Structural and electrical properties of Fe-doped TiO2 thin films

The present study discusses the effect of iron doping in TiO2 thin films deposited by rf sputtering. Iron doping induces a structural transformation from anatase to rutile and electrical measurements indicate that iron acts as an acceptor impurity. Thermoelectric power measurement shows a transition between n-type and p-type electrical conduction for an iron concentration around 0.13 at.%. The highest p-type conductivity at room temperature achieved by iron doping was 10(-6) S m(-1).

Linear relations between writhe and minimal crossing number in Conway families of ideal knots and links

We showed earlier how to predict the writhe of any rational knot or link in its ideal geometric configuration, or equivalently the average of the 3D writhe over statistical ensembles of random configurations of a given knot or link (Cerf and Stasiak 2000 Proc. Natl Acad. Sci. USA 97 3795). There is no general relation between the minimal crossing number of a knot and the writhe of its ideal geometric configuration. However, within individual families of knots linear relations between minimal crossing number and writhe were observed (Katritch et al 1996 Nature 384 142). Here we present a method that allows us to express the writhe as a linear function of the minimal crossing number within Conway families of knots and links in their ideal configuration. The slope of the lines and the shift between any two lines with the same

Diagnostic and identification in situ of fungal pathogens in superficial mycosis

Fungi are divided in 3 groups in the field of medical mycology. The dermatophytes are filamentous fungi able to grow on keratinized tissues from human or animals. They are the main cause of superficial and cutaneous mycoses of the skin and its appendix (hair and nail). The yeasts, or dimorphic fungi, can be responsible of diverse types of infections (superficial to deep mycoses). The moulds include all Non-dermatophyte Filamentous Fungi (NDF). In medical mycology, the most representative moulds are Aspergillus spp., Fusarium spp. and Mucor spp. Diagnosis of mycosis is currently based on direct mycological examination of biological samples, as well as macroscopic and microscopic identification of the infectious fungus in culture assay. However, culture assays were found to remain sterile in roughly 40% of cases otherwise positive by direct mycological examinations. Additionally, results from culture assays are often difficult to interpret as various NDF are sometimes isolated. This thesis work is composed of three projects focusing on the development of new assays for direct in situ identification of fungi from dermatological samples. Part 1. A Polymerase Chain Reaction - Terminal Restriction Fragment Length Polymorphism assay (PCR-TRFLP) targeting the 28S rDNA was developed to identify dermatophytes and NDF in nails with suspected onychomycosis. This method is faster and more efficient than culture. It further enables the distinction of more than one agent in case of mixed infection. A fast and reliable assay for the identification of dermatophytes and NDF in onychomycosis was found to be highly relevant since onychomycosis with Fusarium spp. or other NDF are weakly responsive or unresponsive to standard onychomycosis treatments with oral terbinafine and itraconazole. Part 2. A nested PCR-sequencing assay targeting the 28S rDNA was developed to identify dermatophyte species in skin and hair samples. This method is especially suitable for tinea capitis where dermatophytes identification is critical for subsequently prescribing the adequate treatment. The challenge presented when performing direct PCR fungi identification in skin and hair differs from that seen in onychomycosis as small amount of material is generally collected, few fungal elements are present in the clinical sample and one dermatophyte among a dozen species must be identified. Part 3. Fusarium spp. is currently isolated from nails with a frequency of 15% of that of dermatophytes in the laboratory of Mycology of the CHUV (2005-2012). The aim of this work was to examine if the intensive use of terbinafine and itraconazole could be a cause of the high incidence of Fusarium nail infections. For that purpose, two different methods, specific PCR and