Analysis and spatial modeling of the indoor radon Swiss data

The present research deals with an important public health threat, which is the pollution created by radon gas accumulation inside dwellings. The spatial modeling of indoor radon in Switzerland is particularly complex and challenging because of many influencing factors that should be taken into account. Indoor radon data analysis must be addressed from both a statistical and a spatial point of view. As a multivariate process, it was important at first to define the influence of each factor. In particular, it was important to define the influence of geology as being closely associated to indoor radon. This association was indeed observed for the Swiss data but not probed to be the sole determinant for the spatial modeling. The statistical analysis of data, both at univariate and multivariate level, was followed by an exploratory spatial analysis. Many tools proposed in the literature were tested and adapted, including fractality, declustering and moving windows methods. The use of Quan-tité Morisita Index (QMI) as a procedure to evaluate data clustering in function of the radon level was proposed. The existing methods of declustering were revised and applied in an attempt to approach the global histogram parameters. The exploratory phase comes along with the definition of multiple scales of interest for indoor radon mapping in Switzerland. The analysis was done with a top-to-down resolution approach, from regional to local lev¬els in order to find the appropriate scales for modeling. In this sense, data partition was optimized in order to cope with stationary conditions of geostatistical models. Common methods of spatial modeling such as Κ Nearest Neighbors (KNN), variography and General Regression Neural Networks (GRNN) were proposed as exploratory tools. In the following section, different spatial interpolation methods were applied for a par-ticular dataset. A bottom to top method complexity approach was adopted and the results were analyzed together in order to find common definitions of continuity and neighborhood parameters. Additionally, a data filter based on cross-validation was tested with the purpose of reducing noise at local scale (the CVMF). At the end of the chapter, a series of test for data consistency and methods robustness were performed. This lead to conclude about the importance of data splitting and the limitation of generalization methods for reproducing statistical distributions. The last section was dedicated to modeling methods with probabilistic interpretations. Data transformation and simulations thus allowed the use of multigaussian models and helped take the indoor radon pollution data uncertainty into consideration. The catego-rization transform was presented as a solution for extreme values modeling through clas-sification. Simulation scenarios were proposed, including an alternative proposal for the reproduction of the global histogram based on the sampling domain. The sequential Gaussian simulation (SGS) was presented as the method giving the most complete information, while classification performed in a more robust way. An error measure was defined in relation to the decision function for data classification hardening. Within the classification methods, probabilistic neural networks (PNN) show to be better adapted for modeling of high threshold categorization and for automation. Support vector machines (SVM) on the contrary performed well under balanced category conditions. In general, it was concluded that a particular prediction or estimation method is not better under all conditions of scale and neighborhood definitions. Simulations should be the basis, while other methods can provide complementary information to accomplish an efficient indoor radon decision making.

Relationship of physical activity with motor skills, aerobic fitness and body fat in preschool children: a cross-sectional and longitudinal study (Ballabeina).

Adiposity, low aerobic fitness and low levels of activity are all associated with clustered cardiovascular disease risk in children and their high prevalence represents a major public health concern. The aim of this study is to investigate the relationship of objectively measured physical activity (PA) with motor skills (agility and balance), aerobic fitness and %body fat in young children. This study is a cross-sectional and longitudinal analyses using mixed linear models. Longitudinal data were adjusted for baseline outcome parameters. In all, 217 healthy preschool children (age 4-6 years, 48% boys) participated in this study. PA (accelerometers), agility (obstacle course), dynamic balance (balance beam), aerobic fitness (20-m shuttle run) and %body fat (bioelectric impedance) at baseline and 9 months later. PA was positively associated with both motor skills and aerobic fitness at baseline as well as with their longitudinal changes. Specifically, only vigorous, but not total or moderate PA, was related to changes in aerobic fitness. Higher PA was associated with less %body fat at baseline, but not with its change. Conversely, baseline motor skills, aerobic fitness or %body fat were not related to changes in PA. In young children, baseline PA was associated with improvements in motor skills and in aerobic fitness, an important determinant of cardiovascular risk.

