48 resultados para Sediment deposition
Resumo:
BACKGROUND: Plasmid DNA vaccination is a promising approach, but studies in non-human primates and humans failed to achieve protective immunity. To optimise this technology further with focus on pulmonary administration, we developed and evaluated an adjuvant-equipped DNA carrier system based on the biopolymer chitosan. In more detail, the uptake and accompanying immune response of adjuvant Pam3Cys (Toll-like receptor-1/2 agonist) decorated chitosan DNA nanoparticles (NP) were explored by using a three-dimensional (3D) cell culture model of the human epithelial barrier. Pam3Cys functionalised and non-functionalised chitosan DNA NP were sprayed by a microsprayer onto the surface of 3D cell cultures and uptake of NP by epithelial and immune cells (blood monocyte-derived dendritic cells (MDDC) and macrophages (MDM)) was visualised by confocal laser scanning microscopy. In addition, immune activation by TLR pathway was monitored by analysis of interleukin-8 and tumor necrosis factor-α secretions (ELISA). RESULTS: At first, a high uptake rate into antigen-presenting cells (MDDC: 16-17%; MDM: 68-75%) was obtained. Although no significant difference in uptake patterns was observed for Pam3Cys adjuvant functionalised and non-functionalised DNA NP, ELISA of interleukin-8 and tumor necrosis factor-α demonstrated clearly that Pam3Cys functionalisation elicited an overall higher immune response with the ranking of Pam3Cys chitosan DNA NPâeuro0/00>âeuro0/00chitosan DNA NPâeuro0/00=âeuro0/00DNA unloaded chitosan NPâeuro0/00>âeuro0/00control (culture medium). CONCLUSIONS: Chitosan-based DNA delivery enables uptake into abluminal MDDC, which are the most immune competent cells in the human lung for the induction of antigen-specific immunity. In addition, Pam3Cys adjuvant functionalisation of chitosan DNA NP enhances significantly an environment favoring recruitment of immune cells together with a Th1 associated (cellular) immune response due to elevated IL-8 and TNF-α levels. The latter renders this DNA delivery approach attractive for potential DNA vaccination against intracellular pathogens in the lung (e.g., Mycobacterium tuberculosis or influenza virus).
Resumo:
Prevention of acid mine drainage (AMD) in sulfide-containing tailings requires the identification of the geochemical processes and element pathways in the early stages of tailing deposition. However, analyses of recently deposited tailings in active tailings impoundments are scarce because mineralogical changes occur near the detection limits of many assays. This study shows that a detailed geochemical study which includes stable isotopes of water (delta H-2, delta O-18), dissolved sulfates (delta S-34, delta O-18) and hydrochernical parameter (pH, Eh, DOC, major and trace elements) from tailings samples taken at different depths in rainy and dry seasons allows the understanding of weathering (oxidation, dissolution, sorption, and desorption), water and element pathways, and mixing processes in active tailings impoundments. Fresh alkaline tailings (pH 9.2-10.2) from the Cu-Mo porphyry deposit in El Teniente, Chile had low carbonate (0.8-1.1 Wt-% CaCO3 equivalent) and sulfide concentrations (0.8-1.3 wt.%, mainly as pyrite). In the alkaline tailings water, Mo and Cu (up to 3.9 mg/L Mo and 0.016 mg/L Cu) were mobile as MoO42- and Cu (OH)(2)(0). During the flotation, tailings water reached equilibrium with gypsum (up to 738 mg/L Ca and 1765 mg/ L SO4). The delta S-34 VS. delta O-18 covariations of dissolved sulfate (2.3 to 4.5% delta S-34 and 4.1 to 6.0 % delta O-18) revealed the sulfate sources: the dissolution of primary sulfates (12.0 to 13.2%. delta S-34, 7.4 to 10.9%.delta O-18) and oxidation of primary sulfides (-6.7 to 1.7%. delta S-34). Sedimented tailings in the tailings impoundment can be divided into three layers with different water sources, element pathways, and geochemical processes. The deeper sediments (> 1 m depth) were infiltrated by catchment water, which partly replaced the original tailings water, especially during the winter season. This may have resulted in the