Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review

Purpose: The aim of this review was to systematically evaluate and compare the frequency of veneer chipping and core fracture of zirconia fixed dental prostheses (FOPS) and porcelain-fused-to-metal (PFM) FDPs and determine possible influencing factors. Materials and Methods: The SCOPUS database and International Association of Dental Research abstracts were searched for clinical studies involving zirconia and PFM FDPs. Furthermore, studies that were integrated into systematic reviews on PFM FDPs were also evaluated. The principle investigators of any clinical studies on zirconia FDPs were contacted to provide additional information. Based on the available information for each FOP, a data file was constructed. Veneer chipping was divided into three grades (grade 1 = polishing, grade 2 = repair, grade 3 = replacement). To assess the frequency of veneer chipping and possible influencing factors, a piecewise exponential model was used to adjust for a study effect. Results: None of the studies on PFM FDPs (reviews and additional searching) sufficiently satisfied the criteria of this review to be included. Thirteen clinical studies on zirconia FDPs and two studies that investigated both zirconia and PFM FDPs were identified. These studies involved 664 zirconia and 134 PFM FDPs at baseline. Follow-up data were available for 595 zirconia and 127 PFM FDPs. The mean observation period was approximately 3 years for both groups. The frequency of core fracture was less than 1% in the zirconia group and 0% in the PFM group. When all studies were included, 142 veneer chippings were recorded for zirconia FDPs (24%) and 43 for PFM FDPs (34%). However, the studies differed extensively with regard to veneer chipping of zirconia: 85% of all chippings occurred in 4 studies, and 43% of all chippings included zirconia FDPs. If only studies that evaluated both types of core materials were included, the frequency of chipping was 54% for the zirconia-supported FDPs and 34% for PFM FDPs. When adjusting the survival rate for the study effect, the difference between zirconia and PFM FDPs was statistically significant for all grades of chippings (P = .001), as well as for chipping grade 3 (P = .02). If all grades of veneer chippings were taken into account, the survival of PFM FDPs was 97%, while the survival rate of the zirconia FDPs was 90% after 3 years for a typical study. For both PFM and zirconia FDPs, the frequency of grades 1 and 2 veneer chippings was considerably higher than grade 3. Veneer chipping was significantly less frequent in pressed materials than in hand-layered materials, both for zirconia and PFM FDPs (P = .04). Conclusions: Since the frequency of veneer chipping was significantly higher in the zirconia FDPs than PFM FDPs, and as refined processing procedures have started to yield better results in the laboratory, new clinical studies with these new procedures must confirm whether the frequency of veneer chipping can be reduced to the level of PFM. Int J Prosthodont 2010;23:493-502

Performance of noninvasive ventilation algorithms on ICU ventilators during pressure support: a clinical study.

To evaluate the impact of noninvasive ventilation (NIV) algorithms available on intensive care unit ventilators on the incidence of patient-ventilator asynchrony in patients receiving NIV for acute respiratory failure. Prospective multicenter randomized cross-over study. Intensive care units in three university hospitals. Patients consecutively admitted to the ICU and treated by NIV with an ICU ventilator were included. Airway pressure, flow and surface diaphragmatic electromyography were recorded continuously during two 30-min periods, with the NIV (NIV+) or without the NIV algorithm (NIV0). Asynchrony events, the asynchrony index (AI) and a specific asynchrony index influenced by leaks (AIleaks) were determined from tracing analysis. Sixty-five patients were included. With and without the NIV algorithm, respectively, auto-triggering was present in 14 (22%) and 10 (15%) patients, ineffective breaths in 15 (23%) and 5 (8%) (p = 0.004), late cycling in 11 (17%) and 5 (8%) (p = 0.003), premature cycling in 22 (34%) and 21 (32%), and double triggering in 3 (5%) and 6 (9%). The mean number of asynchronies influenced by leaks was significantly reduced by the NIV algorithm (p < 0.05). A significant correlation was found between the magnitude of leaks and AIleaks when the NIV algorithm was not activated (p = 0.03). The global AI remained unchanged, mainly because on some ventilators with the NIV algorithm premature cycling occurs. In acute respiratory failure, NIV algorithms provided by ICU ventilators can reduce the incidence of asynchronies because of leaks, thus confirming bench test results, but some of these algorithms can generate premature cycling.

