General electromagnetic simulation tool to predict the microwave nonlinear response of planar, arbitrarily-shaped HTS structures

This work describes a simulation tool being developed at UPC to predict the microwave nonlinear behavior of planar superconducting structures with very few restrictions on the geometry of the planar layout. The software is intended to be applicable to most structures used in planar HTS circuits, including line, patch, and quasi-lumped microstrip resonators. The tool combines Method of Moments (MoM) algorithms for general electromagnetic simulation with Harmonic Balance algorithms to take into account the nonlinearities in the HTS material. The Method of Moments code is based on discretization of the Electric Field Integral Equation in Rao, Wilton and Glisson Basis Functions. The multilayer dyadic Green's function is used with Sommerfeld integral formulation. The Harmonic Balance algorithm has been adapted to this application where the nonlinearity is distributed and where compatibility with the MoM algorithm is required. Tests of the algorithm in TM010 disk resonators agree with closed-form equations for both the fundamental and third-order intermodulation currents. Simulations of hairpin resonators show good qualitative agreement with previously published results, but it is found that a finer meshing would be necessary to get correct quantitative results. Possible improvements are suggested.

An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials

A thermodynamically consistent damage model for the simulation of progressive delamination under variable mode ratio is presented. The model is formulated in the context of the Damage Mechanics. The constitutive equation that results from the definition of the free energy as a function of a damage variable is used to model the initiation and propagation of delamination. A new delamination initiation criterion is developed to assure that the formulation can account for changes in the loading mode in a thermodynamically consistent way. The formulation proposed accounts for crack closure effets avoiding interfacial penetration of two adjacent layers aftercomplete decohesion. The model is implemented in a finite element formulation. The numerical predictions given by the model are compared with experimental results

Interfaz de usuario para un simulador de redes de Petri coloreadas

Aquest projecte presenta el desenvolupament d'una interficie d'usuari que permet visualitzar i interpretar, en forma de text o en forma gràfica, els resultats de la simulació de models de Xarxes de Petri Acolorides (XPAs). L'estudi de les solucions obtingudes mitjançant la simulació de models de XPAs, permetrà analitzar i evaluar tant el comportament com el rendiment del sistema modelat. La interficie ha estat programada en Visual C++.

Anàlisi mitjançant mecànica de fluids computacional d’un aerogenerador minieòlic

A la UdGhi ha 2 aerogeneradors minieòlics: el del terrat del P2 i un de més petit allaboratori d’energies. Aquest segon aerogenerador minieòlic és el que s’ha utilitzat en aquestprojecte. Es tracta d’un Air-X de la casa Technosun amb les següents característiques:- Té un pes de 6Kg, un radi de 0,582 metres, un TSR de 8,8 i unapotència de 545W.- Perfil de la pala tipus SD2030.- Velocitat d’engegada de 3m/s.-Amb vents forts (més de 15m/s) un dispositiu electrònic redueix lavelocitat fins a 600rpm, reduint les càrregues sobre la turbina i l’estructuramentre encara segueix produint energia.- Baix manteniment. Només consta de dues parts mòbils.L’objecte que s’ha plantejat per aquest projecte ha estat trobar la corbade potència del minigenerador Air-X mitjançant simulació amb CFD, iutilitzant només les dades geomètriques de l’aparell

Experimental investigation of transient natural convection cooling of high prandtl number fluid with variable viscosity

Report for the scientific sojourn at the James Cook University, Australia, between June to December 2007. Free convection in enclosed spaces is found widely in natural and industrial systems. It is a topic of primary interest because in many systems it provides the largest resistance to the heat transfer in comparison with other heat transfer modes. In such systems the convection is driven by a density gradient within the fluid, which, usually, is produced by a temperature difference between the fluid and surrounding walls. In the oil industry, the oil, which has High Prandtl, usually is stored and transported in large tanks at temperatures high enough to keep its viscosity and, thus the pumping requirements, to a reasonable level. A temperature difference between the fluid and the walls of the container may give rise to the unsteady buoyancy force and hence the unsteady natural convection. In the initial period of cooling the natural convection regime dominates over the conduction contribution. As the oil cools down it typically becomes more viscous and this increase of viscosity inhibits the convection. At this point the oil viscosity becomes very large and unloading of the tank becomes very difficult. For this reason it is of primary interest to be able to predict the cooling rate of the oil. The general objective of this work is to develop and validate a simulation tool able to predict the cooling rates of high Prandtl fluid considering the variable viscosity effects.

