Un partenariat public-privé rigide ou flexible ? Théorie et application aux concessions routières à péage

In this article, we explore the contractual design of toll road concession contracts. We highlight the fact that contracting parties try to sign not only complete rigid contracts in order to avoid renegotiations but also flexible contracts in order to adapt contractual framework to contingencies and to create incentives for cooperative behavior. This gives rise to multiple toll adjustment provisions and to a tradeoff between rigid and flexible contracts. Such a tradeoff is formalized using an incomplete contract framework - including ex post maladaptation and renegotiation costs - and propositions are tested using an original database of 71 concession contracts. Our results suggest an important role for economic efficiency concerns, as well as politics, in designing such public-private contracts. Codes JEL : D23, H11, H54, L14, L9.

Reproducibility and within-day variability of body fat masurements using segmental bipolar bioelectrical impedance in women

Objective: to assess the between and within-device reproducibility, as well as within-day variability of body fat measurements. Methods: body fat percentage (%BF) was measured twice on seventeen female students aged between 18 and 20 with a body mass index of 21.9 22.6 kg/m2 (mean SD) using seven bipolar bioelectrical impedance devices (BF-306) according to the manufacturer's recommendations. Each student was also measured each hour between 7:00 and 22:00. Statistical analysis was conducted using a general linear model for repeated measurements. Results: the correlation between first and second measurements was very high (Pearson r between 0.985 and 1.000, p<0.001), as well as the correlation between devices (Pearson r between 0.986 and 0.999, all p<0.001). Repeated measurements analysis showed no differences were between devices (F test=0.83, p=0.59) or readings (first vs. second: F test=0.12, p=0.74). Conversely, significant differences were found between assessment periods throughout the day, measurements made in the morning being lower than those made in the afternoon. Assuming an overall daily average of 100 (based on all measurements), the values were 95.8 3.2 (mean SD) at 8:00 versus 101.3 3.0 at 20:00, corresponding to a mean change of 2.2 1.1 in %BF (F test for repeated values=6.58, p<0.001). Conclusions: the between and within-device reproducibility for measuring body fat is high, enabling the use of multiple devices in a single study. Conversely, small but significant changes in body fat measurements occur during the day, urging body fat measurements to be performed at fixed times.

Predictors of return to work after a knee injury in patients hospitalized in vocational rehabilitation

Introduction.- Knee injuries are frequent in a young and active population. Most of the patients resume their professional activity but few studies were interested in factors that predict a return to work. The aim of this study is to identify these predictors from a large panel of bio-psychosocial variables. We postulated that the return to work 3 months and 2 years after discharge is mostly predicted by psychosocial variables.Patients and methods.- Prospective study, patients hospitalized for a knee injury. Variables measured: the abbreviated injury score (AIS) for the gravity of the injuries, analog visual scale for the intensity of pain, INTERMED for the bio-psychosocial complexity, SF-36 for the quality of life, HADs for the anxiety/depression symptoms and IKDC score for the knee function. Univariate logistic regressions, adjusted for age and gender, were performed in order to predict return to work.Results.- One hundred and twenty-six patients hospitalized during 8 months after the accident were included into this prospective study. A total of 73 (58%) and 75 (59%) questionnaires were available after 3 months and 2 years, respectively. The SF-36 pain was the sole predictor of return to work at 3 months (odds Ratio 1.06 [1.02-1.10], P = 0.01; for a one point increase) and 2 years (odds Ratio 1.06 [1.02-1.10], P = 0.01). At three months, other factors are SF-36 (physic sub-scale), IKDC score, the presence of a work contract and the presence of litigation. The bio-psychosocial complexity, the presence of depressive symptoms predicts the return to work at two years.Discussion.- Our working hypothesis was partially confirmed: some psychosocial factors (i.e. depressive symptoms, work contract, litigation, INTERMED) predict the return to work but the physical health and the knee function, perceived by the patient, are also correlated. Pain is the sole factor isolated at both times (i.e. 3 months and 2 years) and, consequently, appears a key element in the prediction of the return to work. Some factors are accessible to the rehabilitation program but only if an interdisciplinary approach is performed.

