Cognitive issues in fingerprint analysis: Inter- and intra-expert consistency and the effect of a "target" comparison

Deciding whether two fingerprint marks originate from the same source requires examination and comparison of their features. Many cognitive factors play a major role in such information processing. In this paper we examined the consistency (both between- and within-experts) in the analysis of latent marks, and whether the presence of a 'target' comparison print affects this analysis. Our findings showed that the context of a comparison print affected analysis of the latent mark, possibly influencing allocation of attention, visual search, and threshold for determining a 'signal'. We also found that even without the context of the comparison print there was still a lack of consistency in analysing latent marks. Not only was this reflected by inconsistency between different experts, but the same experts at different times were inconsistent with their own analysis. However, the characterization of these inconsistencies depends on the standard and definition of what constitutes inconsistent. Furthermore, these effects were not uniform; the lack of consistency varied across fingerprints and experts. We propose solutions to mediate variability in the analysis of friction ridge skin.

Organization of pre-Variscan basement areas at the north-Gondwanan margin

Pre-Variscan basement elements of Central Europe appear in polymetamorphic domains juxtaposed through Variscan and/or Alpine tectonic events. Consequently, nomenclatures and zonations applied to Variscan and Alpine structures, respectively, cannot be valid for pre-Variscan structures. Comparing pre-Variscan relics hidden in the Variscan basement areas of Central Europe, the Alps included, large parallels between the evolution of basement areas of future Avalonia and its former peri-Gondwanan eastern prolongations (e.g. Cadomia, Intra-Alpine Terrane) become evident. Their plate-tectonic evolution from the Late Proterozoic to the Late Ordovician is interpreted as a continuous Gondwana-directed evolution. Cadomian basement, late Cadomian granitoids, late Proterozoic detrital sediments and active margin settings characterize the pre-Cambrian evolution of most of the Gondwana-derived microcontinental pieces. Also the Rheic ocean, separating Avalonia from Gondwana, should have had, at its early stages, a lateral continuation in the former eastern prolongation of peri-Gondwanan microcontinents (e.g. Cadomia, Intra-Alpine Terrane). Subduction of oceanic ridge (Proto-Tethys) triggered the break-off of Avalonia, whereas in the eastern prolongation, the presence of the ridge may have triggered the amalgamation of volcanic arcs and continental ribbons with Gondwana (Ordovician orogenic event). Renewed Gondwana-directed subduction led to the opening of Palaeo-Tethys.

Generalized linear and generalized additive models in studies of species distributions: setting the scene

An important statistical development of the last 30 years has been the advance in regression analysis provided by generalized linear models (GLMs) and generalized additive models (GAMs). Here we introduce a series of papers prepared within the framework of an international workshop entitled: Advances in GLMs/GAMs modeling: from species distribution to environmental management, held in Riederalp, Switzerland, 6-11 August 2001.We first discuss some general uses of statistical models in ecology, as well as provide a short review of several key examples of the use of GLMs and GAMs in ecological modeling efforts. We next present an overview of GLMs and GAMs, and discuss some of their related statistics used for predictor selection, model diagnostics, and evaluation. Included is a discussion of several new approaches applicable to GLMs and GAMs, such as ridge regression, an alternative to stepwise selection of predictors, and methods for the identification of interactions by a combined use of regression trees and several other approaches. We close with an overview of the papers and how we feel they advance our understanding of their application to ecological modeling.

Geometry, petrology and growth of a shallow crustal laccolith : the Torres del Paine Mafic Complex (Patagonia)

