Multimodal Highlighting of Structural Abnormalities in Diabetic Rat and Human Corneas.

PURPOSE: This study aimed to highlight structural corneal changes in a model of type 2 diabetes, using in vivo corneal confocal microscopy (CCM). The abnormalities were also characterized by transmission electron microscopy (TEM) and second harmonic generation (SHG) microscopy in rat and human corneas. METHODS: Goto-Kakizaki (GK) rats were observed at age 12 weeks (n = 3) and 1 year (n = 6), and compared to age-matched controls. After in vivo CCM examination, TEM and SHG microscopy were used to characterize the ultrastructure and the three-dimensional organization of the abnormalities. Human corneas from diabetic (n = 3) and nondiabetic (n = 3) patients were also included in the study. RESULTS: In the basal epithelium of GK rats, CCM revealed focal hyper-reflective areas, and histology showed proliferative cells with irregular basement membrane. In the anterior stroma, extracellular matrix modifications were detected by CCM and confirmed in histology. In the Descemet's membrane periphery of all the diabetic corneas, hyper-reflective deposits were highlighted using CCM and characterized as long-spacing collagen fibrils by TEM. SHG microscopy revealed these deposits with high contrast, allowing specific detection in diabetic human and rat corneas without preparation and characterization of their three-dimensional organization. CONCLUSION: Pathologic findings were observed early in the development of diabetes in GK rats. Similar abnormalities have been found in corneas from diabetic patients. TRANSLATIONAL RELEVANCE: This multidisciplinary study highlights diabetes-induced corneal abnormalities in an animal model, but also in diabetic donors. This could constitute a potential early marker for diagnosis of hyperglycemia-induced tissue changes.

Biomechanical characterization and in vitro mechanical injury of elderly human femoral head cartilage: comparison to adult bovine humeral head cartilage.

OBJECTIVES: In vitro mechanical injury of articular cartilage is useful to identify events associated with development of post-traumatic osteoarthritis (OA). To date, many in vitro injury models have used animal cartilage despite the greater clinical relevance of human cartilage. We aimed to characterize a new in vitro injury model using elderly human femoral head cartilage and compare its behavior to that of an existing model with adult bovine humeral head cartilage. DESIGN: Mechanical properties of human and bovine cartilage disks were characterized by elastic modulus and hydraulic permeability in radially confined axial compression, and by Young's modulus, Poisson's ratio, and direction-dependent radial strain in unconfined compression. Biochemical composition was assessed in terms of tissue water, solid, and glycosaminoglycan (GAG) contents. Responses to mechanical injury were assessed by observation of macroscopic superficial tissue cracks and histological measurements of cell viability following single injurious ramp loads at 7 or 70%/s strain rate to 3 or 14 MPa peak stress. RESULTS: Confined compression moduli and Young's moduli were greater in elderly human femoral cartilage vs adult bovine humeral cartilage whereas hydraulic permeability was less. Radial deformations of axially compressed explant disks were more anisotropic (direction-dependent) for the human cartilage. In both cartilage sources, tissue cracking and associated cell death during injurious loading was common for 14 MPa peak stress at both strain rates. CONCLUSION: Despite differences in mechanical properties, acute damage induced by injurious loading was similar in both elderly human femoral cartilage and adult bovine humeral cartilage, supporting the clinical relevance of animal-based cartilage injury models. However, inherent structural differences such as cell density may influence subsequent cell-mediated responses to injurious loading and affect the development of OA.

Molecular and functional characterization of a novel cardiac-specific human tropomyosin isoform.

BACKGROUND: Tropomyosin (TM), an essential actin-binding protein, is central to the control of calcium-regulated striated muscle contraction. Although TPM1alpha (also called alpha-TM) is the predominant TM isoform in human hearts, the precise TM isoform composition remains unclear. METHODS AND RESULTS: In this study, we quantified for the first time the levels of striated muscle TM isoforms in human heart, including a novel isoform called TPM1kappa. By developing a TPM1kappa-specific antibody, we found that the TPM1kappa protein is expressed and incorporated into organized myofibrils in hearts and that its level is increased in human dilated cardiomyopathy and heart failure. To investigate the role of TPM1kappa in sarcomeric function, we generated transgenic mice overexpressing cardiac-specific TPM1kappa. Incorporation of increased levels of TPM1kappa protein in myofilaments leads to dilated cardiomyopathy. Physiological alterations include decreased fractional shortening, systolic and diastolic dysfunction, and decreased myofilament calcium sensitivity with no change in maximum developed tension. Additional biophysical studies demonstrate less structural stability and weaker actin-binding affinity of TPM1kappa compared with TPM1alpha. CONCLUSIONS: This functional analysis of TPM1kappa provides a possible mechanism for the consequences of the TM isoform switch observed in dilated cardiomyopathy and heart failure patients.