Technology transfer of an oil-in-water vaccine-adjuvant for strengthening pandemic influenza preparedness in Indonesia.

With the current enzootic circulation of highly pathogenic avian influenza viruses, the ability to increase global pandemic influenza vaccine production capacity is of paramount importance. This has been highlighted by, and is one of the main pillars of, the WHO Global Action Plan for Influenza Vaccines (GAP). Such capacity expansion is especially relevant in developing countries. The Vaccine Formulation Laboratory at University of Lausanne is engaged in the technology transfer of an antigen-sparing oil-in-water adjuvant in order to empower developing countries vaccine manufacturers to increase pandemic influenza vaccine capacity. In a one-year project funded by United States Department of Health and Human Services, the Vaccine Formulation Laboratory transferred the process know-how and associated equipment for the pilot-scale manufacturing of an oil-in-water adjuvant to Bio Farma, Indonesia's state-owned vaccine manufacturer, for subsequent formulation with H5N1 pandemic influenza vaccines. This paper describes the experience acquired and lessons learnt from this technology transfer project.

Financial Markets and Real Ecinomy: Four Essays in International Trade

Financial markets play an important role in an economy performing various functions like mobilizing and pooling savings, producing information about investment opportunities, screening and monitoring investments, implementation of corporate governance, diversification and management of risk. These functions influence saving rates, investment decisions, technological innovation and, therefore, have important implications for welfare. In my PhD dissertation I examine the interplay of financial and product markets by looking at different channels through which financial markets may influence an economy.My dissertation consists of four chapters. The first chapter is a co-authored work with Martin Strieborny, a PhD student from the University of Lausanne. The second chapter is a co-authored work with Melise Jaud, a PhD student from the Paris School of Economics. The third chapter is co-authored with both Melise Jaud and Martin Strieborny. The last chapter of my PhD dissertation is a single author paper.Chapter 1 of my PhD thesis analyzes the effect of financial development on growth of contract intensive industries. These industries intensively use intermediate inputs that neither can be sold on organized exchange, nor are reference-priced (Levchenko, 2007; Nunn, 2007). A typical example of a contract intensive industry would be an industry where an upstream supplier has to make investments in order to customize a product for needs of a downstream buyer. After the investment is made and the product is adjusted, the buyer may refuse to meet a commitment and trigger ex post renegotiation. Since the product is customized to the buyer's needs, the supplier cannot sell the product to a different buyer at the original price. This is referred in the literature as the holdup problem. As a consequence, the individually rational suppliers will underinvest into relationship-specific assets, hurting the downstream firms with negative consequences for aggregate growth. The standard way to mitigate the hold up problem is to write a binding contract and to rely on the legal enforcement by the state. However, even the most effective contract enforcement might fail to protect the supplier in tough times when the buyer lacks a reliable source of external financing. This suggests the potential role of financial intermediaries, banks in particular, in mitigating the incomplete contract problem. First, financial products like letters of credit and letters of guarantee can substantially decrease a risk and transaction costs of parties. Second, a bank loan can serve as a signal about a buyer's true financial situation, an upstream firm will be more willing undertake relationship-specific investment knowing that the business partner is creditworthy and will abstain from myopic behavior (Fama, 1985; von Thadden, 1995). Therefore, a well-developed financial (especially banking) system should disproportionately benefit contract intensive industries.The empirical test confirms this hypothesis. Indeed, contract intensive industries seem to grow faster in countries with a well developed financial system. Furthermore, this effect comes from a more developed banking sector rather than from a deeper stock market. These results are reaffirmed examining the effect of US bank deregulation on the growth of contract intensive industries in different states. Beyond an overall pro-growth effect, the bank deregulation seems to disproportionately benefit the industries requiring relationship-specific investments from their suppliers.Chapter 2 of my PhD focuses on the role of the financial sector in promoting exports of developing countries. In particular, it investigates how credit constraints affect the ability of firms operating in agri-food sectors of developing countries to keep exporting to foreign markets.Trade in high-value agri-food products from developing countries has expanded enormously over the last two decades offering opportunities for development. However, trade in agri-food is governed by a growing array of standards. Sanitary and Phytosanitary standards (SPS) and technical regulations impose additional sunk, fixed and operating costs along the firms' export life. Such costs may be detrimental to firms' survival, "pricing out" producers that cannot comply. The existence of these costs suggests a potential role of credit constraints in shaping the duration of trade relationships on foreign markets. A well-developed financial system provides the funds to exporters necessary to adjust production processes in order to meet quality and quantity requirements in foreign markets and to maintain long-standing trade relationships. The products with higher needs for financing should benefit the most from a well functioning financial system. This differential effect calls for a difference-in-difference approach initially proposed by Rajan and Zingales (1998). As a proxy for demand