Design and analysis of ChIP-Seq experiments for nuclear factor I DNA-binding proteins

SUMMARY : Eukaryotic DNA interacts with the nuclear proteins using non-covalent ionic interactions. Proteins can recognize specific nucleotide sequences based on the sterical interactions with the DNA and these specific protein-DNA interactions are the basis for many nuclear processes, e.g. gene transcription, chromosomal replication, and recombination. New technology termed ChIP-Seq has been recently developed for the analysis of protein-DNA interactions on a whole genome scale and it is based on immunoprecipitation of chromatin and high-throughput DNA sequencing procedure. ChIP-Seq is a novel technique with a great potential to replace older techniques for mapping of protein-DNA interactions. In this thesis, we bring some new insights into the ChIP-Seq data analysis. First, we point out to some common and so far unknown artifacts of the method. Sequence tag distribution in the genome does not follow uniform distribution and we have found extreme hot-spots of tag accumulation over specific loci in the human and mouse genomes. These artifactual sequence tags accumulations will create false peaks in every ChIP-Seq dataset and we propose different filtering methods to reduce the number of false positives. Next, we propose random sampling as a powerful analytical tool in the ChIP-Seq data analysis that could be used to infer biological knowledge from the massive ChIP-Seq datasets. We created unbiased random sampling algorithm and we used this methodology to reveal some of the important biological properties of Nuclear Factor I DNA binding proteins. Finally, by analyzing the ChIP-Seq data in detail, we revealed that Nuclear Factor I transcription factors mainly act as activators of transcription, and that they are associated with specific chromatin modifications that are markers of open chromatin. We speculate that NFI factors only interact with the DNA wrapped around the nucleosome. We also found multiple loci that indicate possible chromatin barrier activity of NFI proteins, which could suggest the use of NFI binding sequences as chromatin insulators in biotechnology applications. RESUME : L'ADN des eucaryotes interagit avec les protéines nucléaires par des interactions noncovalentes ioniques. Les protéines peuvent reconnaître les séquences nucléotidiques spécifiques basées sur l'interaction stérique avec l'ADN, et des interactions spécifiques contrôlent de nombreux processus nucléaire, p.ex. transcription du gène, la réplication chromosomique, et la recombinaison. Une nouvelle technologie appelée ChIP-Seq a été récemment développée pour l'analyse des interactions protéine-ADN à l'échelle du génome entier et cette approche est basée sur l'immuno-précipitation de la chromatine et sur la procédure de séquençage de l'ADN à haut débit. La nouvelle approche ChIP-Seq a donc un fort potentiel pour remplacer les anciennes techniques de cartographie des interactions protéine-ADN. Dans cette thèse, nous apportons de nouvelles perspectives dans l'analyse des données ChIP-Seq. Tout d'abord, nous avons identifié des artefacts très communs associés à cette méthode qui étaient jusqu'à présent insoupçonnés. La distribution des séquences dans le génome ne suit pas une distribution uniforme et nous avons constaté des positions extrêmes d'accumulation de séquence à des régions spécifiques, des génomes humains et de la souris. Ces accumulations des séquences artéfactuelles créera de faux pics dans toutes les données ChIP-Seq, et nous proposons différentes méthodes de filtrage pour réduire le nombre de faux positifs. Ensuite, nous proposons un nouvel échantillonnage aléatoire comme un outil puissant d'analyse des données ChIP-Seq, ce qui pourraient augmenter l'acquisition de connaissances biologiques à partir des données ChIP-Seq. Nous avons créé un algorithme d'échantillonnage aléatoire et nous avons utilisé cette méthode pour révéler certaines des propriétés biologiques importantes de protéines liant à l'ADN nommés Facteur Nucléaire I (NFI). Enfin, en analysant en détail les données de ChIP-Seq pour la famille de facteurs de transcription nommés Facteur Nucléaire I, nous avons révélé que ces protéines agissent principalement comme des activateurs de transcription, et qu'elles sont associées à des modifications de la chromatine spécifiques qui sont des marqueurs de la chromatine ouverte. Nous pensons que lés facteurs NFI interagir uniquement avec l'ADN enroulé autour du nucléosome. Nous avons également constaté plusieurs régions génomiques qui indiquent une éventuelle activité de barrière chromatinienne des protéines NFI, ce qui pourrait suggérer l'utilisation de séquences de liaison NFI comme séquences isolatrices dans des applications de la biotechnologie.