Intestinal content detection in capsule endoscopy using robust features

This work covers two aspects. First, it generally compares and summarizes the similarities and differences of state of the art feature detector and descriptor and second it presents a novel approach of detecting intestinal content (in particular bubbles) in capsule endoscopy images. Feature detectors and descriptors providing invariance to change of perspective, scale, signal-noise-ratio and lighting conditions are important and interesting topics in current research and the number of possible applications seems to be numberless. After analysing a selection of in the literature presented approaches, this work investigates in their suitability for applications information extraction in capsule endoscopy images. Eventually, a very good performing detector of intestinal content in capsule endoscopy images is presented. A accurate detection of intestinal content is crucial for all kinds of machine learning approaches and other analysis on capsule endoscopy studies because they occlude the field of view of the capsule camera and therefore those frames need to be excluded from analysis. As a so called “byproduct” of this investigation a graphical user interface supported Feature Analysis Tool is presented to execute and compare the discussed feature detectors and descriptor on arbitrary images, with configurable parameters and visualized their output. As well the presented bubble classifier is part of this tool and if a ground truth is available (or can also be generated using this tool) a detailed visualization of the validation result will be performed.

Control de instrumentos mediante el bus GPIB programado con MATLAB

El proyecto que se expone a continuación está dedicado al control de instrumentos mediante el bus de instrumentación GPIB programado con el software Matlab. Está dividido en dos partes. La primera, será llevada a cabo en el laboratorio de docencia y el objetivo será controlar el osciloscopio y el generador de funciones. Como ejemplo del control realizado se desarrollará una aplicación que permitirá obtener el diagrama de Bode de módulo de cualquier sistema electrónico. La segunda parte será llevada a cabo en el laboratorio de investigación y el objetivo será controlar el analizador de semiconductores. En este caso, la aplicación desarrollada permitirá la realización de medidas para la caracterización de transistores. Las aplicaciones de ambas partes estarán realizadas mediante una interfaz gráfica de usuario diseñada con la herramienta GUIDE de Matlab.

Simulació d'escenaris de xarxa DTN amb NS-2

En aquest projecte es presenta un escenari de xarxa DTN. Aquest escenari té una serie de problemes que dificulten l’encaminament. Al projecte s’ha proposat un protocol d’encaminament que permet superar aquestes dificultats. Per realitzar això ha estat necessari estudiar i adquirir un coneixement profund sobre el funcionament dels protocols de xarxes DTN. Per demostrar que aquesta proposta solucionava els problemes es presenta l’anàlisi dels resultats d’aplicar el protocol a l’escenari, aquests resultats s’han obtingut amb l’eina de simulació de xarxes NS-2.

Desarrollo de una plataforma bioinformática para la gestión de datos fenotípicos y moleculares

Este proyecto está orientado a ayudar a un grupo de investigadores del Departamento de Ciencia Animal y de los Alimentos (UAB), que se dedican a recopilar datos genómicos obtenidos en experimentos. La aplicación constará de dos partes. La primera es la parte de los usuarios, donde se podrá crear proyectos, insertar, modificar o eliminar datos y consultar la información ya existente en la aplicación. La segunda parte es la del administrador, que como tal podrá dar de alta a nuevos usuarios, restaurar versiones anteriores de la base de datos, eliminar usuarios y consultar las acciones realizadas por los usuarios.

Towards a user-friendly webservice architecture for statistical machine translation in the PANACEA project

This paper presents a webservice architecture for Statistical Machine Translation aimed at non-technical users. A workfloweditor allows a user to combine different webservices using a graphical user interface. In the current state of this project,the webservices have been implemented for a range of sentential and sub-sententialaligners. The advantage of a common interface and a common data format allows the user to build workflows exchanging different aligners.

Genome-wide DNA polymorphism analyses using VariScan

BACKGROUND: DNA sequence polymorphisms analysis can provide valuable information on the evolutionary forces shaping nucleotide variation, and provides an insight into the functional significance of genomic regions. The recent ongoing genome projects will radically improve our capabilities to detect specific genomic regions shaped by natural selection. Current available methods and software, however, are unsatisfactory for such genome-wide analysis. RESULTS: We have developed methods for the analysis of DNA sequence polymorphisms at the genome-wide scale. These methods, which have been tested on a coalescent-simulated and actual data files from mouse and human, have been implemented in the VariScan software package version 2.0. Additionally, we have also incorporated a graphical-user interface. The main features of this software are: i) exhaustive population-genetic analyses including those based on the coalescent theory; ii) analysis adapted to the shallow data generated by the high-throughput genome projects; iii) use of genome annotations to conduct a comprehensive analyses separately for different functional regions; iv) identification of relevant genomic regions by the sliding-window and wavelet-multiresolution approaches; v) visualization of the results integrated with current genome annotations in commonly available genome browsers. CONCLUSION: VariScan is a powerful and flexible suite of software for the analysis of DNA polymorphisms. The current version implements new algorithms, methods, and capabilities, providing an important tool for an exhaustive exploratory analysis of genome-wide DNA polymorphism data.

