99 resultados para Physics educational laboratory
Resumo:
Synchrotron radiation X-ray tomographic microscopy is a nondestructive method providing ultra-high-resolution 3D digital images of rock microstructures. We describe this method and, to demonstrate its wide applicability, we present 3D images of very different rock types: Berea sandstone, Fontainebleau sandstone, dolomite, calcitic dolomite, and three-phase magmatic glasses. For some samples, full and partial saturation scenarios are considered using oil, water, and air. The rock images precisely reveal the 3D rock microstructure, the pore space morphology, and the interfaces between fluids saturating the same pore. We provide the raw image data sets as online supplementary material, along with laboratory data describing the rock properties. By making these data sets available to other research groups, we aim to stimulate work based on digital rock images of high quality and high resolution. We also discuss and suggest possible applications and research directions that can be pursued on the basis of our data.
Resumo:
In this paper the rift between Jevons and Mill over the method of political economy serves as a prehistory to recent attempts of behavioural economists to once again explain economic behaviour by taking recourse to mankind's physiology. While Mill relied on the association psychology and its introspective method to establish indubitable first principles, Jevons scorned all recourse to introspection. As exemplified for Jevons's theory of labour, psychophysiology gave Jevons the means to think about economic behaviour in terms of functional form, and promised its assessment by means of experiments. Thus levelling down the Victorian distinction between mind and matter, Jevons turned political economy into social physics.
Resumo:
In many high income developed countries, obesity is inversely associated with educational level. In some countries, a widening gap of obesity between educational groups has been reported. The aim of this study was to assess trends in body mass index (BMI) and in prevalence of overweight and obesity and their association with educational level in the adult Swiss population. Four cross-sectional National health interview surveys conducted in 1992/93 (n = 14,521), 1997 (n = 12,474), 2002 (n = 18,908) and 2007 (n = 17,879) using representative samples of the Swiss population (age range 18-102 years). BMI was derived from self-reported data. Overweight was defined as BMI > or = 25 and <30 kg/m(2), and obesity as BMI > or = 30 kg/m(2). Mean (+/- standard deviation) BMI increased from 24.7 +/- 3.6 in 1992/3 to 25.4 +/- 3.6 kg/m2 in 2007 in men and 22.8 +/- 3.8 to 23.7 +/- 4.3 kg/m(2) in women. Between 1992/3 and 2007, the prevalence of overweight + obesity increased from 40.4% to 49.5% in men and from 22.3% to 31.3% in women, while the prevalence of obesity increased from 6.3% to 9.4% in men and from 4.9% to 8.5% in women. The rate of increase in the prevalence of obesity was greater between 1992/3 and 2002 (men: +0.26%/year; women: +0.31%/year) than between 2002 and 2007 (men: +0.10%/year; women: +0.10%/year). A sizable fraction (approximately 25%) of the increasing mean BMI was due to increasing age of the participants over time. The increase was larger in low than high education strata of the population. BMI was strongly associated with low educational level among women and this gradient remained fairly constant over time. A weaker similar gradient by educational level was apparent in men, but it tended to increase over time. In Switzerland, overweight and obesity increased between 1992 and 2007 and was associated with low education status in both men and women. A trend towards a stabilization of mean BMI levels was noted in most age categories since 2002. The increase in the prevalence of obesity was larger in low education strata of the population. These findings suggest that obesity preventive measures should be targeted according to educational level in Switzerland.
Resumo:
Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has recently been introduced in diagnostic microbiology laboratories for the identification of bacterial and yeast strains isolated from clinical samples. In the present study, we prospectively compared MALDI-TOF MS to the conventional phenotypic method for the identification of routine isolates. Colonies were analyzed by MALDI-TOF MS either by direct deposition on the target plate or after a formic acid-acetonitrile extraction step if no valid result was initially obtained. Among 1,371 isolates identified by conventional methods, 1,278 (93.2%) were putatively identified to the species level by MALDI-TOF MS and 73 (5.3%) were identified to the genus level, but no reliable identification was obtained for 20 (1.5%). Among the 1,278 isolates identified to the species level by MALDI-TOF MS, 63 (4.9%) discordant results were initially identified. Most discordant results (42/63) were due to systematic database-related taxonomical differences, 14 were explained by poor discrimination of the MALDI-TOF MS spectra obtained, and 7 were due to errors in the initial conventional identification. An extraction step was required to obtain a valid MALDI-TOF MS identification for 25.6% of the 1,278 valid isolates. In conclusion, our results show that MALDI-TOF MS is a fast and reliable technique which has the potential to replace conventional phenotypic identification for most bacterial strains routinely isolated in clinical microbiology laboratories.
