Constraining 3-D electrical resistance tomography with GPR reflection data forimproved aquifer characterization

Surface-based ground penetrating radar (GPR) and electrical resistance tomography (ERT) are common tools for aquifer characterization, because both methods provide data that are sensitive to hydrogeologically relevant quantities. To retrieve bulk subsurface properties at high resolution, we suggest incorporating structural information derived from GPR reflection data when inverting surface ERT data. This reduces resolution limitations, which might hinder quantitative interpretations. Surface-based GPR reflection and ERT data have been recorded on an exposed gravel bar within a restored section of a previously channelized river in northeastern Switzerland to characterize an underlying gravel aquifer. The GPR reflection data acquired over an area of 240×40 m map the aquifer's thickness and two internal sub-horizontal regions with different depositional patterns. The interface between these two regions and the boundary of the aquifer with then underlying clay are incorporated in an unstructured ERT mesh. Subsequent inversions are performed without applying smoothness constraints across these boundaries. Inversion models obtained by using these structural constraints contain subtle resistivity variations within the aquifer that are hardly visible in standard inversion models as a result of strong vertical smearing in the latter. In the upper aquifer region, with high GPR coherency and horizontal layering, the resistivity is moderately high (N300 Ωm). We suggest that this region consists of sediments that were rearranged during more than a century of channelized flow. In the lower low coherency region, the GPR image reveals fluvial features (e.g., foresets) and generally more heterogeneous deposits. In this region, the resistivity is lower (~200 Ωm), which we attribute to increased amounts of fines in some of the well-sorted fluvial deposits. We also find elongated conductive anomalies that correspond to the location of river embankments that were removed in 2002.

Low latitude Paleocene to early Eocene radiolarian systematics, biochronology and paleoenvironmental analysis

