Maps as risk mitigation tools. Adaptation of the Swiss hazard assessment and mapping methodology to a Moroccan site: Beni Mellal

Dans le contexte climatique actuel, les régions méditerranéennes connaissent une intensification des phénomènes hydrométéorologiques extrêmes. Au Maroc, le risque lié aux inondations est devenu problématique, les communautés étant vulnérables aux événements extrêmes. En effet, le développement économique et urbain rapide et mal maîtrisé augmente l'exposition aux phénomènes extrêmes. La Direction du Développement et de la Coopération suisse (DDC) s'implique activement dans la réduction des risques naturels au Maroc. La cartographie des dangers et son intégration dans l'aménagement du territoire représentent une méthode efficace afin de réduire la vulnérabilité spatiale. Ainsi, la DDC a mandaté ce projet d'adaptation de la méthode suisse de cartographie des dangers à un cas d'étude marocain (la ville de Beni Mellal, région de Tadla-Azilal, Maroc). La méthode suisse a été adaptée aux contraintes spécifiques du terrain (environnement semi-aride, morphologie de piémont) et au contexte de transfert de connaissances (caractéristiques socio-économiques et pratiques). Une carte des phénomènes d'inondations a été produite. Elle contient les témoins morphologiques et les éléments anthropiques pertinents pour le développement et l'aggravation des inondations. La modélisation de la relation pluie-débit pour des événements de référence, et le routage des hydrogrammes de crue ainsi obtenus ont permis d'estimer quantitativement l'aléa inondation. Des données obtenues sur le terrain (estimations de débit, extension de crues connues) ont permis de vérifier les résultats des modèles. Des cartes d'intensité et de probabilité ont été obtenues. Enfin, une carte indicative du danger d'inondation a été produite sur la base de la matrice suisse du danger qui croise l'intensité et la probabilité d'occurrence d'un événement pour obtenir des degrés de danger assignables au territoire étudié. En vue de l'implémentation des cartes de danger dans les documents de l'aménagement du territoire, nous nous intéressons au fonctionnement actuel de la gestion institutionnelle du risque à Beni Mellal, en étudiant le degré d'intégration de la gestion et la manière dont les connaissances sur les risques influencent le processus de gestion. L'analyse montre que la gestion est marquée par une logique de gestion hiérarchique et la priorité des mesures de protection par rapport aux mesures passives d'aménagement du territoire. Les connaissances sur le risque restent sectorielles, souvent déconnectées. L'innovation dans le domaine de la gestion du risque résulte de collaborations horizontales entre les acteurs ou avec des sources de connaissances externes (par exemple les universités). Des recommandations méthodologiques et institutionnelles issues de cette étude ont été adressées aux gestionnaires en vue de l'implémentation des cartes de danger. Plus que des outils de réduction du risque, les cartes de danger aident à transmettre des connaissances vers le public et contribuent ainsi à établir une culture du risque. - Severe rainfall events are thought to be occurring more frequently in semi-arid areas. In Morocco, flood hazard has become an important topic, notably as rapid economic development and high urbanization rates have increased the exposure of people and assets in hazard-prone areas. The Swiss Agency for Development and Cooperation (SADC) is active in natural hazard mitigation in Morocco. As hazard mapping for urban planning is thought to be a sound tool for vulnerability reduction, the SADC has financed a project aimed at adapting the Swiss approach for hazard assessment and mapping to the case of Morocco. In a knowledge transfer context, the Swiss method was adapted to the semi-arid environment, the specific piedmont morphology and to socio-economic constraints particular to the study site. Following the Swiss guidelines, a hydro-geomorphological map was established, containing all geomorphic elements related to known past floods. Next, rainfall / runoff modeling for reference events and hydraulic routing of the obtained hydrographs were carried out in order to assess hazard quantitatively. Field-collected discharge estimations and flood extent for known floods were used to verify the model results. Flood hazard intensity and probability maps were obtained. Finally, an indicative danger map as defined within the Swiss hazard assessment terminology was calculated using the Swiss hazard matrix that convolves flood intensity with its recurrence probability in order to assign flood danger degrees to the concerned territory. Danger maps become effective, as risk mitigation tools, when implemented in urban planning. We focus on how local authorities are involved in the risk management process and how knowledge about risk impacts the management. An institutional vulnerability "map" was established based on individual interviews held with the main institutional actors in flood management. Results show that flood hazard management is defined by uneven actions and relationships, it is based on top-down decision-making patterns, and focus is maintained on active mitigation measures. The institutional actors embody sectorial, often disconnected risk knowledge pools, whose relationships are dictated by the institutional hierarchy. Results show that innovation in the risk management process emerges when actors collaborate despite the established hierarchy or when they open to outer knowledge pools (e.g. the academia). Several methodological and institutional recommendations were addressed to risk management stakeholders in view of potential map implementation to planning. Hazard assessment and mapping is essential to an integrated risk management approach: more than a mitigation tool, danger maps represent tools that allow communicating on hazards and establishing a risk culture.