Soins intégrés: comment accompagner un changement de culture [Integrated care: how to support a culture change?].

The primary care center at Lausanne University Hospital trains residents to new models of integrated care. The future GPs discover new forms of collaboration with nurses, pharmacists or social workers. The collaboration model includes seeing patients together or delegating care to other providers, with the aim of improving the efficiency of a patient-centered care approach. The article includes examples of integrated care in consultation for travelers, victims of violence, pharmacist medication adherence counseling, medicosocial team work for alcohol use disorders and nurse practitioners' primary care for asylum seekers.

Personalized drug administrations using Support Vector Machine

The decision-making process regarding drug dose, regularly used in everyday medical practice, is critical to patients' health and recovery. It is a challenging process, especially for a drug with narrow therapeutic ranges, in which a medical doctor decides the quantity (dose amount) and frequency (dose interval) on the basis of a set of available patient features and doctor's clinical experience (a priori adaptation). Computer support in drug dose administration makes the prescription procedure faster, more accurate, objective, and less expensive, with a tendency to reduce the number of invasive procedures. This paper presents an advanced integrated Drug Administration Decision Support System (DADSS) to help clinicians/patients with the dose computing. Based on a support vector machine (SVM) algorithm, enhanced with the random sample consensus technique, this system is able to predict the drug concentration values and computes the ideal dose amount and dose interval for a new patient. With an extension to combine the SVM method and the explicit analytical model, the advanced integrated DADSS system is able to compute drug concentration-to-time curves for a patient under different conditions. A feedback loop is enabled to update the curve with a new measured concentration value to make it more personalized (a posteriori adaptation).

Patient-ventilator asynchrony during noninvasive pressure support ventilation and neurally adjusted ventilatory assist in infants and children.

OBJECTIVES: To document the prevalence of asynchrony events during noninvasive ventilation in pressure support in infants and in children and to compare the results with neurally adjusted ventilatory assist. DESIGN: Prospective randomized cross-over study in children undergoing noninvasive ventilation. SETTING: The study was performed in a PICU. PATIENTS: From 4 weeks to 5 years. INTERVENTIONS: Two consecutive ventilation periods (pressure support and neurally adjusted ventilatory assist) were applied in random order. During pressure support (PS), three levels of expiratory trigger (ETS) setting were compared: initial ETS (PSinit), and ETS value decreased and increased by 15%. Of the three sessions, the period allowing for the lowest number of asynchrony events was defined as PSbest. Neurally adjusted ventilator assist level was adjusted to match the maximum airway pressure during PSinit. Positive end-expiratory pressure was the same during pressure support and neurally adjusted ventilator assist. Asynchrony events, trigger delay, and cycling-off delay were quantified for each period. RESULTS: Six infants and children were studied. Trigger delay was lower with neurally adjusted ventilator assist versus PSinit and PSbest (61 ms [56-79] vs 149 ms [134-180] and 146 ms [101-162]; p = 0.001 and 0.02, respectively). Inspiratory time in excess showed a trend to be shorter during pressure support versus neurally adjusted ventilator assist. Main asynchrony events during PSinit were autotriggering (4.8/min [1.7-12]), ineffective efforts (9.9/min [1.7-18]), and premature cycling (6.3/min [3.2-18.7]). Premature cycling (3.4/min [1.1-7.7]) was less frequent during PSbest versus PSinit (p = 0.059). The asynchrony index was significantly lower during PSbest versus PSinit (40% [28-65] vs 65.5% [42-76], p < 0.001). With neurally adjusted ventilator assist, all types of asynchronies except double triggering were reduced. The asynchrony index was lower with neurally adjusted ventilator assist (2.3% [0.7-5] vs PSinit and PSbest, p < 0.05 for both comparisons). CONCLUSION: Asynchrony events are frequent during noninvasive ventilation with pressure support in infants and in children despite adjusting the cycling-off criterion. Compared with pressure support, neurally adjusted ventilator assist allows improving patient-ventilator synchrony by reducing trigger delay and the number of asynchrony events. Further studies should determine the clinical impact of these findings.