1. ABSTRACTS - RÉSUMÉSSCIENTIFIC ABSTRACT - ENGLISH VERSIONGeometry, petrology and growth of a shallow crustal laccolith: the Torres del Paine Mafi c Complex (Patagonia)The Torres del Paine intrusive complex (TPIC) is a composite mafic-granitic intrusion, ~70km2, belonging to a chain of isolated Miocene plutons in southern Patagonia. Their position is intermediate between the Mesozoic-Cenozoic calc-alkaline subduction related Patagonian batholith in the West and the late Cenozoic alkaline basaltic back-arc related plateau lavas in the East. The Torres del Paine complex formed during an important reconfiguration of the Patagonian geodynamic setting, with a migration of magmatism from the arc to the back-arc, possibly related to the Chile ridge subductionThe complex intruded the flysch of the Cretaceous Cerro Toro and Punta Barrosa Formations during the Miocene, creating a well-defined narrow contact aureole of 200-400 m width.In its eastern part, the Torres del Paine intrusive complex is a laccolith, composed of a succession of hornblende-gabbro to diorite sills at its base, with a total thickness of ~250m, showing brittle contacts with the overlying granitic sills, that form spectacular cliffs of more than 1000m. This laccolith is connected, in the western part, to its feeding system, with vertical alternating sheets of layered gabbronorite and Hbl-gabbro, surrounded and percolated by diorites. ID-TIMS U-Pb on zircons on feeder zone (FZ) gab- bros yield 12.593±0.009Ma and 12.587±0.009Ma, which is identifcal within error to the oldest granite dated so far by Michel et al. (2008). In contrast, the laccolith mafic complex is younger than than the youngest granite (12.50±0.02Ma), and has been emplaced from 12.472±0.009Ma to 12.431 ±0.006Ma, by under-accretion beneath the youngest granite at the interface with previously emplaced mafic sills.The gabbronorite crystallization sequence in the feeder zone is dominated by olivine, plagioclase, clinopyroxene and orthopyroxene, while amphibole forms late interstitial crystals. The crystallization sequence is identical in Hornblende-gabbro from the feeder zone, with higher modal hornblende. Gabbronorite and Hornblende-gabbro both display distinct Eu and Sr positive anomalies. In the laccolith, a lower Hornblende-gabbro crystallized in sills and evolved to a high alkali shoshonitic series. The Al203, Ti02, Na20, K20, Ba and Sr composition of these gabbros is highly variable and increases up to ~50wt% Si02. The lower hornblende-gabbro is characterized by kaersutite anhedral cores with inclusions of olivine, clino- and orthopyroxene and rare apatite and An70 plagioclase. Trace element modelling indicates that hornblende and clinopyroxene are in equilibrium with a liquid whose composition is similar to late basaltic trachyandesitic dikes that cut the complex. The matrix in the lower hornblende gabbro is composed of normally zoned oligoclase, Magnesio-hornblende, biotite, ilmenite and rare quartz and potassium feldspar. This assemblage crystallized in-situ from a Ba and Sr-depleted melts. In contrast, the upper Hbl-gabbro is high-K calc-alkaline. Poikilitic pargasite cores have inclusions of euhedral An70 plagioclase inclusions, and contain occasionally clinopyroxene, olivine and orthopyroxene. The matrix composition is identical to the lower hornblende-gabbro and similar to the diorite. Diorite bulk rock compositions show the same mineralogy but different modal proportions relative to hornblende-gabbrosThe Torres del Paine Intrusive Complex isotopic composition is 87Sr/86Sr=0.704, 143Nd/144Nd=0.5127, 206Pb/204Pb=18.70 and 207Pb/204Pb=15.65. Differentiated dioritic and granitic units may be linked to the gabbroic cumulates series, with 20-50% trapped interstitial melt, through fractionation of olivine-bearing gabbronorite or hornblende-gabbro fractionation The relative homogeneity of the isotopic compositions indicate that only small amounts of assimilation occurred. Two-pyroxenes thermometry, clinopyroxene barometry and amphibole-plagioclase thermometry was used to estimate pressure and temperature conditions. The early fractionation of ultramafic cumulates occurs at mid to lower crustal conditions, at temperatures exceeding 900°C. In contrast, the TPIC emplacement conditions have been estimated to ~0.7±0.5kbar and 790±60°C.Based on field and microtextural observations and geochemical modelling, fractionation of basaltic-trachyandesitic liquids at intermediate to lower crustal levels, has led to the formation of the Torres del Paine granites. Repetitive replenishment of basaltic trachy- andesitic liquid in crustal reservoirs led to mixed magmas that will ascend via the feeder zone, and crystallize into a laccolith, in the form of successive dioritic and gabbroic sills. Dynamic fractionation during emplacement concentrated hornblende rich cumulates in the center of individual sills. Variable degrees.of post-emplacement compaction led to the expulsion of felsic liquids that preferentially concentrated at the top of the sills. Incremental sills amalgamation of the entire Torres del Paine Intrusive Complex has lasted for ~160ka.RESUME SCIENTIFIQUE - VERSION FRANÇAISEGéométrie, pétrologie et croissance d'un laccolite peu profond : Le complexe ma- fique du Torres del Paine (Patagonie)Le Complexe Intrusif du Torres del Paine (CITP) est une intrusion bimodale, d'environ 70km2, appartenant à une chaîne de plutons Miocènes isolés, dans le sud de la Patago-nie. Leur position est intermédiaire entre le batholite patagonien calco-alcalin, à l'Ouest, mis en place au Mesozoïque-Cenozoïque dans un contexte de subduction, et les basal-tes andésitiques et trachybasaltes alcalins de plateau, plus jeune, à l'Est, lié à l'ouverture d'un arrière-arc.A son extrémité Est, le CITP est une succession de sills de gabbro à Hbl et de diorite, sur une épaisseur de ~250m, avec des évidences de mélange. Les contacts avec les sills de granite au-dessus, formant des parois de plus de 1000m, sont cassants. Ce laccolite est connecté, dans sa partie Ouest, à une zone d'alimentation, avec des intrusions sub-ver- ticales de gabbronorite litée et de gabbro à Hbl, en alternance. Celles-ci sont traversées et entourées par des diorites. Les zircons des gabbros de la zone d'alimentation, datés par ID-TIMS, ont cristallisés à 12.593±0.009Ma et 12.587±0.009Ma, ce qui correspond au plus vieux granite daté à ce jour par Michel et al. (2008). A l'inverse, les roches manques du laccolite se sont mises en place entre 12.472±0.009Ma et 12.431 ±0.006Ma, par sous-plaquage successifs à l'interface avec le granite le plus jeune daté à ce jour (12.50±0.02Ma).La séquence de cristallisation des gabbronorites est dominée par Ol, Plg, Cpx et Opx, alors que la Hbl est un cristal interstitiel. Elle est identique dans les gabbros à Hbl de la zone d'alimentation, avec ~30%vol de Hbl. Les gabbros de la zone d'alimentation montrent des anomalies positives en Eu et Sr distinctes. Dans le laccolite, le gabbro à Hbl inférieur évolue le long d'une série shoshonitique, riche en éléments incompatibles. Sa concentration en Al203, Ti02, Na20, K20, Ba et Sr est très variable et augmente rapide-ment jusqu'à ~50wt% Si02. Il est caractérisé par la présence de coeurs résorbés de kaer- sutite, entourés de Bt, et contenant des inclusions d'OI, Cpx et Opx, ou alors d'Ap et de rares Plg (An70). Hbl et Cpx ont cristallisés à partir d'un liquide de composition similaire aux dykes trachy-andesite basaltique du CITP. La matrice, cristallisée in-situ à partir d'un liquide pauvre en Ba et Sr, est composée d'oligoclase zoné de façon simple, de Mg-Hbl, Bt, llm ainsi que de rares Qtz et KF. Le gabbro à Hbl