NanoImpactNet - building a multi-stakeholder dialogue on the health and environmental impact of nanomaterials

NanoImpactNet (NIN) is a multidisciplinary European Commission funded network on the environmental, health and safety (EHS) impact of nanomaterials. The 24 founding scientific institutes are leading European research groups active in the fields of nanosafety, nanorisk assessment and nanotoxicology. This 4-year project is the new focal point for information exchange within the research community. Contact with other stakeholders is vital and their needs are being surveyed. NIN is communicating with 100s of stakeholders: businesses; internet platforms; industry associations; regulators; policy makers; national ministries; international agencies; standard-setting bodies and NGOs concerned by labour rights, EHS or animal welfare. To improve this communication, internet research, a questionnaire distributed via partners and targeted phone calls were used to identify stakeholders' interests and needs. Knowledge gaps and the necessity for further data mentioned by representatives of all stakeholder groups in the targeted phone calls concerned: • the potential toxic and safety hazards of nanomaterials throughout their lifecycles; • the fate and persistence of nanoparticles in humans, animals and the environment; • the associated risks of nanoparticle exposure; • greater participation in: the preparation of nomenclature, standards, methodologies, protocols and benchmarks; • the development of best practice guidelines; • voluntary schemes on responsibility; • databases of materials, research topics and themes, but also of expertise. These findings suggested that stakeholders and NIN researchers share very similar knowledge needs, and that open communication and free movement of knowledge will benefit both researchers and industry. Subsequently a workshop was organised by NIN focused on building a sustainable multi-stakeholder dialogue. Specific questions were asked to different stakeholder groups to encourage discussions and open communication. 1. What information do stakeholders need from researchers and why? The discussions about this question confirmed the needs identified in the targeted phone calls. 2. How to communicate information? While it was agreed that reporting should be enhanced, commercial confidentiality and economic competition were identified as major obstacles. It was recognised that expertise was needed in the areas of commercial law and economics for a wellinformed treatment of this communication issue. 3. Can engineered nanomaterials be used safely? The idea that nanomaterials are probably safe because some of them have been produced 'for a long time', was questioned, since many materials in common use have been proved to be unsafe. The question of safety is also about whether the public has confidence. New legislation like REACH could help with this issue. Hazards do not materialise if exposure can be avoided or at least significantly reduced. Thus, there is a need for information on what can be regarded as acceptable levels of exposure. Finally, it was noted that there is no such thing as a perfectly safe material but only boundaries. At this moment we do not know where these boundaries lie. The matter of labelling of products containing nanomaterials was raised, as in the public mind safety and labelling are connected. This may need to be addressed since the issue of nanomaterials in food, drink and food packaging may be the first safety issue to attract public and media attention, and this may have an impact on 'nanotechnology as a whole. 4. Do we need more or other regulation? Any decision making process should accommodate the changing level of uncertainty. To address the uncertainties, adaptations of frameworks such as REACH may be indicated for nanomaterials. Regulation is often needed even if voluntary measures are welcome because it mitigates the effects of competition between industries. Data cannot be collected on voluntary bases for example. NIN will continue with an active stakeholder dialogue to further build on interdisciplinary relationships towards a healthy future with nanotechnology.

