38 resultados para vertical heterostructures
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
Report for the scientific sojourn carried out at the Paul Drude Institut für Festkörperelektronik of the Stanford University, USA, from 2010 to 2012. The objective of this project is the transport and control of electronic charge and spin along GaAs-based semiconductor heterostructures. The electronic transport has been achieved by taking advantage of the piezolectric field induced by surface acoustic waves in non-centrosymmetric materials like GaAs. This piezolectric field separates photogenerated electrons and holes at different positions along the acoustic wave, where they acummulate and are transported at the same velocity as the wave. Two different kinds of structures have been studied: quantum wells grown along the (110) direction, both intrinsic and n-doped, as well as GaAs nanowires. The analysis of the charge acoustic transport was performed by micro-photoluminescence, whereas the detection of the spin transport was done either by analyzing the polarization state of the emitted photoluminescence or by Kerr reflectometry. Our results in GaAs quantum wells show that charge and spin transport is clearly observed at the non-doped structures,obtaining spin lifetimes of the order of several nanoseconds, whereas no acoutically induced spin transport was detected for the n-doped quantum wells. In the GaAs nanowires, we were able of transporting successfully both electrons and holes along the nanowire axis, but no conservation of the spin polarization has been observed until now. The photoluminescence emitted by these structures after acoustic transport, however, shows anti-bunching characteristics, making this system a very good candidate for its use as single photon emitters.
Resumo:
This paper studies how the horizontal and vertical mismatches in the labor market affect wage. We do so by taking into account that by choosing a job, wage and mismatches are simultaneously determined. The Seemingly Unrelated Equations model also allows us to control for any omitted variable that could cause biased estimators. We use REFLEX data for Spain. Results reveal that in most cases being horizontally matched has a wage premium and being over-educated does not affect wage. Results suggest that the modeling strategy successfully accounts for some omitted variable that affects simultaneously the probability of being horizontally matched and the wage. This could explain the existence of a wage penalty for over-educated workers when the omitted variable issue is not dealt with.
Resumo:
This paper studies oligopolistic competition in off-patent pharmaceutical markets using a vertical product differentiation model. This model can explain the observation that countries with stronger regulations have smaller generic market shares. It can also explain the differences in observed regulatory regimes. Stronger regulation may be due to a higher proportion of production that is done by foreign firms. Finally, a closely related model can account for the observed increase in prices by patent owners after entry of generic producers.
Resumo:
This paper examines changes in the organization of the Spanish cotton industry from 1720 to 1860 in its core region of Catalonia. As the Spanish cotton industry adopted the most modern technology and experienced the transition to the factory system, cotton spinning and weaving mills became increasingly vertically integrated. Asset specificity more than other factors explained this tendency towards vertical integration. The probability for a firm of being vertically integrated was higher among firms located in districts with high concentration ratios and rose with size and the use of modern machinery. Simultaneously, subcontracting predominated in other phases of production and distribution where transaction costs appears to be less important.
Resumo:
This paper studies oligopolistic competition in off-patent pharmaceuticalmarkets using a vertical product differentiation model. This model canexplain the observation that countries with stronger regulations havesmaller generic market shares. It can also explain the differences inobserved regulatory regimes. Stronger regulation may be due to a higherproportion of production that is done by foreign firms. Finally, a closelyrelated model can account for the observed increase in prices by patentowners after entry of generic producers.