Dimensionality of drinking consequences - cross-cultural comparability and stability over time

Despite the long tradition for asking about the negative social and health consequences of alcohol consumption in surveys, little is known about the dimensionality of these consequences. Analysing cross-sectional and longitudinal data from the Nordic Taxation Study collected for Sweden, Finland, and Denmark in two waves in 2003 and 2004 by means of an explorative principal component analysis for categorical data (CATPCA), it is tested whether consequences have a single underlying dimension across cultures. It further tests the reliability, replicability, concurrent and predictive validity of the consequence scales. A one-dimensional solution was commonly preferable. Whereas the two-dimensional solution was unable to distinguish clearly between different concepts of consequences, the one-dimensional solution resulted in interpretable, generally very stable scales within countries across different samples and time.

Age-related normograms of serum antimüllerian hormone levels in a population of infertile women: a multicenter study.

Objective: To produce age-related normograms for serum antimullerian hormone (AMH) level in infertile women without polycystic ovaries (non-PCO).Design: Retrospective cohort analysis.Setting: Fifteen academic reproductive centers.Patient(s): A total of 3,871 infertile women.Intervention(s): Blood sampling for AMH level.Main Outcome Measure(s): Serum AMH levels and correlation between age and different percentiles of AMH.Result(s): Age-related normograms for the 3rd, 10th, 25th, 50th, 75th, 90th, and 97th percentiles of AMH were produced. We found that the curves of AMH by age for the 3rd to 50th percentiles fit the model and appearance of linear relation, whereas the curves of >75th percentiles fit cubic relation. There were significant differences in AMH and FSH levels and in antral follicle count (AFC) among women aged 24-33 years, 34-38 years, and >= 39 years. Multivariate stepwise linear regression analysis of FSH, age, AFC, and the type of AMH kit as predictors of AMH level shows that all variables are independently associated with AMH level, in the following order: AFC, FSH, type of AMH kit, and age.Conclusion(s): Age-related normograms in non-PCO infertile women for the 3rd to 97th percentiles were produced. These normograms could provide a reference guide for the clinician to consult women with infertility. However, future validation with longitudinal data is still needed. (Fertil Steril (R) 2011; 95: 2359-63. (C) 2011 by American Society for Reproductive Medicine.)

Turnaround across diverse global supply chains using shared metrics and change methodology: The Case of Amer Sports Corporation

Purpose - The purpose of this paper is to document the outcome of a global three-year long supply chain improvement initiative at a multi-national producer of branded sporting goods that is transforming from a holding structure to an integrated company. The case company is comprised of seven internationally well-known sport brands, which form a diverse set of independent sub-cases, on which the same supply chain metrics and change project approach was applied to improve supply chain performance. Design/methodology/approach - By using in-depth case study and statistical analysis the paper analyzes across the brands how supply chain complexity (SKU count), supply chain type (make or buy) and seasonality affect completeness and punctuality of deliveries, and inventory as the change project progresses. Findings - Results show that reduction in supply chain complexity improves delivery performance, but has no impact on inventory. Supply chain type has no impact on service level, but brands with in-house production are better in improving inventory than those with outsourced production. Non-seasonal business units improve service faster than seasonal ones, yet there is no impact on inventory. Research limitations/implications - The longitudinal data used for the analysis is biased with the general business trend, yet the rich data from different cases and three-years of data collection enables generalizations to a certain level. Practical implications - The in-depth case study serves as an example for other companies on how to initiate a supply chain improvement project across business units with tangible results. Originality/value - The seven sub-cases with their different characteristics on which the same improvement initiative was applied sets a unique ground for longitudinal analysis to study supply chain complexity, type and seasonality.