change from alkaline to near-neutral pH and towards lower concentrations of most dissolved elements. The neutral pH and high DOC (up to 99.4 mg/L C) of the catchment water mobilized Cu (up to 0.25 mg/L) due to formation of organic Cu complexes; and Zn (up to 130 mg/L) due to dissolution of Zn oxides and desorption). At I m depth, tailings pore water obtained during the winter season was chemically and isotopically similar to fresh tailings water (pH 9.8-10.6, 26.7-35.5 mg/L Cl, 2.3-6.0 mg/L Mo). During the summer, a vadose zone evolved locally and temporarily up to 1.2 m depth. resulting in a higher concentration of dissolved solids in the pore water due to evaporation. During periodical new deposition of fresh tailings, the geochemistry of the surface layer was geochemically similar to fresh tailings. In periods without deposition, sulfide oxidation was suggested by decreasing pH (7.7-9.5), enrichment of MoO42- and SO42-, and changes in the isotopic composition of dissolved sulfates. Further enrichment for Na, K, Cl, SO4, Mg, Cu, and Mo (up to 23.8 mg/L Mo) resulted from capillary transport towards the surface followed by evaporation and the precipitation of highly soluble efflorescent salts (e.g., mirabilite, syngenite) at the tailing surface during summer. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
Following the introduction of single-metal deposition (SMD), a simplified fingermark detection technique based on multimetal deposition, optimization studies were conducted. The different parameters of the original formula were tested and the results were evaluated based on the contrast and overall aspect of the enhanced fingermarks. The new formula for SMD was found based on the most optimized parameters. Interestingly, it was found that important variations from the base parameters did not significantly affect the outcome of the enhancement, thus demonstrating that SMD is a very robust technique. Finally, a comparison of the optimized SMD with multi-metal deposition (MMD) was carried out on different surfaces. It was demonstrated that SMD produces comparable results to MMD, thus validating the technique.
Resumo:
The aim of this study was to assess the frequency and the outcome of patients suffering from rheumatoid arthritis in which calcium pyrophosphate dihydrate (CPPD) crystal deposits were found to coexist in synovial fluid analysis. Such association was more frequent than previously believed with CPPD crystals found in 25.8% of 93 patients with rheumatoid arthritis. As a group, a trend toward a worse outcome was suggested by more frequent prostheses of the lower limb.
Resumo:
OBJECTIVE: To test the hypothesis that calcium pyrophosphate dihydrate (CPPD) deposition disease is a risk factor for neck pain. METHODS: A prevalent case-control study was conducted to assess cervical calcifications and neck pain between patients with and without known peripheral CPPD deposition disease. CPPD cases were included if diagnosed with CPPD deposition disease of peripheral joints, and excluded if their chief complaint was neck pain. Controls were randomly selected among consecutive patients, hospitalized for conditions unrelated to CPPD deposition disease or neck pain, and matched to CPPD cases by age and sex. Cervical calcifications were assessed by lateral cervical radiographs and computed tomography scans of the upper cervical spine; neck pain and cervical function were appraised by a validated questionnaire. RESULTS: Cervical calcifications were found in 24 out of 35 patients (69%) in the CPPD group compared to 4 out of 35 patients (11%) in the control group (p < 0.001). Patients with CPPD deposition disease reported significantly more neck pain and discomfort than controls (p < 0.001), and were 5 times more likely to report any neck pain (odds ratio 5.5; 95% confidence interval: 1.9, 21.9). Among male patients, more extensive cervical calcified deposits correlated with more severe neck pain (rs = 0.58, p = 0.03). CONCLUSION: These results suggest that CPPD deposition disease frequently involves the cervical spine and may be associated with the development of neck pain.