Resumo:
OBJECTIVE: We examined the correlation between clinical wear rates of restorative materials and enamel (TRAC Research Foundation, Provo, USA) and the results of six laboratory test methods (ACTA, Alabama (generalized, localized), Ivoclar (vertical, volumetric), Munich, OHSU (abrasion, attrition), Zurich). METHODS: Individual clinical wear data were available from clinical trials that were conducted by TRAC Research Foundation (formerly CRA) together with general practitioners. For each of the n=28 materials (21 composite resins for intra-coronal restorations [20 direct and 1 indirect], 5 resin materials for crowns, 1 amalgam, enamel) a minimum of 30 restorations had been placed in posterior teeth, mainly molars. The recall intervals were up to 5 years with the majority of materials (n=27) being monitored, however, only for up to 2 years. For the laboratory data, the databases MEDLINE and IADR abstracts were searched for wear data on materials which were also clinically tested by TRAC Research Foundation. Only those data for which the same test parameters (e.g. number of cycles, loading force, type of antagonist) had been published were included in the study. A different quantity of data was available for each laboratory method: Ivoclar (n=22), Zurich (n=20), Alabama (n=17), OHSU and ACTA (n=12), Munich (n=7). The clinical results were summed up in an index and a linear mixed model was fitted to the log wear measurements including the following factors: material, time (0.5, 1, 2 and 3 years), tooth (premolar/molar) and gender (male/female) as fixed effects, and patient as random effect. Relative ranks were created for each material and method; the same was performed with the clinical results. RESULTS: The mean age of the subjects was 40 (±12) years. The materials had been mostly applied in molars (81%) and 95% of the intracoronal restorations were Class II restorations. The mean number of individual wear data per material was 25 (range 14-42). The mean coefficient of variation of clinical wear data was 53%. The only significant correlation was reached by OHSU (abrasion) with a Spearman r of 0.86 (p=0.001). Zurich, ACTA, Alabama generalized wear and Ivoclar (volume) had correlation coefficients between 0.3 and 0.4. For Zurich, Alabama generalized wear and Munich, the correlation coefficient improved if only composites for direct use were taken into consideration. The combination of different laboratory methods did not significantly improve the correlation. SIGNIFICANCE: The clinical wear of composite resins is mainly dependent on differences between patients and less on the differences between materials. Laboratory methods to test conventional resins for wear are therefore less important, especially since most of them do not reflect the clinical wear.
Resumo:
This contribution aims at exploring the significance of the new generation of UNESCO conventions for the recognition of higher education qualifications. It discusses three possible scenarios and links them to the empirical findings of a study that compares the enabling conditions of the first generation of recognition conventions established in the 1970s and 1980s with the ones establishing the second generation today. Taking an interdisciplinary approach, the paper argues that the changes illustrate a more general shift in the architecture of the global order and highlights a new role of UNESCO.
Resumo:
OBJECTIVE: The prevalence of adolescent obesity has increased considerably over the past decade in Switzerland and has become a serious public health problem in Europe. Prevention of obesity using various comprehensive programmes appears to be very promising, although we must admit that several interventions had generally disappointing results compared with the objectives and target initially fixed. Holistic programmes including nutritional education combined with promotion of physical activity and behaviour modification constitute the key factors in the prevention of childhood and adolescent obesity. The purpose of this programme was to incorporate nutrition/physical education as well as psychological aspects in selected secondary schools (9th grade, 14-17 years). METHODS: The educational strategy was based on the development of a series of 13 practical workshops covering wide areas such as physical inactivity, body composition, sugar, energy density, invisible lipids, how to read food labels, is meal duration important? Do you eat with pleasure or not? Do you eat because you are hungry? Emotional eating. For teachers continuing education, a basic highly illustrated guide was developed as a companion booklet to the workshops. These materials were first validated by biology, physical education, dietician and psychologist teachers as well as school medical officers. RESULTS: Teachers considered the practical educational materials innovative and useful, motivational and easy to understand. Up to now (early 2008), the programme has been implemented in 50 classes or more from schools originating from three areas in the French part of Switzerland. Based on the 1-week pedometer value assessed before and after the 1 school-year programme, an initial evaluation indicated that overall physical placidity was significantly decreased as evidenced by a significant rise in the number of steps per day. CONCLUSION: Future evaluation will provide more information on the effectiveness of the ADOS programme.