Tools in pharmacovigilance in psychiatry: therapeutic drug monitoring, pharmacogenetic tests and drug-drug interactions databases

SUMMARYIn order to increase drug safety we must better understand how medication interacts with the body of our patients and this knowledge should be made easily available for the clinicians prescribing the medication. This thesis contributes to how the knowledge of some drug properties can increase and how to make information readily accessible for the medical professionals. Furthermore it investigates the use of Therapeutic drug monitoring, drug interaction databases and pharmacogenetic tests in pharmacovigilance.Two pharmacogenetic studies in the naturalistic setting of psychiatric in-patients clinics have been performed; one with the antidepressant mirtazapine, the other with the antipsychotic clozapine. Forty-five depressed patients have been treated with mirtazapine and were followed for 8 weeks. The therapeutic effect was as seen in other previous studies. Enantioselective analyses could confirm an influence of age, gender and smoking in the pharmacokinetics of mirtazapine; it showed a significant influence of the CYP2D6 genotype on the antidepressant effective S-enantiomer, and for the first time an influence of the CYP2B6 genotype on the plasma concentrations of the 8-OH metabolite was found. The CYP2B6*/*6 genotype was associated to better treatment response. A detailed hypothesis of the metabolic pathways of mirtazapine is proposed. In the second pharmacogenetic study, analyses of 75 schizophrenic patients treated with clozapine showed the influence of CYP450 and ABCB1 genotypes on its pharmacokinetics. For the first time we could demonstrate an in vivo effect of the CYP2C19 genotype and an influence of P-glycoprotein on the plasma concentrations of clozapine. Further we confirmed in vivo the prominent role of CYP1A2 in the metabolism of clozapine.Identifying risk factors for the occurrence of serious adverse drug reactions (SADR) would allow a more individualized and safer drug therapy. SADR are rare events and therefore difficult to study. We tested the feasibility of a nested matched case-control study to examine the influence of high drug plasma levels and CYP2D6 genotypes on the risk to experience an SADR. In our sample we compared 62 SADR cases with 82 controls; both groups were psychiatric patients from the in-patient clinic Königsfelden. Drug plasma levels of >120% of the upper recommended references could be identified as a risk factor with a statistically significant odds ratio of 3.5, a similar trend could be seen for CYP2D6 poor metaboliser. Although a matched case-control design seems a valid method, 100% matching is not easy to perform in a relative small cohort of one in-patient clinic. However, a nested case-control study is feasible.On the base of the experience gained in the AMSP+ study and the fact that we have today only sparse data indicating that routine drug plasma concentration monitoring and/or pharmacogenetic testing in psychiatry are justified to minimize the risk for ADR, we developed a test algorithm named "TDM plus" (TDM plus interaction checks plus pharmacogenetic testing).Pharmacovigilance programs such as the AMSP project (AMSP = Arzneimittelsicherheit in der Psychiatrie) survey psychiatric in-patients in order to collect SADR and to detect new safety signals. Case reports of such SADR are, although anecdotal, valuable to illustrate rare clinical events and sometimes confirm theoretical assumptions of e.g. drug interactions. Seven pharmacovigilance case reports are summarized in this thesis.To provide clinicians with meaningful information on the risk of drug combinations, during the course of this thesis the internet based drug interaction program mediQ.ch (in German) has been developed. Risk estimation is based on published clinical and pharmacological information of single drugs and alimentary products, including adverse drug reaction profiles. Information on risk factors such as renal and hepatic insufficiency and specific genotypes are given. More than 20'000 drug pairs have been described in detail. Over 2000 substances with their metabolic and transport pathways are included and all information is referenced with links to the published scientific literature or other information sources. Medical professionals of more than 100 hospitals and 300 individual practitioners do consult mediQ.ch regularly. Validations with comparisons to other drug interaction programs show good results.Finally, therapeutic drug monitoring, drug interaction programs and pharmacogenetic tests are helpful tools in pharmacovigilance and should, in absence of sufficient routine tests supporting data, be used as proposed in our TDM plus algorithm.RESUMEPour améliorer la sécurité d'emploi des médicaments il est important de mieux comprendre leurs interactions dans le corps des patients. Ensuite le clinicien qui prescrit une pharmacothérapie doit avoir un accès simple à ces informations. Entre autres, cette