Structure-function characterization and optimization of a plant-derived antibacterial peptide.

Crushed seeds of the Moringa oleifera tree have been used traditionally as natural flocculants to clarify drinking water. We previously showed that one of the seed peptides mediates both the sedimentation of suspended particles such as bacterial cells and a direct bactericidal activity, raising the possibility that the two activities might be related. In this study, the conformational modeling of the peptide was coupled to a functional analysis of synthetic derivatives. This indicated that partly overlapping structural determinants mediate the sedimentation and antibacterial activities. Sedimentation requires a positively charged, glutamine-rich portion of the peptide that aggregates bacterial cells. The bactericidal activity was localized to a sequence prone to form a helix-loop-helix structural motif. Amino acid substitution showed that the bactericidal activity requires hydrophobic proline residues within the protruding loop. Vital dye staining indicated that treatment with peptides containing this motif results in bacterial membrane damage. Assembly of multiple copies of this structural motif into a branched peptide enhanced antibacterial activity, since low concentrations effectively kill bacteria such as Pseudomonas aeruginosa and Streptococcus pyogenes without displaying a toxic effect on human red blood cells. This study thus identifies a synthetic peptide with potent antibacterial activity against specific human pathogens. It also suggests partly distinct molecular mechanisms for each activity. Sedimentation may result from coupled flocculation and coagulation effects, while the bactericidal activity would require bacterial membrane destabilization by a hydrophobic loop.

Isolation and characterization of major histocompatibility complex (MHC) class II B genes in the Barn owl (Aves: Tyto alba)

We isolated major histocompatibility complex class II B (MHCIIB) genes in the Barn owl (Tyto alba). A PCR-based approach combined with primer walking on genomic and complementary DNA as well as Southern blot analyses revealed the presence of two MHCIIB genes, both being expressed in spleen, liver, and blood. Characteristic structural features of MHCIIB genes as well as their expression and high non-synonymous substitution rates in the region involved in antigen binding suggest that both genes are functional. MHC organization in the Barn owl is simple compared to passerine species that show multiple duplications, and resembles the minimal essential MHC of chicken.

Ex vivo characterization of allo-MHC-restricted T cells specific for a single MHC-peptide complex.

Alloreactive T cells are thought to be a potentially rich source of high-avidity T cells with therapeutic potential since tolerance to self-Ags is restricted to self-MHC recognition. Given the particularly high frequency of alloreactive T cells in the peripheral immune system, we used numerous MHC class I multimers to directly visualize and isolate viral and tumor Ag-specific alloreactive CD8 T cells. In fact, all but one specificities screened were undetectable in ex vivo labeling. In this study, we report the occurrence of CD8 T cells specifically labeled with allo-HLA-A*0201/Melan-A/MART-1(26-35) multimers at frequencies that are in the range of 10(-4) CD8 T cells and are thus detectable ex vivo by flow cytometry. We report the thymic generation and shaping of tumor Ag-specific, alloreactive T cells as well as their fate once seeded in the periphery. We show that these cells resemble their counterparts in HLA-A*0201-positive individuals, based on their structural and functional attributes.

Characterization of gravitational rock slope deformations at different spatial scales based on field, remote sensing and numerical approaches