Special commentary : a call for intensive metabolic support.

PURPOSE OF REVIEW: This special commentary addresses recent clinical reviews regarding appropriate nutrition and metabolic support in the critical care setting. RECENT FINDINGS: There are divergent approaches between North America and Europe for the use of early nutrition support and combined enteral nutrition and parenteral nutrition support possibly due to the commercial availability of specific parenteral nutrients. The advent of intensive insulin therapy has changed the landscape of metabolic support in the intensive care unit, and previous notions about infective risk of parenteral nutrition will need to be re-addressed. Patients with brain failure may benefit from an intensive insulin therapy with a blood glucose target that is higher than that used in patients without brain failure. Patients with heart failure may benefit from the addition of nutritional pharmacology that targets proximate oxidative pathophysiological pathways. Intradialytic parenteral nutrition may be viewed as another form of supplemental parenteral nutrition when enteral nutrition is insufficient in patients on hemodialysis in the intensive care unit. SUMMARY: It is proposed that intensive metabolic support be routinely implemented in the intensive care unit based on the following steps: intensive insulin therapy with an appropriate blood glucose target, nutrition risk assessment, early and if needed combined enteral nutrition and parenteral nutrition to target 20-25 kcal/kg/day and 1.2-1.5 g protein/kg/day, and nutritional and metabolic monitoring.

Troubleshooting in extracorporeal life support.

Since the first clinical use of extracorporeal circulation in the last century [1] by John Gibbon and the first successful mechanical support of the left ventricular function by Forest Dodrill [2], the progress of techniques and technologies has helped to develop minimised systems for extracorporeal circulatory and respiratory support. However, the fact is that, despite the advanced technologies used for extracorporeal support, successful application in order to be benefit a critically ill population requires highly trained and skilled teams. Application of these highly sophisticated techniques in life-saving situations inside and/or outside the operating room is a procedure with certain pitfalls and dangers. The aim of this review is to provide a short overview of the technical aspects of extracorporeal circulation, with a look at the recent literature and clinical experiences focusing on technical as well surgical considerations regarding the urgent and/or emergent usage of a central as well as peripheral extracorporeal system.

Improving globally distributed software development and support processes - A workflow view

We propose a new approach and related indicators for globally distributed software support and development based on a 3-year process improvement project in a globally distributed engineering company. The company develops, delivers and supports a complex software system with tailored hardware components and unique end-customer installations. By applying the domain knowledge from operations management on lead time reduction and its multiple benefits to process performance, the workflows of globally distributed software development and multitier support processes were measured and monitored throughout the company. The results show that the global end-to-end process visibility and centrally managed reporting at all levels of the organization catalyzed a change process toward significantly better performance. Due to the new performance indicators based on lead times and their variation with fixed control procedures, the case company was able to report faster bug-fixing cycle times, improved response times and generally better customer satisfaction in its global operations. In all, lead times to implement new features and to respond to customer issues and requests were reduced by 50%.