Resumo:
Rapport de synthèse : Cette recherche s'intéresse (1) au port et à l'utilisation d'armes chez les adolescents ainsi que (2) aux rôles des facteurs environnementaux et individuels dans la violence juvénile. Les données étaient tirés de SMASH 2002 (Swiss multicenter adolescent survey on health 2002), étude dans laquelle un échantillon représentatif de 7548 étudiants et apprentis âgés entre 16 et 20 ans vivant en Suisse ont été interrogés Dans une première étude, les adolescents ayant porté une arme (couteau, masse, coup de poing américain, pistolet/autre arme à feu, spray) durant l'année précédant l'enquête étaient comparés avec ceux n'ayant pas porté d'arme. Ensuite, dans le sous-échantillon de porteurs d'armes, ceux ayant uniquement porté l'arme étaient comparés avec ceux ayant utilisé une arme dans une bagarre. Des facteurs individuels, familiaux, scolaires et sociaux ont été étudiés à l'aide d'analyses bivariées et multivariées. 13.7% des jeunes vivant en Suisse ont porté une arme dans l'année précédant l'enquête. 6.2% des filles porteuses d'armes et 19.9% des garçons porteurs d'armes ont fait usage de l'arme dans une bagarre. Chez les garçons et chez les filles, les porteurs d'armes étaient plus souvent délinquants et victimes de violence physique. Les garçons porteurs d'armes étaient plus souvent des apprentis, à la recherche de sensations fortes, porteurs de tatouages, avaient une mauvaise relation avec leurs parents, étaient dans des bagarres sous l'influence de substances, et avaient des relations sexuelles à risque. En comparaison avec les porteuses d'armes, les filles utilisatrices d'armes étaient plus souvent fumeuses quotidiennes. Les garçons ayant utilisé leur arme étaient plus souvent nés à l'étranger, vivaient dans un milieu urbain, étaient des apprentis, avaient un mauvais contexte scolaire, avaient des relations sexuelles à risque et étaient impliqués dans des bagarres sous l'influence de substances. Nos résultats montrent que porter une arme est un comportement relativement fréquent chez les adolescents vivant en Suisse et qu'une proportion non négligeable de ces porteurs d'armes ont utilisé l'arme dans une bagarre. De ce fait, une discussion sur le port d'arme devrait être incluse dans l'entretien clinique ainsi que dans les programmes de prévention visant les adolescents. Dans une deuxième étude, la violence juvénile était définie comme présente si l'adolescent avait commis au moins un des quatre délits suivants durant l'année précédant l'enquête: attaquer un adulte, arracher ou voler quelque chose, porter une arme ou utiliser une arme dans une bagarre. Des niveaux écologiques étaient testés et résultaient en un modèle à trois niveaux pour les garçons (niveau individuel, niveau classe et niveau école) et, à cause d'une faible prévalence de la violence chez les filles, en un modèle à un niveau (individuel) pour les filles. Des variables dépendantes étaient attribuées à chaque niveau, en se basant sur la littérature. Le modèle multiniveaux des garçons montrait que le niveau école (10%) et le niveau classe (24%) comptaient pour plus d'un tiers de la variance inter-individuelle dans le comportement violent. Les facteurs associés à ce comportement chez les filles étaient être victime de violence physique et la recherche de sensations fortes. Pour les garçons, les facteurs explicatifs de la violence étaient pratiquer des relations sexuelles à risque, être à la recherche de sensations fortes, être victime de violence physique, avoir une mauvaise relation avec les parents, être déprimé et vivre dans une famille monoparentale au niveau individuel, la violence et les actes antisociaux au niveau de la classe et être apprenti au niveau de l'école. Des interventions au niveau de la classe ainsi qu'un règlement explicit en ce qui concerne la violence et d'autres comportements à risque dans des écoles devraient être prioritaires pour la prévention de la violence chez les adolescents. En outre, la prévention devrait tenir compte des différences entre les sexes.