Highly diverse radiolarian faunas of latest Maastrichtian to early Eocene age have been recovered from the low latitude realm in order to contribute to the clarification of radiolarian taxonomy, construct a zonation based on a discrete sequence of co-existence intervals of species ranging from the late Paleocene to early Eocene and to describe a rich low latitude latest Cretaceous to late Paleocene fauna. 225 samples of late Paleocene to early Eocene age have been collected from ODP Leg 171 B-Hole 1051 A (Blake Nose), DSDP Leg 43-Site 384 (Northwest Atlantic) and DSDP Leg 10-Sites 86, 94, 95, 96. Sequences consist of mainly pelagic oozes and chalks, with some clay and ash layers. A new imaging technique is devised to perform (in particular on topotypic material) both transmitted light microscopy and SEM imaging on individual radiolarian specimens. SEM precedes transmitted light imaging. Radiolarians are adhered to a cover slip (using nail varnish) which is secured to a stub using conductive levers. Specimens are then photographed in low vacuum (40-50Pa; 0.5mbar), which enables charge neutralization by ionized molecules of the chamber atmosphere. Thus gold coating is avoided and subsequently this allows transmitted light imaging to follow. The conductive levers are unscrewed and the cover slip is simply overturned and mounted with Canada balsam. In an attempt towards a post-Haeckelian classification, the initial spicule (Entactinaria), micro- or macrosphere (Spumellaria) and initial spicule and cephalis (Nassellaria) have been studied by slicing Entactinaria and Spumellaria, and by tilting Nassellaria in the SEM chamber. A new genus of the family Coccodiscidae is erected and Spongatractus HAECKEL is re-located to the subfamily Axopruinae. The biochronology has been carried out using the Unitary Association Method (Guex 1977, 1991). A database recording the occurrences of 112 species has been used to establish a succession of 22 Unitary Associations. Each association is correlated to chronostratigraphy via calcareous microfossils that were previously studied by other authors. The 22 UAs have been united into seven Unitary Associations Zones (UAZones) (JP10- JE4). The established zones permit to distinguish supplementary subdivisions within the existing zonation. The low-latitude Paleocene radiolarian zonation established by Sanfilippo and Nigrini (1998a) is incomplete due to the lack of radiolarian-bearing early Paleocene sediments. In order to contribute to the study of sparsely known low latitude early Paleocene faunas, 80 samples were taken from the highly siliceous Guayaquil Formation (Ecuador). The sequence consists of black cherts, shales, siliceous limestones and volcanic ash layers. The carbonate content increases up section. Age control is supplied by sporadic occurrences of silicified planktonic foraminifera casts. One Cretaceous zone and seven Paleocene zones have been identified. The existing zonation for the South Pacific can be applied to the early-early late Paleocene sequence, although certain marker species have significantly shorter ranges (notably Buryella foremanae and B. granulata). Despite missing marker species in the late Paleocene, faunal distribution correlates reasonably to the Low-Latitude zonation. An assemblage highly abundant in Lithomelissa, Lophophaena and Cycladophora in the upper RP6 zone (correlated by the presence of Pterocodon poculum, Circodiscus circularis, Pterocodon? sp. aff. P. tenellus and Stylotrochus nitidus) shows a close affinity to contemporaneous faunas reported from Site 1121, Campbell Plateau. Coupled with a high diatom abundance (notably Aulacodiscus spp. and Arachnoidiscus spp.), these faunas are interpreted as reflecting a period of enhanced biosiliceous productivity during the late Paleocene. The youngest sample is void of radiolarians, diatoms and sponge spicules yet contains many pyritized infaunal benthic foraminifera which are akin to the midway-type fauna. The presence of this fauna suggests deposition in a neritic environment. This is in contrast to the inferred bathyal slope depositional environment of the older Paleocene sediments and suggests a shoaling of the depositional environment which may be related to a coeval major accretionary event. RESUME DE LA THESE Des faunes de radiolaires de basses latitudes très diversifiées d'âge Maastrichtien terminal à Eocène inférieur, ont été étudiées afin de contribuer à la clarification de leur taxonomie, de construire une biozonation basée sur une séquence discrète d'intervalles de coexistence des espèces d'age Paléocène supérieur à Eocène inférieur et de décrire une riche faune de basse latitude allant du Crétacé terminal au Paléocène supérieur. L'étude de cette faune contribue particulièrement à la connaissance des insaisissables radiolaires de basses latitudes du Paléocène inférieur. 225 échantillons d'âge Paléocène supérieur à Eocène inférieur provenant des ODP Leg 171B-Site 1051A (Blake Nose), Leg DSDP 43-Site 384 (Atlantique Nord -Ouest) et des DSDP Leg 10 -Sites 86, 94, 95, 96, ont été étudiés. Ces séquences sont constituées principalement de « ooze » et de « chalks »pélagiques ainsi que de quelques niveaux de cendres et d'argiles. Une nouvelle technique d'imagerie a été conçue afin de pouvoir prendre conjointement des images en lumière transmise et au Microscope Electronique à Balayage (MEB) de spécimens individuels. Ceci à été particulièrement appliqué à l'étude des topotypes. L'imagerie MEB précède l'imagerie en lumière transmise. Les radiolaires sont collés sur une lame pour micropaléontologie (au moyen de vernis à ongles) qui est ensuite fixée à un porte-objet à l'aide de bras métalliques conducteurs. Les spécimens sont ensuite photographiés en vide partiel (40-50Pa; 0.5mbar), ce qui permet la neutralisation des charges électrostatiques dues à la présence de molécules ionisées dans l'atmosphère de la chambre d'observation. Ainsi la métallisation de l'échantillon avec de l'or n'est plus nécessaire et ceci permet l'observation ultérieure en lumière transmise. Les bras conducteurs sont ensuite dévissés et la lame est simplement retournée et immergée dans du baume du Canada. Dans une approche de classification post Haeckelienne, le spicule initial (Entactinaires), la micro- ou macro -sphère (Spumellaires) et le spicule initial et cephalis (Nassellaires) ont été étudiés. Ceci a nécessité le sectionnement d'Entactinaires et de Spumellaires, et de pivoter les Nassellaires dans la chambre d'observation du MEB. Un nouveau genre de la Famille des Coccodiscidae a été érigé et Spongatractus HAECKEL à été réassigné à la sous-famille des Axopruninae. L'analyse biostratigraphique à été effectuée à l'aide de la méthode