for financing of agri-food products, the sanitary risk index developed by Jaud et al. (2009) is used. The empirical literature on standards and norms show high costs of compliance, both variable and fixed, for high-value food products (Garcia-Martinez and Poole, 2004; Maskus et al., 2005). The sanitary risk index reflects the propensity of products to fail health and safety controls on the European Union (EU) market. Given the high costs of compliance, the sanitary risk index captures the demand for external financing to comply with such regulations.The prediction is empirically tested examining the export survival of different agri-food products from firms operating in Ghana, Mali, Malawi, Senegal and Tanzania. The results suggest that agri-food products that require more financing to keep up with food safety regulation of the destination market, indeed sustain longer in foreign market, when they are exported from countries with better developed financial markets.Chapter 3 analyzes the link between financial markets and efficiency of resource allocation in an economy. Producing and exporting products inconsistent with a country's factor endowments constitutes a serious misallocation of funds, which undermines competitiveness of the economy and inhibits its long term growth. In this chapter, inefficient exporting patterns are analyzed through the lens of the agency theories from the corporate finance literature. Managers may pursue projects with negative net present values because their perquisites or even their job might depend on them. Exporting activities are particularly prone to this problem. Business related to foreign markets involves both high levels of additional spending and strong incentives for managers to overinvest. Rational managers might have incentives to push for exports that use country's scarce factors which is suboptimal from a social point of view. Export subsidies might further skew the incentives towards inefficient exporting. Management can divert the export subsidies into investments promoting inefficient exporting.Corporate finance literature stresses the disciplining role of outside debt in counteracting the internal pressures to divert such "free cash flow" into unprofitable investments. Managers can lose both their reputation and the control of "their" firm if the unpaid external debt triggers a bankruptcy procedure. The threat of possible failure to satisfy debt service payments pushes the managers toward an efficient use of available resources (Jensen, 1986; Stulz, 1990; Hart and Moore, 1995). The main sources of debt financing in the most countries are banks. The disciplining role of banks might be especially important in the countries suffering from insufficient judicial quality. Banks, in pursuing their rights, rely on comparatively simple legal interventions that can be implemented even by mediocre courts. In addition to their disciplining role, banks can promote efficient exporting patterns in a more direct way by relaxing credit constraints of producers, through screening, identifying and investing in the most profitable investment projects. Therefore, a well-developed domestic financial system, and particular banking system, would help to push a country's exports towards products congruent with its comparative advantage.This prediction is tested looking at the survival of different product categories exported to US market. Products are identified according to the Euclidian distance between their revealed factor intensity and the country's factor endowments. The results suggest that products suffering from a comparative disadvantage (labour-intensive products from capital-abundant countries) survive less on the competitive US market. This pattern is stronger if the exporting country has a well-developed banking system. Thus, a strong banking sector promotes exports consistent with a country comparative advantage.Chapter 4 of my PhD thesis further examines the role of financial markets in fostering efficient resource allocation in an economy. In particular, the allocative efficiency hypothesis is investigated in the context of equity market liberalization.Many empirical studies document a positive and significant effect of financial liberalization on growth (Levchenko et al. 2009; Quinn and Toyoda 2009; Bekaert et al., 2005). However, the decrease in the cost of capital and the associated growth in investment appears rather modest in comparison to the large GDP growth effect (Bekaert and Harvey, 2005; Henry, 2000, 2003). Therefore, financial liberalization may have a positive impact on growth through its effect on the allocation of funds across firms and sectors.Free access to international capital markets allows the largest and most profitable domestic firms to borrow funds in foreign markets (Rajan and Zingales, 2003). As domestic banks loose some of their best clients, they reoptimize their lending practices seeking new clients among small and younger industrial firms. These firms are likely to be more risky than large and established companies. Screening of customers becomes prevalent as the return to screening rises. Banks, ceteris paribus, tend to focus on firms operating in comparative-advantage sectors because they are better risks. Firms in comparative-disadvantage sectors finding it harder to finance their entry into or survival in export markets either exit or refrain from entering export markets. On aggregate, one should therefore expect to see less entry, more exit, and shorter survival on export markets in those sectors after financial liberalization.The paper investigates the effect of financial liberalization on a country's export pattern by comparing the dynamics of entry and exit of different products in a country export portfolio before and after financial liberalization.The results suggest that products that lie far from the country's comparative advantage set tend to disappear relatively faster from the country's export portfolio following the liberalization of financial markets. In other words, financial liberalization tends to rebalance the composition of a country's export portfolio towards the products that intensively use the economy's abundant factors.

