Late Oligocene Larger Foraminifera from Nosara (Nicoya Península, Costa Rica) and Windward (Carriacou, Lesser Antilles), calibrated by 87Sr/86Sr isotope stratigraphy.

ABSTRACT: The Late Oligocene first occurrence of Miogypsina gunteri Cole and Miogypsina tani Drooger is verified in the light of larger foraminiferal assemblages from Nosara (Nicoya Peninsula, Costa Rica) and Windward (Carriacou, Grenada, Lesser Antilles). At Windward, they co-occur with planktonic foraminifera and nannofossils studied by earlier workers. 87Sr/86Sr isotope ratios were measured in calcite of larger foraminifera at both sites to determine independent absolute ages of the two outcrops. Late Oligocene shallow water formations unconformably overlie Paleocene-Eocene distal turbidites and siliceous shales in the outcrops in Costa Rica. The shallow-water lithostratigraphy includes near shore volcanic sandstones that alternate with sandy bioclastic limestones. The latter have yielded rich assemblages of larger foraminifera that have been studied in oriented sections, SEM for split material and polished rock thin sections for transmitted light and cathodoluminescence (CL) observation. The association of larger foraminifera includes Heterostegina antillea Cushman, Miogypsina tani Drooger, Miogypsina gunteri Cole, Miogypsina c.f (Miolepidocyclina) panamensis (Cushman), Miogypsina sp., Lepidocyclina (nephrolepidina) vaughani Cushman, Lepidocyclina yurnagurensis Cushman, Lepidocyclina undosa Cushman. At Windward, scattered outcrops of the Belvedere Formation expose mass flow deposits rich in larger foraminifera associated with an early late Oligocene (NP24) planktonic foraminifa assemblage. Planktonic foraminifera and nanno-fossils recovered in rocks slightly downsection indicate an upper Middle Oligocene age. Larger foraminifera species collected just north of Windward include Lepidocyclina undosa Cushman and Miogypsina gunteri Cole. The 87Sr/86Sr ratio was measured in 11 specimens of megalosphaeric Lepidocyclina spp., mechanically extracted from 2 rock samples collected at Punta Peladas (Costa Rica) Ratios range from 0.709088 to 0.708196, which correspond to a model age of 27.4 to 24.94 Ma. Very similar ratios, ranging from 0.708150 to 0.708167 were obtained from Windward Village (Carriacou). All measured 87Sr/86Sr ratios fall within a Chattian (Late Oligocene) age. Nannofossils, planktonic foraminifera and identical 87Sr/86Sr ratios from Punta Peladas and Windward clearly indicate a Chattian (Upper Oligocene) first occurrence of Miogypsina gunteri and Miogypsina tani and confirm this age range for the other larger foraminifera cited above. The first occurrence of Miogypsina gunteri in the lower Athe upper Aquitanian as proposed by European workers cannot be confirmed.

Modelling hydrodynamics in the Rio Parana, Argentina : an evaluation and inter-comparison of reduced-complexity and physics based models applied to a large sand-bed river

Depth-averaged velocities and unit discharges within a 30 km reach of one of the world's largest rivers, the Rio Parana, Argentina, were simulated using three hydrodynamic models with different process representations: a reduced complexity (RC) model that neglects most of the physics governing fluid flow, a two-dimensional model based on the shallow water equations, and a three-dimensional model based on the Reynolds-averaged Navier-Stokes equations. Row characteristics simulated using all three models were compared with data obtained by acoustic Doppler current profiler surveys at four cross sections within the study reach. This analysis demonstrates that, surprisingly, the performance of the RC model is generally equal to, and in some instances better than, that of the physics based models in terms of the statistical agreement between simulated and measured flow properties. In addition, in contrast to previous applications of RC models, the present study demonstrates that the RC model can successfully predict measured flow velocities. The strong performance of the RC model reflects, in part, the simplicity of the depth-averaged mean flow patterns within the study reach and the dominant role of channel-scale topographic features in controlling the flow dynamics. Moreover, the very low water surface slopes that typify large sand-bed rivers enable flow depths to be estimated reliably in the RC model using a simple fixed-lid planar water surface approximation. This approach overcomes a major problem encountered in the application of RC models in environments characterised by shallow flows and steep bed gradients. The RC model is four orders of magnitude faster than the physics based models when performing steady-state hydrodynamic calculations. However, the iterative nature of the RC model calculations implies a reduction in computational efficiency relative to some other RC models. A further implication of this is that, if used to simulate channel morphodynamics, the present RC model may offer only a marginal advantage in terms of computational efficiency over approaches based on the shallow water equations. These observations illustrate the trade off between model realism and efficiency that is a key consideration in RC modelling. Moreover, this outcome highlights a need to rethink the use of RC morphodynamic models in fluvial geomorphology and to move away from existing grid-based approaches, such as the popular cellular automata (CA) models, that remain essentially reductionist in nature. In the case of the world's largest sand-bed rivers, this might be achieved by implementing the RC model outlined here as one element within a hierarchical modelling framework that would enable computationally efficient simulation of the morphodynamics of large rivers over millennial time scales. (C) 2012 Elsevier B.V. All rights reserved.