Resumo:
Knowledge of the reflectivity of the sediment-covered seabed is of significant importance to marine seismic data acquisition and interpretation as it governs the generation of reverberations in the water layer. In this context pertinent, but largely unresolved, questions concern the importance of the typically very prominent vertical seismic velocity gradients as well as the potential presence and magnitude of anisotropy in soft surficial seabed sediments. To address these issues, we explore the seismic properties of granulometric end-member-type clastic sedimentary seabed models consisting of sand, silt, and clay as well as scale-invariant stochastic layer sequences of these components characterized by realistic vertical gradients of the P- and S-wave velocities. Using effective media theory, we then assess the nature and magnitude of seismic anisotropy associated with these models. Our results indicate that anisotropy is rather benign for P-waves, and that the S-wave velocities in the axial directions differ only slightly. Because of the very high P- to S-wave velocity ratios in the vicinity of the seabed our models nevertheless suggest that S-wave triplications may occur at very small incidence angles. To numerically evaluate the P-wave reflection coefficient of our seabed models, we apply a frequency-slowness technique to the corresponding synthetic seismic wavefields. Comparison with analytical plane-wave reflection coefficients calculated for corresponding isotropic elastic half-space models shows that the differences tend to be most pronounced in the vicinity of the elastic equivalent of the critical angle as well as in the post-critical range. We also find that the presence of intrinsic anisotropy in the clay component of our layered models tends to dramatically reduce the overall magnitude of the P-wave reflection coefficient as well as its variation with incidence angle.
Resumo:
Les laves torrentielles sont l'un des vecteurs majeurs de sédiments en milieu montagneux. Leur comportement hydrogéomorphologique est contrôlé par des facteurs géologique, géomorphologique, topographique, hydrologique, climatique et anthropique. Si, en Europe, la recherche s'est plus focalisée sur les aspects hydrologiques que géomorphologiques de ces phénomènes, l'identification des volumes de sédiments potentiellement mobilisables au sein de petits systèmes torrentiels et des processus responsables de leur transfert est d'une importance très grande en termes d'aménagement du territoire et de gestion des dangers naturels. De plus, une corrélation entre des événements pluviométriques et l'occurrence de laves torrentielles n'est pas toujours établie et de nombreux événements torrentiels semblent se déclencher lorsqu'un seuil géomorphologique intrinsèque (degré de remplissage du chenal) au cours d'eau est atteint.Une méthodologie pragmatique a été développée pour cartographier les stocks sédimentaires constituant une source de matériaux pour les laves torrentielles, comme outil préliminaire à la quantification des volumes transportés par ces phénomènes. La méthode s'appuie sur des données dérivées directement d'analyses en environnement SIG réalisées sur des modèles numériques d'altitude de haute précision, de mesures de terrain et d'interprétation de photographies aériennes. La méthode a été conçue pour évaluer la dynamique des transferts sédimentaires, en prenant en compte le rôle des différents réservoirs sédimentaires, par l'application du concept de cascade sédimentaire sous un angle cartographique.Les processus de transferts sédimentaires ont été étudiés dans deux bassins versants des Alpes suisses (torrent du Bruchi, à Blatten beiNaters et torrent du Meretschibach, à Agarn). La cartographie géomorphologique a été couplée avec des mesures complémentaires permettant d'estimer les flux sédimentaires et les taux d'érosion (traçages de peinture, piquets de dénudation et utilisation du LiDAR terrestre). La méthode proposée se révèle innovatrice en comparaison avec la plupart des systèmes de légendes géomorphologiques existants, qui ne sont souvent pas adaptés pour cartographier de manière satisfaisante les systèmes géomorphologiques complexes et actifs que sont les bassins torrentiels. L'intérêt de cette méthode est qu'elle permet l'établissement d'une cascade sédimentaire, mais uniquement pour des systèmes où l'occurrence d'une lave torrentielle est contrôlé par le degré de remplissage en matériaux du chenal. Par ailleurs, le produit cartographique ne peut être directement utilisé pour la création de cartes de dangers - axées sur les zones de dépôt - mais revêt un intérêt pour la mise en place de mesures de correction et pour l'installation de systèmes de monitoring ou d'alerte.La deuxième partie de ce travail de recherche est consacrée à la cartographie géomorphologique. Une analyse a porté sur un échantillon de 146 cartes ou systèmes de légende datant des années 1950 à 2009 et réalisés dans plus de 40 pays. Cette analyse a permis de mettre