206 resultados para technological protection measures
Resumo:
Comment on: Heinrich H, Goetze O, Menne D, Iten PX, Fruehauf H, Vavricka SR, Schwizer W, Fried M, Fox M. Effect on gastric function and symptoms of drinking wine, black tea, or schnapps with a Swiss cheese fondue: randomised controlled crossover trial. BMJ. 2010 Dec 14;341:c6731. doi: 10.1136/bmj.c6731. PMID 21156747.
Resumo:
Avant - Propos Le feu et la protection incendie Quel que soit l'usage d'un bâtiment, chaque étape de la construction est soumise à l'application de normes. Certaines, utilisées par les architectes et les ingénieurs, concernent le gros oeuvre ; en simplifiant leur rôle, elles assurent la solidité et la stabilité de l'immeuble. Si celui-ci est ouvert au public, des aménagements particuliers concernant la sécurité des personnes sont imposés. D'autres comme les prescriptions sur les installations électriques intérieures, précisent la manière de construire une alimentation, le type de matériel utilisable en fonction du courant et de la tension, les sécurités destinées à éviter toute détérioration des circuits et tout risque d'électrocution, etc. Enfin, les prescriptions en matière de protection incendie jouent évidemment un rôle préventif et, dans le domaine judiciaire, servent de références pour qualifier une éventuelle infraction ; elles évitent qu'une source de chaleur installée dans un bâtiment - tel qu'un appareil de chauffage ou des plaques de cuisson - ou susceptible d'apparaître consécutivement à l'usure d'un matériau ou à son vieillissement - disparition d'un isolant thermique, défaut d'étanchéité d'un conduit transportant les gaz chauds de combustion, par exemple - ne communiquent une partie de l'énergie calorifique dégagée à un combustible et ne l'enflamme. Le concept de protection incendie implique d'exposer et de développer les principales notions relatives à l'inflammation d'un matériau, à sa combustion ainsi qu'au transport de l'énergie calorifique. Fréquemment, le milieu dans lequel le générateur de chaleur est installé joue un rôle dans la phase d'allumage de l'incendie. Il est évident que les prescriptions de protection incendie s'appliquent à chaque élément de construction et, par conséquent, doivent être respectées par toute personne participant à la réalisation d'un ouvrage : le chauffagiste, l'électricien, l'installateur sanitaire, le constructeur de cuisine, mais également le maçon qui construit la cheminée, le peintre et le décorateur qui posent des revêtements ou des garnitures inflammables, le menuisier qui utilise le bois pour dissimuler des conduites de fumée, etc. Dès lors, tout sinistre, hormis celui qui est perpétré délibérément, ne peut s'expliquer que par : - le non-respect ou le défaut d'application d'une prescription de protection incendie; - une lacune de la norme qui ignore une source d'échauffement et/ou un mode de transfert de l'énergie calorifique. Le but premier de ce travail consiste à : - analyser les sinistres survenus durant les années 1999 à 2005 dans plusieurs cantons suisses qui ont fait l'objet d'une investigation de la part d'un service technique de la police ou d'un expert ; - examiner les éléments retenus pour expliquer la cause de l'incendie à la norme afin de répondre à la question : « l'application d'une ou de plusieurs directives lors de l'installation ou de l'utilisation du générateur d'énergie calorifique aurait-elle évité à ce dernier de communiquer une partie de la chaleur dégagée à un combustible et à l'enflammer ? » Le second objectif visé est d'apporter une solution à la question précédente : - si la norme existe, c'est un défaut d'installation ou d'utilisation de la source de chaleur qui est à l'origine de l'incendie. Il importe donc de connaître la raison pour laquelle la prescription a été ignorée ou appliquée de manière erronée ou lacunaire; - si la norme n'existe pas, ce sont les prescriptions en matière de protection incendie qui doivent être complétées. Le chapitre suivant abordera ces thèmes en proposant divers postulats destinés à évaluer l'efficacité actuelle du concept de protection incendie en Suisse.