Rock slope instabilities such as rock slides, rock avalanche or deep-seated gravitational slope deformations are widespread in Alpine valleys. These phenomena represent at the same time a main factor that control the mountain belts erosion and also a significant natural hazard that creates important losses to the mountain communities. However, the potential geometrical and dynamic connections linking outcrop and slope-scale instabilities are often unknown. A more detailed definition of the potential links will be essential to improve the comprehension of the destabilization processes and to dispose of a more complete hazard characterization of the rock instabilities at different spatial scales. In order to propose an integrated approach in the study of the rock slope instabilities, three main themes were analysed in this PhD thesis: (1) the inventory and the spatial distribution of rock slope deformations at regional scale and their influence on the landscape evolution, (2) the influence of brittle and ductile tectonic structures on rock slope instabilities development and (3) the characterization of hazard posed by potential rock slope instabilities through the development of conceptual instability models. To prose and integrated approach for the analyses of these topics, several techniques were adopted. In particular, high resolution digital elevation models revealed to be fundamental tools that were employed during the different stages of the rock slope instability assessment. A special attention was spent in the application of digital elevation model for detailed geometrical modelling of past and potential instabilities and for the rock slope monitoring at different spatial scales. Detailed field analyses and numerical models were performed to complete and verify the remote sensing approach. In the first part of this thesis, large slope instabilities in Rhone valley (Switzerland) were mapped in order to dispose of a first overview of tectonic and climatic factors influencing their distribution and their characteristics. Our analyses demonstrate the key influence of neotectonic activity and the glacial conditioning on the spatial distribution of the rock slope deformations. Besides, the volumes of rock instabilities identified along the main Rhone valley, were then used to propose the first estimate of the postglacial denudation and filling of the Rhone valley associated to large gravitational movements. In the second part of the thesis, detailed structural analyses of the Frank slide and the Sierre rock avalanche were performed to characterize the influence of brittle and ductile tectonic structures on the geometry and on the failure mechanism of large instabilities. Our observations indicated that the geometric characteristics and the variation of the rock mass quality associated to ductile tectonic structures, that are often ignored landslide study, represent important factors that can drastically influence the extension and the failure mechanism of rock slope instabilities. In the last part of the thesis, the failure mechanisms and the hazard associated to five potential instabilities were analysed in detail. These case studies clearly highlighted the importance to incorporate different analyses and monitoring techniques to dispose of reliable and hazard scenarios. This information associated to the development of a conceptual instability model represents the primary data for an integrated risk management of rock slope instabilities. - Les mouvements de versant tels que les chutes de blocs, les éboulements ou encore les phénomènes plus lents comme les déformations gravitaires profondes de versant représentent des manifestations courantes en régions montagneuses. Les mouvements de versant sont à la fois un des facteurs principaux contrôlant la destruction progressive des chaines orogéniques mais aussi un danger naturel concret qui peut provoquer des dommages importants. Pourtant, les phénomènes gravitaires sont rarement analysés dans leur globalité et les rapports géométriques et mécaniques qui lient les instabilités à l'échelle du versant aux instabilités locales restent encore mal définis. Une meilleure caractérisation de ces liens pourrait pourtant représenter un apport substantiel dans la compréhension des processus de déstabilisation des versants et améliorer la caractérisation des dangers gravitaires à toutes les échelles spatiales. Dans le but de proposer un approche plus globale à la problématique des mouvements gravitaires, ce travail de thèse propose trois axes de recherche principaux: (1) l'inventaire et l'analyse de la distribution spatiale des grandes instabilités rocheuses à l'échelle régionale, (2) l'analyse des structures tectoniques cassantes et ductiles en relation avec les mécanismes de rupture des grandes instabilités rocheuses et (3) la caractérisation des aléas rocheux par une approche multidisciplinaire visant à développer un modèle conceptuel de l'instabilité et une meilleure appréciation du danger . Pour analyser les différentes problématiques traitées dans cette thèse, différentes techniques ont été utilisées. En particulier, le modèle numérique de terrain s'est révélé être un outil indispensable pour la majorité des analyses effectuées, en partant de l'identification de l'instabilité jusqu'au suivi des mouvements. Les analyses de terrain et des modélisations numériques ont ensuite permis de compléter les informations issues du modèle numérique de terrain. Dans la première partie de cette thèse, les mouvements gravitaires rocheux dans la vallée du Rhône (Suisse) ont été cartographiés pour étudier leur répartition en fonction des variables géologiques et morphologiques régionales. En particulier, les analyses ont mis en évidence l'influence de l'activité néotectonique et des phases glaciaires sur la distribution des zones à forte densité d'instabilités rocheuses. Les volumes des instabilités rocheuses identifiées le long de la vallée principale ont été ensuite utilisés pour estimer le taux de dénudations postglaciaire et le remplissage de la vallée du Rhône lié aux grands mouvements gravitaires. Dans la deuxième partie, l'étude de l'agencement structural des avalanches rocheuses de Sierre (Suisse) et de Frank (Canada) a permis de mieux caractériser l'influence passive des structures tectoniques sur la géométrie des instabilités. En particulier, les structures issues d'une tectonique ductile, souvent ignorées dans l'étude des instabilités gravitaires, ont été identifiées comme des structures très importantes qui contrôlent les mécanismes de rupture des instabilités à différentes échelles. Dans la dernière partie de la thèse, cinq instabilités rocheuses différentes ont été étudiées par une approche multidisciplinaire visant à mieux caractériser l'aléa et à développer un modèle conceptuel trois dimensionnel de ces instabilités. A l'aide de ces analyses on a pu mettre en évidence la nécessité d'incorporer différentes techniques d'analyses et de surveillance pour une gestion plus objective du risque associée aux grandes instabilités rocheuses.