en évidence la diversité des applications et des techniques d'élaboration des cartes géomorphologiques. - Debris flows are one of the most important vectors of sediment transfer in mountainous areas. Their hydro-geomorphological behaviour is conditioned by geological, geomorphological, topographical, hydrological, climatic and anthropic factors. European research in torrential systems has focused more on hydrological processes than on geomorphological processes acting as debris flow triggers. Nevertheless, the identification of sediment volumes that have the potential to be mobilised in small torrential systems, as well as the recognition of processes responsible for their mobilisation and transfer within the torrential system, are important in terms of land-use planning and natural hazard management. Moreover, a correlation between rainfall and debris flow occurrence is not always established and a number of debris flows seems to occur when a poorly understood geomorphological threshold is reached.A pragmatic methodology has been developed for mapping sediment storages that may constitute source zone of bed load transport and debris flows as a preliminary tool before quantifying their volumes. It is based on data directly derived from GIS analysis using high resolution DEM's, field measurements and aerial photograph interpretations. It has been conceived to estimate sediment transfer dynamics, taking into account the role of different sediment stores in the torrential system applying the concept of "sediment cascade" in a cartographic point of view.Sediment transfer processes were investigated in two small catchments in the Swiss Alps (Bruchi torrent, Blatten bei Naters and Meretschibach torrent, Agarn). Thorough field geomorphological mapping coupled with complementary measurements were conducted to estimate sediment fluxes and denudation rates, using various methods (reference coloured lines, wooden markers and terrestrial LiDAR). The proposed geomorphological mapping methodology is quite innovative in comparison with most legend systems that are not adequate for mapping active and complex geomorphological systems such as debris flow catchments. The interest of this mapping method is that it allows the concept of sediment cascade to be spatially implemented but only for supply-limited systems. The map cannot be used directly for the creation of hazard maps, focused on the deposition areas, but for the design of correction measures and the implementation of monitoring and warning systems.The second part of this work focuses on geomorphological mapping. An analysis of a sample of 146 (extracts of) maps or legend systems dating from the middle of the 20th century to 2009 - realised in more than 40 different countries - was carried out. Even if this study is not exhaustive, it shows a clear renewed interest for the discipline worldwide. It highlights the diversity of applications, techniques (scale, colours and symbology) used for their conception.
Resumo:
BACKGROUND: High sugar and fat intakes are known to increase intrahepatocellular lipids (IHCLs) and to cause insulin resistance. High protein intake may facilitate weight loss and improve glucose homeostasis in insulin-resistant patients, but its effects on IHCLs remain unknown. OBJECTIVE: The aim was to assess the effect of high protein intake on high-fat diet-induced IHCL accumulation and insulin sensitivity in healthy young men. DESIGN: Ten volunteers were studied in a crossover design after 4 d of either a hypercaloric high-fat (HF) diet; a hypercaloric high-fat, high-protein (HFHP) diet; or a control, isocaloric (control) diet. IHCLs were measured by (1)H-magnetic resonance spectroscopy, fasting metabolism was measured by indirect calorimetry, insulin sensitivity was measured by hyperinsulinemic-euglycemic clamp, and plasma concentrations were measured by enzyme-linked immunosorbent assay and gas chromatography-mass spectrometry; expression of key lipogenic genes was assessed in subcutaneous adipose tissue biopsy specimens. RESULTS: The HF diet increased IHCLs by 90 +/- 26% and plasma tissue-type plasminogen activator inhibitor-1 (tPAI-1) by 54 +/- 11% (P < 0.02 for both) and inhibited plasma free fatty acids by 26 +/- 11% and beta-hydroxybutyrate by 61 +/- 27% (P < 0.05 for both). The HFHP diet blunted the increase in IHCLs and normalized plasma beta-hydroxybutyrate and tPAI-1 concentrations. Insulin sensitivity was not altered, whereas the expression of sterol regulatory element-binding protein-1c and key lipogenic genes increased with the HF and HFHP diets (P < 0.02). Bile acid concentrations remained unchanged after the HF diet but increased by 50 +/- 24% after the HFHP diet (P = 0.14). CONCLUSIONS: Protein intake significantly blunts the effects of an HF diet on IHCLs and tPAI-1 through effects presumably exerted at the level of the liver. Protein-induced increases in bile acid concentrations may be involved. This trial was registered at www.clinicaltrials.gov as NCT00523562.
