Semiactive backstepping control for vibration attenuation in structures equipped with magnetorheological actuatorscat

This paper deals with the problem of semiactive vibration control of civil engineering structures subject to unknown external disturbances (for example, earthquakes, winds, etc.). Two kinds of semiactive controllers are proposed based on the backstepping control technique. The experimental setup used is a 6-story test structure equipped with shear-mode semiactive magnetorheological dampers being installed in the Washington University Structural Control and Earthquake Engineering Laboratory (WUSCEEL). The experimental results obtained have verified the effectiveness of the proposed control algorithms

A mixed H2/H∞-based semiactive control for vibration mitigation in flexible structures

In this paper, we address this problem through the design of a semiactive controller based on the mixed H2/H∞ control theory. The vibrations caused by the seismic motions are mitigated by a semiactive damper installed in the bottom of the structure. It is meant by semiactive damper, a device that absorbs but cannot inject energy into the system. Sufficient conditions for the design of a desired control are given in terms of linear matrix inequalities (LMIs). A controller that guarantees asymptotic stability and a mixed H2/H∞ performance is then developed. An algorithm is proposed to handle the semiactive nature of the actuator. The performance of the controller is experimentally evaluated in a real-time hybrid testing facility that consists of a physical specimen (a small-scale magnetorheological damper) and a numerical model (a large-scale three-story building)

QFT control for vibration reduction in structures equipped with MR dampers

This short paper addresses the problem of designing a QFT (quantitative feedback theory) based controllers for the vibration reduction in a 6-story building structure equipped with shear-mode magnetorheological dampers. A new methodology is proposed for characterizing the nonlinear hysteretic behavior of the MR damper through the uncertainty template in the Nichols chart. The design procedure for QFT control design is briefly presented

Vibration and two-photon absorption

The rigorous and transparent treatment of the effects of nuclear vibrational motion in two-photon absorption (TPA) was discussed. Perturbation formula for diatomic molecules were developed and applied to the X¹Σ+–A¹Π transition in CO. The analysis showed that the vibrations played an important role in TPA, just as their role in the calculation of conventional nonlinear optical (NLO) hyperpolarizabilities

A comparative analysis of two methods for the calculation of electric-field-induced perturbations to molecular vibration

Two common methods of accounting for electric-field-induced perturbations to molecular vibration are analyzed and compared. The first method is based on a perturbation-theoretic treatment and the second on a finite-field treatment. The relationship between the two, which is not immediately apparent, is made by developing an algebraic formalism for the latter. Some of the higher-order terms in this development are documented here for the first time. As well as considering vibrational dipole polarizabilities and hyperpolarizabilities, we also make mention of the vibrational Stark effec

Is there a wage penalty for horizontal and vertical mismatch?

This paper studies how the horizontal and vertical mismatches in the labor market affect wage. We do so by taking into account that by choosing a job, wage and mismatches are simultaneously determined. The Seemingly Unrelated Equations model also allows us to control for any omitted variable that could cause biased estimators. We use REFLEX data for Spain. Results reveal that in most cases being horizontally matched has a wage premium and being over-educated does not affect wage. Results suggest that the modeling strategy successfully accounts for some omitted variable that affects simultaneously the probability of being horizontally matched and the wage. This could explain the existence of a wage penalty for over-educated workers when the omitted variable issue is not dealt with.

Pharmaceutical Generics, Vertical Product Differentiation, and Public Policy

This paper studies oligopolistic competition in off-patent pharmaceutical markets using a vertical product differentiation model. This model can explain the observation that countries with stronger regulations have smaller generic market shares. It can also explain the differences in observed regulatory regimes. Stronger regulation may be due to a higher proportion of production that is done by foreign firms. Finally, a closely related model can account for the observed increase in prices by patent owners after entry of generic producers.

Subcontracting and vertical integration in the Spanish cotton industry

This paper examines changes in the organization of the Spanish cotton industry from 1720 to 1860 in its core region of Catalonia. As the Spanish cotton industry adopted the most modern technology and experienced the transition to the factory system, cotton spinning and weaving mills became increasingly vertically integrated. Asset specificity more than other factors explained this tendency towards vertical integration. The probability for a firm of being vertically integrated was higher among firms located in districts with high concentration ratios and rose with size and the use of modern machinery. Simultaneously, subcontracting predominated in other phases of production and distribution where transaction costs appears to be less important.

Pharmaceutical generics, vertical product differentiation and public policy

This paper studies oligopolistic competition in off-patent pharmaceuticalmarkets using a vertical product differentiation model. This model canexplain the observation that countries with stronger regulations havesmaller generic market shares. It can also explain the differences inobserved regulatory regimes. Stronger regulation may be due to a higherproportion of production that is done by foreign firms. Finally, a closelyrelated model can account for the observed increase in prices by patentowners after entry of generic producers.

Effects of convection on the removal of the multiplicity of stable states in one-dimensional vertical models

Here I develop a model of a radiative-convective atmosphere with both radiative and convective schemes highly simplified. The atmospheric absorption of radiation at selective wavelengths makes use of constant mass absorption coefficients in finite width spectral bands. The convective regime is introduced by using a prescribed lapse rate in the troposphere. The main novelty of the radiative-convective model developed here is that it is solved without using any angular approximation for the radiation field. The solution obtained in the purely radiation mode (i. e. with convection ignored) leads to multiple equilibria of stable states, being very similar to some results recently found in simple models of planetary atmospheres. However, the introduction of convective processes removes the multiple equilibria of stable states. This shows the importance of taking convective processes into account even for qualitative analyses of planetary atmosphere

States of maximum entropy production in a onedimensional vertical model with convective adjustment

We investigate the hypothesis that the atmosphere is constrained to maximize its entropy production by using a one-dimensional (1-D) vertical model. We prescribe the lapse rate in the convective layer as that of the standard troposphere. The assumption that convection sustains a critical lapse rate was absent in previous studies, which focused on the vertical distribution of climatic variables, since such a convective adjustment reduces the degrees of freedom of the system and may prevent the application of the maximum entropy production (MEP) principle. This is not the case in the radiative–convective model (RCM) developed here, since we accept a discontinuity of temperatures at the surface similar to that adopted in many RCMs. For current conditions, the MEP state gives a difference between the ground temperature and the air temperature at the surface ≈10 K. In comparison, conventional RCMs obtain a discontinuity ≈2 K only. However, the surface boundary layer velocity in the MEP state appears reasonable (≈3 m s-¹). Moreover, although the convective flux at the surface in MEP states is almost uniform in optically thick atmospheres, it reaches a maximum value for an optical thickness similar to current conditions. This additional result may support the maximum convection hypothesis suggested by Paltridge (1978)