des Associations Unitaires {Guex 1977, 1991). Une base de données enregistrant les présences de 112 espèces à été utilisée poux établir une succession de 22 Associations Unitaires. Chaque association est corrélée à la chronostratigraphie au moyen de microfossiles calcaires précédemment étudiés par d'autres auteurs. Les 22 UAs ont été combinées en sept Zones d'Associations Unitaires (UAZones) (JP10- JE4). Ces Zones permettent d'insérer des subdivisions supplémentaires dans la zonation actuelle. La zonation de basses latitudes du Paléocène établie par Sanfilippo et Nigrini (1998a) est incomplète due au manque de sédiments du Paléocène inférieur contenant des radiolaires. Afin de contribuer à l'étude des faunes peu connues des basses latitudes du Paléocène inférieur, 80 échantillons ont été prélevés d'une section siliceuse de la Formation de Guayaquil (Equateur). La séquence est composée de cherts noirs, de shales, de calcaires siliceux et de couches de cendres volcaniques. La fraction carbonatée augmente vers le haut de la section. Des contraintes chronologiques sont fournies par la présence sporadique de moules de foraminifères planctoniques. Une zone d'intervalles du Crétacé et sept du Paléocène ont été mises en évidence. Bien que certaines espèces marqueur ont des distributions remarquablement plus courtes (notamment Buryella foremanae et B. granulata), la zonation existante pour le Pacifique Sud est applicable à la séquence d'age Paléocène inférieure à Paléocène supérieur basal étudiée. Malgré l'absence d'espèces marqueur du Paléocène supérieur, la succession faunistique se corrèle raisonnablement avec la zonation pour les basses latitudes. Un assemblage contenant d'abondants représentant du genre Lithomelissa, Lophophaena et Cycladophora dans la zone RP6 (correlée par la présence de Pterocodon poculum, Circodiscus circularis, Pterocodon? sp. aff. P. tenellus et Stylotrochus nitidus) montre une grande similitude avec certaines faunes issues des hauts latitudes et d'age semblable décrites par Hollis (2002, Site 1121, Campbell Plateau). Ceci, en plus d'une abondance importante en diatomés (notamment Aulacodiscus spp. et Arachnoidiscus spp.) nous mènent à interpréter cette faune comme témoin d'un épisode de productivité biosiliceuse accrue dans le Paléocène supérieur. L'échantillon le plus jeune, dépourvu de radiolaires, de diatomés et de spicules d'éponge contient de nombreux foraminifères benthiques infaunaux pyritisés. Les espèces identifiées sont caractéristiques d'une faune de type midway. La présence de ces foraminifères suggère un environnement de type néritique. Ceci est en contraste avec l'environnement de pente bathyale caractérisent les sédiments sous-jacent. Cette séquence de diminution de la tranche d'eau peut être associée à un événement d'accrétion majeure. RESUME DE LA THESE (POUR LE GRAND PUBLIC) Les radiolaires constituent le groupe de plancton marin le plus divers et le plus largement répandu de l'enregistrement fossile. Un taux d'évolution rapide et une variation géographique considérable des populations font des radiolaires un outil de recherche sans égal pour la biostratigraphie et la paléocéanographie. Néanmoins, avant de pouvoir les utiliser comme outils de travail, il est essentiel d'établir une solide base taxonomique. L'étude des Radiolaires peut impliquer plusieurs techniques d'extraction, d'observation et d'imagerie qui sont dépendantes du degré d'altération diagénétique des spécimens. Le squelette initial, qu'il s'agisse d'un spicule initial (Entactinaria), d'une micro- ou macro -sphère (Spumellaria) ou d'un spicule initial et d'un cephalis (Nassellaria), est l'élément le plus constant au cours de l'évolution et devrait représenter le fondement de la systématique. Des échantillons provenant de carottes de basses latitudes du Deep Sea Drilling Project et de l' Ocean Drilling ont été étudiés. De nouvelles techniques d'imagerie et de sectionnement ont été développées sur des topotypes de radiolaires préservés en opale, dans le but d'étudier les caractéristiques de leur squelette initial qui n'étaient pas visibles dans leur illustration originale. Ceci aide entre autre à comparer des spécimens recristallisés en quartz, provenant de terrains accrétés, avec les holotypes en opale de la littérature. La distribution des espèces étudiés a fourni des données biostratigraphiques qui ont été compilées à l'aide de la méthode des Associations Unitaires (Guez 1977, 1991). Il s'agit d'un modèle mathématique déterministe conçu pour exploiter la totalité de l'assemblage plutôt que de se confiner à l'utilisation de taxons marqueurs individuels. Une séquence de 22 Associations Unitaires a été établie pour la période allant du Paléocène supérieur à l'Éocène inférieur. Chaque Association Unitaire a été corrélée à l'échelle de temps absolue à l'aide de microfossiles calcaires. Les 22 UAs ont été combinées en sept Zones d'Associations Unitaires (JP10- JE4). Ces Zones permettent d'insérer des subdivisions supplémentaires dans la zonation actuelle. Les radiolaires du Paléocène inférieur à moyen des basses latitudes sont rares. Les meilleures sections connues se trouvent dans les hautes latitudes (Nouvelle Zélande). Quelques assemblages épars ont été mentionnés par le passé en Californie, en Équateur et en Russie. Une séquence siliceuse de 190 mètres dans la Formation de Guayaquil (Équateur), s'étendant du Maastrichtien supérieur au Paléocène supérieur, a fourni des faunes relativement bien préservées. L'étude de ces faunes a permis de mettre en évidence la première séquence complète de radiolaires de basses latitudes dans le Paléocène inférieure. Huit zones allant du Crétacé terminal au Paléocène supérieur ont pu être appliqués et la présence de foraminifères planctoniques a fournie plusieurs points d'attache chronologiques. Dans le Paléocène supérieur, un riche assemblage contenant d'abondants diatomés et radiolaires ayant des similitudes faunistiques marquantes avec des assemblages de hautes latitudes de Nouvelle Zélande, témoigne d'un épisode de productivité biosiliceuse accrue pendant cette période. Étant donné que la pointe du continent sud-américain et l'Antarctique étaient plus proches au cours du Paléocène, ce phénomène peut être expliqué par le transport, le long de la côte ouest de l'Amérique du Sud, d'eaux riches en nutriments en provenance de l'Océan Antarctique. Suite à cet épisode, l'enregistrement en radiolaires est interrompu. Ceci peut être associé à des événements tectoniques régionaux qui ont eu pour effet de diminuer la tranche d'eau relative, rendant l'environnement plus favorable aux foraminifères benthiques qui sont abondamment présents dans l'échantillon le plus jeune de la séquence.