Resumo:
Trace element and isotopic compositions of marine fossils and sediment were analyzed from several Miocene deposits in the circum-Alpine region in order to reconstruct the paleoceanographic and paleoclimatic changes related to sea level changes, basin evolution and Alpine orogeny. To the north and the east the Alps were border by an epicontinental sea, the Paratethys, while to the south the Mediterranean surrounded the uplifting mountains during the Miocene. The thesis mainly focused on sediments and fossils sampled from Miocene beds of these two oceanic provinces. The north Alpine Molasse, the Vienna and Pannonian Basins were located in the Western and Central Paratethys. O-isotope compositions of well-preserved phosphatic fossils in these sediments support deposition under sub-tropical to warm-temperate climate with water temperatures between 14 to 28 °C for the Miocene. δ18O values of fossil shark teeth from different horizons vary similarly to those of the global trend until the end of the Badenian, however the δ18O values show wider range, which indicates local effects iii the sub-basins. The trend of 87Sr/86Sr in the samples roughly agrees with an open ocean environment for the Miocene. Yet a number of samples deviate from typical open ocean compositions with higher ratios suggesting modification of seawater by local and old terrestrial sources. In contrast, two exceptional teeth from the locality of La Moliere have extremely low δ18O values and low 87Sr/86Sr. However, the REE patterns of their enameloid are similar to those of teeth having O and Sr isotopic compositions typical of a marine setting at this site. Collectively, this suggests that the two teeth formed while the sharks frequented a freshwater environment with very low 18O-content and 87Sr/86Sr controlled by Mesozoic calcareous rocks. This is consistent with a paleogeography of high-elevation (~2300m) Miocene Alps adjacent to a marginal sea. The local effects are also reflected in the εNd values of the Paratethyan fossils, which is compatible with input from ancient crystalline rocks and Mesozoic sediments, while other samples with elevated εNd values indicate an influence of Neogene volcanism on the water budget. Excluding samples whose isotopic compositions reflect a local influence on the water column, an average εNd value of -7.9 ± 0.5 may be inferred for the Paratethys seawater. This value is indistinguishable from the Miocene value of the Indian Ocean, supporting a dominant role of ludo-Pacific water masses in the Paratethys. Regarding the Mediterranean, stable C-and O-isotope compositions of benthic and planktonic foraminifera from the Umbria-Marche region (UMC) have an offset typical for their habitats and the changes in composition mimic global changes, suggesting that the regional conditions of climate and the carbon cycle were controlled by global changes. The radiogenic isotope compositions of the fossil assemblages allow for distinction of periods. From 25 to 19 Ma, high εNd values and low 87Sr/86Sr of sediments and fossils support intense tectonism and volcanism, related to the opening of the western Mediterranean. Between 19 and 13 Ma the Mediterranean has εNd values that are largely controlled by incursion of Indian Ocean water. Brief periods of local hinterland control on seawater compositions are indicated by spikes in the εNd record, coinciding with volcanic events and a short sea-level decrease at about 15.2 Ma. Lower 87Sr/86Sr compared to the open ocean is compatible with rapid uplift of the hinterland and intense influx of Sr from Mesozoic carbonates of the western Apennines, while higher 87Sr/86Sr for other sites indicates erosion of old crustal silicate rocks. Finally, from 13 to 7 Ma the fossils have 87Sr/86Sr similar to those of Miocene seawater and their εNd values indicates fluctuating influence of Atlantic, and Indian Ocean or Paratethys sources of seawater entering the Mediterranean, driven by global sealevel changes and local tectonism. RÉSUMÉ DE LA THÈSE Les