Zonation for 3D aquifer characterization based on joint inversions of multimethod crosshole geophysical data

Predictive groundwater modeling requires accurate information about aquifer characteristics. Geophysical imaging is a powerful tool for delineating aquifer properties at an appropriate scale and resolution, but it suffers from problems of ambiguity. One way to overcome such limitations is to adopt a simultaneous multitechnique inversion strategy. We have developed a methodology for aquifer characterization based on structural joint inversion of multiple geophysical data sets followed by clustering to form zones and subsequent inversion for zonal parameters. Joint inversions based on cross-gradient structural constraints require less restrictive assumptions than, say, applying predefined petro-physical relationships and generally yield superior results. This approach has, for the first time, been applied to three geophysical data types in three dimensions. A classification scheme using maximum likelihood estimation is used to determine the parameters of a Gaussian mixture model that defines zonal geometries from joint-inversion tomograms. The resulting zones are used to estimate representative geophysical parameters of each zone, which are then used for field-scale petrophysical analysis. A synthetic study demonstrated how joint inversion of seismic and radar traveltimes and electrical resistance tomography (ERT) data greatly reduces misclassification of zones (down from 21.3% to 3.7%) and improves the accuracy of retrieved zonal parameters (from 1.8% to 0.3%) compared to individual inversions. We applied our scheme to a data set collected in northeastern Switzerland to delineate lithologic subunits within a gravel aquifer. The inversion models resolve three principal subhorizontal units along with some important 3D heterogeneity. Petro-physical analysis of the zonal parameters indicated approximately 30% variation in porosity within the gravel aquifer and an increasing fraction of finer sediments with depth.

Biophysical characterization of two different stable misfolded monomeric polypeptides that are chaperone-amenable substrates.

Misfolded polypeptide monomers may be regarded as the initial species of many protein aggregation pathways, which could accordingly serve as primary targets for molecular chaperones. It is therefore of paramount importance to study the cellular mechanisms that can prevent misfolded monomers from entering the toxic aggregation pathway and moreover rehabilitate them into active proteins. Here, we produced two stable misfolded monomers of luciferase and rhodanese, which we found to be differently processed by the Hsp70 chaperone machinery and whose conformational properties were investigated by biophysical approaches. In spite of their monomeric nature, they displayed enhanced thioflavin T fluorescence, non-native β-sheets, and tertiary structures with surface-accessible hydrophobic patches, but differed in their conformational stability and aggregation propensity. Interestingly, minor structural differences between the two misfolded species could account for their markedly different behavior in chaperone-mediated unfolding/refolding assays. Indeed, only a single DnaK molecule was sufficient to unfold by direct clamping a misfolded luciferase monomer, while, by contrast, several DnaK molecules were necessary to unfold the more resistant misfolded rhodanese monomer by a combination of direct clamping and cooperative entropic pulling.

Constraining 3-D electrical resistance tomography with GPR reflection data forimproved aquifer characterization

Surface-based ground penetrating radar (GPR) and electrical resistance tomography (ERT) are common tools for aquifer characterization, because both methods provide data that are sensitive to hydrogeologically relevant quantities. To retrieve bulk subsurface properties at high resolution, we suggest incorporating structural information derived from GPR reflection data when inverting surface ERT data. This reduces resolution limitations, which might hinder quantitative interpretations. Surface-based GPR reflection and ERT data have been recorded on an exposed gravel bar within a restored section of a previously channelized river in northeastern Switzerland to characterize an underlying gravel aquifer. The GPR reflection data acquired over an area of 240×40 m map the aquifer's thickness and two internal sub-horizontal regions with different depositional patterns. The interface between these two regions and the boundary of the aquifer with then underlying clay are incorporated in an unstructured ERT mesh. Subsequent inversions are performed without applying smoothness constraints across these boundaries. Inversion models obtained by using these structural constraints contain subtle resistivity variations within the aquifer that are hardly visible in standard inversion models as a result of strong vertical smearing in the latter. In the upper aquifer region, with high GPR coherency and horizontal layering, the resistivity is moderately high (N300 Ωm). We suggest that this region consists of sediments that were rearranged during more than a century of channelized flow. In the lower low coherency region, the GPR image reveals fluvial features (e.g., foresets) and generally more heterogeneous deposits. In this region, the resistivity is lower (~200 Ωm), which we attribute to increased amounts of fines in some of the well-sorted fluvial deposits. We also find elongated conductive anomalies that correspond to the location of river embankments that were removed in 2002.