Machine learning algorithms for spatial data. Case studies: Environmental pollution, natural hazards, renewable resources

This paper presents general problems and approaches for the spatial data analysis using machine learning algorithms. Machine learning is a very powerful approach to adaptive data analysis, modelling and visualisation. The key feature of the machine learning algorithms is that they learn from empirical data and can be used in cases when the modelled environmental phenomena are hidden, nonlinear, noisy and highly variable in space and in time. Most of the machines learning algorithms are universal and adaptive modelling tools developed to solve basic problems of learning from data: classification/pattern recognition, regression/mapping and probability density modelling. In the present report some of the widely used machine learning algorithms, namely artificial neural networks (ANN) of different architectures and Support Vector Machines (SVM), are adapted to the problems of the analysis and modelling of geo-spatial data. Machine learning algorithms have an important advantage over traditional models of spatial statistics when problems are considered in a high dimensional geo-feature spaces, when the dimension of space exceeds 5. Such features are usually generated, for example, from digital elevation models, remote sensing images, etc. An important extension of models concerns considering of real space constrains like geomorphology, networks, and other natural structures. Recent developments in semi-supervised learning can improve modelling of environmental phenomena taking into account on geo-manifolds. An important part of the study deals with the analysis of relevant variables and models' inputs. This problem is approached by using different feature selection/feature extraction nonlinear tools. To demonstrate the application of machine learning algorithms several interesting case studies are considered: digital soil mapping using SVM, automatic mapping of soil and water system pollution using ANN; natural hazards risk analysis (avalanches, landslides), assessments of renewable resources (wind fields) with SVM and ANN models, etc. The dimensionality of spaces considered varies from 2 to more than 30. Figures 1, 2, 3 demonstrate some results of the studies and their outputs. Finally, the results of environmental mapping are discussed and compared with traditional models of geostatistics.

Assessing the Relationship between the Baseline Value of a Continuous Variable and Subsequent Change over Time

Analyzing the relationship between the baseline value and subsequent change of a continuous variable is a frequent matter of inquiry in cohort studies. These analyses are surprisingly complex, particularly if only two waves of data are available. It is unclear for non-biostatisticians where the complexity of this analysis lies and which statistical method is adequate.With the help of simulated longitudinal data of body mass index in children,we review statistical methods for the analysis of the association between the baseline value and subsequent change, assuming linear growth with time. Key issues in such analyses are mathematical coupling, measurement error, variability of change between individuals, and regression to the mean. Ideally, it is better to rely on multiple repeated measurements at different times and a linear random effects model is a standard approach if more than two waves of data are available. If only two waves of data are available, our simulations show that Blomqvist's method - which consists in adjusting for measurement error variance the estimated regression coefficient of observed change on baseline value - provides accurate estimates. The adequacy of the methods to assess the relationship between the baseline value and subsequent change depends on the number of data waves, the availability of information on measurement error, and the variability of change between individuals.

Structural components in functional data

Analyzing functional data often leads to finding common factors, for which functional principal component analysis proves to be a useful tool to summarize and characterize the random variation in a function space. The representation in terms of eigenfunctions is optimal in the sense of L-2 approximation. However, the eigenfunctions are not always directed towards an interesting and interpretable direction in the context of functional data and thus could obscure the underlying structure. To overcome such difficulty, an alternative to functional principal component analysis is proposed that produces directed components which may be more informative and easier to interpret. These structural components are similar to principal components, but are adapted to situations in which the domain of the function may be decomposed into disjoint intervals such that there is effectively independence between intervals and positive correlation within intervals. The approach is demonstrated with synthetic examples as well as real data. Properties for special cases are also studied.