Phosphorus and carbon burial during cretaceous oceanic anoxic events, links with climatic changes

According to Jenkyns (2010), oceanic anoxic events (OAE) record profound changes in the climatic and paleoceanographic state of the planet and represent major disturbances in the global carbon cycle. One of the most studied OAEs on a worldwide scale is the Cenomanian-Turonian OAE 2, which is characterized by a pronounced positive excursion in carbon-isotope records and the important accumulation of organic-rich sediments. The section at Gongzha (Tibet) and the sections at Barranca and Axaxacualco (Mexico) are located in remote parts of the Tethys, and show δ13C records, which are well correlated with those of classical Tethyan sections. Both sections, however, do not exhibit the presence of organic-rich sediments. Phosphorus Mass Accumulation Rates (PMAR) in Tibet show a pattern similar to that observed in the Tethys by Mort et al. (2007), which suggests enhanced Ρ regeneration during the OAE 2 time interval, though there is no evidence for anoxic conditions in Tibet. Ρ appears here to have been mainly driven by detrital influx and sea-level fluctuations. The sections at Barranca and Axaxacualco show that the Mexican carbonate platform persisted during this anoxic event, which allowed the evolution of platform fauna otherwise not present in Tethyan sections. The persistence of this carbonate platform close to the Caribbean Igneous Plateau, which is thought to have released bio-limiting metals, is explained by local uplift which delayed the drowning of the platform and a specific oceanic circulation that permitted the preservation of oligotrophic conditions in the area. The Coniacian-Santonian OAE (OAE3) appears to have been more dependent on local conditions than OAE2. The presence of black shales associated with OAE3 appear to have been restricted to shallow-water settings and epicontinental seas in areas located around the Atlantic Ocean. The sections at Olazagutia (Spain), and Ten Mile - Arbor Park (USA), two potential Global Boundary Stratotype Sections and Points (GSSP) sites, are devoid of organic-rich sediments and lack a δ13C positive excursion around the C-S boundary. The Gabal Ekma section (Sinai, Egypt) exhibits accumulations of organic-rich sediments, in addition to phosphorite bone beds layers, which may have been linked to an epicontinental upwelling zone and/or storm inputs. Our data suggest that OAE 3 is rarely expressed by truly anoxic conditions and seems to have been linked to local conditions rather than global paleoenvironmental change. The evidence for detrital-P being the likely cause of Ρ fluctuations during the OAEs studied here does not negate the idea that anoxia was the principal driver of these fluctuations in the western Tethys. However, an explanation is required as to why the Ρ accumulation signatures are mirrored in both oxic and anoxic sedimentary successions. 'Eustatic/climatic' and 'productivity/anoxic' models may have both operated simultaneously in different parts of the world depending on local conditions, both producing similar trends in Ρ accumulation. - Selon Jenkyns (2010), les événements anoxiques océaniques enregistrent de profonds changements dans le climat et la paléoceanographie de la planète et représente des perturbations majeures du cycle du carbone. L'un des plus étudiés à l'échelle mondiale est l'ΟΑΕ2 du Cénomanien-Turonien, qui est caractérisé par une très forte excursion positive des isotopes du carbone et une importante accumulation de sédiments riche en matière organique. La section de Gongzha (Tibet) et les sections de Barranca et Axaxcualco (Mexique) sont situées aux confins de la Téthys, et enregistrent une courbe isotopique en δ13C parfaitement corrélable avec les sections téthysiennes, mais ne montre pas d'accumulation de black shales. Le taux de phosphore en accumulation de masses (PMAR) au Tibet montre un pattern similaire observé également par Mort et al. (2007) dans la Téthys, suggérant un model de régénération du Ρ durant l'anoxie, cependant aucune conditions anoxiques régnent dans la région du Tibet. Ρ apparaît donc principalement guidé par le détritisme et les fluctuations du niveau marin. Les sections de Barranca et d'Axaxacualco montrent que la plateforme carbonatée mexicaine persiste durant cet événement anoxique, et permet le développement d'une faune de plateforme qui n'est pas présente dans les sections téthysiennes. La persistance de cette plateforme carbonatée si proche du plateau Caribéen, qui est connu pour le relâchement de métaux bio-limitant, peut être expliqué par un soulèvement tectonique local qui inhibe l'ennoiement de la plateforme et une circulation océanique spécifique qui permet la préservation de conditions oligotrophiques dans cette région. L'événement anoxique océanique du Coniacien-Santonien apparaît plus dépendant des conditions locales que pour l'ΟΑΕ2. Les black shales associés à POAE3 sont restreints aux zones situées autour de l'océan Atlantique et plus particulièrement aux eaux peu profondes et épicontinentales. Les sections d'Olazagutia (Espagne), Ten Mile Creek et Arbor Park (USA), qui sont deux potentielles sections GSSP (Sections de stratotype de limite globaux et de points), ne montre pas d'accumulation de black shales et pas de forte excursion positive en δ13C autour de la limite C-S. La section de Gabal Ekma (Sinai, Egypte) montre des accumulations de black shales, en plus des couches de phosphorites et d'accumulation d'os (« bone beds »), vraisemblablement lié à des zones active d'upwelling épicontinentale et/ou d'apport de tempêtes. Nos données suggèrent que l'OAE 3 est rarement exprimé par de vraies conditions anoxiques et semble être plus lié à des conditions plus locales que des changements paléo-environnementaux globaux, comme observés pour le Cénomanien- Turonien. Les arguments pour un modèle lié au phosphore détritique qui serait la cause des fluctuations du phosphore total durant les OAEs, n'écartent pas l'idée que l'anoxie est la principale cause de ces fluctuations dans les sections riches en matière organique de l'Ouest téthysien. Cependant une explication est nécessaire pour comprendre pourquoi la signature de l'accumulation du phosphore est semblable dans les successions sédimentaires déposées dans des conditions oxygénées et anoxiques. Les modèles « Eustatisme/Climat » et « Productivité/anoxie » ont simultanément opéré dans les différentes parties du monde dépendant de conditions locales, et ont produit des tendances similaires en accumulation de phosphore.