Resumo:
Here I develop a model of a radiative-convective atmosphere with both radiative and convective schemes highly simplified. The atmospheric absorption of radiation at selective wavelengths makes use of constant mass absorption coefficients in finite width spectral bands. The convective regime is introduced by using a prescribed lapse rate in the troposphere. The main novelty of the radiative-convective model developed here is that it is solved without using any angular approximation for the radiation field. The solution obtained in the purely radiation mode (i. e. with convection ignored) leads to multiple equilibria of stable states, being very similar to some results recently found in simple models of planetary atmospheres. However, the introduction of convective processes removes the multiple equilibria of stable states. This shows the importance of taking convective processes into account even for qualitative analyses of planetary atmosphere
Resumo:
We investigate the hypothesis that the atmosphere is constrained to maximize its entropy production by using a one-dimensional (1-D) vertical model. We prescribe the lapse rate in the convective layer as that of the standard troposphere. The assumption that convection sustains a critical lapse rate was absent in previous studies, which focused on the vertical distribution of climatic variables, since such a convective adjustment reduces the degrees of freedom of the system and may prevent the application of the maximum entropy production (MEP) principle. This is not the case in the radiative–convective model (RCM) developed here, since we accept a discontinuity of temperatures at the surface similar to that adopted in many RCMs. For current conditions, the MEP state gives a difference between the ground temperature and the air temperature at the surface ≈10 K. In comparison, conventional RCMs obtain a discontinuity ≈2 K only. However, the surface boundary layer velocity in the MEP state appears reasonable (≈3 m s-¹). Moreover, although the convective flux at the surface in MEP states is almost uniform in optically thick atmospheres, it reaches a maximum value for an optical thickness similar to current conditions. This additional result may support the maximum convection hypothesis suggested by Paltridge (1978)
Resumo:
[cat] Besley i Rosen -1998- van ser els primers autors en estimar empíricament la rellevància de les externalitats impositives verticals. Aquests autors varen fer-ho per al cas dels impostos sobre la benzina i el tabac, en concret, per al cas dels EEUU. Ara bé, no varen tenir en compte les diferències en el nivell de vida entre Estats: àrees amb un nivell elevat paguen menys en termes reals que àrees amb un nivell de vida baix, doncs l'impost unitari sobre la benzina o sobre el tabac no difereix d'acord amb l'Estat on l'impost s'aplica. En conseqüència, proposem que la competència impositiva vertical sigui estimada deflactant totes les variables monetàries utilitzant l'anomenat "House Price Index (HPI)", el qual està disponible al nivell dels Estats. Això genera una variable impositiva federal expressada en termes reals i que presenta variació entre Estats. Aquesta estratègia empírica ens permet diferenciar entre la interdependència vertical entre els tipus impositius federals i els estatals de shocks agregats al llarg del temps, utilitzant dades per als EEUU durant el període 1975 a 2006 per a benzina i tabac. Trobem una nivell significatiu de competència impositiva horitzontal, la qual és més elevada en el cas del tabac, però en cap cas reacció impositiva vertical. Els resultats són robustos al període analitzat.
Resumo:
The occurrence of heterostructures of cubic silicon/hexagonal silicon as disks defined along the nanowire (111) growth direction is reviewed in detail for Si nanowires obtained using Cu as catalyst. Detailed measurements on the structural properties of both semiconductor phases and their interface are presented. We observe that during growth, lamellar twinning on the cubic phase along the (111) direction is generated. Consecutive presence of twins along the (111) growth direction was found to be correlated with the origin of the local formation of the hexagonal Si segments along the nanowires, which define quantum wells of hexagonal Si diamond. Finally, we evaluate and comment on the consequences of the twins and wurtzite in the final electronic properties of the wires with the help of the predicted energy band diagram.
Resumo:
We report here on the growth of NiFe2O4 epitaxial thin films of different thickness (3 nm ¿ t ¿ 32 nm) on single crystalline substrates having spinel (MgAl2O4) or perovskite (SrTiO3) structure. Ultrathin films, grown on any of those substrates, display a huge enhancement of the saturation magnetization: we will show that partial cationic inversion may account for this enhancement, although we will argue that suppression of antiparallel collinear spin alignment due to size-effects cannot be excluded. Besides, for thicker films, the magnetization of films on MAO is found to be similar to that of bulk ferrite; in contrast, the magnetization of films on STO is substantially lower than bulk. We discuss on the possible mechanisms leading to this remarkable difference of magnetization.
Resumo:
Epitaxial Fe/MgO heterostructures have been grown on Si(001) by a combination of sputtering and laser ablation deposition techniques. The growth of MgO on Si(001) is mainly determined by the nature of the interface, with large lattice mismatch and the presence of an amorphous layer of unclear origin. Reflection high energy electron diffraction patterns of this MgO buffer layer are characteristic of an epitaxial, but disordered, structure. The structural quality of subsequent Fe and MgO layers continuously improves due to the better lattice match and the burial of defects. A weak uniaxial in-plane magnetic anisotropy is found superimposed on the expected cubic biaxial anisotropy. This additional anisotropy, of interfacial nature and often found in Fe/MgO and Fe/MgO/GaAs(001) systems, is less intense here due to the poorer MgO/Si interface quality compared with that of other systems. From the evolution of the anisotropy field with film thickness, magnetic anisotropy is also found to depend on the crystal quality. Kerr measurements of a Fe/MgO multilayered structure grown on Si show two different switching fields, suggesting magnetic coupling of two of the three Fe layers. Nevertheless, due to the little sensitivity to the bottom Fe film, independent switching of the three layers cannot be ruled out.