supérieur, quant à lui, appartient à une suite chimique calco-alcaline riche en K. Des coeurs poecilitiques de pargasite con-tiennent de nombreuses inclusions de Plg (An70) automorphe, ainsi que des Ol, Cpx et Opx. La composition de la matrice est identique à celle des gabbros à Hbl inférieurs et toutes deux sont similaires à la minéralogie des diorites. Les analyses sur roches totales de diorites montrent la même variabilité que celles de gabbros à Hbl, mais avec une ten-eur en Si02 plus élevée.La composition isotopique des liquides primitifs du CITP a été mesurée à 87Sr/86Sr=0.704, 143Nd/144Nd=0.5127, 206Pb/204Pb=18.70 et 207Pb/204Pb=15.65. Les granites et diorites différenciés peuvent être reliés à des cumulais gabbronoritiques (F=0.74 pour les granites et F=1-0.5 pour les diorites) et gabbroïques à Hbl (fractionnement supplémentaire pour les granites, avec F=0.3). La cristallisation de 20 à 50%vol de liquide interstitiel piégé dans les gabbros du CITP explique leur signature géochimique. Seules de faibles quantités de croûte continentale ont été assimilées. La température et la pression de fractionnement ont été estimées, sur la base des thermobaromètres Opx-Cpx, Hbl-Plg et Cpx, à plus de 900°C et une profondeur correspondant à la croûte inférieure-moyenne. A l'inverse, les conditions de cristallisation de la matrice des gabbros et diorites du laccolite ont été estimées à 790±60°C et ~0.7±0.5kbar.Je propose que les liquides felsiques du CITP se soient formés par cristallisation frac-tionnée en profondeur des assemblages minéralogiques observés dans les gabbros du CITP, à partir d'un liquide trachy-andesite basaltique. La percolation de magma dans les cristaux accumulés permet la remontée du mélange à travers la zone d'alimentation, vers le laccolite, où des sills se mettent en place successivement. L'amalgamation de sills dans le CITP a duré ~160ka.Le CITP s'est formé durant une reconfiguration importante du contexte géodynamique en Patagonie, avec un changement du magmatisme d'arc vers un volcanisme d'arrière- arc. Ce changement est certainement lié à la subduction de la ride du Chili.RESUME GRAND PUBLIC - VERSION FRANÇAISEGéométrie, pétrologie et croissance d'une chambre magmatique peu profonde : Le complexe mafique du Torres del Paine (Patagonie)Le pourtour de l'Océan Pacifique est caractérisé par une zone de convergence de plaques tectoniques, appelée zone de subduction, avec le plongement de croûte océa-nique sous les Andes dans le cas de la Patagonie. De nombreux volcans y sont associés, formant la ceinture de feu. Mais seuls quelques pourcents de tout le magma traversant la croûte terrestre parviennent à la surface et la majeure partie cristallise en profondeur, dans des chambres magmatiques. Quelles est leur forme, croissance, cristallisation et durée de vie ? Le complexe magmatique du Torres del Paine représente l'un des meilleurs endroits au monde pour répondre à ces questions. Il se situe au sud de la Patagonie, formant un massif de 70km2. Des réponses peuvent être trouvées à différentes échelles, variant de la montagne à des minéraux de quelques 1000ème de millimètres.Il est possible de distinguer trois types de roches : des gabbros et des diorites sur une épaisseur de 250m, surmontées par des parois de granite de plus de 1000m. Les contacts entre ces roches sont tous horizontaux. Entre granites et gabbro-diorite, le contact est net, indiquant que le second magma s'est mis en place au contact avec un magma plus ancien, totalement solidifié. Entre gabbros et diorites, les contacts sont diffus, souvent non-linéaires, indiquant à l'inverse la mise en contact de magmas encore partiellement liquides. Dans la partie Ouest de cette chambre magmatique, les contacts entre roches sont verticaux. Il s'agit certainement du lieu de remplissage de la chambre magmatique.Lors du refroidissement d'un magma, différents cristaux vont se former. Leur stabilité et leur composition varient en fonction de la pression, de la température ou de la chimie du magma. La séquence de cristallisation peut être définie sur la base d'observations microscopiques et de la composition chimique des minéraux. Différents gabbros sont ainsi distingués : le gabbro à la base est riche en hornblende, d'une taille de ~5mm, sans inclusion de plagioclase mais avec des cristaux d'olivine, clinopyroxene et orthopyroxene inclus ; le gabbro supérieur est lui-aussi riche en hornblende (~5mm), avec les mêmes inclusions additionnées de plagioclase. Ces cristaux se sont formés à une température supérieure à 900°C et une profondeur correspondant à la croûte moyenne ou inférieure. Les minéraux plus fin, se trouvant hors des cristaux de hornblende des deux gabbros, sont similaires à ceux des diorites : plagioclase, biotite, hornblende, apatite, quartz et feldspath alcalin. Ces minéraux sont caractéristiques des granites. Ils ont cristallisé à ~790°C et ~2km de profondeur.La cristallisation des minéraux et leur extraction du magma par gravité provoque un changement progressif de la composition de ce dernier. Ainsi, après extraction d'olivine et d'orthopyroxene riches en Mg, de clinopyroxene riche en Ca, de plagioclase riche en Ca et Al et d'hornblende riche en Ca, Al et Mg, le liquide final sera appauvri en ces élé-ments. Un lien peut ainsi être proposé entre les diorites dont la composition est proche du liquide de départ, les granites dont la composition est similaire au liquide final, et les gabbros dont la minéralogie correspond aux minéraux extraits.L'utilisation de zircons, un minéral riche en U dont les atomes se transforment en Pb par décomposition radioactive au cours de millions d'années, permet de dater le refroidissement des roches qui les contiennent. Ainsi, il a été observé que les roches de la zone d'alimentation, à l'Ouest du complexe magmatique, ont cristallisés il y a 12.59±0.01 Ma, en même temps que les granites les plus vieux, se trouvant au sommet de la chambre magmatique, datés par Michel et al. (2008). Les deux roches pourraient donc avoir la même origine. A l'inverse, les gabbros et diorites de la chambre magmatique ont cristallisé entre 12.47±0.01Ma et 12.43±0.01Ma, les roches les plus vieilles étant à la base.En comparant la composition des roches du Torres del Paine avec celles d'autres en-tités géologiques de Patagonie, les causes du magmatisme peuvent être recherchées. A l'Ouest, on trouve en effet des intrusions granitiques, plus anciennes, caractéristiques de zones de convergence de plaque tectonique, alors qu'à l'Est, des laves basaltiques plus jeunes sont caractéristiques d'une dynamique d'extension. Sur la base des compositions chimiques des roches de ces différentes entités, l'évolution progressive de l'une à l'autre a pu être démontrée. Elle est certainement due à l'arrivée d'une dorsale océanique (zone d'extension crustale et de création de croûte océanique par la remontée de magma) dans la zone de subduction, le long des Andes.Je propose que, dans un premier temps, des magmas granitiques sont remontés dans la chambre magmatique, laissant d'importants volumes de cristaux dans la croûte pro-fonde. Dans un second épisode, les cristaux formés en profondeur ont été transportés à travers la croûte continentale, suite au mélange avec un nouveau magma injecté. Ces magmas chargés de cristaux ont traversé la zone d'alimentation avant de s'injecter dans la chambre magmatique. Différents puises ont été distingués, injectés dans la chambre magmatique du sommet à la base concernant les granites, puis à la base du granite le plus jeune pour les gabbros et diorites. Le complexe magmatique du Torres del Paine s'est construit sur une période totale de 160'000±20'000 ans.

