Origin of needle fibre calcite (NFC) : a geochemical approach

ABSTRACTNeedle fibre calcite (NFC) is one of the most widespread habits of pedogenic calcite. It is a monocrystal of calcite, in the shape of a needle, with a diameter of one micron and a length between 4 and 103 times its width. NFC occurs in soils with different macroscopic and microscopic morphologies. Macroscopically, two main habits of NFC exist: "cotton ball'Mike clusters and as "powder" coating on pebbles inside the soil. It can also act as nucleation sites for precipitation of calcite cements of purely physicochemical origin (LCC - Late Calcitic Cement). Although many studies have been conducted on needle fibre calcite, its origin remains a subject of debate. The NFC having never been reproduced in the laboratory whatever the considered approach, the processes responsible for its precipitation as a so particular morphology remain unexplained. The shift between the length orientation of the needle crystal and the normal axis of calcite growth (c-axis) is also unresolved.Samples taken in two soils observed in quarries (Villiers and Savagnier) in the Swiss Jura Mountains are used to investigate the processes involved in the formation of these calcite crystals in pedogenic environments. Three groups of microscopic morphologies are distinguished: (i) simple needles (SN), (ii) simple needles with overgrowths (SNO), and (iii) simple needles with nanofibres (SNN), nanofibres being either organic or mineral in nature. These groups correspond to different stages in the formation and evolution of NFC.Comparison of carbon and oxygen isotope compositions of NFC with LCC, in relationship with the composition of the carbonate host rock (CHR), and the carbon isotope signature of dissolved inorganic carbon (DIC) from the soil waters, indicates that both NFC and LCC are precipitated in isotopic equilibrium with the soil solution. Similar Ô13C and Ô180 values of the elongated NFC and the rhombohedral calcite crystals of the LCC suggest that the precipitation of these different calcite habits is not due to changes in physicochemical conditions. The growth of NFC crystals inside an organic mould formed by the fungal hyphae could explain the formation of calcite ciystals in the shape of a needle in isotopic equilibrium with the local environment.Strontium and calcium isotope compositions of the three microscopic groups of NFC and LCC were also studied, in order to determine the origin of calcium (Ca2+) entrapped in the calcite lattice and to elucidate the processes responsible for the precipitation of NFC. The 87Sr/86Sr ratio of the SN is closer to the 87Sr/86Sr ratio of the carbonate host rock than the LCC, SNO, and SNN. This could be another clue for the formation of SN inside fungal hyphae, because fungi are known to dissolve the rocks to release and translocate through their hyphae nutrients necessary for their growth. SN and SNN are depleted in Sr and enriched in ^Ca compared to the LCC. In the context of Villiers quarry, where the two ciystal shapes precipitate at similar temperature (in a range of 0,6°C), such variations are the result of a slower precipitation rate of NFC, which is inconsistent with a purely physicochemically precipitated elongate crystal.Finally, NFC is enriched in major and trace elements (i.e. Fe, Zn, Cu, and Mo) compared to the LCC. This enrichment is ascribed to modification in precipitation processes between the NFC and LCC. Right now, it is not possible to preclude the influence of the particular shape of NFC or the biological influence. REEs are not fractionated in NFC, contrary to LCC. Thus, NFC does not precipitate from a percolation solution circulating downward the soil, which should lead to the fractionation of the REEs. As explained above, fungi, are able to dissolve and translocate nutrients. This kind of processes allows releasing elements in the soil solution without fractionation and could explain the particular chemical signature of NFC regarding the REEs.The geochemical approach to investigate the origin of NFC presented in this study does not allow providing direct clues to the fungal origin of NFC, but brings several new insights in the understanding of the formation of such a particular mineral, calcite needles, by precluding definitively their physicochemical origin.RESUMELa calcite en aiguilles (NFC) est l'une des formes les plus ubiquiste de calcite