TRFLP, were used to detect both Fusarium spp. and Trichophyton spp. in nails of previously treated or untreated patients. TRFLP assay was found to be less sensitive than classical PCR assays specifically detecting Fusarium spp. or Trichophyton spp. Independently of the detection method used, the prevalence of Fusarium spp. appears not to be higher in patients previously treated by oral standard treatment with terbinafine and azoles which are highly effective to fight Trichophyton spp. in nails. In many cases Fusarium sp. was detected in samples of patients not previously subjected to antifungal therapy. Therefore, these treatments do not appear to favor the establishment of Fusarium spp. after elimination of a dermatophyte in nail infection. - En mycologie médicale, les champignons sont classés en 3 groupes. Les dermatophytes sont des champignons filamenteux capables de se développer dans les tissus kératinisés des hommes et des animaux, ils représentent la principale cause des mycoses superficielles et cutanées de la peau et de ses appendices (ongles et cheveux). Les levures, ou champignons dimorphiques, peuvent être responsables de divers types d'infections (superficielles à profondes). Les moisissures incluent tous les champignons filamenteux non-dermatophytes (NDF), les Aspergillus spp., les Fusarium spp. et les Mucor spp. sont les principales espèces rencontrées. Le diagnostic d'une mycose est basé sur un examen mycologique direct des prélèvements biologiques ainsi que sur l'identification macroscopique et microscopique du champignon infectieux isolé en culture. Cependant, dans environ 40% des cas, l'identification de l'agent pathogène est impossible par cette méthode car la culture reste stérile, bien que l'examen direct soit positif. De plus, la croissance de moisissures et/ou autres contaminants peut rendre l'interprétation de l'examen difficile. Ce travail de thèse est composé de trois projets focalisés sur le développement de nouvelles méthodes d'identification des champignons directement à partir d'échantillons dermatologiques. Projet 1. Une méthode de Réaction en chaîne de polymérase couplée à du polymorphisme de longueur des fragments de restriction terminaux (PCR-TRFLP), en ciblant l'ADN ribosomal 28S, a été développée pour l'identification des dermatophytes et moisissures dans les ongles avec suspicion d'onychomycoses. Cette technique s'est avérée plus rapide et plus efficace que la culture, permettant l'identification de plusieurs champignons en même temps. Posséder une méthode d'identification rapide et fiable des dermatophytes et des NDF dans les onychomycoses a été jugée nécessaire du fait que les Fusarium et d'autres NDF sont peu ou pas sensibles aux traitements oraux standards à la terbinafine et à Γ itraconazole. Projet 2. Une PCR nichée couplée au séquençage d'un fragment de l'ADN ribosomal 28S a été développée afin de différencier les dermatophytes dans la peau et les cheveux. Cette méthode est particulièrement adaptée au cas de tinea capitis, où l'identification du dermatophyte est essentielle afin de prescrire le traitement adéquat. Le problème de l'identification du pathogène fongique dans les cheveux et la peau diffère des onychomycoses car de petites quantités sont prélevées chez les patients, peu d'éléments fongiques sont présents et il faut discriminer un dermatophyte parmi une douzaine d'espèces potentielles. Projet 3. Au laboratoire de Mycologie du CHUV, les Fusarium ont été isolé dans les ongles à une fréquence de 15% pour la période 2005-2012. Le but de ce travail était d'examiner si l'utilisation intensive de terbinafine et d'itraconazole pouvait être une des causes de la forte incidence des infections des ongles par Fusarium. A cet effet, deux méthodes ont été utilisées pour détecter à la fois Fusarium spp. et Trichophyton spp., la PCR spécifique et le TRFLP. Indépendamment de la méthode choisie, il en résulte que la prévalence des Fusarium η'apparaît pas liée à un traitement au préalable des patients avec de la terbinafine ou des azoles, thérapies très efficaces contre les Trichophyton spp. dans les ongles. De plus, il existe de nombreux cas où Fusarium était détecté chez des patients non traités.

Dynamic Modelling of Material Flows and Sustainable Resource Use: Case Studies in Regional Metabolism and Space Life Support Systems