Multiple plume events in the genesis of the peri-Caribbean Cretaceous oceanic plateau province

The oceanic crust fragments exposed in central America, in north-western South America, and in the Caribbean islands have been considered to represent accreted remnants of the Caribbean-Colombian Oceanic Plateau (CCOP). On the basis of trace element and Nd, Sr, and Pb isotopic compositions we infer that cumulate rocks, basalts, and diabases from coastal Ecuador have a different source than the basalts from the Dominican Republic. The latter suite includes the 86 Ma basalts of the Duarte Complex which are light rare earth element (REE) -enriched and display (relative to normal mid-ocean ridge basalts, NMORB) moderate enrichments in large ion lithophile elements, together with high Nb, Ta, Pb, and low Th contents. Moreover, they exhibit a rather restricted range of Nd and Pb isotopic ratios consistent with their derivation from an ocean island-type mantle source, the composition of which includes the HIMU (high U-238/Pb-204) component characteristic of the Galapagos hotspot. In contrast, the 123 Ma Ecuadorian oceanic rocks have flat REE patterns and (relative to NMORB) are depleted in Zr, Hf, Th, and U. Moreover, they show a wide range of Nd and Pb isotopic ratios intermediate between those of ocean island basalts and NMORB. It is unlikely, on geochemical grounds, that the plume source of the Ecuadorian fragments was similar to that of the Galapagos. In addition, because of the NNE motion of the Farallon plate during the Early Cretaceous, the Ecuadorian oceanic plateau fragments could not have been derived from the Galapagos hotspot but were likely formed at a ridge-centered or near-ridge hotspot somewhere in the SE Pacific.