The Life Course Determinants of Vulnerability in Late Careers

Late career is often seen as a more vulnerable life-stage in the labour market, in which workers may experience a deterioration in job quality. Using a life course perspective and longitudinal data, this article analyses the vulnerability associated with late career by focusing on four occupational dimensions: working-time, career continuity, retirement timing and income change. The research is carried out using data from Switzerland, a country where the age profile of the labour force is an increasing issue. The paper also adopts a cumulative disadvantage perspective to examine the impact of previous work and family life experiences on work life vulnerability at older age. Our data come from the Survey of Health, Ageing and Retirement in Europe (SHARELIFE). The paper uses cluster analysis, sequence analysis and ordered logistic regression. Results show that women with previous family responsibilities resulting in long-term unemployment or caring, often with health complications, are more likely to be vulnerable to deterioration in job quality in late career. This suggests that experiences in the last period of the working life may be just as gendered as earlier periods.

Computational anatomy for studying use-dependant brain plasticity.

In this article we provide a comprehensive literature review on the in vivo assessment of use-dependant brain structure changes in humans using magnetic resonance imaging (MRI) and computational anatomy. We highlight the recent findings in this field that allow the uncovering of the basic principles behind brain plasticity in light of the existing theoretical models at various scales of observation. Given the current lack of in-depth understanding of the neurobiological basis of brain structure changes we emphasize the necessity of a paradigm shift in the investigation and interpretation of use-dependent brain plasticity. Novel quantitative MRI acquisition techniques provide access to brain tissue microstructural properties (e.g., myelin, iron, and water content) in-vivo, thereby allowing unprecedented specific insights into the mechanisms underlying brain plasticity. These quantitative MRI techniques require novel methods for image processing and analysis of longitudinal data allowing for straightforward interpretation and causality inferences.

Italy's Path to Very Low Fertility : The Adequacy of Economic and Second Demographic Transition Theories

The deep drop of the fertility rate in Italy to among the lowest in the world challenges contemporary theories of childbearing and family building. Among high-income countries, Italy was presumed to have characteristics of family values and female labor force participation that would favor higher fertility than its European neighbors to the north. We test competing economic and cultural explanations, drawing on new nationally representative, longitudinal data to examine first union, first birth, and second birth. Our event history analysis finds some support for economic determinants of family formation and fertility, but the clear importance of regional differences and of secularization suggests that such an explanation is at best incomplete and that cultural and ideational factors must be considered.

Marijuana use, diet, body mass index, and cardiovascular risk factors (from the CARDIA study).

Marijuana use has been associated with increased appetite, high caloric diet, acute increase in blood pressure, and decreases in high-density lipoprotein cholesterol and triglycerides. Marijuana is the most commonly used illicit drug in the United States, but its long-term effects on body mass index (BMI) and cardiovascular risk factors are unknown. Using 15 years of longitudinal data from 3,617 black and white young adults participating in the Coronary Artery Risk Development in Young Adults (CARDIA) study, we assessed whether marijuana use was associated with caloric intake, BMI, and cardiovascular risk factors. Of the 3,617 participants, 1,365 (38%) reported ever using marijuana. Marijuana use was associated with male gender, tobacco smoking, and other illicit drug use. More extensive marijuana use was associated with a higher caloric intake (2,746 kcal/day in never users to 3,365 kcal/day in those who used marijuana for > or = 1,800 days over 15 years) and alcohol intake (3.6 to 10.8 drinks/week), systolic blood pressure (112.7 to 116.5 mm Hg), and triglyceride levels (84 to 100 mg/dl or 0.95 to 1.13 mmol/L, all p values for trend < 0.001), but not with higher BMI and lipid and glucose levels. In multivariate analysis, the associations between marijuana use and systolic blood pressure and triglycerides disappeared, having been mainly confounded by greater alcohol use in marijuana users. In conclusion, although marijuana use was not independently associated with cardiovascular risk factors, it was associated with other unhealthy behaviors, such as high caloric diet, tobacco smoking, and other illicit drug use, which all have long-term detrimental effects on health.