pédogénique. Il s'agit d'un monocrystal de calcite d'un diamètre d'un micron et d'une longueur 4 à 102 fois supérieure à sa largeur. A l'échelle macroscopique, la NFC a été observée sous deux principaux aspects : l'une « cotonneuse » et l'autre formant un mince croûte autour des graviers du sol. La NFC peut également servir de support à la nucléation de ciments secondaires précipités de manière purement physico-chimique (LCC). Malgré les nombreuses études menées sur la NFC, son origine demeure encore inconnue. A ce jour, aucune expérience en laboratoire n'a permis de créer de la calcite en aiguilles, et ce, quelque soit l'approche abordée. Par conséquent, les processus précis responsables de la précipitation calcite avec une telle morphologie restent inconnus. Le décalage existant entre l'axe d'allongement des aiguilles de calcite et l'axe normal de croissance de la calcite (axe c) reste inexpliqué.Des échantillons de NFC, LCC, roche mère, eau de pluie des différents horizons du sol ont été prélevés principalement au front de deux carrières de graviers, ainsi que dans un profil de sol adjacent à ces carrières, dans le but de mieux comprendre les processus à l'origine de la précipitation de calcite en forme d'aiguille. Trois micro-morphologies ont été distinguées: les aiguilles simples (SN), les aiguilles simples avec surcroissances calcitiques (SNO) et enfin les aiguilles simples avec nanofibres (SNN), celles-ci pouvant être de minérales ou organiques. Ces groupes, d'après nos résultats et les études antérieures pourraient correspondre à différentes étapes de formation de la calcite en aiguilles.Dans un premier temps, la comparaison des signatures isotopiques de la calcite en aiguilles, du LCC, de la roche mère et du carbone inorganique dissout dans la solution du sol (CID) indique que la NFC, tout comme le LCC, précipite en équilibre avec la solution du sol. Les valeurs similaires en Ô13C et δ180 de cristaux de calcite allongés (NFC) et rhombohédriques (LCC) formés dans un même milieu suggère que ces différences morphologiques ne peuvent pas être attribuées à des modifications purement physico-chimiques. La croissance de NFC à l'intérieur d'un moule organique comme les hyphes de champignons semble être la seule hypothèse plausible permettant d'expliquer la formation de monocrystaux allongés de calcite en équilibre avec leur environnement.La composition isotopique en strontium (Sr) et calcium (Ca) des LCC et des trois micro¬morphologies de la NFC ont été étudiées également, afin de déterminer l'origine du Ca2+ présent dans le réseau cristallin de la calcite en aiguilles, ainsi que les processus responsables de la formation de NFC. Les valeurs du rapport 87Sr/86$r de la forme SN sont les plus proches de celles de la roche mère par rapport aux formes SNN et SNO et du LCC. Ceci pourrait être un nouvel indice de l'implication des champignons dans la précipitation de calcite en aiguilles, puisqu'ils sont connus pour avoir la capacité de dissoudre les roches afin de libérer les nutriments nécessaires à leur croissance, ainsi que de les transloquer par leurs hyphes. De plus, les formes SN et SNN sont appauvries en Sr et enrichies en "Ca, comparativement au LCC. Dans le sol étudié, tous les carbonates de calcium précipitent à la même température, par conséquent, de telles variations sont dues à un taux de précipitation plus lent de SN et SNN, ce qui est contradictoire avec l'hypothèse physico-chimique. Pour finir, la NFC est enrichie en certains éléments majeurs et traces (i.e. Fe, Zn, Cu et Mo) par rapport au LCC. Ceci peut être attribué à différents processus de formation entre la NFC et le LCC. Pour le moment il est impossible d'exclure l'influence de la forme particulière de la NFC ou celle du champignon. Les terres rares (REEs) ne sont pas fractionnées dans la NFC, contrairement au LCC. Ceci peut être expliqué par le fait que la NFC précipite à partir d'une solution qui n'a pas percolé à travers le sol. Les champignons en dissolvant les roches mettent en solution éléments sans les fractionner. L'approche géochimique de l'étude de la calcite en aiguilles ne permets pas de produire des preuves directes sur sa potentielle origine fongique, mais permet de mieux comprendre comment un minéral aussi singulier que la NFC peut se former. D'autre pare cette étude permets d'exclure définitivement l'hypothèse physico-chimique de l'origine de la calcite en aiguilles