Informing the judgments of fingerprint analysts using quality metric and statistical assessment tools

The aim of this research was to evaluate how fingerprint analysts would incorporate information from newly developed tools into their decision making processes. Specifically, we assessed effects using the following: (1) a quality tool to aid in the assessment of the clarity of the friction ridge details, (2) a statistical tool to provide likelihood ratios representing the strength of the corresponding features between compared fingerprints, and (3) consensus information from a group of trained fingerprint experts. The measured variables for the effect on examiner performance were the accuracy and reproducibility of the conclusions against the ground truth (including the impact on error rates) and the analyst accuracy and variation for feature selection and comparison.¦The results showed that participants using the consensus information from other fingerprint experts demonstrated more consistency and accuracy in minutiae selection. They also demonstrated higher accuracy, sensitivity, and specificity in the decisions reported. The quality tool also affected minutiae selection (which, in turn, had limited influence on the reported decisions); the statistical tool did not appear to influence the reported decisions.

Cognitive Issues in Fingerprint Analysis: Inter- and Intra-Expert Consistency and the Effect of a "Target" Comparison

Deciding whether two fingerprint marks originate from the same source requires examination and comparison of their features. Many cognitive factors play a major role in such information processing. In this paper we examined the consistency (both between- and within-experts) in the analysis of latent marks, and whether the presence of a 'target' comparison print affects this analysis. Our findings showed that the context of a comparison print affected analysis of the latent mark, possibly influencing allocation of attention, visual search, and threshold for determining a 'signal'. We also found that even without the context of the comparison print there was still a lack of consistency in analysing latent marks. Not only was this reflected by inconsistency between different experts, but the same experts at different times were inconsistent with their own analysis. However, the characterization of these inconsistencies depends on the standard and definition of what constitutes inconsistent. Furthermore, these effects were not uniform; the lack of consistency varied across fingerprints and experts. We propose solutions to mediate variability in the analysis of friction ridge skin.