thèse contribue à mieux connaître les caractéristiques pharmacocinétiques de deux médicaments. Elle examine aussi l'utilisation de trois outils en pharmacovigilance : le monitorage thérapeutique des taux plasmatiques des médicaments (« therapeutic drug monitoring »), un programme informatisé d'estimation du risque de combinaisons médicamenteuses, et enfin des tests pharmacogénétiques.Deux études cliniques pharmacogénétiques ont été conduites dans le cadre habituel de clinique psychiatrique : l'une avec la mirtazapine (antidépresseur), l'autre avec la clozapine (antipsychotique). On a traité 45 patients dépressifs avec de la mirtazapine pendant 8 semaines. L'effet thérapeutique était semblable à celui des études précédentes. Nous avons confirmé l'influence de l'âge et du sexe sur la pharmacocinétique de la mirtazapine et la différence dans les concentrations plasmatiques entre fumeurs et non-fumeurs. Au moyen d'analyses énantiomères sélectives, nous avons pu montrer une influence significative du génotype CYP2D6 sur l'énantiomère S+, principalement responsable de l'effet antidépresseur. Pour la première fois, nous avons trouvé une influence du génotype CYP2B6 sur les taux plasmatiques de la 8-OH-mirtazapine. Par ailleurs, le génotype CYP2B6*6/*6 était associé à une meilleure réponse thérapeutique. Une hypothèse sur les voies métaboliques détaillées de la mirtazapine est proposée. Dans la deuxième étude, 75 patients schizophrènes traités avec de la clozapine ont été examinés pour étudier l'influence des génotypes des iso-enzymes CYP450 et de la protéine de transport ABCB1 sur la pharmacocinétique de cet antipsychotique. Pour la première fois, on a montré in vivo un effet des génotypes CYP2C19 et ABCB1 sur les taux plasmatiques de la clozapine. L'importance du CYP1A2 dans le métabolisme de la clozapine a été confirmée.L'identification de facteurs de risques dans la survenue d'effets secondaire graves permettrait une thérapie plus individualisée et plus sûre. Les effets secondaires graves sont rares. Dans une étude de faisabilité (« nested matched case-control design » = étude avec appariement) nous avons comparé des patients avec effets secondaires graves à des patients-contrôles prenant le même type de médicaments mais sans effets secondaires graves. Des taux plasmatiques supérieurs à 120% de la valeur de référence haute sont associés à un risque avec « odds ratio » significatif de 3.5. Une tendance similaire est apparue pour le génotype du CYP2D6. Le « nested matched case-control design » semble une méthode valide qui présente cependant une difficulté : trouver des patients-contrôles dans le cadre d'une seule clinique psychiatrique. Par contre la conduite d'une « nested case-control study » sans appariement est recommandable.Sur la base de notre expérience de l'étude AMSP+ et le fait que nous disposons que de peux de données justifiant des monitorings de taux plasmatiques et/ou de tests pharmacogénétiques de routine, nous avons développé un test algorithme nommé « TDMplus » (TDM + vérification d'interactions médicamenteuses + tests pharmacogénétique).Des programmes de pharmacovigilances comme celui de l'AMSP (Arzneimittelsicherheit in der Psychiatrie = pharmacovigilance en psychiatrie) collectent les effets secondaires graves chez les patients psychiatriques hospitalisés pour identifier des signaux d'alertes. La publication de certains de ces cas même anecdotiques est précieuse. Elle décrit des événements rares et quelques fois une hypothèse sur le potentiel d'une interaction médicamenteuse peut ainsi être confirmée. Sept publications de cas sont résumées ici.Dans le cadre de cette thèse, on a développé un programme informatisé sur internet (en allemand) - mediQ.ch - pour estimer le potentiel de risques d'une interaction médicamenteuse afin d'offrir en ligne ces informations utiles aux cliniciens. Les estimations de risques sont fondées sur des informations cliniques (y compris les profils d'effets secondaires) et pharmacologiques pour chaque médicament ou substance combinés. Le programme donne aussi des informations sur les facteurs de risques comme l'insuffisance rénale et hépatique et certains génotypes. Actuellement il décrit en détail les interactions potentielles de plus de 20'000 paires de médicaments, et celles de 2000 substances actives avec leurs voies de métabolisation et de transport. Chaque information mentionne sa source d'origine; un lien hypertexte permet d'y accéder. Le programme mediQ.ch est régulièrement consulté par les cliniciens de 100 hôpitaux et par 300 praticiens indépendants. Les premières validations et comparaisons avec d'autres programmes sur les interactions médicamenteuses montrent de bons résultats.En conclusion : le monitorage thérapeutique des médicaments, les programmes informatisés contenant l'information sur le potentiel d'interaction médicamenteuse et les tests pharmacogénétiques sont de précieux outils en pharmacovigilance. Nous proposons de les utiliser en respectant l'algorithme « TDM plus » que nous avons développé.