Inversion of multiple intersecting high-resolution crosshole GPR profiles for hydrological characterization at the Boise Hydrogeophysical Research Site

The integration of geophysical data into the subsurface characterization problem has been shown in many cases to significantly improve hydrological knowledge by providing information at spatial scales and locations that is unattainable using conventional hydrological measurement techniques. In particular, crosshole ground-penetrating radar (GPR) tomography has shown much promise in hydrology because of its ability to provide highly detailed images of subsurface radar wave velocity, which is strongly linked to soil water content. Here, we develop and demonstrate a procedure for inverting together multiple crosshole GPR data sets in order to characterize the spatial distribution of radar wave velocity below the water table at the Boise Hydrogeophysical Research Site (BHRS) near Boise, Idaho, USA. Specifically, we jointly invert 31 intersecting crosshole GPR profiles to obtain a highly resolved and consistent radar velocity model along the various profile directions. The model is found to be strongly correlated with complementary neutron porosity-log data and is further corroborated by larger-scale structural information at the BHRS. This work is an important prerequisite to using crosshole GPR data together with existing hydrological measurements for improved groundwater flow and contaminant transport modeling.

Simulated-annealing-based conditional simulation for the local-scale characterization of heterogeneous aquifers

Simulated-annealing-based conditional simulations provide a flexible means of quantitatively integrating diverse types of subsurface data. Although such techniques are being increasingly used in hydrocarbon reservoir characterization studies, their potential in environmental, engineering and hydrological investigations is still largely unexploited. Here, we introduce a novel simulated annealing (SA) algorithm geared towards the integration of high-resolution geophysical and hydrological data which, compared to more conventional approaches, provides significant advancements in the way that large-scale structural information in the geophysical data is accounted for. Model perturbations in the annealing procedure are made by drawing from a probability distribution for the target parameter conditioned to the geophysical data. This is the only place where geophysical information is utilized in our algorithm, which is in marked contrast to other approaches where model perturbations are made through the swapping of values in the simulation grid and agreement with soft data is enforced through a correlation coefficient constraint. Another major feature of our algorithm is the way in which available geostatistical information is utilized. Instead of constraining realizations to match a parametric target covariance model over a wide range of spatial lags, we constrain the realizations only at smaller lags where the available geophysical data cannot provide enough information. Thus we allow the larger-scale subsurface features resolved by the geophysical data to have much more due control on the output realizations. Further, since the only component of the SA objective function required in our approach is a covariance constraint at small lags, our method has improved convergence and computational efficiency over more traditional methods. Here, we present the results of applying our algorithm to the integration of porosity log and tomographic crosshole georadar data to generate stochastic realizations of the local-scale porosity structure. Our procedure is first tested on a synthetic data set, and then applied to data collected at the Boise Hydrogeophysical Research Site.