Integration of Pore Features into the Evaluation of Fingerprint Evidence

Fingerprint practitioners rely on level 3 features to make decisions in relation to the source of an unknown friction ridge skin impression. This research proposes to assess the strength of evidence associated with pores when shown in (dis)agreement between a mark and a reference print. Based upon an algorithm designed to automatically detect pores, a metric is defined in order to compare different impressions. From this metric, the weight of the findings is quantified using a likelihood ratio. The results obtained on four configurations and 54 donors show the significant contribution of the pore features and translate into statistical terms what latent fingerprint examiners have developed holistically through experience. The system provides LRs that are indicative of the true state under both the prosecution and the defense propositions. Not only such a system brings transparency regarding the weight to assign to such features, but also forces a discussion in relation to the risks of such a model to mislead.

Mesozoic sequence of Fuerteventura (Canary Islands): Witness of Early Jurassic sea-floor spreading in the central Atlantic

The Fuerteventura Jurassic sedimentary succession consists of oceanic and elastic deposits, the latter derived from the southwestern Moroccan continental margin. Normal mid-oceanic-ridge basalt (N-MORB) flows and breccias are found at the base of the sequence and witness sea-floor spreading events in the central Atlantic. These basalts were extruded in a postrift environment (post-late Pliensbachian), We propose a Toarcian age for the Atlantic oceanic floor in this region, on the basis of the presence higher up in the sequence of the Bositra buchi filament microfacies (Aalenian-Bajocian) and of elastic deposits reflecting tectono-eustatic events (e.g,, late Toarcian to mid-Callovian erosion of the rift shoulder). The S-l sea-floor oceanic magnetic anomaly west of Fuerteventura is therefore at least Toarcian in age. The remaining sequence records Atlantic-Tethyan basinal facies (e.g., Callovian-Oxfordian red clays, Aptian-Albian black shales) alternating with elastic deposits (e.g., Kimmeridgian-Berriasian periplatform calciturbidites and a Lower Cretaceous deep-sea fan system). The Fuerteventura N-MORB outcrops represent the only Early Jurassic oceanic basement described so far in the central Atlantic. They are covered by a 1600 m, nearly continuous sedimentary sequence which extends to Upper Cretaceous facies.

The Lithium, Boron and Beryllium content of serpentinized peridotites from ODP Leg 209 (Sites 1272A and 1274A): Implications for lithium and boron budgets of oceanic lithosphere

Despite the key importance of altered oceanic mantle as a repository and carrier of light elements (B, Li, and Be) to depth, its inventory of these elements has hardly been explored and quantified. In order to constrain the systematics and budget of these elements we have studied samples of highly serpentinized (>50%) spinel harzburgite drilled at the Mid-Atlantic Ridge (Fifteen-Twenty Fracture zone, ODP Leg 209, Sites 1272A and 1274A). In-situ analysis by secondary ion mass spectrometry reveals that the B, Li and Be contents of mantle minerals (olivine, orthopyroxene, and clinopyroxene) remain unchanged during serpentinization. B and Li abundances largely correspond to those of unaltered mantle minerals whereas Be is close to the detection limit. The Li contents of clinopyroxene are slightly higher (0.44-2.8 mu g g(-1)) compared to unaltered mantle clinopyroxene, and olivine and clinopyroxene show an inverse Li partitioning compared to literature data. These findings along with textural observations and major element composition obtained from microprobe analysis suggest reaction of the peridotites with a mafic silicate melt before serpentinization. Serpentine minerals are enriched in B (most values between 10 and 100 mu g g(-1)), depleted in Li (most values below I mu g g(-1)) compared to the primary phases, with considerable variation within and between samples. Be is at the detection limit. Analysis of whole rock samples by prompt gamma activation shows that serpentinization tends to increase B (10.4-65.0 mu g g(-1)), H2O and Cl contents and to lower Li contents (0.07-3.37 mu g g(-1)) of peridotites, implying that-contrary to alteration of oceanic crust-B is fractionated from Li and that the B and Li inventory should depend essentially on rock-water ratios. Based on our results and on literature data, we calculate the inventory of B and Li contained in the oceanic lithosphere, and its partitioning between crust and mantle as a function of plate characteristics. We model four cases, an ODP Leg 209-type lithosphere with almost no igneous crust, and a Semail-type lithosphere with a thick igneous crust, both at I and 75 Ma, respectively. The results show that the Li contents of the oceanic lithosphere are highly variable (17-307 kg in a column of I m x I m x thickness of the lithosphere (kg/col)). They are controlled by the primary mantle phases and by altered crust, whereas the B contents (25-904 kg/col) depend entirely on serpentinization. In all cases, large quantities of B reside in the uppermost part of the plate and could hence be easily liberated during slab dehydration. The most prominent input of Li into subduction zones is to be expected from Semail-type lithosphere because most of the Li is stored at shallow levels in the plate. Subducting an ODP Leg 209-type lithosphere would mean only very little Li contribution from the slab. Serpentinized mantle thus plays an important role in B recycling in subduction zones, but it is of lesser importance for Li. (C) 2008 Elsevier Ltd. All rights reserved.