Palaeozoic deformation and magmatism in the northern area of the Anatolide block (Konya), witness of the Palaeotethys active margin

The study area. located north of Konva (Central Turkey), is composed of Silurian to Cretaceous metamorphosed rocks. The lower unit of the oldest formation (Silurian-Early Permian) is mostly made up of Silurian-Early Carboniferous metacarbonates. These rocks pass laterally and vertically to Devonian-Early Permian series having continental margin, shallow water and pelagic characteristics. They are intruded or juxtaposed to different kinds of metamagmatic rocks. which show MORB. continental arc and within plate characteristics. The Palaeozoic units are covered unconformably by Triassic-Cretaceous metasedimentary units. All these rocks are overthrusted by Mesozoic ophiolites. The Palaeozoic sequence can be seen as a northern Palaeotethys passive, then active margin. The northward subduction of the Palaeotethys ocean during the Carboniferous-Triassic times, induced the development of a magmatic arc and fore-arc sequence (Carboniferous-Permian). Before the Early Triassic (?Late Permian) time. the fore-arc sequence was uplifted above sea level and eroded. The Triassic sequences are regarded as marking the onset of back-arc opening and detachment of the Anatolian Konya block from the active Eurasian margin. Finally. a suture zone formed during the Carman between the Konya region and the Menderes-Tauride Cimmerian block due to the closing of Palaeotethvs. This geodynamic evolution can be correlated with the evolution of the Karaburun sequence in western Turkey.

Origin of cadmium enrichments in carbonate rocks deposited in the Alpine Tethys area during the Middle-Late Jurassic

ABSTRACTThe pollution of air, soil and water by heavy metals through anthropogenic activities is an object of numerous environmental studies since long times. A number of natural processes, such as volcanic activity, hydrothermal fluid circulation and weathering of metal-rich deposits may lead to an additional and potentially important input and accumulation of heavy metals in the environment. In the Swiss and French Jura Mountains, anomalous high cadmium (Cd) concentrations (up to 16 ppm) in certain soils are related to the presence of underlying Cd-enriched (up to 21 ppm) carbonate rocks of Middle to Late Jurassic age. The aim of this study is to understand the processes controlling Cd incorporation into carbonate rocks of Middle and Late Jurassic age and to reconstruct the sedimentary and environmental conditions, which have led to Cd enrichments in these sedimentary rocks.Cd concentrations in studied hemipelagic sections in France vary between 0.1 and 0.5 ppm (mean 0.15 ppm). Trace-element behavior and high Mn concentrations suggest that sediment accumulation occurred in a well-oxygenated environment. Increases in Cd contents in the bulk-rock carbonate sediments may be related to increases in surface-water productivity under oxic conditions and important remineralization of organic matter within the water column. In platform settings preserved in the Swiss Jura Mountains, no correlation is observed between Cd contents and evolution of environmental conditions. Cd concentrations in these platform sections are often below the detection limit, with isolated peaks of up to 21 ppm. These important Cd enrichments are associated with peaks in Zn concentrations and are present in carbonate rocks independently of facies and age. The high Cd contents in these shallow-water carbonate rocks are partly related to the presence of disseminated, Cd-rich (up to 1.8%), sphalerite (ZnS) mineralization. The basement rocks are considered to be the source of metals for sulfide mineralization in the overlying Jurassic strata, as the sphalerite Pb isotope pattern is comparable to that of granite rocks from the nearby southern Black Forest crystalline massif. The Rb-Sr ages of sphalerite samples indicate that a main phase of sphalerite formation occurred near the boundary between the late Middle and early Late Jurassic, at around 162 Ma, as a result of enhanced tectonic and hydrothermal activity in Europe, related to the opening of the Central Atlantic and to the tectonic/thermal subsidence during spreading of the Alpine Tethys. I therefore propose to use unusually high Cd concentrations in carbonates as a tracer of tectonic activity in the Jura Mountains area, especially in the case when important enrichments in Zn co-occur. Paleoproductivity reconstructions based on records of authigenic Cd may be compromised not only by post-depositional redistribution, but also by incorporation of additional Cd from hydrothermal solutions circulating in the rock.The circulation of metal-rich hydrothermal fluids through the sediment sequence, in addition to specific environmental conditions during sedimentation, contributes to the incorporation of Cd into the carbonate rocks. However, only hydrothermal activity has led to the unusually high concentrations of Cd in carbonate rocks of Bajocian-Oxfordian age, through the formation of sphalerite mineralization.

Turonian radiolarians from Karnezeika, Argolis Peninsula, Peloponnesus (Greece)

Near Karnezeika a roughly 140 m thick Upper Cretaceous section consists of interbedded pelagic limestones, cherts and coarse polymict breccias including ophiolites and shallow water limestones. At the base, pink pelagic limestones rest on deeply altered and fractured Lower Jurassic Pantokrator Limestone. This first pelagic facies is dated as middle Turonian, based on planktonic Foraminifera. Over 100 m of coarse ophiolite-carbonate breccias, interpreted as a channel or canyon fill in a pelagic environment, document the erosion of the Late Jurassic nappe edifice along the Cretaceous Pelagonian margin. Above these breccias, we mesured 16 m of principally pink and red pelagic limestones and radiolarian cherts, in which we recovered well-preserved radiolarians discussed here. In this interval, the presence of planktonic Foraminfera allows to state a late Turonian to Coniacian age. More than 40 radiolarian species are described and figured in this work. The radiolarian chronostratigraphy established by 10 different authors in 11 publications was compared for this study and used to establish radiolarian ranges. This exercise shows major discrepancies between authors for the radiolarian ranges of the studied assemblage. Nevertheless, a Turonian age can be stated based on a synthesis of cited radiolarian ranges. This age is consistent with the age based on planktonic foraminifera. In combining the ages of both Radiolaria and planktonic Foraminifera, the studied samples can be restricted to the late Turonian. However, the discrepancies of published radiolarian ranges call for an urgent, major revision of the Late Cretaceous radiolarian biochronology. The integration of planktonic foraminifera with radiolarians may greatly enhance biochronologic resolution in sections where both groups occur.