Sustainable resource use is one of the most important environmental issues of our times. It is closely related to discussions on the 'peaking' of various natural resources serving as energy sources, agricultural nutrients, or metals indispensable in high-technology applications. Although the peaking theory remains controversial, it is commonly recognized that a more sustainable use of resources would alleviate negative environmental impacts related to resource use. In this thesis, sustainable resource use is analysed from a practical standpoint, through several different case studies. Four of these case studies relate to resource metabolism in the Canton of Geneva in Switzerland: the aim was to model the evolution of chosen resource stocks and flows in the coming decades. The studied resources were copper (a bulk metal), phosphorus (a vital agricultural nutrient), and wood (a renewable resource). In addition, the case of lithium (a critical metal) was analysed briefly in a qualitative manner and in an electric mobility perspective. In addition to the Geneva case studies, this thesis includes a case study on the sustainability of space life support systems. Space life support systems are systems whose aim is to provide the crew of a spacecraft with the necessary metabolic consumables over the course of a mission. Sustainability was again analysed from a resource use perspective. In this case study, the functioning of two different types of life support systems, ARES and BIORAT, were evaluated and compared; these systems represent, respectively, physico-chemical and biological life support systems. Space life support systems could in fact be used as a kind of 'laboratory of sustainability' given that they represent closed and relatively simple systems compared to complex and open terrestrial systems such as the Canton of Geneva. The chosen analysis method used in the Geneva case studies was dynamic material flow analysis: dynamic material flow models were constructed for the resources copper, phosphorus, and wood. Besides a baseline scenario, various alternative scenarios (notably involving increased recycling) were also examined. In the case of space life support systems, the methodology of material flow analysis was also employed, but as the data available on the dynamic behaviour of the systems was insufficient, only static simulations could be performed. The results of the case studies in the Canton of Geneva show the following: were resource use to follow population growth, resource consumption would be multiplied by nearly 1.2 by 2030 and by 1.5 by 2080. A complete transition to electric mobility would be expected to only slightly (+5%) increase the copper consumption per capita while the lithium demand in cars would increase 350 fold. For example, phosphorus imports could be decreased by recycling sewage sludge or human urine; however, the health and environmental impacts of these options have yet to be studied. Increasing the wood production in the Canton would not significantly decrease the dependence on wood imports as the Canton's production represents only 5% of total consumption. In the comparison of space life support systems ARES and BIORAT, BIORAT outperforms ARES in resource use but not in energy use. However, as the systems are dimensioned very differently, it remains questionable whether they can be compared outright. In conclusion, the use of dynamic material flow analysis can provide useful information for policy makers and strategic decision-making; however, uncertainty in reference data greatly influences the precision of the results. Space life support systems constitute an extreme case of resource-using systems; nevertheless, it is not clear how their example could be of immediate use to terrestrial systems.

Clinicopathological features of eyelid skin tumors. A retrospective study of 5504 cases and review of literature.

Eyelid tumors are the most common neoplasm in daily ophthalmology practice and encompass a wide variety of benign and malignant tumors. In this retrospective study, we report the clinical and histological features of 5504 eyelid skin tumors diagnosed at the Laboratory of Ophthalmopathology of the Hôpital Ophtalmique Jules Gonin, Lausanne, Switzerland, between January 1989 and December 2007. Benign tumors largely predominated over malignant ones, representing 84% of cases in this series, and the 5 most frequent subtypes were squamous cell papilloma (26%), seborrheic keratosis (21%), melanocytic nevus (20%), hidrocystoma (8%), and xanthoma/xanthelasma (6%). Basal cell carcinoma was the most frequent malignant tumor (86%), followed by squamous cell carcinoma (7%) and sebaceous carcinoma (3%). For several tumor subtypes, there was a poor correlation between clinical and histological diagnosis, stressing the numerous pitfalls in the diagnosis of eyelid tumors. We further discuss our results with reference to previously published series.