Modelling the influence of change in fire regime on the local distribution of a Mediterranean pyrophytic plant species (Cistus salviifolius) at its northern range limit

Aims: To assess the potential distribution of an obligate seeder and active pyrophyte, Cistus salviifolius, a vulnerable species in the Swiss Red List; to derive scenarios by changing the fire return interval; and to discuss the results from a conservation perspective. A more general aim is to assess the impact of fire as a natural factor influencing the vegetation of the southern slopes of the Alps. Locations: Alps, southern Switzerland. Methods: Presence-absence data to fit the model were obtained from the most recent field mapping of C. salviifolius. The quantitative environmental predictors used in this study include topographic, climatic and disturbance (fire) predictors. Models were fitted by logistic regression and evaluated by jackknife and bootstrap approaches. Changes in fire regime were simulated by increasing the time-return interval of fire (simulating longer periods without fire). Two scenarios were considered: no fire in the past 15 years; or in the past 35 years. Results: Rock cover, slope, topographic position, potential evapotranspiration and time elapsed since the last fire were selected in the final model. The Nagelkerke R-2 of the model for C. salviifolius was 0.57 and the Jackknife area under the curve evaluation was 0.89. The bootstrap evaluation revealed model robustness. By increasing the return interval of fire by either up to 15 years, or 35 years, the modelled C. salviifolius population declined by 30-40%, respectively. Main conclusions: Although fire plays a significant role, topography and rock cover appear to be the most important predictors, suggesting that the distribution of C. salviifolius in the southern Swiss Alps is closely related to the availability of supposedly competition-free sites, such as emerging bedrock, ridge locations or steep slopes. Fire is more likely to play a secondary role in allowing C. salviifolius to extend its occurrence temporarily, by increasing germination rates and reducing the competition from surrounding vegetation. To maintain a viable dormant seed bank for C. salviifolius, conservation managers should consider carrying out vegetation clearing and managing wild fire propagation to reduce competition and ensure sufficient recruitment for this species.

Trace element partitioning in HP-LT metamorphic assemblages during subduction-related metamorphism, Ile de Groix, France: a detailed LA-ICPMS study

Devolatilization reactions and subsequent transfer of fluid from subducted oceanic crust into the overlying mantle wedge are important processes, which are responsible for the specific geochemical characteristics of subduction-related metamorphic rocks, as well as those of arc magmatism. To better understand the geochemical fingerprint induced by fluid mobilization during dehydration and rehydration processes related to subduction zone metamorphism, the trace element and rare earth element (REE) distribution patterns in HP-LT metamorphic assemblages in eclogite-, blueschist- and greenschist-facies rocks of the Ile de Groix were obtained by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) analysis. This study focuses on 10 massive basic rocks representing former hydrothermally altered mid-ocean ridge basalts (MORB), four banded basic rocks of volcano-sedimentary origin and one micaschist. The main hosts for incompatible trace elements are epidote (REE, Th, U, Pb, Sr), garnet [Y, heavy REE (HREE)], phengite (Cs, Rb, Ba, B), titanite [Ti, Nb, Ta, REE; HREE > LREE (light REE)], rutile (Ti, Nb, Ta) and apatite (REE, Sr). The trace element contents of omphacite, amphibole, albite and chlorite are low. The incompatible trace element contents of minerals are controlled by the stable metamorphic mineral assemblage and directly related to the appearance, disappearance and reappearance of minerals, especially epidote, garnet, titanite, rutile and phengite, during subduction zone metamorphism. Epidote is a key mineral in the trace element exchange process because of its large stability field, ranging from lower greenschist- to blueschist- and eclogite-facies conditions. Different generations of epidote are generally observed and related to the coexisting phases at different stages of the metamorphic cycle (e.g. lawsonite, garnet, titanite). Epidote thus controls most of the REE budget during the changing P-T conditions along the prograde and retrograde path. Phengite also plays an important role in determining the large ion lithophile element (LILE) budget, as it is stable to high P-T conditions. The breakdown of phengite causes the release of LILE during retrogression. A comparison of trace element abundances in whole-rocks and minerals shows that the HP-LT metamorphic rocks largely retain the geochemical characteristics of their basic, volcano-sedimentary and pelitic protoliths, including a hydrothermal alteration overprint before the subduction process. A large part of the incompatible trace elements remained trapped in the rocks and was recycled within the various metamorphic assemblages stable under changing metamorphic conditions during the subduction process, indicating that devolatilization reactions in massive basic rocks do not necessarily imply significant simultaneous trace element and REE release.