Growth and demise of Permian biogenic chert along northwest Pangea: evidence for end-Permian collapse of thermohaline circulation

The Permian Chert Event (PCE) was a 30 Ma long episode of unusual chert accumulation along the northwest margin of Pangea, and possibly worldwide. The onset of the PCE occurred at about the Sakmarian-Artinskian boundary in the Sverdrup Basin, Canadian Arctic, where it coincides with a maximum flooding event, the ending of high-frequency/high-amplitude shelf cyclicity, the onset of massive biogenic chert deposition in deep-water distal areas, and a long-term shift from warm- to cool-water carbonate sedimentation in shallow-water proximal areas. A similar and coeval shift is observed from the Barents Sea to the northwestern USA. A landward and southward expansion of silica factories occurred during the Middle and Late Permian at which time warm-water carbonate producers disappeared completely from the northwest margin of Pangea. Biotically impoverished and increasingly narrow cold-water carbonate factories (characterised by non-cemented bioclasts of sponges, bryozoans, echinoderms and brachiopods) were then progressively replaced by silica factories. By Late Permian time, little carbonate sediments accumulated in the Barents Sea and in the Sverdrup Basin. where the deep- to shallow-water sedimentary spectrum was occupied by siliceous sponge spicules. By that time, biogenic silica sedimentation was common throughout the world. Silica factories collapsed in the Late Permian, abruptly bringing the PCE to an end. In northwest Pangea, the end- Permian collapse of the PCE was associated with a major transgression and with a return to much warmer oceanic and continental climatic conditions. Chert deposition resumed in the distal oceanic areas during the early Middle Triassic (Anisian) after a 8-10 Ma interruption (Early Triassic Chert Gap). The conditions necessary for the onset, expansion and zenith of the PCE were provided by the thermohaline circulation of nutrient-rich cold waters along the northwestern and western margin of Pangea, and possibly throughout the world oceans. These conditions provided an efficient transportation mechanism that constantly replenished the supply of silica in the area, created a nutrient- and oxygen-rich environment favouring siliceous biogenic productivity. established cold sea-floor conditions, hindering silica dissolution, while increasing calcium carbonate solubility, and provided conditions adverse to organic and inorganic carbonate production, The northwest margin of Pangea was, for nearly 30 Ma. bathed by cold waters presumably derived from the seasonal melting of northern sea ice, the assumed engine for thermohaline circulation. This process started near the Sakmarian-Artinskian boundary. intensified throughout Middle and Late Permian time and ceased suddenly in latest Permian time, It led to oceanic conditions much colder than normally expected from the palaeolatitudes. and the influence of cold northerly-derived water was felt as far south southern Nevada. The demise of silica factories was caused by the rapid breakdown of these conditions and the establishment of a much warmer marine environment accompanied by sluggish circulation and perhaps a reduced input of dissolved silica to the ocean. Complete thawing of northern sea ice would have ended thermohaline circulation and led to warm and sluggish oceanic conditions inimical to the production. accumulation and preservation of biogenic silica.

Fatal Cervical Spine Injury From Diving Accident.

Spinal cord injuries result after diving into shallow water, often after incautious jumps head first into water of unknown depth during recreational or sport activities. Mortality is generally due to upper cervical trauma. The authors present a case of a diving-related death in a young woman who underwent medicolegal investigations. The measured water depth at the supposed dive site was 1.40 m. Postmortem radiology and autopsy revealed fractures of the body and the posterior arch of the fifth cervical vertebra, a fracture of the right transverse process of the sixth cervical vertebra and hemorrhages involving the cervical paraspinal muscles. Neuropathology showed a posterior epidural hematoma involving the whole cervical region and a symmetric laceration of the spinal cord located at the fourth and fifth cervical vertebra level, surrounded by multiple petechial hemorrhages. Toxicology revealed the presence of ethanol in both blood and urine samples. The death was attributed to cervical spine fracture (C5-C6), spinal cord contusion, and subsequent drowning. This case highlights the usefulness of postmortem radiology, examination of the deep structures of the neck, toxicology, neuropathology, and a detailed research of signs of drowning to formulate appropriate hypotheses pertaining to the cause and mechanism of death.

Evolution of the Helvetic shelf (Switzerland) during the Barremian-early Aptian : paleoenvironmental, paleogeographic and paleoceanographic controlling factors