Constraints on Miocene oceanography and climate in the Western and Central Paratethys: O-, Sr-, and Nd-isotope compositions of marine fish and mammal remains

The Paratethys evolved as a marginal sea during the Alpine-Himalayan orogeny in the Oligo-Miocene. Sediments from the northern Alpine Molasse Basin, the Vienna, and the Pannonian Basins located in the western and central part of the Paratethys thus provide unique information on regional changes in climate and oceanography during a period of active Alpine uplift Oxygen isotope compositions of well-preserved phosphatic fossils recovered from the sediments support deposition under sub-tropical to warm-temperate climate with water temperatures of 14 to 28 degrees C for the Miocene. delta(18)O values of fossil shark teeth are similar to those reported for other Miocene marine sections and, using the best available estimates of their biostratigraphic age, show a variation until the end of the Badenian similar to that reported for composite global record. The (87)Sr/(86)Sr isotope ratios of the fossils follow the global Miocene seawater trend, albeit with a much larger scatter. The deviations of (87)Sr/(86)Sr in the samples from the well-constrained seawater curve are interpreted as due to local input of terrestrially-derived Sr. Contribution of local sources is also reflected in the epsilon(Nd) values, consistent with input from ancient crystalline rocks (e.g., Bohemian Massif and/or Mesozoic sediments with epsilon(Nd) < -9. On the other hand, there is evidence for input from areas with Neogene volcanism as suggested by samples with elevated epsilon(Nd) values >-7. Excluding samples showing local influence on the water column, an average epsilon(Nd) value of -7.9 +/- 0.5 may be inferred for the Miocene Paratethys. This value is indistinguishable from the epsilon(Nd) value of the contemporaneous Indian Ocean, supporting a dominant role of this ocean in the Western and Central Paratethys. (C) 2008 Elsevier B.V. All rights reserved.

Oxidation of methane at the CH4/H2O-(CO2) transition zone in the external part of the Central Alps, Switzerland: Evidence from stable isotope investigations

With the aim of understanding the mechanisms that control the metamorphic transition from the CH4- to the H2O-(CO2)-dominated fluid zone in the Helvetic domain of the Central Alps of Switzerland, fluid inclusions in quartz, illite ``crystallinity'' index, vitrinite reflectance, and the stable isotope compositions of vein and whole rock minerals and fluids trapped in quartz were investigated along four cross-sections. Increasing temperature during prograde metamorphism led to the formation of dry gas by hydrocarbon cracking in the CH4-zone. Fluid immiscibility in the H2O-CH4-(CO2)-NaCl system resulted in cogenetic, CH4- and H2O-dominated fluid inclusions. In the CH4-zone, fluids were trapped at temperatures <= 270 +/- 5 degrees C. The end of the CH4-zone is markedby a sudden increase of CO2 content in the gas phase of fluid inclusions. At temperatures > 270 +/- 5 degrees C, in the H2O-zone, the total amount of volatiles within the fluid decreased below 1 mol% with no immiscibility. This resulted m total homogenization temperatures of H2O-(CO2-CH4)-NaCl inclusions below 180 degrees C. Hydrogen isotope compositions of methane in fluid inclusion have delta D values of less than -100 parts per thousand in the CH4-zone, typical for an origin through cracking of higher hydrocarbons, but where the methane has not equilibrated with the pore water. delta D values of fluid inclusion water are around -40 parts per thousand., in isotopic equilibrium with phyllosilicates of the whole rocks. Within the CH4 to H2O(CO2) transition zone, delta D(H2O) values in fluid inclusions decrease to -130 parts per thousand interpreted to reflect the contribution of deuterium depleted water from methane oxidation. In the H2O-zone, delta D(H2O) values increase again towards an average of -30 parts per thousand which is again consistent with isotopic equilibrium with host-rock phyllosilicates. delta C-13 values of methane in fluid inclusions from the CH4-zone are around -27 parts per thousand in isotopic equilibrium with calcite in veins and whole rocks. The delta C-13(CH4) values decrease to less than -35 parts per thousand at the transition to the H2O-zone and are no longer in equilibrium with the carbonates in the whole rocks. delta C-13 values of CO, are variable but too low to be in equilibrium with the wall rock fluids, compatible with a contribution of CO2 from closed system oxidation of methane. Differences in isotopic composition between host-rock and Alpine fissure carbonate are generally small, suggesting that the amount of CO2 produced by oxidation of methane was small compared to the C-budget in the rocks and local pore fluids were buffered by the wall rocks during precipitation of calcite within the fissures. (c) 2006 Elsevier B.V. All rights reserved.