Resumo:
BACKGROUND: Father's occupational position, education and height have all been used to examine the effects of adverse early life socioeconomic circumstances on health, but it remains unknown whether they predict mortality equally well. METHODS: We used pooled data on 18,393 men and 7060 women from the Whitehall II and GAZEL cohorts to examine associations between early life socioeconomic circumstances and all-cause and cause-specific mortality. RESULTS: During the 20-y follow-up period, 1487 participants died. Education had a monotonic association with all mortality outcomes; the age, sex and cohort-adjusted HR for the lowest versus the highest educational group was 1.45 (95% CI 1.24 to 1.69) for all-cause mortality. There was evidence of a U-shaped association between height and all-cause, cancer and cardiovascular mortality robust to adjustment for the other indicators (HR 1.41, 95% CI 1.03 to 1.93 for those shorter than average and HR 1.36, 95% CI 0.98 to 1.88 for those taller than average for cardiovascular mortality). Greater all-cause and cancer mortality was observed in participants whose father's occupational position was manual rather than non-manual (HR 1.11, 95% CI 1.00 to 1.23 for all-cause mortality), but the risks were attenuated after adjusting for education and height. CONCLUSIONS: The association between early life socioeconomic circumstances and mortality depends on the socioeconomic indicator used and the cause of death examined. Height is not a straightforward measure of early life socioeconomic circumstances as taller people do not have a health advantage for all mortality outcomes.
Resumo:
Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting innovation and discoveries by ensuring them a safe environment even in the case of very novel products. The proposed measures are not considered as constraints but as a support to their research. This methodology is being implemented at the Ecole Polytechnique de Lausanne in over 100 research labs dealing with nanomaterials. It is our opinion that it would be useful to other research and academia institutions as well. [Authors]
Resumo:
Despite showing promise in preclinical models, anti-Staphylococcus aureus vaccines have failed in clinical trials. To date, approaches have focused on neutralizing/opsonizing antibodies; however, vaccines exclusively inducing cellular immunity have not been studied to formally test whether a cellular-only response can protect against infection. We demonstrate that nasal vaccination with targeted nanoparticles loaded with Staphylococcus aureus antigen protects against acute systemic S. aureus infection in the absence of any antigen-specific antibodies. These findings can help inform future developments in staphylococcal vaccine development and studies into the requirements for protective immunity against S. aureus.
Resumo:
How long induced moods last is a critical question for mood research but has been only poorly addressed. In particular, physiological parameters have been rarely included to assess the effectiveness of mood induction procedures. Adopting a dimensional model of mood, we investigated the persistence of four different moods (positive higharousal, positive low-arousal, negative high-arousal, negative lowarousal) induced by four film clips ("sport", "nature", "torture", "slum") during a 9-minute computer task. We measured subjective mood state (valence and arousal), respiration, skin conductance level (SCL), heart rate, and corrugator activity in 76 subjects. Viewing of the selected film clips induced the expected effects both subjectively and physiologically. Corrugator activity was higher at the end of the negative clips than the positive clips, and ventilation and SCL were higher for the arousing clips than for the less arousing clips. People who watched the negative clips still reported more negative valence after the computer task and also showed more facial frowning (cf. figure) and lower SCL during the task than people who watched the positive clips. No arousal effects persisted throughout the task. The results suggest that induced changes in the valence dimension of moods are maintained throughout an intervening task and are physiologically best reflected by corrugator activity and SCL, whereas induced changes in the arousal dimension dissipate quickly. The findings of this study enrich, first, our knowledge concerning the relationships between subjective feelings and their physiological substrate. Second, they inform us about the effectiveness of film clips as a mood induction instrument. Third and most important, they suggest that induced changes in valence last longer than induced changes in arousal. High-arousal moods can last for an extended period of time in daily life, but they seem to be short-lived when induced in the lab. An important methodological consequence is that investigating the effect of the arousal dimension of a person's mood induced in the lab may be only possible when the subsequent task is relatively short. Finally, the findings show which physiological measures may be useful in tracking mood states.