The Early Cretaceous has experienced the development of large shallow-water carbonate platform in tropical and subtropical regions, favoured by exceptionally warm climatic conditions, optimal trophic conditions and a suitable tectonic and paleogeographic context. This period was also characterized by shorter intervals, in which the widespread deposition of marine sediments enriched in organic matter occurred ("oceanic anoxic episodes": OAE). This study focuses on the Barremian- Aptian interval, during which the Urgonian platform developed throughout the northern Tethyan passive margin. Due to the Alpine orogeny, sediments belonging to this platform - named locally Schrattenkalk Formation, are presently outcropping in the Helvetic Alps. This study aims to reconstruct the paleogeographic evolution of the Helvetic platform, and to define the environmental and oceanographic factors, which influenced its development. Several key episodes in the life of this platform have been identified: - The installation of the platform, covering hemipelagic sediments of the Drusberg Member, near the limit between the early and late Barremian. - The temporary change of carbonate production type during the basal Aptian, with the deposition of the Rawil Member. - And finally the definitive interruption of photozoan carbonate platform sedimentation in the study area, during the early Aptian. The sedimentological, biostratigraphical and chemostratigraphic (8I3C) data lead to the sequential subdivision of eleven sections and one core, located throughout the different Helvetic nappes of Switzerland. The sequence stratigraphie framework, initially defined for the Urgonian carbonate platform of the Vercors area (SE France), is confirmed in the Helvetic nappes, where the same number of sequences was observed. Many similarities between these two areas are put forward in this work. The sequence stratigraphie framework helped to highlight the installation of a bioclastic body, included in the Schrattenkalk Formation, since the middle Early Barremian (sequence B2). The age of the installation of the rudist-rich limestone, which corresponds to the Urgonian facies sensu stricto, is attributed to the late Barremian (maximum flooding surface of the sequence B3). This age coincides with the one determined in other northern Tethyan areas for the installation of the Urgonian platform. The results of this study show a strong tectonic control of the platform architecture, with the presence of syn-sedimentary faults in a perpendicular position to the progradation direction of the platform. The presence of these faults was highlighted by the study of the evolution of the microfacies distribution and by thickness variations in different areas. Sea level fluctuations also played an important role in the various life phases of the platform. Three major falls in sea level have been identified. A significant emersion of the proximal domain has been observed, involving an important drop of the relative sea level, leading to the exposure of the Drusberg Member hemipelagic series. A second major drop in sea level is identified near the Barremian-Aptian boundary, and a third is registered on the top of the Upper Schrattenkalk Member on the whole platform; it is associated with a karst affecting the underlying limestones to a depth of over 20 meters. This observation sheds new light on the conditions linked to the demise of Urgonian platform, which was strongly influenced by this phase of emersion.

Geochemistry of highly acidic mine water following disposal into a natural lake with carbonate bedrock

Acid mine drainage (AMD) from the Zn-Pb(-Ag-Bi-Cu) deposit of Cerro de Pasco (Central Peru) and waste water from a Cu-extraction plant has been discharged since 1981 into Lake Yanamate, a natural lake with carbonate bedrock. The lake has developed a highly acidic pH of similar to 1. Mean lake water chemistry was characterized by 16,775 mg/L acidity as CaCO(3), 4330 mg/L Fe and 29,250 mg/L SO(4). Mean trace element concentrations were 86.8 mg/L Cu, 493 mg/L Zn, 2.9 mg/L Pb and 48 mg/L As, which did not differ greatly from the discharged AMD. Most elements showed increasing concentrations from the surface to the lake bottom at a maximal depth of 41 m (e.g. from 3581 to 5433 mg/L Fe and 25,609 to 35,959 mg/L SO(4)). The variations in the H and 0 isotope compositions and the element concentrations within the upper 10 m of the water column suggest mixing with recently discharged AMD, shallow groundwater and precipitation waters. Below 15 m a stagnant zone had developed. Gypsum (saturation index, SI similar to 0.25) and anglesite (SI similar to 0.1) were in equilibrium with lake water. Jarosite was oversaturated (SI similar to 1.7) in the upper part of the water column, resulting in downward settling and re-dissolution in the lower part of the water column (SI similar to -0.7). Accordingly, jarosite was only found in sediments from less than 7 m water depth. At the lake bottom, a layer of gel-like material (similar to 90 wt.% water) of pH similar to 1 with a total organic C content of up to 4.40 wet wt.% originated from the kerosene discharge of the Cu-extraction plant and had contaminant element concentrations similar to the lake water. Below the organic layer followed a layer of gypsum with pH 1.5, which overlaid the dissolving carbonate sediments of pH 5.3-7. In these two layers the contaminant elements were enriched compared to lake water in the sequence As < Pb approximate to Cu < Cd < Zn = Mn with increasing depth. This sequence of enrichment was explained by the following processes: (i) adsorption of As on Fe-hydroxides coating plant roots at low pH (up to 3326 mg/kg As), (ii) adsorption at increasing pH near the gypsum/calcite boundary (up to 1812 mg/kg Pb, 2531 mg/kg Cu. and 36 mg/kg Cd), and (iii) precipitation of carbonates (up to 5177 mg/kg Zn and 810 mg/kg Mn: all data corrected to a wet base). The infiltration rate was approximately equal to the discharge rate, thus gypsum and hydroxide precipitation had not resulted in complete clogging of the lake bedrocks. (C) 2010 Elsevier Ltd. All rights reserved.

Effect of irrigation water and processing on the microbial quality of lettuces produced and sold on markets in Dakar (Senegal)

The aim of this survey is to assess the microbiological impact of irrigation water on lettuces produced on two urban agricultural sites and sold on markets; 6 and 7%, respectively, of lettuces coming from the sites of Pikine and Patte d'Oie were Salmonella spp. positive. Lettuces irrigated with shallow groundwater (''Ceanes'' water) were more contaminated (8% at both Pikine and Patte d'Oie sites) compared to those irrigated with wastewater (4% at Pikine) or well water (5% at Patte d'Oie). As for the lettuces in marketplaces, their contamination seems to depend on the type of treatment occurring before sale. Lettuces previously washed in the ``Ceanes'' were more contaminated than those rinsed with tap water at the marketplace. Salmonella spp. have been isolated from all marketplaces. However, the rates of contamination in markets surrounding Patte d'Oie are higher (9 and 11% at Grand Yoff and Dalifort) than those surrounding Pikine (4 and 2% at Zinc and Sham) or Rufisque, the control (2%). Our results confirm that the reuse of wastewater in irrigation is an alternative to animal manure. Its risk of microbial contamination can be significantly reduced by washing the vegetables with tap water before they are sold. Copyright (C) 2010 John Wiley & Sons, Ltd.