3

A Knudsen flow reactor has been used to quantify functional groups on the surface of seven different types of combustion particle samples: 3 amorphous carbons (FS 101, Printex 60, FW 2), 2 flame soots (hexane soot generated from a rich and a lean diffusion flame), and 2 Diesel particles (SRM 2975, Diesel soot recovered from a Diesel particulate filter). The technique is based on a heterogeneous titration reaction between a probe gas and a specific functional group on the particle surface. Six probe gases have been selected for the quantification of important functional groups: N(CH3)3 for the titration of acidic sites, NH2OH for carbonyl functions of aldehydes and ketones, CF3COOH and HCl for basic sites of different strength, O3 and NO2 for oxidizable groups. The limit of detection was generally well below 1% of a formal monolayer of adsorbed probe gas. Results obtained with N(CH3)3 were higher for the FW 2 amorphous carbon (post-oxidized sample, according to the manufacturer) and the Diesel particles (between 5.2·10 13 and 5.8·10 13 molecule/cm2), indicating a higher state of oxidation than for the other samples (between 1.3·10 12 and 3.7·10 12 molecule/cm2). The ratio of uptakes of CF3COOH and HCl inferred the presence of basic oxides on the particle surface, owing to the larger stability of the acetate compared to the chloride counter ion in the resulting pyrylium salt. The reactivity of the FS 101 amorphous carbon (3.7·10 15 molecule/cm2) and the hexane flame soot (between 1.9·10 15 and 2.7·10 15 molecule/cm2) towards O3 was very high, indicating the presence of a huge amount of oxidizable or reduced groups on the surface of these samples. Besides the quantification of surface functional groups, the kinetics of reactions between particles and probe gases has also been studied. The uptake coefficient γ0 was roughly correlated with the amount of probe gas taken up by the samples. Indeed, the presence of a high density of functional groups led to fast uptake of the probe gas. These different findings indicate that the particle surface appeared multi-functional, with the simultaneous presence of antagonistic functional groups which do not undergo internal chemical reactions, such as acid-base neutralization. Results also point to important differences in the surface reactivity of the samples, depending on the combustion conditions. The relative distribution of the surface functional groups may be a useful indicator for the state of oxidation and the reactivity of the particle surface.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Performance comparison of an active matrix flat panel imager, computed radiography system, and a screen-film system at four standard radiation qualities.