Hypertension and microvascular remodelling

In the present review, microvascular remodelling refers to alterations in the structure of resistance vessels contributing to elevated systemic vascular resistance in hypertension. We start with some historical aspects, underscoring the importance of Folkow's contribution made half a century ago. We then move to some basic concepts on the biomechanics of blood vessels, and explicit the definitions proposed by Mulvany for specific forms of remodelling, especially inward eutrophic and inward hypertrophic. The available evidence for the existence of remodelled resistance vessels in hypertension comes next, with relatively more weight given to human, in comparison with animal data. Mechanisms are discussed. The impact of antihypertensive drug treatment on remodelling is described, again with emphasis on human data. Some details are given on the three studies to date which point to remodelling of subcutaneous resistance arteries as an independent predictor of cardiovascular risk in hypertensive patients. We terminate by considering the potential role of remodelling in the pathogenesis of end-organ damage and in the perpetuation of hypertension.

Improving the implementation of evidence-based knowledge in healthcare

The pace of development of new healthcare technologies and related knowledge is very fast. Implementation of high quality evidence-based knowledge is thus mandatory to warrant an effective healthcare system and patient safety. However, even though only a small fraction of the approximate 2500 scientific publication indexed daily in Medline is actually useful to clinical practice, the amountof the new information is much too large to allow busy healthcare professionals to stay aware of possibly important evidence-based information.

Medical futility at the end of life: the perspectives of intensive care and palliative care clinicians.

Objectives Medical futility at the end of life is a growing challenge to medicine. The goals of the authors were to elucidate how clinicians define futility, when they perceive life-sustaining treatment (LST) to be futile, how they communicate this situation and why LST is sometimes continued despite being recognised as futile. Methods The authors reviewed ethics case consultation protocols and conducted semi-structured interviews with 18 physicians and 11 nurses from adult intensive and palliative care units at a tertiary hospital in Germany. The transcripts were subjected to qualitative content analysis. Results Futility was identified in the majority of case consultations. Interviewees associated futility with the failure to achieve goals of care that offer a benefit to the patient's quality of life and are proportionate to the risks, harms and costs. Prototypic examples mentioned are situations of irreversible dependence on LST, advanced metastatic malignancies and extensive brain injury. Participants agreed that futility should be assessed by physicians after consultation with the care team. Intensivists favoured an indirect and stepwise disclosure of the prognosis. Palliative care clinicians focused on a candid and empathetic information strategy. The reasons for continuing futile LST are primarily emotional, such as guilt, grief, fear of legal consequences and concerns about the family's reaction. Other obstacles are organisational routines, insufficient legal and palliative knowledge and treatment requests by patients or families. Conclusion Managing futility could be improved by communication training, knowledge transfer, organisational improvements and emotional and ethical support systems. The authors propose an algorithm for end-of-life decision making focusing on goals of treatment.

Cell locations for AQP1, AQP4 and 9 in the non-human primate brain.

The presence of three water channels (aquaporins, AQP), AQP1, AQP4 and AQP9 were observed in normal brain and several rodent models of brain pathologies. Little is known about AQP distribution in the primate brain and its knowledge will be useful for future testing of drugs aimed at preventing brain edema formation. We studied the expression and cellular distribution of AQP1, 4 and 9 in the non-human primate brain. The distribution of AQP4 in the non-human primate brain was observed in perivascular astrocytes, comparable to the observation made in the rodent brain. In contrast with rodent, primate AQP1 is expressed in the processes and perivascular endfeet of a subtype of astrocytes mainly located in the white matter and the glia limitans, possibly involved in water homeostasis. AQP1 was also observed in neurons innervating the pial blood vessels, suggesting a possible role in cerebral blood flow regulation. As described in rodent, AQP9 mRNA and protein were detected in astrocytes and in catecholaminergic neurons. However additional locations were observed for AQP9 in populations of neurons located in several cortical areas of primate brains. This report describes a detailed study of AQP1, 4 and 9 distributions in the non-human primate brain, which adds to the data already published in rodent brains. This relevant species differences have to be considered carefully to assess potential drugs acting on AQPs non-human primate models before entering human clinical trials.

Training in flexible intensive insulin therapy improves quality of life, decreases the risk of hypoglycaemia and ameliorates poor metabolic control in patients with type 1 diabetes.