An experimental study on the shallow-level migmatization of ferrogabbros from the Fuerteventura Basal Complex, Canary Islands

Spectacular shallow-level migmatization of ferrogabbroic rocks occurs in a metamorphic contact aureole of a gabbroic pluton of the Tierra Mala massif (TM) on Fuerteventura (Canary Islands). In order to improve our knowledge of the low pressure melting behavior of gabbroic rocks and to constrain the conditions of migmatization of the TM gabbros, we performed partial melting experiments on a natural ferrogabbro, which is assumed as protolith of the migmatites. The experiments were performed in an internally heated pressure vessel (IHPV) at 200 MPa, 930-1150 degreesC at relatively oxidizing conditions. Distinct amounts of water were added to the charge. From 930 to 1000 degreesC, the observed experimental phases are plagioclase (An(60-70)), clinopyroxene, amphibole (titanian magnesiohastingsites), two Fe-Ti oxides, and a basaltic, K-poor melt. Above 1000 degreesC, amphibole is no longer stable. The first melts are very rich in non-native plagioclase (>70 wt.%). This indicates that at the beginning of partial melting plagioclase is the major phase which is consumed to produce melt. In the experiments, plagioclase is stable up to high temperatures (1060 degreesC) showing increasing An content with temperature. This is not compatible with the natural migmatites, in which An-rich plagioclase is absent in the melanosomes, while amphibole is stable. Our results show that the partial melting of the natural rocks cannot be regarded as an ``in-situ'' process that occurred in a closed system. Considerable amounts of alkalis probably transported by water-rich fluids, derived from the mafic pluton underplating the TM gabbro, were necessary to drive the melting reaction out of the stability range of plagioclase. A partial melting experiment with a migmatite gabbro showing typical ``in-situ'' textures as starting material supports this assumption. Crystallization experiments performed at 1000 degreesC on a glass of the fitised ferrogabbro with different water contents added to the charge show that generally high water activities could be achieved (crystallization of amphibole), independently of the bulk water content, even in a system with very low initial bulk water content (0.3 wt.%). Increasing water contents produce plagioclase richer in An, reduces the modal proportion of plagioclase in the crystallizing assemblage and extends the melt fraction. High melt fractions of >30 wt.% could only be observed in systems with high bulk water contents (> - 2 wt.%). This indicates that the migmatites were generated under water-rich conditions (probably water-saturated), since those migmatites, which are characterized as ``in-situ'' formations, show generally high amounts of leucosomes (>30 wt.%). (C) 2003 Elsevier B.V. All rights reserved.

Limits on the validity of infinite length assumptions for modelling shallow landslides

The infinite slope method is widely used as the geotechnical component of geomorphic and landscape evolution models. Its assumption that shallow landslides are infinitely long (in a downslope direction) is usually considered valid for natural landslides on the basis that they are generally long relative to their depth. However, this is rarely justified, because the critical length/depth (L/H) ratio below which edge effects become important is unknown. We establish this critical L/H ratio by benchmarking infinite slope stability predictions against finite element predictions for a set of synthetic two-dimensional slopes, assuming that the difference between the predictions is due to error in the infinite slope method. We test the infinite slope method for six different L/H ratios to find the critical ratio at which its predictions fall within 5% of those from the finite element method. We repeat these tests for 5000 synthetic slopes with a range of failure plane depths, pore water pressures, friction angles, soil cohesions, soil unit weights and slope angles characteristic of natural slopes. We find that: (1) infinite slope stability predictions are consistently too conservative for small L/H ratios; (2) the predictions always converge to within 5% of the finite element benchmarks by a L/H ratio of 25 (i.e. the infinite slope assumption is reasonable for landslides 25 times longer than they are deep); but (3) they can converge at much lower ratios depending on slope properties, particularly for low cohesion soils. The implication for catchment scale stability models is that the infinite length assumption is reasonable if their grid resolution is coarse (e.g. >25?m). However, it may also be valid even at much finer grid resolutions (e.g. 1?m), because spatial organization in the predicted pore water pressure field reduces the probability of short landslides and minimizes the risk that predicted landslides will have L/H ratios less than 25. Copyright (c) 2012 John Wiley & Sons, Ltd.

Partial melting of basic dykes in the contact aureoles of two shallow-level, gabbro-pyroxenite intrusions, Fuerteventura