Rules of origin : from analysis to reform

General Introduction This thesis can be divided into two main parts :the first one, corresponding to the first three chapters, studies Rules of Origin (RoOs) in Preferential Trade Agreements (PTAs); the second part -the fourth chapter- is concerned with Anti-Dumping (AD) measures. Despite wide-ranging preferential access granted to developing countries by industrial ones under North-South Trade Agreements -whether reciprocal, like the Europe Agreements (EAs) or NAFTA, or not, such as the GSP, AGOA, or EBA-, it has been claimed that the benefits from improved market access keep falling short of the full potential benefits. RoOs are largely regarded as a primary cause of the under-utilization of improved market access of PTAs. RoOs are the rules that determine the eligibility of goods to preferential treatment. Their economic justification is to prevent trade deflection, i.e. to prevent non-preferred exporters from using the tariff preferences. However, they are complex, cost raising and cumbersome, and can be manipulated by organised special interest groups. As a result, RoOs can restrain trade beyond what it is needed to prevent trade deflection and hence restrict market access in a statistically significant and quantitatively large proportion. Part l In order to further our understanding of the effects of RoOs in PTAs, the first chapter, written with Pr. Olivier Cadot, Celine Carrère and Pr. Jaime de Melo, describes and evaluates the RoOs governing EU and US PTAs. It draws on utilization-rate data for Mexican exports to the US in 2001 and on similar data for ACP exports to the EU in 2002. The paper makes two contributions. First, we construct an R-index of restrictiveness of RoOs along the lines first proposed by Estevadeordal (2000) for NAFTA, modifying it and extending it for the EU's single-list (SL). This synthetic R-index is then used to compare Roos under NAFTA and PANEURO. The two main findings of the chapter are as follows. First, it shows, in the case of PANEURO, that the R-index is useful to summarize how countries are differently affected by the same set of RoOs because of their different export baskets to the EU. Second, it is shown that the Rindex is a relatively reliable statistic in the sense that, subject to caveats, after controlling for the extent of tariff preference at the tariff-line level, it accounts for differences in utilization rates at the tariff line level. Finally, together with utilization rates, the index can be used to estimate total compliance costs of RoOs. The second chapter proposes a reform of preferential Roos with the aim of making them more transparent and less discriminatory. Such a reform would make preferential blocs more "cross-compatible" and would therefore facilitate cumulation. It would also contribute to move regionalism toward more openness and hence to make it more compatible with the multilateral trading system. It focuses on NAFTA, one of the most restrictive FTAs (see Estevadeordal and Suominen 2006), and proposes a way forward that is close in spirit to what the EU Commission is considering for the PANEURO system. In a nutshell, the idea is to replace the current array of RoOs by a single instrument- Maximum Foreign Content (MFC). An MFC is a conceptually clear and transparent instrument, like a tariff. Therefore changing all instruments into an MFC would bring improved transparency pretty much like the "tariffication" of NTBs. The methodology for this exercise is as follows: In step 1, I estimate the relationship between utilization rates, tariff preferences and RoOs. In step 2, I retrieve the estimates and invert the relationship to get a simulated MFC that gives, line by line, the same utilization rate as the old array of Roos. In step 3, I calculate the trade-weighted average of the simulated MFC across all lines to get an overall equivalent of the current system and explore the possibility of setting this unique instrument at a uniform rate across lines. This would have two advantages. First, like a uniform tariff, a uniform MFC would make it difficult for lobbies to manipulate the instrument at the margin. This argument is standard in the political-economy literature and has been used time and again in support of reductions in the variance of tariffs (together with standard welfare considerations). Second, uniformity across lines is the only way to eliminate the indirect source of discrimination alluded to earlier. Only if two countries face uniform RoOs and tariff preference will they face uniform incentives irrespective of their initial export structure. The