Oxygen-isotope thermometry of quartz-calcite veins - Unraveling the thermal-tectonic history of the subgreenschist facies Morcles nappe (Swiss Alps)

Combined structural analysis and oxygen isotope thermometry of syntectonic quartz-calcite fibrous veins can be used to correlate the thermal history of deformed rocks,vith specific structural and tectonic events. Results are presented for the Mercies nappe in the western Helvetic Alps, Switzerland, where mineral parageneses, illite `'crystallinity,'' and fluid inclusion chemistry record an apparent peak metamorphic temperature gradient that increased across the Morcles nappe from anchizonal conditions in the foreland to epizonal conditions in its hinterland root zone. Twenty-seven quartz-calcite veins were analyzed in this study in order to determine the temperatures of veining during formation and deformation of the nappe, Peak metamorphic temperatures ranged from approximate to 260 to 290 degrees C in the shallower, foreland localities and to approximate to 330 to 350 degrees C in the deeper, more hinterland localities at the end of S1-foliation formation, related to large-scale folding. Temperatures gradually decreased throughout the nappe during subsequent development of the S2 foliation and S3 crenulation cleavage, Uplift and erosion of the overlying nappe pile resulted in slow cooling of the Morcles nappe during the waning stages of the Alpine Orogeny. The dominant foliation-forming deformation of the Morcles nappe occurred at elevated temperatures over the course of 10 to 15 Ma. Combined structure-oxygen isotope analyses of quartz-calcite veins yield better temperature and temporal constraints on the thermal histories of subgreenschist vein-bearing tectonites than do other geothermometers.

Hydrogen and oxygen isotope behaviors during variable degrees of upper mantle melting: Example from the basaltic glasses from Macquarie Island

We present measurements of hydrogen and oxygen isotopes in MORB glasses from Macquarie Island (SW. Pacific Ocean) coupled with determination of bulk H2O content by two independent techniques: total dehydration and FTIR. The incompatible trace elements in these glasses vary by a factor of 12 to 17, with K2O varying from 0.1 to 1.7 wt.%; these ranges reflect a variable degree of closed-system mantle melting, estimated from 1 to 15%. Water concentrations determined by the two techniques match well, yielding a range from 0.25 to 1.49 wt.% which correlates positively with all of the measured incompatible trace elements, suggesting that water is un-degassed, and behaves conservatively during mantle melting. Also, the agreement between the FTIR-determined and extracted water contents gives us confidence that the measured isotopic values of hydrogen reflect that of the mantle. Comparison of the range of water content with that of other incompatible trace elements allows estimation of the water partition coefficient in lherzolite, 0.0208 (ranging from 0.017 to 0.023), and the water content in the source, 386 ppm (ranging from 370 to 440 ppm). We observe a fairly narrow range in delta D and delta O-18 values of -75.5 +/- 4.5 parts per thousand and 5.50 +/- 0 .05 parts per thousand respectively, that can be explained by partial melting of normal lherzolitic mantle. The measured delta D and delta O-18 values of Macquarie Island glasses that range from nepheline- to hypersthene-normative, and from MORB to EMORB in composition, are identical to those in average global MORB. The observed lack of variation of delta D and delta O-18 with 1 to 15% degree of mantle melting is consistent with a bulk melting model of delta D and delta O-18 fractionation, in which water is rapidly scavenged into the first partial melt. The narrow ranges of delta D and delta O-18 in normal mantle are mostly due to the buffering effect of clino- and orthopyroxenes in the residual assemblage; additionally, fast ``wet'' diffusion of oxygen and hydrogen isotopes through the melting regions may further smooth isotopic differences. (C) 2012 Elsevier B.V. All rights reserved.