Characterization of polyphosphate synthesis by isolated yeast vacuoles

Polyphosphate (iPOP) is a linear polymer of orthophosphate units linked together by high energy phosphoanhydride bonds. It is found in all organisms, localized in organelles called acidocalcisomes and ranges from a few to few hundred monomers in length. iPOP has been found to play a vast array of roles in all organisms, including phosphate and energy metabolism, regulation of enzymes, virulence, pathogenicity, bone remodelling and blood clotting, among many others. Recently it was found that iPOP levels were increased in myeloma cells. The growing interest in iPOP in human cell lines makes it an interesting molecule to study. However, not much is known about its metabolism in eukaryotes. Acidocalcisomes are electron dense, acidic organelles that belong to the group of Lysosome Related Organelles (LROs). The conservation of acidocalcisomes among all kingdoms of life is suggestive of their important roles for the organisms. However, they are difficult to analyse because of limited biochemical tools for investigation. Yeast vacuoles present remarkable similarities to acidocalcisomes in terms of their physiological and structural features, including synthesis and storage of iPOP, which make them an ideal candidate to study biological processes which are shared between vacuoles and acidocalcisomes. The availability of tools for genetic manipulation and isolation of vacuoles makes yeast a candidate of choice for the characterization of iPOP synthesis in eukaryotes. Our group has identified the Vacuolar Transporter Chaperone (VTC) complex as iPOP polymerase and identified the catalytic subunit (Vtc4). The goal of my study was to characterize the process of iPOP synthesis by isolated vacuoles and to reconstitute iPOP synthesis in liposomes. The first step was to develop a method for monitoring iPOP by isolated vacuoles over time and comparing it with previously known methods. Next, a detailed characterization was performed to determine the modulators of the process, both for intact as well as solubilized vacuoles. Finally, attempts were made to purify the VTC complex and reconstitute it in liposomes. A parallel line of study was the translocation and storage of synthesized iPOP in the lumen of the vacuoles. As a result of this study, it is possible to determine distinct pools of iPOP- inside and outside the vacuolar lumen. Additionally, I establish that the vacuolar lysate withstands harsh steps during reconstitution on liposomes and retains iPOP synthesizing activity. The next steps will be purification of the intact VTC complex and its structure determination by cryo-electron microscopy. - Les organismes vivants sont composés d'une ou plusieurs cellules responsables des processus biologiques élémentaires tels que la digestion, la respiration, la synthèse et la reproduction. Leur environnement interne est en équilibre et ils réalisent un très grand nombre de réactions chimiques et biochimiques pour maintenir cet équilibre. A différents compartiments cellulaires, ou organelles, sont attribuées des tâches spécifiques pour maintenir les cellules en vie. L'étude de ces fonctions permet une meilleure compréhension de la vie et des organismes vivants. De nombreux processus sont bien connus et caractérisés mais d'autres nécessitent encore des investigations détaillées. L'un de ces processus est le métabolisme des polyphosphates. Ces molécules sont des polymères linéaires de phosphate inorganique dont la taille peut varier de quelques dizaines à quelques centaines d'unités élémentaires. Ils sont présents dans tous les organismes, des bactéries à l'homme. Ils sont localisés principalement dans des compartiments cellulaires appelés acidocalcisomes, des organelles acides observés en microscopie électronique comme des structures denses aux électrons. Les polyphosphates jouent un rôle important dans le stockage et le métabolisme de l'énergie, la réponse au stress, la virulence, la pathogénicité et la résistance aux drogues. Chez l'homme, ils sont impliqués dans la coagulation du sang et le remodelage osseux. De nouvelles fonctions biologiques des polyphosphates sont encore découvertes, ce qui accroît l'intérêt des chercheurs pour ces molécules. Bien que des progrès considérables ont été réalisés afin de comprendre la fonction des polyphosphates chez les bactéries, ce qui concerne la synthèse, le stockage et la dégradation des polyphosphates chez les eucaryotes est mal connu. Les vacuoles de la levure Saccharomyces cerevisiae sont similaires aux acidocalcisomes des organismes supérieurs en termes de structure et de fonction. Les acidocalcisomes sont difficiles à étudier car il n'existe que peu d'outils génétiques et biochimiques qui permettent leur caractérisation. En revanche, les vacuoles peuvent être aisément isolées des cellules vivantes et