Clinical effectiveness of direct class II restorations: a meta-analysis.

Purpose: More than five hundred million direct dental restorations are placed each year worldwide. In about 55% of the cases, resin composites or compomers are used, and in 45% amalgam. The longevity of posterior resin restorations is well documented. However, data on resin composites that are placed without enamel/dentin conditioning and resin composites placed with self-etching adhesive systems are missing. Material and Methods: The database SCOPUS was searched for clinical trials on posterior resin composites without restricting the search to the year of publication. The inclusion criteria were: (1) prospective clinical trial with at least 2 years of observation; (2) minimum number of restorations at last recall = 20; (3) report on dropout rate; (4) report of operative technique and materials used; (5) utilization of Ryge or modified Ryge evaluation criteria. For amalgam, only those studies were included that directly compared composite resin restorations with amalgam. For the statistical analysis, a linear mixed model was used with random effects to account for the heterogeneity between the studies. P-values under 0.05 were considered significant. Results: Of the 373 clinical trials, 59 studies met the inclusion criteria. In 70% of the studies, Class II and Class I restorations had been placed. The overall success rate of composite resin restorations was about 90% after 10 years, which was not different from that of amalgam. Restorations with compomers had a significantly lower longevity. The main reason for replacement were bulk fractures and caries adjacent to restorations. Both of these incidents were infrequent in most studies and accounted only for about 6% of all replaced restorations after 10 years. Restorations with macrofilled composites and compomer suffered significantly more loss of anatomical form than restorations with other types of material. Restorations that were placed without enamel acid etching and a dentin bonding agent showed significantly more marginal staining and detectable margins compared to those restorations placed using the enamel-etch or etch-and-rinse technique; restorations with self-etching systems were between the other groups. Restorations with compomer suffered significantly more chippings (repairable fracture) than restorations with other materials, which did not statistically differ among each other. Restorations that were placed with a rubber-dam showed significantly fewer material fractures that needed replacement, and this also had a significant effect on the overall longevity. Conclusion: Restorations with hybrid and microfilled composites that were placed with the enamel-etching technique and rubber-dam showed the best overall performance; the longevity of these restorations was similar to amalgam restorations. Compomer restorations, restorations placed with macrofilled composites, and resin restorations with no-etching or self-etching adhesives demonstrated significant shortcomings and shorter longevity.

Construction mechanisms and thermal evolution of upper crustal intrusions : the Saint-Jean-du-Doigt bimodal intrusion (Brittany, France)

Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.

Constrained peptidomimetics reveal detailed geometric requirements of covalent prolyl oligopeptidase inhibitors.

Prolyl oligopeptidases cleave peptides on the carboxy side of internal proline residues and their inhibition has potential in the treatment of human brain disorders. Using our docking program fitted, we have designed a series of constrained covalent inhibitors, built from a series of bicyclic scaffolds, to study the optimal shape required for these small molecules. These structures bear nitrile functional groups that we predicted to covalently bind to the catalytic serine of the enzyme. Synthesis and biological assays using human brain-derived astrocytic cells and endothelial cells and human fibroblasts revealed that these compounds act as selective inhibitors of prolyl oligopeptidase activity compared to prolyl-dipeptidyl-aminopeptidase activity, are able to penetrate the cells and inhibit intracellular activities in intact living cells. This integrated computational and experimental study shed light on the binding mode of inhibitors in the enzyme active site and will guide the design of future drug-like molecules.

