ``exotic'' teeth were formed while the sharks frequented a freshwater environment with very low O-18-content and Sr isotopic composition controlled by Mesozoic calcareous rocks. This is consistent with a paleogeography of high-elevation (similar to 2300 m) Miocene Alps adjacent to a marginal sea.

Conservation genetics and population monitoring of the Alpine Salamander (Salamandra Atra) :

SUMMARYIn the context of the biodiversity crisis, amphibians are experiencing the most severe worldwide decline of all vertebrates and are in urgent need of better management. Efficient conservation strategies rely on sound knowledge of the species biology and of the genetic and demographic processes that might impair their welfare. Nonetheless, these processes are poorly understood in amphibians. Delineating population boundaries remains consequently problematic for these species, while it is of critical importance to define adequate management units for conservation. In this study, our attention focused on the alpine salamander (Salamandra atra), a species that deserves much interest in terms of both conservation biology and evolution. This endemic alpine species shows peculiar life-history traits (viviparity, reduced activity period, slow maturation) and has a slow population turnover, which might be problematic for its persistence in a changing environment. Due to its elusive behaviour (individuals spend most of their time underground and are unavailable for sampling), dynamic processes of gene and individuals were poorly understood for that species. Consequently, its conservation status could hardly be reliably assessed. Similarly the fire salamander (Salamandra salamandra) also poses special challenges for conservation, as no clear demarcation of geographical populations exists and dispersal patterns are poorly known. Through a phylogeographic analysis, we first studied the evolutionary history of the alpine salamander to better document the distribution of the genetic diversity along its geographical range. This study highlighted the presence of multiple divergent lineages in Italy together with a clear genetic divergence between populations from Northern and Dinaric Alps. These signs of cryptic genetic differentiation, which are not accounted for by the current taxonomy of the species, should not be neglected for further definition of conservation units. In addition, our data supported glacial survival of the species in northern peripheral glacial réfugia and nunataks, a pattern rarely documented for long-lived species. Then, we evaluated the level of gene flow between populations at the local scale and tested for asymmetries in male versus female dispersal using both field-based (mark-recapture) and genetic approaches. This study revealed high level of gene flow between populations, which stems mainly from male dispersal. This corroborated the idea that salamanders are much better dispersers than hitherto thought and provided a well- supported example of male-biased dispersal in amphibians. In a third step, based on a mark- recapture survey, we addressed the problem of sampling unavailability in alpine salamanders and evaluated its impact on two monitoring methods. We showed that about three quarters of individuals were unavailable for sampling during sampling sessions, a proportion that can vary with climatic conditions. If not taken into account, these complexities would result in false assumptions on population trends and misdirect conservation efforts. Finally, regarding the daunting task of delineating management units, our attention was drawn on the fire salamander. We conducted a local population genetic study that revealed high levels of gene flow among sampling sites. Management units for this species should consequently be large. Interestingly, despite the presence of several landscape features often reported to act as barriers, genetic breaks occurred at unexpected places. This suggests that landscape features may rather have idiosyncratic effects on population structure. In conclusion, this work brought new insights on both genetic and demographic processes occurring in salamanders. The results suggest that some biological paradigms should be taken with caution when particular species are in focus. Species- specific studies remain thus fundamental for a better understanding of species evolution and conservation, particularly in the context of current global changes.RESUMEDans le contexte de la crise de la biodiversité actuelle, les amphibiens subissent le déclin le plus important de tous les vertébrés et ont urgemment besoin d'une meilleure protection. L'établissement de stratégies de conservation efficaces repose sur des connaissances solides de la biologie des espèces et des processus génétiques et démographiques pouvant menacer leur survie. Ces processus sont néanmoins encore peu étudiés chez les amphibiens.Dans cette étude, notre attention s'est portée sur la salamandre noire (Salamandra atra), une espèce endémique des Alpes dont les traits d'histoire de vie atypiques (viviparité, phase d'activité réduite, lent turnover des populations) pourraient la rendre très vulnérable face aux changements environnementaux. Par ailleurs, en raison de son comportement cryptique (les individus passent la plupart de leur temps sous terre) la dynamique des gènes et des individus est mal comprise chez cette espèce. Il est donc difficile d'évaluer son statut de conservation de manière fiable. La salamandre tachetée {Salamandra salamandra), pour qui il n'existe aucune démarcation géographique apparente des populations, pose également des problèmes en termes de gestion. Dans un premier temps, nous avons étudié l'histoire évolutive de la salamandre noire afin de mieux décrire la distribution de sa diversité génétique au sein de son aire géographique. Cela a permis de mettre en évidence la présence de multiples lignées en Italie, ainsi qu'une nette divergence entre les populations du nord des Alpes et des Alpes dinariques. Ces résultats seront à prendre en compte lorsqu'il s'agira de définir des unités de conservation pour cette espèce. D'autre part, nos données soutiennent l'hypothèse d'une survie glaciaire dans des refuges nordiques périglaciaires ou dans des nunataks, fait rarement documenté pour une espèce longévive. Nous avons ensuite évalué la différentiation génétique des populations à l'échelle locale, ce qui a révélé d'important flux de gènes, ainsi qu'une asymétrie de dispersion en faveur des mâles. Ces résultats corroborent l'idée que les amphibiens dispersent mieux que ce que l'on pensait, et fournissent un exemple robuste de dispersion biaisée en faveur des mâles chez les amphibiens. Nous avons ensuite abordé le problème de Γ inaccessibilité des individus à la capture. Nous avons montré qu'environ trois quarts des individus sont inaccessibles lors des échantillonnages, une proportion qui peut varier en fonction des conditions climatiques. Ignoré, ce processus pourrait entraîner une mauvaise interprétation des fluctuations de populations ainsi qu'une mauvaise allocation des efforts de conservation. Concernant la définition d'unités de gestion pour la salamandre tachetée, nous avons pu mettre en évidence un flux de gènes important entre les sites échantillonnés. Les unités de gestion pour cette espèce devraient donc être étendues. Etonnamment, malgré la présence de nombreuses barrières potentielles au flux de gènes, les démarcations génétiques sont apparues à des endroits inattendus. En conclusion, ce travail a apporté une meilleure compréhension des processus génétiques et démographiques en action chez les salamandres. Les résultats suggèrent que certains paradigmes biologiques devraient être considérés avec précaution quand il s'agit de les appliquer à des espèces particulières. Les études spécifiques demeurent donc fondamentales pour une meilleure compréhension de l'évolution des espèces et leur conservation, tout particulièrement dans le contexte des changements globaux actuels.