Four standard radiation qualities (from RQA 3 to RQA 9) were used to compare the imaging performance of a computed radiography (CR) system (general purpose and high resolution phosphor plates of a Kodak CR 9000 system), a selenium-based direct flat panel detector (Kodak Direct View DR 9000), and a conventional screen-film system (Kodak T-MAT L/RA film with a 3M Trimax Regular screen of speed 400) in conventional radiography. Reference exposure levels were chosen according to the manufacturer's recommendations to be representative of clinical practice (exposure index of 1700 for digital systems and a film optical density of 1.4). With the exception of the RQA 3 beam quality, the exposure levels needed to produce a mean digital signal of 1700 were higher than those needed to obtain a mean film optical density of 1.4. In spite of intense developments in the field of digital detectors, screen-film systems are still very efficient detectors for most of the beam qualities used in radiology. An important outcome of this study is the behavior of the detective quantum efficiency of the digital radiography (DR) system as a function of beam energy. The practice of users to increase beam energy when switching from a screen-film system to a CR system, in order to improve the compromise between patient dose and image quality, might not be appropriate when switching from screen-film to selenium-based DR systems.

The Vaccine Formulation Laboratory: a platform for access to adjuvants.

Adjuvants are increasingly used by the vaccine research and development community, particularly for their ability to enhance immune responses and for their dose-sparing properties. However, they are not readily available to the majority of public sector vaccine research groups, and even those with access to suitable adjuvants may still fail in the development of their vaccines because of lack of knowledge on how to correctly formulate the adjuvants. This shortcoming led the World Health Organization to advocate for the establishment of the Vaccine Formulation Laboratory at the University of Lausanne, Switzerland. The primary mission of the laboratory is to transfer adjuvants and formulation technology free of intellectual property rights to academic institutions, small biotechnology companies and developing countries vaccine manufacturers. In this context, the transfer of an oil-in-water emulsion to Bio Farma, an Indonesian vaccine manufacturer, was initiated to increase domestic pandemic influenza vaccine production capacity as part of the national pandemic influenza preparedness plan.

Biological markers of alcohol consumption in alcoholised drivers: Comparison of capillary electrophoresis (CZE CDT) and a direct immunoassay (N Latex CDT) with the traditional method of anion-exchange chromatography-immunoturbidimetry (%CDT TIA).

Objectives: The aim of this study was to compare specificity and sensitivity of different biological markers that can be used in a forensic field to identify potentially dangerous drivers because of their alcohol habits. Methods: We studied 280 Swiss drivers after driving while under the alcohol influence. 33 were excluded for not having CDT N results, 247 were included (218 men (88%) and 29 women (12%). Mean age was 42,4 (SD:12, min: 20 max: 76). The evaluation of the alcohol consumption concerned the month before the CDT test and was considered as such after the interview: Heavy drinkers (>3 drinks per day): 60 (32.7%), < 3 drinks per day and moderate: 127 (51.4%) 114 (46.5%), abstinent: 60 (24.3%) 51 (21%). Alcohol intake was monitored by structured interviews, self-reported drinking habits and the C-Audit questionnaire as well as information provided by their family and general practitioner. Consumption was quantified in terms of standard drinks, which contain approximately 10 grams of pure alcohol (Ref. WHO). Results: comparison between moderate (less or equal to 3 drinks per day) and excessive drinkers (more than 3 drinks) Marker ROC area 95% CI cut-off sensitivity specificity CDT TIA 0.852 0.786-0917 2.6* 0.93 LR+1.43 0.35 LR-0.192 CDT N latex 0.875 0.821-0.930 2.5* 0.66 LR+ 6.93 0.90 LR- 0.369 Asialo+disialo-tf 0.881 0.826-0.936 1.2* 0.78 LR+4.07 0.80 LR-0.268 1.7° 0.66 LR+8.9 0.93 LR-0.360 GGT 0.659 0.580-0.737 85* 0.37 LR+2.14 0.83 LR-0.764 * cut-off point suggested by the manufacturer ° cut-off point suggested by our laboratory Conclusion: With the cut-off point established by the manufacturer, CDT TIA performed poorly in term of specificity. N latex CDT and CZE CDT were better, especially if a 1.7 cut-off is used with CZE

Running versus strength-based warm-up : acute effects on isometric knee extension function