compositions en éléments traces et isotopiques de fossiles marins et de sédiments on été analysées à partir de nombreux dépôts marins dans la région circum Alpine dans le but de reconstruire les changements paléocéanographiques et paléoclimatiques liés aux changements du niveau marin, à l'évolution en bassins et à l'orogénie alpine. Au nord et à l'est des Alpes, une mer épicontinentale appelée Paratéthys s'est ouverte, alors que plus au sud la mer Méditerranée bordait au Miocène les Alpes naissantes. Le but de cette recherche est de se concentrer sur les sédiments et les fossiles provenant des couches du Miocènes de ces deux provinces marines. Les bassins de la Molasse Alpine du nord, de Vienne et Pannonien étaient situés au niveau de la Paratéthys Occidentale et Centrale. Les compositions isotopiques de l'oxygène de fossiles phosphatés bien préservés dans ces sédiments étayent la théorie d'un dépôt sous un climat subtropical à tempéré chaud avec des températures entre 14 et 28°C pendant le Miocène. Les valeurs δ18O des fossiles sont similaires à la tendance globale jusqu'à la fin du Badénien. Cependant les larges fluctuations en δ18O indiquent des effets locaux au niveau des sous bassins. En outre, deux dents de requin exceptionnelles présentent des valeurs extrêmement basses de δ18O. Ces données suggèrent que ces deux dents se sont formées alors que les requins fréquentaient un environnement d'eau douce avec de faibles valeurs de 18O. Le calcul de la composition isotopique de l'oxygène de cette eau douce permet d'obtenir une estimation de la paléoélévatian moyenne des Alpes du Miocène (~2300m). La tendance 87Sr/86Sr pour ces échantillons concorde approximativement avec un environnement d'océan ouvert au cours du Miocène. Toutefois un nombre d'échantillons dévie des compositions d'océan ouvert typiques, avec des rapports élevés suggérant des modifications de l'eau de mer par des sources locales et terrestres. Les effets locaux sont aussi reflétés au niveau des valeurs en εNd des fossiles paratéthysiens. Ceci est cohérent avec un apport d'anciennes roches cristallines et de sédiments mésozoïques, tandis que d'autres échantillons avec des valeurs hautes de εNd indiquent une influence d'un volcanisme néogène dans le budget marin. En excluant les échantillons dont les compositions isotopiques confirment une influence locale, une valeur moyenne de εNd de 7.9 t 0.5 peut être déduite pour l'eau de la Parathétys. Cette valeur est semblable à la valeur correspondant à l'Océan Indien durant le Miocène, confirmant un rôle dominant de cet océan dans la Paratéthys. Au niveau de la Méditerranée, les compositions en isotopes stables du Carbone et de l'Oxygène de foraminifères planctoniques et benthique de la région Umbria-Marche présentent un offset typique à leurs habitats. De plus les changements dans leurs compositions suivent les changements globaux, suggérant ainsi que les conditions climatiques régionales et le cycle du carbone étaient contrôlés par des phénomènes globaux. La composition en isotopes radiogéniques d'assemblages fossiles permet une reconnaissance sur trois périodes distinctes. De 25 à 19 millions d'années (Ma), des valeurs élevées de εNd et un faible rapport 87Sr/86Sr dans les sédiments soutiennent l'idée d'une activité tectonique et volcanique intense, liée à l'ouverture de la Méditerranée occidentale. Entre 19 et 13 Ma, la Méditerranée montre des valeurs de εNd qui sont largement contrôlées par une incursion d'eau provenant de l'Océan Indien. En effet, aux alentours de 15,2 Ma, des pics dans l'enregistrement des valeurs de εNd, coïncidant avec des événements volcaniques et de brèves diminutions du niveau marin. Enfin, de 13 à 7 Ma, les fossiles ont des rapports ß7Sr/8fiSr similaires à ceux de l'eau de mer au Miocène. Leurs valeurs de εNd indiquent une influence changeante de l'océan Atlantique, et de l'océan Indien ou des sources d'eau de merde la Parathétys qui entrent dans les bassins méditerranéens. Ce changement est guidé par des modifications globales du niveau