AIM: Intensified insulin therapy has evolved to be the standard treatment of type 1 diabetes. However, it has been reported to increase significantly the risk of hypoglycaemia. We studied the effect of structured group teaching courses in flexible insulin therapy (FIT) on psychological and metabolic parameters in patients with type 1 diabetes. METHODS: We prospectively followed 45 type 1 diabetic patients of our outpatient clinic participating in 5 consecutive FIT teaching courses at the University Hospital of Basel. These courses consist of 7 weekly ambulatory evening group sessions. Patients were studied before and 1, 6, and 18 months after the course. Main outcome measures were glycated haemoglobin (HbA1c), severe hypoglycaemic events, quality of life (DQoL), diabetes self-control (IPC-9) and diabetes knowledge (DWT). RESULTS: Quality of life, self-control and diabetes knowledge improved after the FIT courses (all p<0.001). The frequency of severe hypoglycaemic events decreased ten-fold from 0.33 episodes/6 months at baseline to 0.03 episodes/6 months after 18 months (p<0.05). Baseline HbA1c was 7.2+/-1.1% and decreased in the subgroup with HbA1c > or = 8% from 8.4% to 7.8% (p<0.05). CONCLUSIONS: In an unselected, but relatively well-controlled population of type 1 diabetes, a structured, but not very time consuming FIT teaching programme in the outpatient setting improves psychological well-being and metabolic parameters.

Comparison of the polynomial model against explicit measurements of noise components for different mammography systems.

Given the adverse impact of image noise on the perception of important clinical details in digital mammography, routine quality control measurements should include an evaluation of noise. The European Guidelines, for example, employ a second-order polynomial fit of pixel variance as a function of detector air kerma (DAK) to decompose noise into quantum, electronic and fixed pattern (FP) components and assess the DAK range where quantum noise dominates. This work examines the robustness of the polynomial method against an explicit noise decomposition method. The two methods were applied to variance and noise power spectrum (NPS) data from six digital mammography units. Twenty homogeneously exposed images were acquired with PMMA blocks for target DAKs ranging from 6.25 to 1600 µGy. Both methods were explored for the effects of data weighting and squared fit coefficients during the curve fitting, the influence of the additional filter material (2 mm Al versus 40 mm PMMA) and noise de-trending. Finally, spatial stationarity of noise was assessed.Data weighting improved noise model fitting over large DAK ranges, especially at low detector exposures. The polynomial and explicit decompositions generally agreed for quantum and electronic noise but FP noise fraction was consistently underestimated by the polynomial method. Noise decomposition as a function of position in the image showed limited noise stationarity, especially for FP noise; thus the position of the region of interest (ROI) used for noise decomposition may influence fractional noise composition. The ROI area and position used in the Guidelines offer an acceptable estimation of noise components. While there are limitations to the polynomial model, when used with care and with appropriate data weighting, the method offers a simple and robust means of examining the detector noise components as a function of detector exposure.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

A review of methods for assessment of coronary microvascular disease in both clinical and experimental settings.

Obstructive disease of the large coronary arteries is the prominent cause for angina pectoris. However, angina may also occur in the absence of significant coronary atherosclerosis or coronary artery spasm, especially in women. Myocardial ischaemia in these patients is often associated with abnormalities of the coronary microcirculation and may thus represent a manifestation of coronary microvascular disease (CMD). Elucidation of the role of the microvasculature in the genesis of myocardial ischaemia and cardiac damage-in the presence or absence of obstructive coronary atherosclerosis-will certainly result in more rational diagnostic and therapeutic interventions for patients with ischaemic heart disease. Specifically targeted research based on improved assessment modalities is needed to improve the diagnosis of CMD and to translate current molecular, cellular, and physiological knowledge into new therapeutic options.

Biological monitoring of chemical exposure : toxicokinetic differences due to age and sex