Implantació d'un sistema SCADA en una cèl·lula flexible de fabricació

La Universitat de Vic disposa, entre altres equips, d’una cèl·lula flexible de fabricació, del fabricant Festo, que simula un procés de formació de palets amb els productes que es disposen en un magatzem intermedi. Aquesta cèl·lula està composta de quatre estacions de muntatge diferenciades (càrrega de palets, càrrega de plaques, magatzem intermedi i transport). Cada una disposa d'un PLC SIEMENS S7-300 per la seva automatització, i tots aquests es troben interconnectats amb una xarxa industrial Profibus. L'objectiu d'aquest projecte és implantar el sistema SCADA Vijeo Citect pel control i supervisió de l'estació magatzem d'aquesta cèl·lula flexible de fabricació, establint també un intercanvi de dades entre l'SCADA i el Microsoft Access, per poder ser utilitzat per la docència. Aquest projecte s'ha desenvolupat en cinc fases diferents: 1. La primera fase s'ha dedicat a l'automatització pròpiament de l'estació magatzem a partir de l'autòmat programable Siemens S7-300 i complint amb les necessitats plantejades. 2. En la segona fase s'ha programat i establert la comunicació per l'intercanvi de dades (lectura i escriptura) entre el sistema SCADA Vijeo Citect i la base de dades de Microsoft Access. 3. En la tercera fase s'ha elaborat i programat l'entorn gràfic de supervisió i control del procés a partir del sistema SCADA Vijeo Citect. 4. En la quarta fase s'ha instal·lat un OPC Server en el PC i s'ha establert la comunicació entre el PLC i el sistema SCADA. 5. Finalment s'ha anat revisant i depurant les diferents programacions i comunicacions per tal de que el sistema funcioni com a un conjunt.

Genome-wide DNA polymorphism analyses using VariScan

BACKGROUND: DNA sequence polymorphisms analysis can provide valuable information on the evolutionary forces shaping nucleotide variation, and provides an insight into the functional significance of genomic regions. The recent ongoing genome projects will radically improve our capabilities to detect specific genomic regions shaped by natural selection. Current available methods and software, however, are unsatisfactory for such genome-wide analysis. RESULTS: We have developed methods for the analysis of DNA sequence polymorphisms at the genome-wide scale. These methods, which have been tested on a coalescent-simulated and actual data files from mouse and human, have been implemented in the VariScan software package version 2.0. Additionally, we have also incorporated a graphical-user interface. The main features of this software are: i) exhaustive population-genetic analyses including those based on the coalescent theory; ii) analysis adapted to the shallow data generated by the high-throughput genome projects; iii) use of genome annotations to conduct a comprehensive analyses separately for different functional regions; iv) identification of relevant genomic regions by the sliding-window and wavelet-multiresolution approaches; v) visualization of the results integrated with current genome annotations in commonly available genome browsers. CONCLUSION: VariScan is a powerful and flexible suite of software for the analysis of DNA polymorphisms. The current version implements new algorithms, methods, and capabilities, providing an important tool for an exhaustive exploratory analysis of genome-wide DNA polymorphism data.

Desarrollo de mejoras y nuevas funcionalidades a eXeLearning.net y colaboración con la comunidad de software libre exelearning.net

En este TFM se detallan las mejoras realizadas a la aplicación eXeLearning.net, así como otras aportaciones a la comunidad realizadas durante el proyecto de fin de máster de Software libre. eXeLearning.net es una aplicación de software libre para la creación de materiales educativos digitales, desarrollada en Python, con una interfaz web (HTML + JavaScript). En este proyecto se desarrollaron entre otras cosas: un repositorio de estilos en la web oficial de la aplicación, disponibles para su descarga desde la aplicación de escritorio, la creación y mantenimiento de un repositorio en Launchpad y una funcionalidad para publicar los contenidos creados con eXeLearning.net directamente en Google Drive.

Interfície tridimensional EGP TV digital

En este proyecto se presenta una aplicación capaz de recibir la televisión digital y representar la información que contiene en un entorno de producción de gráficos tridimensionales. Esto conlleva recoger y procesar el flujo de transporte para más de un servicio, procesar las diferentes tablas de información, implementar mecanismos para representar la información audiovisual en un entorno tridimensional y construir una interfaz de usuario con los datos recogidos.