marin et par la tectonique locale. RÉSUMÉ DE LA THÈSE (POUR LE GRAND PUBLIC) Les analyses des compositions en éléments traces et isotopiques des fossiles marins sont un outil très utile pour reconstruire les conditions océaniques et climatiques anciennes. Ce travail de thèse se concentre sur les sédiments déposés dans un environnement marin proches des Alpes au cours du Miocène, entre 23 et 7 millions d'années (Ma). Cette période est caractérisée par une tectonique alpine active, ainsi que par des changements climatiques et océanographiques globaux importants. Dans le but de tracer ces changements, les compositions isotopiques du Strontium, du Néodyme, de l'Oxygène et du Carbone ont été analysées dans des fossiles bien préservés ainsi que les sédiments contemporains. Les échantillons proviennent de deux provinces océaniques distinctes, la première est la Mer Méditerranée, et l'autre est une mer épicontinentale appelée Parathétys, qui existait au nord et à l'est des Alpes durant le Miocène. Au niveau de la Parathétys Occidentale et Orientale, les compositions isotopiques d'oxygène de dents de requins confirment un dépôt sous un climat subtropical à tempéré chaud avec des températures d'eau entre 14 et 28°C au Miocène. En outre, deux dents de requins exceptionnelles ont enregistré des compositions isotopiques d'oxygène extrêmement basses. Cela suggère que ces deux dents se sont formées alors que les requins entraient dans un système d'eau douce. Le calcul de la composition isotopique de l'oxygène de cette eau douce permet d'obtenir une estimation de la paléoélévation des Alpes au Miocène qui est aussi élevée que celle d'aujourd'hui. La tendance isotopique du Strontium pour ces échantillons concorde approximativement avec un environnement d'océan ouvert. Cependant un certain nombre d'échantillons indique des modifications de l'eau de mer par des sources terrestres locales. Les effets locaux sont aussi visibles au niveau des compositions isotopiques du Néodyme, qui sont en accord avec un apport provenant de roches cristallines anciennes et de sédiments du Mésozoïque, alors que d'autres échantillons indiquent une influence volcanique néogène dans le budget marin. A l'exclusion des échantillons dont les compositions correspondent à une influence locale, les compositions isotopiques du Néodyme de la Parathétys sont très similaires aux valeurs de l'Océan Indien, montrant ainsi un rôle important des masses d'eau IndoPacifiques dans cette région. Au niveau de la Méditerranée, les compositions en isotopes stables du Carbone et de l'Oxygène de foraminifères planctoniques et benthique de la région Umbria-Marche présentent un offset typique à leurs habitats. De plus, les changements dans leurs compositions suivent les changements globaux, suggérant ainsi que les conditions climatiques régionales et le cycle du carbone étaient contrôlés par des phénomènes globaux. La composition en isotopes radiogéniques d'assemblages fossiles permet une reconnaissance sur trois périodes distinctes. De 25 à 19 Ma, des rapport isotopiques élevés pour le Néodyme et faibles pour le Strontium dans les sédiments et les fossiles soutiennent l'idée d'une activité tectonique et volcanique intense, liée à l'ouverture de la Méditerranée occidentale. Entre 19 et 13 Ma, la Méditerranée présente des rapports isotopiques du Néodyme qui sont largement contrôlés par une incursion d'eau provenant de l'Océan Indien. En effet, aux alentours de 15,2 Ma, des pics dans l'enregistrement des valeurs des isotopes du Néodyme coïncident avec des événements volcaniques et de brèves diminutions du niveau marin. Finalement, de 13 à 7 Ma, les fossiles ont des rapports isotope Strontium similaires à ceux de l'eau de mer au Miocène. Les rapports isotopiques du Néodyme indiquent une influence changeante de l'océan Atlantique, et de l'océan Indien ou des sources d'eau de mer de la Parathétys qui entrent dans les bassins méditerranéens. Ce changement est guidé par des modifications globales du niveau marin et par la tectonique locale.