Hydrocarbon biomarkers in the Topla-Mezica zinc-lead deposits, northern Karavanke/Drau Range, Slovenia: Paleoenvironment at the site of ore formation

The Mississippi Valley-type zinc and lead deposits at Topla (250,150 metric tons (t) of ore grading 1.0 wt % Zn and 3.3 wt % Pb) and Mezica (19 million metric tons (Mt) of ore grading 5.3 wt % Pb and 2.7 wt % Zn) occur within the Middle to Upper Triassic platform carbonate rocks of the northern Karavanke/Drau Range geotectonic units of the Eastern Alps, Slovenia. The ore and host rocks of these deposits have been investigated by a combination of inorganic and organic geochemical methods to determine major, trace, and rare earth element (REE) concentrations, hydrocarbon distribution, and stable isotope ratios of carbonates, kerogen, extractable organic matter, and individual hydrocarbons. These data combined with sedimentological evidence provide insight into the paleoenvironmental conditions at the site of ore formation. The carbonate isotope composition, the REE patterns, and the distribution of hydrocarbon biomarkers (normal alkanes and steranes) suggest a marine depositional environment. At Topla, a relatively high concentration of redox sensitive trace elements (V, Mo, U) in the host dolostones and REE patterns parallel to that of the North American shale composite suggest that sediments were deposited in a reducing environment. Anoxic conditions enhanced the preservation of organic matter and resulted in relatively higher total organic carbon contents (up to 0.4 wt %). The isotopic composition of the kerogen (delta C-13(kerogon) = -29.4 to -25.0 parts per thousand, delta N-15(kerogen) = -.13.6 to 6.8 parts per thousand) suggests that marine algae and/or bacteria were the main source of organic carbon with a very minor contribution from detrital continental plants and a varying degree of alteration. Extractable organic matter from Topla ore is generally depleted in C-13 compared to the associated kerogen, which is consistent with an indigenous source of the bitumens. The mineralization correlates with delta N-15(kerogen) values around 0 per mil, C-13 depleted kerogen, C-13 enriched n-heptadecane, and relatively high concentrations of bacteria] hydrocarbon biomarkers, indicating a high cyanobacterial biomass at the site of ore formation. Abundant dissimilatory sulfate-reducing bacteria, feeding on the cyanobacterial remains, led to accumulation of biogenic H2S in the pore water of the sediments. This biogenic H2S was mainly incorporated into sedimentary organic matter and diagenetic pyrite. Higher bacterial activity at the ore site also is indicated by specific concentration ratios of hydrocarbons, which are roughly correlated with total Pb plus Zn contents. This correlation is consistent with mixing of hydrothermal metal-rich, fluids and local bacteriogenic sulfide sulfur. The new geochemical data provide supporting evidence that Topla is a low-temperature Mississippi Valley-type deposit formed in an anoxic supratidal saline to hypersaline environment. A laminated cyanobacterial mat, with abundant sulfate-reducing bacteria was the main site of sulfate reduction.