Resumo:
KNOTS are usually categorized in terms of topological properties that are invariant under changes in a knot's spatial configuration(1-4). Here we approach knot identification from a different angle, by considering the properties of particular geometrical forms which we define as 'ideal'. For a knot with a given topology and assembled from a tube of uniform diameter, the ideal form is the geometrical configuration having the highest ratio of volume to surface area. Practically, this is equivalent to determining the shortest piece of tube that can be closed to form the knot. Because the notion of an ideal form is independent of absolute spatial scale, the length-to-diameter ratio of a tube providing an ideal representation is constant, irrespective of the tube's actual dimensions. We report the results of computer simulations which show that these ideal representations of knots have surprisingly simple geometrical properties. In particular, there is a simple linear relationship between the length-to-diameter ratio and the crossing number-the number of intersections in a two-dimensional projection of the knot averaged over all directions. We have also found that the average shape of knotted polymeric chains in thermal equilibrium is closely related to the ideal representation of the corresponding knot type. Our observations provide a link between ideal geometrical objects and the behaviour of seemingly disordered systems, and allow the prediction of properties of knotted polymers such as their electrophoretic mobility(5).
Resumo:
High altitude constitutes an exciting natural laboratory for medical research. Although initially, the aim of high-altitude research was to understand the adaption of the organism to hypoxia and find treatments for altitude-related diseases, during the past decade or so, the scope of this research has broadened considerably. Two important observations led the foundation for the broadening of the scientific scope of high-altitude research. First, high-altitude pulmonary edema represents a unique model that allows studying fundamental mechanisms of pulmonary hypertension and lung edema in humans. Second, the ambient hypoxia associated with high-altitude exposure facilitates the detection of pulmonary and systemic vascular dysfunction at an early stage. Here, we will review studies that, by capitalizing on these observations, have led to the description of novel mechanisms underpinning lung edema and pulmonary hypertension and to the first direct demonstration of fetal programming of vascular dysfunction in humans.
Resumo:
The study of wave propagation at sonic frequency in soil leads to elasticity parameter determination. These parameters are compatible to those measured simultaneously by static loading. The acquisition of in situ elasticity parameter combined with laboratory description of the elastoplastic behaviour can lead to in situ elastoplastic curves. - L'étude de la propagation des ondes acoustiques permet la détermination des paramètres d'élasticité dans les sols. Ces paramètres sont cohérents avec des mesures statiques simultanées. L'acquisition des paramètres d'élasticité in situ associée à une description du comportement élasto-plastique mesuré en laboratoire permet d'obtenir des courbes d'élastoplasticité in situ.
Resumo:
The concept of ideal geometric configurations was recently applied to the classification and characterization of various knots. Different knots in their ideal form (i.e., the one requiring the shortest length of a constant-diameter tube to form a given knot) were shown to have an overall compactness proportional to the time-averaged compactness of thermally agitated knotted polymers forming corresponding knots. This was useful for predicting the relative speed of electrophoretic migration of different DNA knots. Here we characterize the ideal geometric configurations of catenanes (called links by mathematicians), i.e., closed curves in space that are topologically linked to each other. We demonstrate that the ideal configurations of different catenanes show interrelations very similar to those observed in the ideal configurations of knots. By analyzing literature data on electrophoretic separations of the torus-type of DNA catenanes with increasing complexity, we observed that their electrophoretic migration is roughly proportional to the overall compactness of ideal representations of the corresponding catenanes. This correlation does not apply, however, to electrophoretic migration of certain replication intermediates, believed up to now to represent the simplest torus-type catenanes. We propose, therefore, that freshly replicated circular DNA molecules, in addition to forming regular catenanes, may also form hemicatenanes.
Resumo:
This article examines the extent and limits of non-state forms of authority in international relations. It analyses how the information and communication technology (ICT) infrastructure for the tradability of services in a global knowledge-based economy relies on informal regulatory practices for adjustment of ICT-related skills. Companies and associations provide training and certification programmes as part of a growing market for educational services setting their own standards. The existing literature on non-conventional forms of authority in the global political economy has emphasised that the consent of actors subject to informal rules and explicit or implicit state recognition remains crucial for the effectiveness of those new forms of power. However, analyses based on a limited sample of actors tend toward a narrow understanding of the issues and fail to fully explore the differentiated space in which non-state authority is emerging. This paper examines the form of authority underpinning the global knowledge-based economy within the broader perspective of the issues likely to be standardised by technical ICT specification, the wide range of actors involved, and the highly differentiated space where standards become authoritative. The empirical findings highlight the role of different private actors in establishing international educational norms in this field. They also pinpoint the limits of profit-oriented standard-settings, notably with regard to generic norms.