Geography of resonances and Arnold diffusion in a priori unstable Hamiltonian systems

"Vegeu el resum a l'inici del document del fitxer adjunt."

A geometric mechanism of diffusion: Rigorous verification in a priori unstable Hamiltonian systems

In this paper we consider a representative a priori unstable Hamiltonian system with 2+1/2 degrees of freedom, to which we apply the geometric mechanism for diffusion introduced in the paper Delshams et al., Mem.Amer.Math. Soc. 2006, and generalized in Delshams and Huguet, Nonlinearity 2009, and provide explicit, concrete and easily verifiable conditions for the existence of diffusing orbits. The simplification of the hypotheses allows us to perform explicitly the computations along the proof, which contribute to present in an easily understandable way the geometric mechanism of diffusion. In particular, we fully describe the construction of the scattering map and the combination of two types of dynamics on a normally hyperbolic invariant manifold.

Unstable equilibrium: young adult women in family and career formation in Southern Europe

The paper examines the relationship between family formation (i.e., living with a partner and having children) and women’s occupational career in southern Europe (i.e., Greece, Italy, Portugal and Spain). The relationship is explored by analysing the impact that different family structures and male [nvolvement in caring activities have on women’s early occupational trajectories (i.e., remaining in the same occupational status, experiencing downward or upward mobility, or withdrawing from paid work). This research shows that male involvement in caring activities does not really push women ahead in their career, but the absolute lack of male support seems to negatively affect women’s permanence in paid work. These results apply to all southern European countries except Portugal, where the absolute absence of the partners’ support in caring activities does not seem to alter women’s determination to remain in paid work. The methodology applied consists of the estimation of multinomial logit regression models and the analysis is based on eight waves (1994-2001) of the European Community Household Panel (ECHP).

Decay of an unstable state in the presence of multiplicative noise

The phenomenon of anomalous fluctuations associated with the decay of an unstable state is analyzed in the presence of multiplicative noise. A theory is presented and compared with a numerical simulation. Our results allow us to distinguish the roles of additive and multiplicative noise in the nonlinear relaxation process. We suggest the use of experiments on transient dynamics to understand the effect of these two sources of noise in problems in which parametric noise is thought to be important, such as dye lasers.

Passage times for the decay of an unstable state triggered by colored noise

We study the decay of an unstable state in the presence of colored noise by calculating the moment generating function of the passage-time distribution. The problems of the independence of the initial condition in this non-Markovian process and that of nonlinear effects are addressed. Our results are compared with recent analog simulations.

Decay of unstable states in the presence of colored noise and random initial conditions. I. Theory of nonlinear relaxation times

The general theory of nonlinear relaxation times is developed for the case of Gaussian colored noise. General expressions are obtained and applied to the study of the characteristic decay time of unstable states in different situations, including white and colored noise, with emphasis on the distributed initial conditions. Universal effects of the coupling between colored noise and random initial conditions are predicted.

Decay of unstable states in the presence of colored noise and random initial conditions. II. Analog experiments and digital simulations

The decay of an unstable state under the influence of external colored noise has been studied by means of analog experiments and digital simulations. For both fixed and random initial conditions, the time evolution of the second moment ¿x2(t)¿ of the system variable was determined and then used to evaluate the nonlinear relaxation time. The results obtained are found to be in excellent agreement with the theoretical predictions of the immediately preceding paper [Casademunt, Jiménez-Aquino, and Sancho, Phys. Rev. A 40, 5905 (1989)].

Growth of unstable interfaces in disordered media

The effects of a disordered medium in the growth of unstable interfaces are studied by means of two local models with multiplicative and additive quenched disorder, respectively. For short times and large pushing the multiplicative quenched disorder is equivalent to a time-dependent noise. In this regime, the linear dispersion relation contains a destabilizing contribution introduced by the noise. For long times, the interface always gets pinned. We model the systematics of the pinned shapes by means of an effective nonlinear model. These results show good agreement with numerical simulations. For the additive noise we find numerically that a depinning transition occurs.