THESIS ABSTRACT Low-pressure anatexis of basic dykes gave rise to unusual, zebra-like migmatites, in the contact metamorphic aureoles of two layered gabbro-pyroxenite intrusions, PXl and PX2, in the root zone of an ocean island, Fuerteventura Basal Complex (Canary Islands). This thesis focuses on the understanding of processes attributing to the partial melting and formation of these migmatites, characterised by a dense network of closely spaced, millimetre-wide leucocratic segregations with perfectly preserved igneous textures. The presence of fluids are required to decrease the solidus of basic igneous lithologies, to allow partial melting in such aloes-pressure (1-2 kb) environment. An oxygen isotope study was thus carried out on dykes inside and beyond the PX2 aureole, in order to decipher the nature and origin of such fluids. Low or negative δ18O values were obtained for whole rocks and mineral-separates, decreasing towards the contact, with the intrusion itself retaining fairly high values. This trend has been attributed to the advection of meteoric water during magma emplacement, with increasing fluid/rock ratios (higher dyke intensities towards the intrusion acting as fluid-pathways) and higher temperatures promoting increasing exchange during recrystallisation. A comparison of whole rock and mineral major- and trace- element data allowed the redistribution of elements .between different mineral phases and generations, during contact metamorphism and partial melting to be assessed. Certain trace-elements, e.g. Zr, Hf, Y, and REEs, were internally redistributed during contact metamorphic recrystallisation, causing- the enrichment of neocrystallised diopsides compared to relict phenocrysts. This has been assigned to the liberation of trace elements on the breakdown of primary minerals, kaersutite and sphene, on entering the thermal aureole. Major and trace element compositions of minerals in migmatite melanosomes and leucosomes are almost identical, pointing to a syn- or post- solidus reequilibration on cooling of the migmatite terrain. The mineralogical, textural and geochemical evolution of dykes in a contact metamorphic aureole, is recorded around an apophysis of the PX1 intrusion, where there is evidence of incipient partial melting. Hydrothermal mineral pseudomorphs in the outer parts of the aureole are progressively replaced by dry mineral assemblages, with increasingly recrystallised diopside and evidence of partial melting -the extent of which varies from one lithology to another. The appearance of more mafic lithologies towards the intrusion, with lower whole rock SiO2 and mobile element abundances, e.g. Rb, Cs, K, has been explained by the migration and accumulation of feldspathic material into leucosomes outside the samples. A micro-structural study of leucosomes and leucocratic pods, with the aid of high-resolution X-ray computed micro-tomography (HRXµCT), allowing the visualization and quantification of shapes and orientations, was carried out in order to better understand the processes of melt segregation in the PX1 aureole. Leucocratic pods, representing former amygdales, are considered as natural strain ellipsoids. Their short axes are oriented perpendicular to leucosome planes, which sub-parallel the intrusive contact. Leucosomes thus effectively represent foliation planes. This implies that the direction of maximum shortening, during migmatisation, was perpendicular to the orientation of leucosomes, contradicting earlier models that suggest leucosomes represent tension veins. RESUME DE LA THESE Un phénomène rare de fusion partielle de filons basiques à basse pression a été étudié dans les auréoles de contact de deux intrusions litées de gabbro-pyroxénite, PX1 et PX2, localisées dans le soubassement de l'île volcanique de Fuerteventura aux Canaries. Cette anatexie a engendré des migmatites finement zébrées d'aspect très inhabituel, dont les processus de formation ont été étudiés dans le présent travail. Ces roches sont caractérisées par un réseau dense de veinules leucocrates d'épaisseur millimétrique, dont les textures ignées sont parfaitement préservées. La fusion partielle de roches basiques à basse pression (1-2 kbar) requiert la présence d'eau afin d'abaisser le solidus du système à des températures géologiquement réalistes. Une étude comparative des isotopes de l'oxygène a ainsi été menée sur des filons respectivement affectés et non affectés par le métamorphisme de contact, afin de confirmer la présence de ces fluides, de déterminer l'importance de leur interaction avec les roches et leur origine. Des valeurs de δ180 basses ou négatives ont été mesurées sur roche totale et minéraux séparés, décroissantes en direction du contact, alors que l'intrusion elle-même a conservé des valeurs élevées. Ce gradient a été attribué à l'advection d'eau météorique durant la mise en place du magma, les températures les plus élevées favorisant d'autant plus la circulation des fluides et les échanges isotopiques durant la recristallisation des roches. Cette recristallisation engendré une redistribution chimique complète des éléments entre les différentes générations de minéraux résultant du métamorphisme de contact et de l'anatexie, mise en évidence par microanalyse. Certains éléments traces comme Zr, Hf, Y et les REE ont été concentrés dans le diopside néoformé consécutivement à la déstabilisation de minéraux primaires riches en ces éléments comme la kaersutite ou le sphène. Les compositions en éléments majeurs et traces des minéraux des mélanosomes et leucosomes des migmatites sont pratiquement identiques, indiquant une rééquilibration syn- à postsolidus lors du refroidissement de l'auréole de contact. La transformation progressive des filons basiques au niveau de leur minéralogie, textures et composition chimique a pu être observée en détail à l'approche du contact d'une apophyse de l'intrusion PX1. La paragenèse magmatique initiale n'est jamais préservée, les faciès les plus distants du contact étant constitués d'un assemblage pseudomorphique hydrothermal. Ce dernier est progressivement remplacé par des assemblages anhydres incluant du diopside néoformé, puis apparaissent les premiers signes de fusion partielle, dont l'importance varie fortement d'une lithologie à l'autre. L'apparition de faciès plus basiques en direction du contact, avec des teneurs réduites en SiO2 et en éléments incompatibles tels Rb, Cs, K, a été attribuée à l'échappement de leucosomes feldspathiques hors du système. Une étude microstructurale de la distribution spatiale du matériel leucocrate au sein des migmatites par microtomographie X de haute résolution (HRXµCT) a été menée pour mieux comprendre les processus de ségrégation des liquides dans l'auréole de PX1. De petites entités ovoïdes, représentant d'anciennes structures amygdalaires au sein des filons, ont été considérées comme des ellipsoïdes marqueurs de la déformation finie. Leur petit axe est orienté perpendiculairement aux plans définis par les leucosomes, eux-mêmes subparallèles au contact intrusif. Les leucosomes matérialisent donc des plans de clivage. Ainsi, la direction de raccourcissement maximum durant la fusion partielle était perpendiculaire à l'orientation des leucosomes, contrairement à ce qui a été dit dans de précédentes publications, qui suggéraient que les leucosomes représentaient des veines de tension. RESUME DE LA THESE (POUR LE GRAND PUBLIC) L'observation directe du soubassement d'une île volcanique est une occasion rare, accessible dans le «complexe de base » de l'île canarienne de Fuerteventura. Ce dernier a enregistré divers phénomènes magmatiques, métamorphiques et de fusion partielle induits par l'intrusion répétée de magmas alimentant des appareils volcaniques sus jacents, sous forme de petits plutons, essaims de filons et complexes annulaires de gabbros alcalins, pyroxénites, syénites et carbonatites. Dans ce contexte de flux de chaleur élevé, des filons basiques ont subi une fusion partielle au contact de deux intrusions de gabbro-pyroxénite, un phénomène extrêmement rare à une profondeur aussi réduite, estimée à quelque 3-6 km. Les produits de cette fusion partielle sont des liquides très riches en feldspath, concentrés en un réseau dense de veinules blanches (leucosomes) au sein du matériau résiduel sombre non fondu (mélanosome) pour former ce qu'on appelle des migmatites. Outre les aspects pétrologiques liés à la formation de ces migmatites, l'intérêt majeur du phénomène réside dans le fait qu'il puisse représenter la source des magmas évolués parfois observés sur les îles océaniques. A des pressions aussi faibles que dans le soubassement de Fuerteventura (1-2 Kbar), la présence de fluides abondants est nécessaire pour abaisser la température de début de fusion des roches (solidus) à des valeurs géologiquement réalistes. Des expériences ont montré que même en présence de plusieurs %-poids d'eau, une température de 1000°C était encore nécessaire pour obtenir une proportion de liquide équivalente à celle observée sur le terrain, soit 25%. Or les magmas alcalins des îles océaniques, bien qu'hydratés, n'en contiennent de loin pas autant, ce qui implique une source d'eau externe. Une étude isotopique de l'oxygène a été entreprise afin de tester cette hypothèse. Les valeurs obtenues en 5180 sont basses ou négatives et indiquent l'influence d'eau d'origine météorique. Cette eau de pluie se serait infiltrée le long des filons depuis la surface du volcan et les aurait complètement hydrothermalisés en profondeur (situation encore visible à l'extérieur de l'auréole de contact), leur permettant ainsi de stocker l'eau nécessaire à leur fusion partielle ultérieure. L'interaction entre eau de pluie et filons a été d'autant plus importante que ces derniers étaient proches du contact avec l'intrusion, ce qui suggère que la circulation de ces eaux et leur interaction avec les roches a été favorisée par la chaleur fournie par l'intrusion elle-même. Un autre aspect de ce travail s'est focalisé sur la redistribution des éléments traces au sein des minéraux des filons basiques durant le métamorphisme de contact et la fusion partielle. Ainsi, le pyroxène de seconde génération est-il sensiblement enrichi en traces telles Zr, Hf, Y et les terres rares, par rapport au pyroxène magmatique originel, en relation avec la déstabilisation de minéraux primaires riches en ces éléments tels le sphène et la kaersutite. Cependant, les compositions en éléments majeurs et traces des minéraux recristallisés des migmatites sont pratiquement les mêmes dans les leucosomes et les mélanosomes, suggérant une rééquilibration chimique complète durant le refroidissement de ces lithologies. Si certaines migmatites se sont comportées en système chimiquement fermé (hormis l'eau météorique), d'autres filons ont manifestement perdu une partie de leurs leucosomes, ainsi qu'en témoigne leur composition progressivement appauvrie en silice et autres éléments incompatibles mobiles, tels K et Rb à l'approche du contact de l'intrusion. Parallèlement à cette évolution chimique, les paragenèses hydrothermales distantes du contact sont progressivement remplacées par des paragenèses anhydres, puis par l'apparition des premiers leucosomes, tandis que les textures magmatiques initiales sont complètement effacées au profit d'une combinaison de textures magmatique dans les leucosomes et en mosaïque dans les mélanosomes. Enfin, la distribution spatiale des liquides de fusion partielle a été étudiée par microtomographie X de haute résolution, dans des filons contenant des entités ovoïdes leucocrates, sans doute d'anciennes amygdales à zéolites. Ces dernières ont été considérées comme des ellipsoïdes de la déformation finie. L'orientation de leur petit axe, perpendiculaire au plan défini par les veinules de leucosomes, indique que ces derniers représentent des plans de clivage perpendiculaires à la direction de raccourcissement maximum. Ainsi, la ségrégation des liquides de fusion partielle se serait faite dans les plans de compression et non dans des plans de dilatation, contrairement à ce que laisserait penser le sens commun.