Stable isotope (C, O, S) systematics of the mercury mineralization at Idrija, Slovenia: constraints on fluid source and alteration processes

The world-class Idrija mercury deposit (western Slovenia) is hosted by highly deformed Permocarboniferous to Middle Triassic sedimentary rocks within a complex tectonic structure at the transition between the External Dinarides and the Southern Alps. Concordant and discordant mineralization formed concomitant with Middle Triassic bimodal volcanism in an aborted rift. A multiple isotopic (C, O, S) investigation of host rocks and ore minerals was performed to put constraints on the source and composition of the fluid, and the hydrothermal alteration. The distributions of the delta(13)C and delta(18)O values of host and gangue carbonates are indicative of a fracture-controlled hydrothermal system, with locally high fluid-rock ratios. Quantitative modeling of the delta(13)C and delta(18)O covariation for host carbonates during temperature dependent fluid-rock interaction, and concomitant precipitation of void-filling dolomites points to a slightly acidic hydrothermal fluid (delta(13)Capproximate to-4parts per thousand and delta(18)Oapproximate to+10parts per thousand), which most likely evolved during isotopic exchange with carbonates under low fluid/rock ratios. The delta(34)S values of hydrothermal and sedimentary sulfur minerals were used to re-evaluate the previously proposed magmatic and evaporitic sulfur sources for the mineralization, and to assess the importance of other possible sulfur sources such as the contemporaneous seawater sulfate, sedimentary pyrite, and organic sulfur compounds. The delta(34)S values of the sulfides show a large variation at deposit down to hand-specimen scale. They range for cinnabar and pyrite from -19.1 to +22.8parts per thousand, and from -22.4 to +59.6parts per thousand, respectively, suggesting mixing of sulfur from different sources. The peak of delta(34)S values of cinnabar and pyrite close to 0parts per thousand is compatible with ore sulfur derived dominantly from a magmatic fluid and/or from hydrothermal leaching of basement rocks. The similar stratigraphic trends of the delta(34)S values of both cinnabar and pyrite suggest a minor contribution of sedimentary sulfur (pyrite and organic sulfur) to the ore formation. Some of the positive delta(34)S values are probably derived from thermochemical reduction of evaporitic and contemporaneous seawater sulfates.

Apparent stable-isotope heterogeneities in gangue carbonates of the Mississippi Valley-type Zn-Pb deposits of San-Vicente, Central Peru

The aim of the present communication is to emphasize that some variations of the measured delta(13)C and delta(18)O values are apparent, and due to analytical interferences caused by the presence of sulfur and organosulfur compounds in the analyzed carbonates. This is particularly relevant for isotopic studies on carbonate-hosted mineral deposits, where the nearly ubiquitous association of the host carbonates with organic matter and sulfides can certainly affect the metallogenetic interpretations. In this work two methods were used to overcome the disturbing effects of sulfides and organic matter: (1) sample pretreatment following the method proposed by Charef and Sheppard (1984), combining the oxidation of organic matter with sodium hypochlorite and trapping of the sulfur species with silver phosphate; and (2) laser-based microprobe extraction. Apparent isotopic variations in sparry dolomite from a single hand sample of zebra ore from the MVT Zn-Pb deposit, San Vicente, central Peru, are as large as 6 parts per thousand delta(13)C and 4 parts per thousand delta(18)O. These variations are reduced to several tenths of a per mil when the samples are pretreated. A careful examination of the effects of treatment with NaOCl and/or Ag3PO4 in relation to the concentration of sulfide inclusions indicates that the main disturbing effects for delta(13)C values are the presence of sulfur species and organic matter, whereas the delta(18)O values are mainly affected by the presence of sulfides. Fine- and medium-grained replacement carbonates from MVT and other sediment-hosted base metal deposits are potentially the most affected during isotope analysis, due to the common presence of organic matter and sulfides. Using in situ laser microprobe techniques, it is possible to determine isotopic variations at a sub-millimeter scale. Our results show that laser extraction analysis allows a more precise sampling of the carbonate minerals, and minimizes contamination of the sample with sulfides and to some extent with intergrown organic matter. However, there is an isotopic shift associated with the laser extraction technique, of the order of 0.5-1 parts per thousand for delta(13)C and delta(18)O values.