Injury pattern of the Flash-Ball, a less-lethal weapon used for law enforcement: report of two cases and review of the literature.

Less-lethal weapons are used in law enforcement to neutralize combative individuals and to disperse riot crowds. Local police recently used such an impact weapon, the Flash-Ball, in two different situations. This gun fires large rubber bullets with kinetic energies around 200 J. Although it is designed to avoid skin penetration, impacts at such energies may still create major trauma with associated severe injuries to internal organs. This is a report of 2 patients shot with the Flash-Ball who required medical attention. One could be discharged quickly, but the other required hospitalization for heart and lung contusion. Both patients required advanced investigations including computed tomography (CT) scan. The medical literature on injuries induced by less-lethal impact weapons is reviewed. Impacts from the Flash-Ball can cause significant injury to internal organs, even without penetration. Investigations as for other high-energy blunt traumas are called for in these cases.

Naphthylamine, 2-

2-Naphthylamine (2NA, CAS # 91-59-8) was used in as an intermediate in the dye industry and in the rubber industry. 2NA is frequently produced when nitrogenous organic materials are burned or heated. Tobacco smoke, heated cooking oil, and many other smokes contain 2NA as well as other aromatic amines. 2NA is among the most potent human urinary bladder carcinogens. It is well absorbed by all routes.

Modelling of iron-filled magneto-active polymers with a dispersed chain-like microstructure

Magneto-active polymers are a class of smart materials commonly manufactured by mixing micron-sized iron particles in a rubber-like matrix. When cured in the presence of an externally applied magnetic field, the iron particles arrange themselves into chain-like structures that lend an overall anisotropy to the material. It has been observed through electron micrographs and X-ray tomographs that these chains are not always perfect in structure, and may have dispersion due to the conditions present during manufacturing or some undesirable material properties. We model the response of these materials to coupled magneto-mechanical loading in this paper using a probability based structure tensor that accounts for this imperfect anisotropy. The response of the matrix material is decoupled from the chain phase, though still being connected through kinematic constraints. The latter is based on the definition of a 'chain deformation gradient' and a 'chain magnetic field'. We conclude with numerical examples that demonstrate the effect of chain dispersion on the response of the material to magnetoelastic loading.

Meta-analysis of the influence of bonding parameters on the clinical outcome of tooth-colored cervical restorations

PURPOSE: To meta-analyze the literature on the clinical performance of Class V restorations to assess the factors that influence retention, marginal integrity, and marginal discoloration of cervical lesions restored with composite resins, glass-ionomer-cement-based materials [glass-ionomer cement (GIC) and resin-modified glass ionomers (RMGICs)], and polyacid-modified resin composites (PMRC). MATERIALS AND METHODS: The English literature was searched (MEDLINE and SCOPUS) for prospective clinical trials on cervical restorations with an observation period of at least 18 months. The studies had to report about retention, marginal discoloration, marginal integrity, and marginal caries and include a description of the operative technique (beveling of enamel, roughening of dentin, type of isolation). Eighty-one studies involving 185 experiments for 47 adhesives matched the inclusion criteria. The statistical analysis was carried out by using the following linear mixed model: log (-log (Y /100)) = β + α log(T ) + error with β = log(λ), where β is a summary measure of the non-linear deterioration occurring in each experiment, including a random study effect. RESULTS: On average, 12.3% of the cervical restorations were lost, 27.9% exhibited marginal discoloration, and 34.6% exhibited deterioration of marginal integrity after 5 years. The calculation of the clinical index was 17.4% of failures after 5 years and 32.3% after 8 years. A higher variability was found for retention loss and marginal discoloration. Hardly any secondary caries lesions were detected, even in the experiments with a follow-up time longer than 8 years. Restorations placed using rubber-dam in teeth whose dentin was roughened showed a statistically significantly higher retention rate than those placed in teeth with unprepared dentin or without rubber-dam (p < 0.05). However, enamel beveling had no influence on any of the examined variables. Significant differences were found between pairs of adhesive systems and also between pairs of classes of adhesive systems. One-step self-etching had a significantly worse clinically index than two-step self-etching and three-step etch-and-rinse (p = 0.026 and p = 0.002, respectively). CONCLUSION: The clinical performance is significantly influenced by the type of adhesive system and/or the adhesive class to which the system belongs. Whether the dentin/enamel is roughened or not and whether rubberdam isolation is used or not also significantly influenced the clinical performance. Composite resin restorations placed with two-step self-etching and three-step etch-and-rinse adhesive systems should be preferred over onestep self-etching adhesive systems, GIC-based materials, and PMRCs.