This study investigated the influence of two warm-up protocols on neural and contractile parameters of knee extensors. A series of neuromuscular tests including voluntary and electrically evoked contractions were performed before and after running- (R (WU); slow running, athletic drills, and sprints) and strength-based (S (WU); bilateral 90 degrees back squats, Olympic lifting movements and reactivity exercises) warm ups (duration ~40 min) in ten-trained subjects. The estimated overall mechanical work was comparable between protocols. Maximal voluntary contraction torque (+15.6%; P < 0.01 and +10.9%; P < 0.05) and muscle activation (+10.9 and +12.9%; P < 0.05) increased to the same extent after R (WU) and S (WU), respectively. Both protocols caused a significant shortening of time to contract (-12.8 and -11.8% after R (WU) and S (WU); P < 0.05), while the other twitch parameters did not change significantly. Running- and strength-based warm ups induce similar increase in knee extensors force-generating capacity by improving the muscle activation. Both protocols have similar effects on M-wave and isometric twitch characteristics.

Survey on batch-to-batch variation in spray paints: a collaborative study

This study represents the most extensive analysis of batch-to-batch variations in spray paint samples to date. The survey was performed as a collaborative project of the ENFSI (European Network of Forensic Science Institutes) Paint and Glass Working Group (EPG) and involved 11 laboratories. Several studies have already shown that paint samples of similar color but from different manufacturers can usually be differentiated using an appropriate analytical sequence. The discrimination of paints from the same manufacturer and color (batch-to-batch variations) is of great interest and these data are seldom found in the literature. This survey concerns the analysis of batches from different color groups (white, papaya (special shade of orange), red and black) with a wide range of analytical techniques and leads to the following conclusions. Colored batch samples are more likely to be differentiated since their pigment composition is more complex (pigment mixtures, added pigments) and therefore subject to variations. These variations may occur during the paint production but may also occur when checking the paint shade in quality control processes. For these samples, techniques aimed at color/pigment(s) characterization (optical microscopy, microspectrophotometry (MSP), Raman spectroscopy) provide better discrimination than techniques aimed at the organic (binder) or inorganic composition (fourier transform infrared spectroscopy (FTIR) or elemental analysis (SEM - scanning electron microscopy and XRF - X-ray fluorescence)). White samples contain mainly titanium dioxide as a pigment and the main differentiation is based on the binder composition (Csingle bondH stretches) detected either by FTIR or Raman. The inorganic composition (elemental analysis) also provides some discrimination. Black samples contain mainly carbon black as a pigment and are problematic with most of the spectroscopic techniques. In this case, pyrolysis-GC/MS represents the best technique to detect differences. Globally, Py-GC/MS may show a high potential of discrimination on all samples but the results are highly dependent on the specific instrumental conditions used. Finally, the discrimination of samples when data was interpreted visually as compared to statistically using principal component analysis (PCA) yielded very similar results. PCA increases sensitivity and could perform better on specific samples, but one first has to ensure that all non-informative variation (baseline deviation) is eliminated by applying correct pre-treatments. Statistical treatments can be used on a large data set and, when combined with an expert's opinion, will provide more objective criteria for decision making.

Research of stimulants and anabolic steroids in dietary supplements.

The purpose of this study was to analyze the composition of 103 dietary supplements bought on the internet. The supplements were dispatched in four different categories according to their announced contents [creatine, prohormones, "mental enhancers" and branched chain amino acids (BCAA)]. All the supplements were screened for the presence of stimulants and main anabolic steroids parent compounds. At the same time, the research was focused on the precursors and metabolites of testosterone and nandrolone. The study pointed out three products containing an anabolic steroid, metandienone, in a very high amount. The ingestion of such products induced a high quantity of metandienone metabolites in urines that would be considered as a positive antidoping test. The results have also shown that one creatine product and three "mental enhancers" contained traces of hormones or prohormones not claimed on the labels and 14 prohormone products contained substances other than those indicated by the manufacturer. The oral intake of the creatine product revealed the presence of the two main nandrolone metabolites (19-norandrosterone and 19-noretiocholanolone) in urine.