Carbon-isotope stratigraphy and ammonite faunal turnover for the Middle Jurassic in the Southern Iberian palaeomargin

Variations in the stable carbon-isotope ratio of marine and continental sediments can reflect changes in sink and flux modifications of the palaeocarbon cycle. Here we report carbon-isotope compositions of Middle Jurassic marine carbonates from the Betic Cordillera (southern Spain), which represents an ideal region to link the stable carbon-isotope curves directly to ammonite zones and subzones, and thereby for the first time achieve an accurate chronostratigraphic calibration. The five sections studied represent basin and high swell deposits of the Southern Iberian palaeomargin. We find a similar delta C-13 of carbonates between different oceanic areas, suggesting a homogeneous carbon-isotope oceanic reservoir through the Middle Jurassic. The Aalenian-Bajocian transition is a critical period in ammonite evolution; hence the Early Jurassic fauna are replaced by new ammonite families which become dominant throughout the Middle and Late Jurassic. For this reason, we compared the delta C-13 values of carbonates with ammonite diversity and extinction rates at different taxonomical levels in order to explore the possible relationship between the carbon cycle and ammonite evolution. The carbon-isotope values of carbonates are not exactly linearly correlated with the extinction rate and ammonite diversity, but the main faunal turnovers follow minimum delta C-13 values, where extinct taxa are replaced by new ones. Likewise, radiation episodes are associated with increasing delta C-13 values and with transgressive sea-level rise. All these data support the idea that perturbations in the global carbon cycle reflect rapid palaeoenvironmental changes. We made detailed analyses of these faunal turnovers, using them as a proxy to identify major palaeoenvironmental crises in their ecosystems forced by modification in the carbon cycle. (c) 2006 Elsevier B.V All rights reserved.

Origin of cadmium enrichments in carbonate rocks deposited in the Alpine Tethys area during the Middle-Late Jurassic

ABSTRACTThe pollution of air, soil and water by heavy metals through anthropogenic activities is an object of numerous environmental studies since long times. A number of natural processes, such as volcanic activity, hydrothermal fluid circulation and weathering of metal-rich deposits may lead to an additional and potentially important input and accumulation of heavy metals in the environment. In the Swiss and French Jura Mountains, anomalous high cadmium (Cd) concentrations (up to 16 ppm) in certain soils are related to the presence of underlying Cd-enriched (up to 21 ppm) carbonate rocks of Middle to Late Jurassic age. The aim of this study is to understand the processes controlling Cd incorporation into carbonate rocks of Middle and Late Jurassic age and to reconstruct the sedimentary and environmental conditions, which have led to Cd enrichments in these sedimentary rocks.Cd concentrations in studied hemipelagic sections in France vary between 0.1 and 0.5 ppm (mean 0.15 ppm). Trace-element behavior and high Mn concentrations suggest that sediment accumulation occurred in a well-oxygenated environment. Increases in Cd contents in the bulk-rock carbonate sediments may be related to increases in surface-water productivity under oxic conditions and important remineralization of organic matter within the water column. In platform settings preserved in the Swiss Jura Mountains, no correlation is observed between Cd contents and evolution of environmental conditions. Cd concentrations in these platform sections are often below the detection limit, with isolated peaks of up to 21 ppm. These important Cd enrichments are associated with peaks in Zn concentrations and are present in carbonate rocks independently of facies and age. The high Cd contents in these shallow-water carbonate rocks are partly related to the presence of disseminated, Cd-rich (up to 1.8%), sphalerite (ZnS) mineralization. The basement rocks are considered to be the source of metals for sulfide mineralization in the overlying Jurassic strata, as the sphalerite Pb isotope pattern is comparable to that of granite rocks from the nearby southern Black Forest crystalline massif. The Rb-Sr ages of sphalerite samples indicate that a main phase of sphalerite formation occurred near the boundary between the late Middle and early Late Jurassic, at around 162 Ma, as a result of enhanced tectonic and hydrothermal activity in Europe, related to the opening of the Central Atlantic and to the tectonic/thermal subsidence during spreading of the Alpine Tethys. I therefore propose to use unusually high Cd concentrations in carbonates as a tracer of tectonic activity in the Jura Mountains area, especially in the case when important enrichments in Zn co-occur. Paleoproductivity reconstructions based on records of authigenic Cd may be compromised not only by post-depositional redistribution, but also by incorporation of additional Cd from hydrothermal solutions circulating in the rock.The circulation of metal-rich hydrothermal fluids through the sediment sequence, in addition to specific environmental conditions during sedimentation, contributes to the incorporation of Cd into the carbonate rocks. However, only hydrothermal activity has led to the unusually high concentrations of Cd in carbonate rocks of Bajocian-Oxfordian age, through the formation of sphalerite mineralization.