Support informatique à l'enseignement prégradué de la dermatologie CD-Rom : ''Le petit Rouvé : atlas de dermatologie''

Résumé L'arrivée en force de l'imagerie numérique de bonne qualité à un prix abordable m'a fait réfléchir à la meilleure manière de l'intégrer dans la pratique courante de l'enseignement de la dermatologie, spécialité très visuelle. Comment mettre à profit la richesse des images et les nombreuses possibilités pédagogiques que l'informatique offre. J'ai étudié quelques produits existant sur le marché; je constate que les possibilités offertes par l'informatique restent souvent sous exploitées. Les réalisations manquent de liens hypertextes et la facilité d'accès aux images que permet l'informatique n'est pas appliquée. Les images sont trop souvent présentées avec une légende trop brève, ne soulignant pas les points importants pour le diagnostic. Certains outils ne proposent même pas de diagnostics différentiels. Ma réflexion me pousse à croire que l'apprentissage doit se faire par l'image. L'étudiant doit y apprendre les bases du diagnostic morphologique, trouver ce qui lui permet de poser le diagnostic. Compte tenu de mes observations, j'ai développé à Lausanne mon propre atlas interactif de diagnostics différentiels, basé sur la comparaison d'images. Mon projet n'a donc pas pour but de remplacer un livre ou un atlas, mais je souhaite compléter les moyens d'apprentissage basés sur l'image. Sa particularité tient dans la manière dont on a sélectionné les diagnostics différentiels; mon critère principal n'a pas été un choix théorique, mais la ressemblance entre deux images de ma bibliothèque. Cette manière de procéder m'a forcé à résoudre quelques questions fondamentales à propos des diagnostics différentiels. J'ai prêté une attention particulière à ce que l'utilisateur replace aisément les 850 images dans une structure que j'ai voulue claire. Cela m'a poussé à réfléchir sur la manière dont on aborde la dermatologie: par localisation, d'après les lésions, selon l'âge ou d'après des critères de physiopathologie ? Chaque image est accessible par la table des matières originale, soit par un module de recherche multicritère. Mon produit est personnalisable grâce à la présence de plusieurs outils. "Le Petit Rouvé", première version, est maintenant disponible pour une phase de test. Dans un second temps, l'atlas sera distribué aux étudiants de 4ème et 6ème année de la Faculté de médecine de Lausanne pour la rentrée de 2004-2005.

Mise en pratique d'un support de cours dans le cadre d'une formation spécialisée en santé au travail à la Faculté des sciences de la santé, Université d'Abomey Calavi, Cotonou, Bénin

La promotion de la santé au travail, le transfert de connaissances et l'échange d'expériences font partie, entre autres, des missions de l'Institut universitaire romand de Santé au Travail (IST). La collaboration entre un pays industrialisé et un pays en voie de développement peut fortement contribuer à la prise de conscience d'un concept important comme celui de la santé au travail. Au Bénin, une formation spécialisée en santé au travail a été mise en place depuis une dizaine d'années. Pour soutenir ses activités de coopération, l'IST a développé, avec le soutien de l'Organisation mondiale de la Santé (OMS) et avec le concours du Service de toxicologie industrielle et des pollutions intérieures de l'Etat de Genève (STIPI), le livre « Introduction à l'hygiène du travail ». Ce document représente un support de cours utile pour former des spécialistes et des intervenants en santé et sécurité au travail qui ne sont pas hygiénistes du travail. Il a été imprimé en 2007 à grande échelle dans la série « Protecting workers' health » de l'OMS et est accessible électroniquement sur le site de l'OMS. Le but de ce travail de diplôme est de mettre en pratique et d'évaluer ce support de cours dans le cadre d'une formation spécialisée en Santé au Travail à la Faculté des Sciences de la Santé de l'Université d'Abomey Calavi à Cotonou, Bénin. Le module d'hygiène du travail a été donné sur une semaine de cours. La semaine était composée de cours théoriques, de visites d'entreprises ainsi que d'un examen d'évaluation en fin de semaine. Globalement, malgré la densité du cours, les messages importants du module ont été acquis. Le support du cours est un outil permettant de transmettre les bases d'une discipline importante dans le domaine de la santé au travail, notamment dans un pays où la législation est encore balbutiante.