Investigation of the Reproductibility of Third-Level Characteristics

The process of comparing a fingermark recovered from a crime scene with the fingerprint taken from a known individual involves the characterization and comparison of different ridge details on both the mark and the print. Fingerprints examiners commonly classify these characteristics into three different groups, depending on their level of discriminating power. It is commonly considered that the general pattern of the ridge flow constitutes first-level detail, specific ridge flow and minutiaes (e.g. ending ridges, bifurcations) constitutes second-level detail, and fine ridge details (e. g. pore positions and shapes) are described as third-level details.In this study, the reproducibility of a selection of third-level characteristics is investigated. The reproducibility of these features is examined on serveral recordings of a same finger, first acquired using only optical visualization techniques and second on impressions developed using common firngermark development techniques. Prior to the evaluation of the reproducibility of the considered characteristics, digital images of the fingerprints were recorded at two different resolutions (1000 and 2000 ppi). This allowed the study to also examine the influence of higher resolution on the considered characteristics. It was observed that the increase in the resolution did not result in better feature detection or comparison between images.The examination of the reproducibility of a selection of third-level characteristics showed that the most reproducible features observed were minutiae shapes and pore positions along the ridges.

Association between Inflammatory and Obesity Markers in a Swiss Population-Based Sample (CoLaus Study).

Objective: To assess the associations between obesity markers (BMI, waist circumference and %body fat) and inflammatory markers (interleukin-1β (IL-1β); interleukin-6 (IL-6); tumor necrosis factor-α (TNF-α) and high-sensitivity C-reactive protein (hs-CRP)). Methods: Population sample of 2,884 men and 3,201 women aged 35-75 years. Associations were assessed using ridge regression adjusting for age, leisure-time physical activity, and smoking. Results: No differences were found in IL-1β levels between participants with increased obesity markers and healthy counterparts; multivariate regression showed %body fat to be negatively associated with IL-1β. Participants with high %body fat or abdominal obesity had higher IL-6 levels, but no independent association between IL-6 levels and obesity markers was found on multivariate regression. Participants with abdominal obesity had higher TNF-α levels, and positive associations were found between TNF-α levels and waist circumference in men and between TNF-α levels and BMI in women. Obese participants had higher hs-CRP levels, and these differences persisted after multivariate adjustment; similarly, positive associations were found between hs-CRP levels and all obesity markers studied. Conclusion: Obesity markers are differentially associated with cytokine levels. %Body fat is negatively associated with IL-1β; BMI (in women) and waist circumference (in men) are associated with TNF-α; all obesity markers are positively associated with hs-CRP. Copyright © 2012 S. Karger GmbH, Freiburg.

Evolution of a polymineralic mantle shear zone and the role of second phases in the localization of deformation

The influence of second phases (e.g., pyroxenes) on olivine grain size was studied by quantitative microfabric analyses of samples of the Hilti massif mantle shear zone (Semail ophiolite, Oman). The microstructures range from porphyroclastic tectonites to ultramylonites, from outside to the center of the shear zone. Starting at conditions of ridge-related flow, they formed under continuous cooling leading to progressive strain localization. The dependence of the average olivine grain size on the second-phase content can be split into a second-phase controlled and a dynamic recrystallization-controlled field. In the former, the olivine grain size is related to the ratio between the second-phase grain size and volume fraction (Zener parameter). In the latter, dynamic recrystallization manifested by a balance between grain growth and grain size reduction processes yields a stable olivine grain size. In both fields the average olivine and second-phase grain size decreases with decreasing temperature. Combining the microstructural information with deformation mechanism maps suggests that the porphyroclastic tectonites (similar to 1100 degrees C) and mylonites (similar to 800 degrees C) formed under the predominance of dislocation creep. Since olivine-rich layers are intercalated with layer parallel, polymineralic bands in the mylonites, nearly equiviscous conditions can be assumed. In the ultramylonites, diffusion creep represents the major deformation mechanism in the polymineralic layers. It is this switch in deformation mechanism from dislocation creep to diffusion creep that forces strain to localize in the fine-grained polymineralic domains at low temperatures (<similar to 700 degrees C), underlining the role of the second phases on strain localization in cooling mantle rocks.