Shallow-platform palaeoenvironmental conditions recorded in deep-shelf sediments: C and stable isotopes in Upper Jurassic sections of southern Germany (Oxfordian-Kimmeridgian)

A high-resolution carbon and oxygen isotope analysis of Late Oxfordian-Early Kimmeridgian deep-shelf sediments of southern Germany is combined with investigation of nannofossil assemblage composition and sedimentological interpretations in order to evaluate the impact of regional palaeoenvironmental conditions on isotopic composition of carbonates. This study suggests that carbonate mud was essentially derived from the Jura shallow platform environments and also that the isotopic signature of carbonates deposited in the Swabian Alb deep shelf indirectly expresses the palaeoenvironmental evolution of the platform. Short-term fluctuations in delta(13) C and delta(18)O are probably controlled by changes in salinity (fresh-water input versus evaporation) in platform environments. Long-term fluctuations in carbon and oxygen isotope record throughout the Late Oxfordian-Early Kimmeridgian result from the interplay of increasing temperature and decreasing humidity, which both control the trophic level. Changes from mesotrophic to oligotrophic conditions in platform environments and in the deep-shelf surface waters are inferred. During the Late Oxfordian (Bimammatum Subzone to Planula Zone), the delta(13)C curve displays a positive shift of about 1 parts per thousand, which is comparable in intensity to global perturbations of the carbon cycle. This evident isotopic shift has not been documented yet in other basinal settings. It can be reasonably explained by local palaeoenvironmental changes on the Jura platform (salinity, temperature, and nutrient availability) that controlled platform carbonate production, and the geochemistry of overlying waters. However, increasing carbonate production on the Jura platform and related positive delta(13)C shifts recorded in the Swabian Alb deep shelf are the regional signatures of climatic changes affecting other palaeogeographical domains of Europe in which the carbonate production increased throughout the Late Oxfordian. (C) 2002 Elsevier Science B.V. All rights reserved.