Resumo:
RESUMECette recherche empirique porte sur les emplois temporaires subventionnés (ETS) instaurés dans le cadre du chômage et de l'aide sociale en Suisse depuis une dizaine d'années. La mise en place de politiques d'activation dans le cadre de la protection sociale met l'accent sur les liens explicites, souvent réglementaires, qu'entretiennent actuellement la protection sociale, les politiques de l'emploi et le marché du travail dans les pays industrialisés. Ces transformations ont largement contribué au développement d'activités exercées en marge du marché de l'emploi. Dans le cadre du chômage, comme dans celui de l'aide sociale, une mise au travail peut être exigée en contrepartie du versement des indemnités ; en Suisse, on nomme ce procédé l'assignation au travail. L'assignation est le processus par lequel un-e conseiller?ère en placement peut contraindre, sous peine de sanction (suppression des indemnités pour un temps déterminé) une personne au chômage (inscrit-e auprès d'un office régional de placement) à souscrire à une mesure du marché du travail (MMT), particulièrement les ETS.Cette recherche propose une analyse de l'assignation à un programme d'emploi temporaire sous l'éclairage de la sociologie du travail. Elle adopte une perspective compréhensive attentive aux tensions que vivent les individus pris dans une situation de travail hybride et inédite qui les place aux frontières des différentes catégories administratives de chômage, d'inactivité et de population occupée. Partant d'une étude empirique auprès de personnes assignées, cette recherche mène une analyse qualitative des conditions et de l'organisation du travail en ETS, des modalités contractuelles et statutaires des personnes assignées à une activité de travail contrainte et matériellement non reconnue, puisque non salariée. Elle s'attache également à cerner le vécu de l'assignation au travail, ainsi que le sens que les personnes lui attribuent dans leur trajectoire biographique et professionnelle.SUMMARYThis research investigates a specific and new form of labor, namely «temporary subsidized jobs» {emplois temporaires subventionnés, ETS) that have been developed since the late 1990s in Switzerland in the context of unemployment and social assistance benefits. Although ETS are specific to Switzerland, they echo similar «workfare» measures imposed on unemployed and welfare recipients introduced in recent years in almost all industrialized countries. Indeed, the evolution of public policies and the generalization of «active labour-market policies» {politiques d'activation) have become central to social protection in the majority of Western countries and have emerged in parallel to the expansion of work activities situated at the margins of traditional wage- labor.My analysis of the ETS phenomenon is informed by labor sociology and discusses the pertinence of a classical approach in grasping this hybrid and new work situation, which sets individual persons at the border between various administrative categories such as «unemployed», «inactive» and «at work». I investigate in particular the issue of contractual and statutory modalities imposed on persons who have been assigned to a form of activity that is both constraining as well as materially non-recognized (as it remains outside of traditional wage-labor forms). In order to understand ETS conditions and labor organization, my fieldwork consist of interviews of persons who have been assigned to it and observations. I investigate their personal experience, as well as the meaning that these individuals attribute to the ETS experience in the context of their biographical and professional trajectory.
Resumo:
Over the last 10 years, diffusion-weighted imaging (DWI) has become an important tool to investigate white matter (WM) anomalies in schizophrenia. Despite technological improvement and the exponential use of this technique, discrepancies remain and little is known about optimal parameters to apply for diffusion weighting during image acquisition. Specifically, high b-value diffusion-weighted imaging known to be more sensitive to slow diffusion is not widely used, even though subtle myelin alterations as thought to happen in schizophrenia are likely to affect slow-diffusing protons. Schizophrenia patients and healthy controls were scanned with a high b-value (4000s/mm(2)) protocol. Apparent diffusion coefficient (ADC) measures turned out to be very sensitive in detecting differences between schizophrenia patients and healthy volunteers even in a relatively small sample. We speculate that this is related to the sensitivity of high b-value imaging to the slow-diffusing compartment believed to reflect mainly the intra-axonal and myelin bound water pool. We also compared these results to a low b-value imaging experiment performed on the same population in the same scanning session. Even though the acquisition protocols are not strictly comparable, we noticed important differences in sensitivities in the favor of high b-value imaging, warranting further exploration.