Resumo:
The precise localization of extracellular matrix and cell wall components is of critical importance for multicellular organisms. Lignin is a major cell wall modification that often forms intricate subcellular patterns that are central to cellular function. Yet the mechanisms of lignin polymerization and the subcellular precision of its formation remain enigmatic. Here, we show that the Casparian strip, a lignin-based, paracellular diffusion barrier in plants, forms as a precise, median ring by the concerted action of a specific, localized NADPH oxidase, brought into proximity of localized peroxidases through the action of Casparian strip domain proteins (CASPs). Our findings in Arabidopsis provide a simple mechanistic model of how plant cells regulate lignin formation with subcellular precision. We speculate that scaffolding of NADPH oxidases to the downstream targets of the reactive oxygen species (ROS) that they produce might be a widespread mechanism to ensure specificity and subcellular precision of ROS action within the extracellular matrix.
Resumo:
Isotopic analyses on bulk carbonates are considered a useful tool for palaeoclimatic reconstruction assuming calcite precipitation occurring at oxygen isotope equilibrium with local water and detrital carbonate input being absent or insignificant. We present results from Lake Neuchatel (western Switzerland) that demonstrate equilibrium precipitation of calcite, except during high productivity periods, and the presence of detrital and resuspended calcite. Mineralogy, geochemistry and stable isotope values of Lake Neuchatel trap sediments and adjacent rivers suspension were studied. Mineralogy of suspended matter in the major inflowing rivers documents an important contribution of detrital carbonates, predominantly calcite with minor amounts of dolomite and ankerite. Using mineralogical data, the quantity of allochthonous calcite can be estimated by comparing the ratio ankerite + dolomite/calcite + ankerite + dolomite in the inflowing rivers and in the traps. Material taken from sediment traps shows an evolution from practically pure endogenic calcite in summer (10-20% detrital material) to higher percentages of detrital material in winter (up to 20-40%). Reflecting these mineralogical variations, delta(13)C and delta(18)O values of calcite from sediment traps are more negative in summer than in winter times. Since no significant variations in isotopic composition of lake water were detected over one year, factors controlling oxygen isotopic composition of calcite in sediment traps are the precipitation temperature, and the percentage of resuspended and detrital calcite. Samples taken close to the river inflow generally have higher delta values than the others, confirming detrital influence. SEM and isotopic studies on different size fractions (<2, 2-6, 6-20, 20-60, >60 mu m) of winter and summer samples allowed the recognition of resuspension and to separate new endogenic calcite from detrital calcite. Fractions >60 and (2 mu m have the highest percentage of detritus, Fractions 2-6 and 6-20 mu m are typical for the new endogenic calcite in summer, as given by calculations assuming isotopic equilibrium with local water. In winter such fractions show similar values than in summer, indicating resuspension. Using the isotopic composition of sediment traps material and of different size fractions, as well as the isotopic composition of lake water, the water temperature measurements and mineralogy, we re-evaluated the bulk carbonate potential for palaeoclimatic reconstruction in the presence of detrital and re-suspended calcite. This re-evaluation leads to the following conclusion: (1) the endogenic signal can be amplified by applying a particle-size separation, once the size of endogenic calcite is known from SEM study; (2) resuspended calcite does not alter the endogenic signal, but it lowers the time resolution; (3) detrital input decreases at increasing distances from the source, and it modifies the isotopic signal only when very abundant; (4) influence of detrital calcite on bulk sediment isotopic composition can be calculated. (C) 1998 Elsevier Science B.V. All rights reserved.
Resumo:
A new method is used to estimate the volumes of sediments of glacial valleys. This method is based on the concept of sloping local base level and requires only a digital terrain model and the limits of the alluvial valleys as input data. The bedrock surface of the glacial valley is estimated by a progressive excavation of the digital elevation model (DEM) of the filled valley area. This is performed using an iterative routine that replaces the altitude of a point of the DEM by the mean value of its neighbors minus a fixed value. The result is a curved surface, quadratic in 2D. The bedrock surface of the Rhone Valley in Switzerland was estimated by this method using the free digital terrain model Shuttle Radar Topography Mission (SRTM) (~92 m resolution). The results obtained are in good agreement with the previous estimations based on seismic profiles and gravimetric modeling, with the exceptions of some particular locations. The results from the present method and those from the seismic interpretation are slightly different from the results of the gravimetric data. This discrepancy may result from the presence of large buried landslides in the bottom of the Rhone Valley.