result of this exercise is striking: the average simulated MFC is 25% of good value, a very low (i.e. restrictive) level, confirming Estevadeordal and Suominen's critical assessment of NAFTA's RoOs. Adopting a uniform MFC would imply a relaxation from the benchmark level for sectors like chemicals or textiles & apparel, and a stiffening for wood products, papers and base metals. Overall, however, the changes are not drastic, suggesting perhaps only moderate resistance to change from special interests. The third chapter of the thesis considers whether Europe Agreements of the EU, with the current sets of RoOs, could be the potential model for future EU-centered PTAs. First, I have studied and coded at the six-digit level of the Harmonised System (HS) .both the old RoOs -used before 1997- and the "Single list" Roos -used since 1997. Second, using a Constant Elasticity Transformation function where CEEC exporters smoothly mix sales between the EU and the rest of the world by comparing producer prices on each market, I have estimated the trade effects of the EU RoOs. The estimates suggest that much of the market access conferred by the EAs -outside sensitive sectors- was undone by the cost-raising effects of RoOs. The chapter also contains an analysis of the evolution of the CEECs' trade with the EU from post-communism to accession. Part II The last chapter of the thesis is concerned with anti-dumping, another trade-policy instrument having the effect of reducing market access. In 1995, the Uruguay Round introduced in the Anti-Dumping Agreement (ADA) a mandatory "sunset-review" clause (Article 11.3 ADA) under which anti-dumping measures should be reviewed no later than five years from their imposition and terminated unless there was a serious risk of resumption of injurious dumping. The last chapter, written with Pr. Olivier Cadot and Pr. Jaime de Melo, uses a new database on Anti-Dumping (AD) measures worldwide to assess whether the sunset-review agreement had any effect. The question we address is whether the WTO Agreement succeeded in imposing the discipline of a five-year cycle on AD measures and, ultimately, in curbing their length. Two methods are used; count data analysis and survival analysis. First, using Poisson and Negative Binomial regressions, the count of AD measures' revocations is regressed on (inter alia) the count of "initiations" lagged five years. The analysis yields a coefficient on measures' initiations lagged five years that is larger and more precisely estimated after the agreement than before, suggesting some effect. However the coefficient estimate is nowhere near the value that would give a one-for-one relationship between initiations and revocations after five years. We also find that (i) if the agreement affected EU AD practices, the effect went the wrong way, the five-year cycle being quantitatively weaker after the agreement than before; (ii) the agreement had no visible effect on the United States except for aone-time peak in 2000, suggesting a mopping-up of old cases. Second, the survival analysis of AD measures around the world suggests a shortening of their expected lifetime after the agreement, and this shortening effect (a downward shift in the survival function postagreement) was larger and more significant for measures targeted at WTO members than for those targeted at non-members (for which WTO disciplines do not bind), suggesting that compliance was de jure. A difference-in-differences Cox regression confirms this diagnosis: controlling for the countries imposing the measures, for the investigated countries and for the products' sector, we find a larger increase in the hazard rate of AD measures covered by the Agreement than for other measures.

Mapping of Environmental Data Using Kernel-Based Methods

Recently, kernel-based Machine Learning methods have gained great popularity in many data analysis and data mining fields: pattern recognition, biocomputing, speech and vision, engineering, remote sensing etc. The paper describes the use of kernel methods to approach the processing of large datasets from environmental monitoring networks. Several typical problems of the environmental sciences and their solutions provided by kernel-based methods are considered: classification of categorical data (soil type classification), mapping of environmental and pollution continuous information (pollution of soil by radionuclides), mapping with auxiliary information (climatic data from Aral Sea region). The promising developments, such as automatic emergency hot spot detection and monitoring network optimization are discussed as well.