Tracing of the Rhône River, wastewater, and mixing within Lake Geneva : stable isotope compositions of water and dissolved inorganic carbon

This study presents an evaluation of the stable isotopic composition of water (hydrogen and oxygen) and dissolved inorganic carbon (DIC) of Lake Geneva, a deep, peri-alpine lake situated at the border between Switzerland and France. The research goal is to apply vertical and seasonal variations of the isotope compositions to evaluate mixing processes of pollutants, nutrients and oxygen. Depth profiles were sampled at different locations throughout Lake Geneva on a monthly and seasonal basis over the course of three years (2009-2011). The results of the oxygen isotopic composition indicate a Rhône River interflow, which can be traced for about 55 km throughout the lake during summer. The Rhône River interflow is 7 to 15 m thick and the molar fraction of Rhône water is estimated to amount up to 37 %. Calculated density of the water and measured isotopic compositions demonstrate that the interflow depth changes in conjunction with the density gradient in the water column during fall. Partial pressure of CO2 indicates that the epilimnion is taking up CO2 from the atmosphere between spring and fall. The epilimnion is most enriched in 13CDIC in September and a progressive depletion of 13CDIC can be observed in the metalimnion from spring to late fall. This stratification is dependent on the local density stratification and the results demonstrate that parameters, which are indicating photosynthesis, are not necessarily linked to δ13CDIC values. In addition, the amount of primary production shows a strong discrepancy between summer 2009 and 2010, but δ13CDIC values of the epilimnion and metalimnion do not indicate variations. In the hypolimnion of the deep lake δ13CDIC values are constant and the progressive depletion allows tracing remineralization processes. The combination of stable carbon and oxygen isotopic compositions allows furthermore tracing Rhône River water fractions, as well as wastewater, stormwater and anthropogenic induced carbon in the water column of the shallow Bay of Vidy. In combination with the results of measured micropollutants, the study underlines that concentrations of certain substances may be related to the Rhône River interflow and/or remineralization of particulate organic carbon. Water quality monitoring and research should therefore be extended to the metalimnion as well as sediment water interface.

Carbon-isotope stratigraphy of the Liesberg Beds Member (Oxfordian, Swiss Jura) using echinoids and crinoids

The Liesberg Beds form the transition between the lower Oxfordian dark coloured marls (Renggeri Member and the Terrain a Chailles Member) and the middle Oxfordian reefal limestones (St-Ursanne Formation). Both lithofacies and biofacies are diverse and evolve rapidly up-section. Stable isotope studies of whole-rock samples are therefore excluded. In search for a convenient isotopic marker, we measured carbon isotope compositions of several fossil groups and chose crinoid stems of Millericrinus spp and echinoid spines of Paracidaris spp because of their abundance throughout the section and the small variations of delta(13)C within one fossil and between fossils from the same stratigraphic level. The delta(13)C values of echinoderms largely reflect earliest diagenetic conditions at the seawatersediment interface. The porous stereome structure secreted of high Mg-calcite by echinoderms has a high reactive surface/volume ratio, which triggers the precipitation of very early syntaxial cements. In the four studied sections reproducible carbon isotope shifts were observed both for Millericrinus spp stems and Paracidaris spp spines. A negative delta(13)C shift of 1-1.5 parts per thousand was observed near the base of the section, just above the transition from Terrain a Chailles Member, where the first corals occur. In the middle and upper part of the four sections, characterised by a stepwise increase of corals and the macrofossils, a positive delta(13)C Shift of about 2 parts per thousand was observed. Despite the highly variable lithologic composition of the Liesberg Beds;Member, carbon isotope shifts seem to be consistent and warrant an interpretation as an original signal, controlled by the isotopic composition of dissolved carbonic acid in seawater. We explain the heavy delta(13)C values (approximate to 2-2.3 parts per thousand) in the lower Liesberg Beds as a transition from an oxygen-limited environment (Terrain a Chailles Member) to the Liesberg Beds Member. The lowest delta(13)C values (approximate to 1-1.5 parts per thousand) correspond to a large input of dissolved nutrients to the platform under oxidizing conditions. The ensuing positive shift (between 2.5 and 3.5 parts per thousand), however, seems to correspond to a general trend of opening up of the platform and connection to open marine waters. Positive delta(13)C values in the upper Liesberg Beds is interpreted as a result of important accelareted extraction of organic carbon from the ocean reservoir, that occurred possibly during periods of warm and humid climate.