manipulées génétiquement. Les vacuoles comme les acidocalcisomes synthétisent et stockent les polyphosphates. Ainsi, les découvertes faites grâce aux vacuoles de levures peuvent être extrapolées aux acidocalcisomes des organismes supérieurs. Le but de mon projet était de caractériser la synthèse des polyphosphates par des vacuoles isolées. Au cours de mon travail de thèse, j'ai mis au point une méthode de mesure de la synthèse des polyphosphates par des organelles purifés. Ensuite, j'ai identifié des composés qui modulent la réaction enzymatique lorsque celle-ci a lieu dans la vacuole ou après solubilisation de l'organelle. J'ai ainsi pu mettre en évidence deux groupes distincts de polyphosphates dans le système : ceux au-dehors de la vacuole et ceux en-dedans de l'organelle. Cette observation suggère donc très fortement que les vacuoles non seulement synthétisent les polyphosphates mais aussi transfère les molécules synthétisées de l'extérieur vers l'intérieur de l'organelle. Il est très vraisemblable que les vacuoles régulent le renouvellement des polyphosphates qu'elles conservent, en réponse à des signaux cellulaires. Des essais de purification de l'enzyme synthétisant les polyphosphates ainsi que sa reconstitution dans des liposomes ont également été entrepris. Ainsi, mon travail présente de nouveaux aspects de la synthèse des polyphosphates chez les eucaryotes et les résultats devraient encourager l'élucidation de mécanismes similaires chez les organismes supérieurs. - Les polyphosphates (iPOP) sont des polymères linéaires de phosphates inorganiques liés par des liaisons phosphoanhydres de haute énergie. Ces molécules sont présentes dans tous les organismes et localisées dans des compartiments cellulaires appelés acidocalcisomes. Elles varient en taille de quelques dizaines à quelques centaines d'unités phosphate. Des fonctions nombreuses et variées ont été attribuées aux iPOP dont un rôle dans les métabolismes de l'énergie et du phosphate, dans la régulation d'activités enzymatiques, la virulence, la pathogénicité, le remodelage osseux et la coagulation sanguine. Il a récemment été montré que les cellules de myélome contiennent une grande quantité de iPOP. Il y donc un intérêt croissant pour les iPOP dans les lignées cellulaires humaines. Cependant, très peu d'informations sur le métabolisme des iPOP chez les eucaryotes sont disponibles. Les acidocalcisomes sont des compartiments acides et denses aux électrons. Ils font partie du groupe des organelles similaires aux lysosomes (LROs pour Lysosome Related Organelles). Le fait que les acidocalcisomes soient conservés dans tous les règnes du vivant montrent l'importance de ces compartiments pour les organismes. Cependant, l'analyse de ces organelles est rendue difficile par l'existence d'un nombre limité d'outils biochimiques permettant leur caractérisation. Les vacuoles de levures possèdent des aspects structuraux et physiologiques très similaires à ceux des acidocalcisomes. Par exemple, ils synthétisent et gardent en réserve les iPOP. Ceci fait des vacuoles de levure un modèle idéal pour l'étude de processus biologiques conservés chez les vacuoles et les acidocalcisomes. De plus, la levure est un organisme de choix pour l'étude de la synthèse des iPOP compte-tenu de l'existence de nombreux outils génétiques et la possibilité d'isoler des vacuoles fonctionnelles. Notre groupe a identifié le complexe VTC (Vacuole transporter Chaperone) comme étant responsable de la synthèse des iPOP et la sous-unité Vtc4p comme celle possédant l'activité catalytique. L'objectif de cette étude était de caractériser le processus de synthèse des iPOP en utilisant des vacuoles isolées et de reconstituer la synthèse des iPOP dans des liposomes. La première étape a consisté en la mise au point d'un dosage permettant la mesure de la quantité de iPOP synthétisés par les organelles isolés en fonction du temps. Cette nouvelle méthode a été comparée aux méthodes décrites précédemment dans la littérature. Ensuite, la caractérisation détaillée du processus a permis d'identifier des composés modulateurs de la réaction à la fois pour des vacuoles intactes et des vacuoles solubilisées. Enfin, des essais de purification du complexe VTC et sa reconstitution dans des liposomes ont été entrepris. De façon parallèle, une étude sur la translocation et le stockage des iPOP dans le lumen des vacuoles a été menée. Il a ainsi été possible de mettre en évidence différents groupes de iPOP : les iPOP localisés à l'intérieur et ceux localisés à l'extérieur des vacuoles isolées. De plus, nous avons observé que le lysat vacuolaire n'est pas détérioré par les étapes de reconstitution dans les liposomes et conserve l'activité de synthèse des iPOP. Les prochaines étapes consisteront en la purification du complexe intact et de la détermination de sa structure par cryo-microscopie électronique.