Contribution to the Development of the LHCb Vertex Locator Readout Electronics

L'expérience LHCb sera installée sur le futur accélérateur LHC du CERN. LHCb est un spectromètre à un bras consacré aux mesures de précision de la violation CP et à l'étude des désintégrations rares des particules qui contiennent un quark b. Actuellement LHCb se trouve dans la phase finale de recherche et développement et de conception. La construction a déjà commencé pour l'aimant et les calorimètres. Dans le Modèle Standard, la violation CP est causée par une phase complexe dans la matrice 3x3 CKM (Cabibbo-Kobayashi-Maskawa) de mélange des quarks. L'expérience LHCb compte utiliser les mesons B pour tester l'unitarité de cette matrice, en mesurant de diverses manières indépendantes tous les angles et côtés du "triangle d'unitarité". Cela permettra de surdéterminer le modèle et, peut-être, de mettre en évidence des incohérences qui seraient le signal de l'existence d'une physique au-delà du Modèle Standard. La reconstruction du vertex de désintégration des particules est une condition fondamentale pour l'expérience LHCb. La présence d'un vertex secondaire déplacé est une signature de la désintégration de particules avec un quark b. Cette signature est utilisée dans le trigger topologique du LHCb. Le Vertex Locator (VeLo) doit fournir des mesures précises de coordonnées de passage des traces près de la région d'interaction. Ces points sont ensuite utilisés pour reconstruire les trajectoires des particules et l'identification des vertices secondaires et la mesure des temps de vie des hadrons avec quark b. L'électronique du VeLo est une partie essentielle du système d'acquisition de données et doit se conformer aux spécifications de l'électronique de LHCb. La conception des circuits doit maximiser le rapport signal/bruit pour obtenir la meilleure performance de reconstruction des traces dans le détecteur. L'électronique, conçue en parallèle avec le développement du détecteur de silicium, a parcouru plusieurs phases de "prototyping" décrites dans cette thèse.<br/><br/>The LHCb experiment is being built at the future LHC accelerator at CERN. It is a forward single-arm spectrometer dedicated to precision measurements of CP violation and rare decays in the b quark sector. Presently it is finishing its R&D and final design stage. The construction already started for the magnet and calorimeters. In the Standard Model, CP violation arises via the complex phase of the 3 x 3 CKM (Cabibbo-Kobayashi-Maskawa) quark mixing matrix. The LHCb experiment will test the unitarity of this matrix by measuring in several theoretically unrelated ways all angles and sides of the so-called "unitary triangle". This will allow to over-constrain the model and - hopefully - to exhibit inconsistencies which will be a signal of physics beyond the Standard Model. The Vertex reconstruction is a fundamental requirement for the LHCb experiment. Displaced secondary vertices are a distinctive feature of b-hadron decays. This signature is used in the LHCb topology trigger. The Vertex Locator (VeLo) has to provide precise measurements of track coordinates close to the interaction region. These are used to reconstruct production and decay vertices of beauty-hadrons and to provide accurate measurements of their decay lifetimes. The Vertex Locator electronics is an essential part of the data acquisition system and must conform to the overall LHCb electronics specification. The design of the electronics must maximise the signal to noise ratio in order to achieve the best tracking reconstruction performance in the detector. The electronics is being designed in parallel with the silicon detector development and went trough several prototyping phases, which are described in this thesis.

Objective assessment of low contrast detectability in computed tomography with Channelized Hotelling Observer.

PURPOSE: Iterative algorithms introduce new challenges in the field of image quality assessment. The purpose of this study is to use a mathematical model to evaluate objectively the low contrast detectability in CT. MATERIALS AND METHODS: A QRM 401 phantom containing 5 and 8 mm diameter spheres with a contrast level of 10 and 20 HU was used. The images were acquired at 120 kV with CTDIvol equal to 5, 10, 15, 20 mGy and reconstructed using the filtered back-projection (FBP), adaptive statistical iterative reconstruction 50% (ASIR 50%) and model-based iterative reconstruction (MBIR) algorithms. The model observer used is the Channelized Hotelling Observer (CHO). The channels are dense difference of Gaussian channels (D-DOG). The CHO performances were compared to the outcomes of six human observers having performed four alternative forced choice (4-AFC) tests. RESULTS: For the same CTDIvol level and according to CHO model, the MBIR algorithm gives the higher detectability index. The outcomes of human observers and results of CHO are highly correlated whatever the dose levels, the signals considered and the algorithms used when some noise is added to the CHO model. The Pearson coefficient between the human observers and the CHO is 0.93 for FBP and 0.98 for MBIR. CONCLUSION: The human observers' performances can be predicted by the CHO model. This opens the way for proposing, in parallel to the standard dose report, the level of low contrast detectability expected. The introduction of iterative reconstruction requires such an approach to ensure that dose reduction does not impair diagnostics.