Human biomonitoring is a widely used method in the assessment of occupational exposure to chemical substances and recommended biological limits are published periodically for interpretation and decision-making. However, it is increasingly recognized that a large variability is associated with biological monitoring, making interpretation less efficient than assumed. In order to improve the applicability of biological monitoring, specific factors responsible for this variability should be identified and their contribution quantified. Among these factors, age and sex are easily identifiable, and present knowledge about pharmaceutical chemicals suggests that they play an important role on the toxicokinetics of occupational chemical agents, and therefore on the biological monitoring results.The aim of the present research project was to assess the influence of age and sex on biological indicators corresponding to organic solvents. This has been done experimentally and by toxicokinetic computer simulation. Another purpose was to explore the effect of selected CYP2E1 polymorphisms on the toxicokinetic profile.Age differences were identified by numerical simulations using a general toxicokinetic model from a previous study which was applied to 14 chemicals, representing 21 specific biological entities, with, among others, toluene, phenol, lead and mercury. These models were runn with the modified parameters, indicating in some cases important differences due to age. The expected changes are mostly of the order of 10-20 %, but differences up to 50 % were observed in some cases. These differences appear to depend on the chemical and on the biological entity considered.Sex differences were quantified by controlled human exposures, which were carried out in a 12 m3 exposure chamber for three organic solvents separately: methyl ethyl ketone, 1-methoxy-2-propanol and 1,1,1-trichloroethane. The human volunteer groups were composed 12 of ten young men and fifteen young women, the latter subdivided into those with and without hormonal contraceptive. They were exposed during six hours at rest and at half of the threshold limit value. The kinetics of the parent compounds (organic volatiles) and their metabolite(s) were followed in blood, urine and expired air over time. Analyses of the solvent and their metabolites were performed by using headspace gas chromatography, CYP2E1 genotypes by using PCR-based RFLP methods. Experimental data were used to calibrate the toxicokinetic models developed for the three solvents. The results obtained for the different biomarkers of exposure mainly showed an effect on the urinary levels of several biomarkers among women due to the use of hormonal contraceptive, with an increase of about 50 % in the metabolism rate. The results also showed a difference due to the genotype CYP2E1*6, when exposed to methyl ethyl ketone, with a tendency to increase CYP2E1 activity when volunteers were carriers of the mutant allele. Simulations showed that it is possible to use simple toxicokinetic tools in order to predict internal exposure when exposed to organic solvents. Our study suggests that not only physiological differences but also exogenous sex hormones could influence CYP2E1 enzyme activity. The variability among the urinary biological indicators levels gives evidence of an interindividual susceptibility, an aspect that should have its place in the approaches for setting limits of occupational exposure.

The evolution, maintenance and adaptive function of genetic colour polymorphism in birds.

The hypothesis that ornaments can honestly signal quality only if their expression is condition-dependent has dominated the study of the evolution and function of colour traits. Much less interest has been devoted to the adaptive function of colour traits for which the expression is not, or is to a low extent, sensitive to body condition and the environment in which individuals live. The aim of the present paper is to review the current theoretical and empirical knowledge of the evolution, maintenance and adaptive function of colour plumage traits for which the expression is mainly under genetic control. The finding that in many bird species the inheritance of colour morphs follows the laws of Mendel indicates that genetic colour polymorphism is frequent. Polymorphism may have evolved or be maintained because each colour morph facilitates the exploitation of alternative ecological niches as suggested by the observation that individuals are not randomly distributed among habitats with respect to coloration. Consistent with the hypothesis that different colour morphs are linked to alternative strategies is the finding that in a majority of species polymorphism is associated with reproductive parameters, and behavioural, life-history and physiological traits. Experimental studies showed that such covariations can have a genetic basis. These observations suggest that colour polymorphism has an adaptive function. Aviary and field experiments demonstrated that colour polymorphism is used as a criterion in mate-choice decisions and dominance interactions confirming the claim that conspecifics assess each other's colour morphs. The factors favouring the evolution and maintenance of genetic variation in coloration are reviewed, but empirical data are virtually lacking to assess their importance. Although current theory predicts that only condition-dependent traits can signal quality, the present review shows that genetically inherited morphs can reveal the same qualities. The study of genetic colour polymorphism will provide important and original insights on the adaptive function of conspicuous traits.

PROX1 Promotes Metabolic Adaptation and Fuels Outgrowth of Wnt(high) Metastatic Colon Cancer Cells.

The Wnt pathway is abnormally activated in the majority of colorectal cancers, and significant knowledge has been gained in understanding its role in tumor initiation. However, the mechanisms of metastatic outgrowth in colorectal cancer remain a major challenge. We report that autophagy-dependent metabolic adaptation and survival of metastatic colorectal cancer cells is regulated by the target of oncogenic Wnt signaling, homeobox transcription factor PROX1, expressed by a subpopulation of colon cancer progenitor/stem cells. We identify direct PROX1 target genes and show that repression of a pro-apoptotic member of the BCL2 family, BCL2L15, is important for survival of PROX1(+) cells under metabolic stress. PROX1 inactivation after the establishment of metastases prevented further growth of lesions. Furthermore, autophagy inhibition efficiently targeted metastatic PROX1(+) cells, suggesting a potential therapeutic approach. These data identify PROX1 as a key regulator of the transcriptional network contributing to metastases outgrowth in colorectal cancer.