Structural Brain Connectivity in School-Age Preterm Infants Provides Evidence for Impaired Networks Relevant for Higher Order Cognitive Skills and Social Cognition.

Extreme prematurity and pregnancy conditions leading to intrauterine growth restriction (IUGR) affect thousands of newborns every year and increase their risk for poor higher order cognitive and social skills at school age. However, little is known about the brain structural basis of these disabilities. To compare the structural integrity of neural circuits between prematurely born controls and children born extreme preterm (EP) or with IUGR at school age, long-ranging and short-ranging connections were noninvasively mapped across cortical hemispheres by connection matrices derived from diffusion tensor tractography. Brain connectivity was modeled along fiber bundles connecting 83 brain regions by a weighted characterization of structural connectivity (SC). EP and IUGR subjects, when compared with controls, had decreased fractional anisotropy-weighted SC (FAw-SC) of cortico-basal ganglia-thalamo-cortical loop connections while cortico-cortical association connections showed both decreased and increased FAw-SC. FAw-SC strength of these connections was associated with poorer socio-cognitive performance in both EP and IUGR children.

Characterization of the HIV protease inhibitor Nelfinavir cellular targets

The HIV protease inhibitors (HIV-PIs) are among the most potent antiviral drugs for the HIV infection. Treatment of patients with HIV-PIs has been linked with development of side effects including dyslipidemia, lipodystrophy syndrome and cardiovascular complications. Moreover, these drugs have shown anti-tumoral activity in non-infected patients but little is known about the involved molecular mechanism for these off-target effects. Here we propose that the HIV-PI Nelfinavir could block a cellular protease thus causing the observed phenotypes. We firstly focus our attention on a cellular protein, DDI2, showing sequence and structural conservation with the HIV protease. We applied cellular and in vitro approaches to produce a correctly folded recombinant protein in order to investigate the presence of a proteolytic activity. Despite the fact that we could identify two techniques that can be applied to produce a folded recombinant DDI2, no proteolytic activity has been identified in the present study. However, we could observe that decreasing the DDI2 levels recapitulated some phenotype observed in presence of HIV-PIs, including the phosphorylation of the protein translation regulators eIF2a and eEF2. As an alternative approach to identify cellular targets for HIV-PIs, we applied a proteomic screening called Slice-SILAC. We focused our attention on the defective maturation of Lamin A, a member of the nuclear lamina, induced by the block of the cellular protease Zmpste24. We demonstrated that Nelfinavir induced accumulation of Prelamin A and nuclear shape defects and in addition caused presence of cytosolic DNA, probably due to TREX1 downregulation. We showed that these phenotypes correlated with activation of the AIM2 inflammasome and IL-lß release. These findings suggest that DDI2 and Zmpste24 are direct or indirect cellular targets for the HIV-PIs and indicate a possible role for these proteins in promoting off-target effects and anti¬tumoral activity observed in HIV-PI treated patients. -- Les inhibiteurs de la protéase du VIH (IP-VIH) sont parmi les médicaments antiviraux les plus efficaces pour l'infection par le VIH. Le traitement des patients avec les IP-VIH cause des effets secondaires comprenant la dyslipidémie, le syndrome de lipodystrophie et les complications cardio-vasculaires. De plus, ces médicaments ont montré une activité anti-tumorale chez les patients non infectés, toutefois le mécanisme moléculaire impliqué dans ces effets hors-cible reste inconnu. Nous proposons que l'IP-VIH Nelfinavir puisse bloquer une protéase cellulaire provoquant les phénotypes observés. De ce fait, nous avons concentré notre attention sur une protéine cellulaire, DDI2, qui possède une séquence et une structure proche de celle de la protéase du VIH. Nous avons appliqué des approches cellulaire et in vitro pour produire une protéine recombinante correctement repliée afin d'étudier son activité protéolytique. Malgré le fait que nous avons pu identifier deux techniques qui peuvent être appliquées pour produire une protéine DDI2 recombinante correctement repliée, aucune activité protéolytique n'a été identifiée dans la présente étude. De plus, nous avons pu observer que la réduction de DDI2 récapitule les phénotypes observé avec le IP-VIH, y compris les phosphorylations de eIF2a et eEF2, impliquées dans la régulation de la traduction protéique. Une approche alternative, appelée Slice-SILAC, a été utilisée afin d'identifier de nouvelles cibles cellulaires du Nelfinavir. Nous avons concentré notre attention sur la maturation défectueuse de la Lamine A, un membre de la lamine nucléaire, induite par l'inhibition de la protéase cellulaire Zmpste24. Nous avons démontré que le Nelfinavir induit une accumulation de Prélamine A déformant la membrane nucléaire et la présence d'ADN cytosolique, probablement en raison de la régulation négative de TREX1. Nous avons montré que ces phénotypes causent l'activation de l'inflammasome AIM2 et la sécrétion d'IL-lß. Ces résultats suggèrent que DDI2 et Zmpste24 sont des cibles cellulaires pour les IP-VIH et indiquent un possible rôle pour ces protéines dans l'apparition d'effets secondaires ainsi que dans l'activité anti-tumorale observée chez les patients traités avec les IP-VIH.