Reference prices: the spanish way

The aim of this paper is to analyse the effects of recent regulatory reforms that Spanish Health Authorities have implemented in the pharmaceutical market: the introduction of a reference price system together with the promotion of generic drugs. The main objectives of these two reforms are to increase price competition and, ultimately, reduce pharmaceutical costs. Before the introduction of reference prices, consumers had to pay a fixed copayment of the price of whatever drug purchased. With the introduction of such system, the situation differs in the following way: if (s)he buys the more expensive branded drug, then (s)he pays a sum of two elements: the copayment associated to the reference price plus the difference between the price of this good and the reference price. However, if the consumer decides to buy the generic alternative, with price lower than the reference price, then (s)he has to pay the same copayment as before. We show that the introduction of a reference price system together with the promotion of generic drugs increase price competition and lower pharmaceutical costs only if the reference price is set in a certain interval. Also profits for the duopolists might be reduced. These results are due to the opposing effects that reference prices have on branded and generic producers respectively.

Diseño y desarrollo de un equipo de caracterización de ISFET para la medida de analitos iónicos

En este proyecto se desarrolla una unidad de medida para investigar la cuantificación de la concentración de analitos iónicos en análisis clínico mediante sensores ISFET. Para su desarrollo se precisa de un elemento que simule el comportamiento de un ISFET por lo que también se desarrolla un simulador de ISFET. Para realizar la unidad de medida se diseñan unos circuitos SMU que permiten polarizar en tensión y medir la corriente de cada terminal de un ISFET y del electrodo de referencia que actúa de puerta. El simulador se realiza con un MOSFET de la misma geometría que el ISFET y dos generadores de tensión programables. Desarrollados y validados los circuitos correspondientes, obtenemos unos excelentes resultados en el simulador que se revela de gran utilidad para la puesta en marcha de la unidad de medida, la cual ofrece unos resultados bastante buenos, si bien se aprecian ciertas corrientes de fuga que no permiten alcanzar toda la exactitud que se pretendía. Ello es debido a los circuitos impresos que deberán ser mejorados hasta conseguir la exactitud deseada. Sin embargo pueden darse por válidos los circuitos de medida diseñados.

Decentralized model reference control of flexible cable-stayed beam structures

A decentralized model reference controller is designed to reduce the magnitude of the transversal vibration of a flexible cable-stayed beam structure induced by a seismic excitation. The controller design is made based on the principle of sliding mode such that a priori knowledge

Two methods for voltage sag source location

This paper presents and compares two approaches to estimate the origin (upstream or downstream) of voltage sag registered in distribution substations. The first approach is based on the application of a single rule dealing with features extracted from the impedances during the fault whereas the second method exploit the variability of waveforms from an statistical point of view. Both approaches have been tested with voltage sags registered in distribution substations and advantages, drawbacks and comparative results are presented

A survey on voltage sag events in power systems

This paper aims to survey the techniques and methods described in literature to analyse and characterise voltage sags and the corresponding objectives of these works. The study has been performed from a data mining point of view

Unusual voltage sag event detection in power systems

Three multivariate statistical tools (principal component analysis, factor analysis, analysis discriminant) have been tested to characterize and model the sags registered in distribution substations. Those models use several features to represent the magnitude, duration and unbalanced grade of sags. They have been obtained from voltage and current waveforms. The techniques are tested and compared using 69 registers of sags. The advantages and drawbacks of each technique are listed

Modification of the Perrine-Baum diagram to improve the calculation of high voltage electric lines

Through the history of Electrical Engineering education, vectorial and phasorial diagrams have been used as a fundamental learning tool. At present, computational power has replaced them by long data lists, the result of solving equation systems by means of numerical methods. In this sense, diagrams have been shifted to an academic background and although theoretically explained, they are not used in a practical way within specific examples. This fact may be against the understanding of the complex behavior of the electrical power systems by students. This article proposes a modification of the classical Perrine-Baum diagram construction to allowing both a more practical representation and a better understanding of the behavior of a high-voltage electric line under different levels of load. This modification allows, at the same time, the forecast of the obsolescence of this behavior and line’s loading capacity. Complementary, we evaluate the impact of this tool in the learning process showing comparative undergraduate results during three academic years

GENCODE: producing a reference annotation for ENCODE

Background: The GENCODE consortium was formed to identify and map all protein-coding genes within the ENCODE regions. This was achieved by a combination of initial manualannotation by the HAVANA team, experimental validation by the GENCODE consortium and a refinement of the annotation based on these experimental results.Results: The GENCODE gene features are divided into eight different categories of which onlythe first two (known and novel coding sequence) are confidently predicted to be protein-codinggenes. 5’ rapid amplification of cDNA ends (RACE) and RT-PCR were used to experimentallyverify the initial annotation. Of the 420 coding loci tested, 229 RACE products have beensequenced. They supported 5’ extensions of 30 loci and new splice variants in 50 loci. In addition,46 loci without evidence for a coding sequence were validated, consisting of 31 novel and 15putative transcripts. We assessed the comprehensiveness of the GENCODE annotation byattempting to validate all the predicted exon boundaries outside the GENCODE annotation. Outof 1,215 tested in a subset of the ENCODE regions, 14 novel exon pairs were validated, only twoof them in intergenic regions.Conclusions: In total, 487 loci, of which 434 are coding, have been annotated as part of theGENCODE reference set available from the UCSC browser. Comparison of GENCODEannotation with RefSeq and ENSEMBL show only 40% of GENCODE exons are contained withinthe two sets, which is a reflection of the high number of alternative splice forms with uniqueexons annotated. Over 50% of coding loci have been experimentally verified by 5’ RACE forEGASP and the GENCODE collaboration is continuing to refine its annotation of 1% humangenome with the aid of experimental validation.