Cuticular defects lead to full immunity to a major plant pathogen.

In addition to its role as a barrier, the cuticle is also a source of signals perceived by invading fungi. Cuticular breakdown products have been shown previously to be potent inducers of cutinase or developmental processes in fungal pathogens. Here the question was addressed as to whether plants themselves can perceive modifications of the cuticle. This was studied using Arabidopsis thaliana plants with altered cuticular structure. The expression of a cell wall-targeted fungal cutinase in A. thaliana was found to provide total immunity to Botrytis cinerea. The response observed in such cutinase-expressing plants is independent of signal transduction pathways involving salicylic acid, ethylene or jasmonic acid. It is accompanied by the release of a fungitoxic activity and increased expression of members of the lipid transfer protein, peroxidase and protein inhibitor gene families that provide resistance when overexpressed in wild-type plants. The same experiments were made in the bodyguard (bdg) mutant of A. thaliana. This mutant exhibits cuticular defects and remained free of symptoms after inoculation with B. cinerea. The expression of resistance was accompanied by the release of a fungitoxic activity and increased expression of the same genes as observed in cutinase-expressing plants. Structural defects of the cuticle can thus be converted into an effective multi-factorial defence, and reveal a hitherto hidden aspect of the innate immune response of plants.

Contribution of isotope ratio mass spectrometry to the investigation of improvised explosives: isotopic study of black powders ans ammonium nitrates

The establishment of legislative rules about explosives in the eighties has reduced the illicit use of military and civilian explosives. However, bomb-makers have rapidly taken advantage of substances easily accessible and intended for licit uses to produce their own explosives. This change in strategy has given rise to an increase of improvised explosive charges, which is moreover assisted by the ease of implementation of the recipes, widely available through open sources. While the nature of the explosive charges has evolved, instrumental methods currently used in routine, although more sensitive than before, have a limited power of discrimination and allow mostly the determination of the chemical nature of the substance. Isotope ratio mass spectrometry (IRMS) has been applied to a wide range of forensic materials. Conclusions drawn from the majority of the studies stress its high power of discrimination. Preliminary studies conducted so far on the isotopic analysis of intact explosives (pre-blast) have shown that samples with the same chemical composition and coming from different sources could be differentiated. The measurement of stable isotope ratios appears therefore as a new and remarkable analytical tool for the discrimination or the identification of a substance with a definite source. However, much research is still needed to assess the validity of the results in order to use them either in an operational prospect or in court. Through the isotopic study of black powders and ammonium nitrates, this research aims at evaluating the contribution of isotope ratio mass spectrometry to the investigation of explosives, both from a pre-blast and from a post-blast approach. More specifically, the goal of the research is to provide additional elements necessary to a valid interpretation of the results, when used in explosives investigation. This work includes a fundamental study on the variability of the isotopic profile of black powder and ammonium nitrate in both space and time. On one hand, the inter-variability between manufacturers and, particularly, the intra-variability within a manufacturer has been studied. On the other hand, the stability of the isotopic profile over time has been evaluated through the aging of these substances exposed to different environmental conditions. The second part of this project considers the applicability of this high-precision technology to traces and residues of explosives, taking account of the characteristics specific to the field, including their sampling, a probable isotopic fractionation during the explosion, and the interferences with the matrix of the site.