Ethiques de la description: naissance de l'imagination typologique en France, dans le roman et la sociologie (1820-1860)

Résumé: Ce travail d'histoire comparée de la littérature et de la sociologie s'interroge sur l'émergence de la notion de type dans les pratiques de description du monde social au cours des années 1820-1860. A partir de l'analyse des opérations de schématisation engagées par Honoré Balzac dans La Comédie humaine et par Frédéric Le Play dans Les Ouvriers européens, soit deux oeuvres que tout semble éloigner du point de vue de leurs ambitions, de leur forme, et de la trajectoire de leur auteur, mais qui toutes deux placent cependant la typification au centre de leur dispositif, il s'est agi de produire une histoire de l'imagination typologique, et des ontologies, sociales ou non, qui lui furent associées. Aussi le corpus intègre-t-il des textes d'histoire naturelle, de sciences médicales, d'histoire, de chimie, de géologie, de métallurgie, et, bien évidemment, les genres du roman sentimental, du roman historique et de la littérature panoramique, ainsi que les enquêtes ouvrières et la statistique. Abstract: This work offers a compared history of literature and sociology in France between 1820 and 1860. During that period, the notion of type appears in the literary and sociological descriptions of social reality, and becomes more and more central in the apprehension of the differenciations among classes, communities or groups. Based on the analysis of Honoré Balzac's La Comédie humaine and Frédéric Le Play's Les Ouvriers européens, this study shows that these two series of novels and of workers' monographies put typification at the center of their descriptive ambition. More broadly, it proposes a history of the uses of a typological imagination and of the ontologies, above all social, that were underlying them. That is why the texts also taken into account in this study ranges from natural history, medical sciences, history, chemistry geology and metallurgy, to the sentimental novel, the historical novel and the panoramic literature, as well as social inquiries and statistics.

Analyzing complex rock slope deformation at Stampa, western Norway, by integrating geomorphology, kinematics and numerical modeling

The unstable rock slope, Stampa, above the village of Flåm, Norway, shows signs of both active and postglacial gravitational deformation over an area of 11 km2. Detailed structural field mapping, annual differential Global Navigation Satellite System (GNSS) surveys, as well as geomorphic analysis of high-resolution digital elevation models based on airborne and terrestrial laser scanning indicate that slope deformation is complex and spatially variable. Numerical modeling was used to investigate the influence of former rockslide activity and to better understand the failure mechanism. Field observations, kinematic analysis and numerical modeling indicate a strong structural control of the unstable area. Based on the integration of the above analyses, we propose that the failure mechanism is dominated by (1) a toppling component, (2) subsiding bilinear wedge failure and (3) planar sliding along the foliation at the toe of the unstable slope. Using differential GNSS, 18 points were measured annually over a period of up to 6 years. Two of these points have an average yearly movement of around 10 mm/year. They are located at the frontal cliff on almost completely detached blocks with volumes smaller than 300,000 m3. Large fractures indicate deep-seated gravitational deformation of volumes reaching several 100 million m3, but the movement rates in these areas are below 2 mm/year. Two different lobes of prehistoric rock slope failures were dated with terrestrial cosmogenic nuclides. While the northern lobe gave an average age of 4,300 years BP, the southern one resulted in two different ages (2,400 and 12,000 years BP), which represent most likely multiple rockfall events. This reflects the currently observable deformation style with unstable blocks in the northern part in between Joasete and Furekamben and no distinct blocks but a high rockfall activity around Ramnanosi in the south. With a relative susceptibility analysis it is concluded that small collapses of blocks along the frontal cliff will be more frequent. Larger collapses of free-standing blocks along the cliff with volumes > 100,000 m3, thus large enough to reach the fjord, cannot be ruled out. A larger collapse involving several million m3 is presently considered of very low likelihood.