Interplay of spectral efficiency, power and doppler spectrum for reference-signal-assisted wireless communication

Expressions relating spectral efficiency, power, and Doppler spectrum, are derived for Rayleigh-faded wireless channels with Gaussian signal transmission. No side information on the state of the channel is assumed at the receiver. Rather, periodic reference signals are postulated in accordance with the functioning of most wireless systems. The analysis relies on a well-established lower bound, generally tight and asymptotically exact at low SNR. In contrast with most previous studies, which relied on block-fading channel models, a continuous-fading model is adopted. This embeds the Doppler spectrum directly in the derived expressions, imbuing them with practical significance. Closed-form relationships are obtained for the popular Clarke-Jakes spectrum and informative expansions, valid for arbitrary spectra, are found for the low- and high-power regimes. While the paper focuses on scalar channels, the extension to multiantenna settings is also discussed.

Spectral efficiency in reference-signal-assisted low-power wireless communication

Expressions relating spectral efficiency, power and Doppler spectrum are derived for low-power Rayleighfaded wireless channels with proper complex signaling. Noside information on the state of the channel is assumed at the receiver. Rather, periodic reference signals are postulated inaccordance with the functioning of most wireless systems. In contrast with most previous studies, which relied on block-fading channel models, a continuous-fading model is adopted. This embeds the Doppler spectrum directly in thederived expressions thereby imbuing them with practical significance.

The impact of the reference price system on the pharmaceutical market: A theoretical approach

This article analyses the impact of the reference pricesystem on the price-setting strategies of thepharmaceutical firms and on the level of generic usage.This model is the first to take explicitly into accountthe impact of the reference price mechanism on the levelof competition between brand-name and generic drugs andnational pharmaceutical spending. We consider aduopolistic model with one firm producing the brand-namedrug, whose patent has already expired, and the otherproducing the corresponding generic version. We work ina partial equilibrium framework where firms set pricessequentially and consumers face heterogeneous switchingcosts.We show that brand producers compensate thedecline of profits by selling greater quantities insteadof charging higher prices, thus fostering pricecompetition in the pharmaceutical market. This result isa consequence of both the assumption of a verticallydifferentiated model and the introduction of thereference price system.

Review of the literature on reference pricing

This paper reviews the literature on reference pricing (RP) in pharmaceutical markets. The RP strategy for cost containment of expenditure on drugs is analyzed as part of the procurement mechanism. We review the existing literature and the state-of-the-art regarding RP by focusing on its economic effects. In particular, we consider: (1) the institutional context and problem-related factors which appear to underline the need to implement an RP strategy; i.e., its nature, characteristics and the sort of health care problems commonly addressed; (2) how RP operates in practice; that is, how third party-payers (the insurers/buyers) have established the RP systems existing on the international scene (i.e., information methods, monitoring procedures and legislative provisions); (3)the range of effects resulting from particular RP strategies (including effects on choice of appropriate pharmaceuticals, insurer savings, total drug expenditures, prices of referenced and non-referenced products and dynamic efficiency; (4) the market failures which an RP policy is supposed to address and the main advantages and drawbacks which emerge from an analysis of its effects. Results suggest that RP systems achieve better their postulated goals (1) if cost inflation in pharmaceuticals is due to high prices rather than to the excess of prescription rates, (2) when the larger is the existing difference in prices among equivalent drugs, and (3) more important is the actual market for generics.

The impact of generic reference pricing interventions in the statin market

The objective of this study was to evaluate the intended and unintended impact on pharmaceutical use and sales of three public financing reforms applied to the prescription of statins: a Spanish generic reference pricing (RP) system for lovastatin and simvastatin, and two competing policies introduced by the Andalusian Public Health Service (APHS) for all statins, first a maximum consumer price (MCP) and then a so called quality prescribing incentive for general practitioners (MCP plus PI).This study is designed as an observational, retrospective, interrupted time series analysis with comparison series (APHS and the rest of Spain) of 46 monthly drug use and sales ratios from January 2001 to October 2004 for each active ingredient in the group of statins.RP has been effective at reducing the volume of sales growth of the off-patent statins, yet its overall impact on sales of all statins has been relatively modest. The quantity and volume of sales impact heavily depends on regulatory RP details such as when the system is introduced, how often it is updated, and how the reference price is calculated.

A theory of reference-dependent behavior

Extensive field and experimental evidence in a variety of environments show that behavior depends on a reference point. This paper provides an axiomatic characterization of this dependence. We proceed by imposing gradually more structure on both choice correspondences and preference relations, requiring increasingly higher levels of rationality, and freeing the decision-maker from certain types of inconsistencies. The appropriate degree of behavioral structure will depend on the phenomenon that is to be modeled. Lastly, we provide two applications of our work: one to model the status-quo bias, and another to model addictive behavior.