Feedback control of unstable cellular solidification fronts

We present a feedback control scheme to stabilize unstable cellular patterns during the directional solidification of a binary alloy. The scheme is based on local heating of cell tips which protrude ahead of the mean position of all tips in the array. The feasibility of this scheme is demonstrated using phase-field simulations and, experimentally, using a real-time image processing algorithm, to track cell tips, coupled with a movable laser spot array device to heat the tips locally. We demonstrate, both numerically and experimentally, that spacings well below the threshold for a period-doubling instability can be stabilized. As predicted by the numerical calculations, cellular arrays become stable with uniform spacing through the feedback control which is maintained with minimal heating.

Electron scattering in isotonic chains as a probe of the proton shell structure of unstable nuclei

Electron scattering on unstable nuclei is planned in future facilities of the GSI and RIKEN upgrades. Motivated by this fact, we study theoretical predictions for elastic electron scattering in the N=82, N=50, and N=14 isotonic chains from very proton-deficient to very proton-rich isotones. We compute the scattering observables by performing Dirac partial-wave calculations. The charge density of the nucleus is obtained with a covariant nuclear mean-field model that accounts for the low-energy electromagnetic structure of the nucleon. For the discussion of the dependence of scattering observables at low-momentum transfer on the gross properties of the charge density, we fit Helm model distributions to the self-consistent mean-field densities. We find that the changes shown by the electric charge form factor along each isotonic chain are strongly correlated with the underlying proton shell structure of the isotones. We conclude that elastic electron scattering experiments on isotones can provide valuable information about the filling order and occupation of the single-particle levels of protons.

Chaotic dynamics in credit constrained emerging economies

This paper analyzes the role of financial development as a source of endogenous instability in small open economies. By assuming that firms face credit constraints, our model displays a complex dynamic behavior for intermediate values of the parameter representing the level of financial development of the economy. The basic implication of our model is that economies experiencing a process of financial development are more unstable than both very underdeveloped and very developed economies. Our instability concept means that small shocks have a persistent effect on the long run behavior of the model and also that economies can exhibit cycles with a very high period or even chaotic dynamic patterns.

Extracción de parámetros de un resonador FBAR por optimización

L’objectiu d’aquest projecte que consisteix a elaborar un algoritme d’optimització que permeti, mitjançant un ajust de dades per mínims quadrats, la extracció dels paràmetres del circuit equivalent que composen el model teòric d’un ressonador FBAR, a partir de les mesures dels paràmetres S. Per a dur a terme aquest treball, es desenvolupa en primer lloc tota la teoria necessària de ressonadors FBAR. Començant pel funcionament i l’estructura, i mostrant especial interès en el modelat d’aquests ressonadors mitjançant els models de Mason, Butterworth Van-Dyke i BVD Modificat. En segon terme, s’estudia la teoria sobre optimització i programació No-Lineal. Un cop s’ha exposat la teoria, es procedeix a la descripció de l’algoritme implementat. Aquest algoritme utilitza una estratègia de múltiples passos que agilitzen l'extracció dels paràmetres del ressonador.

Diseño de filtros con topología apilada mediante resonadores FBAR

Els continguts de la memòria es divideixen en dues parts fonamentals, precedides d’una breu explicació on s’introdueix al lector en el tema; primer s’exposen les bases d’un ressonador simple FBAR, d’on s’obtenen equacions de control vitals, i seguidament es plantegen les bases per a un ressonador apilat SCR, derivades de l’estudi previ d’un ressonador simple. La primera part fonamental del treball es centra en l’anàlisi d’un ressonador SCR. Aquest anàlisi es recolza sobre el punt de vista teòric dels paràmetres imatge, el nostre punt de sortida. Aquesta primera part és la més teòrica: obtenció i aplicació dels paràmetres imatge i obtenció dels elements discrets que conformen el circuit equivalent SCR, una xarxa de dos ports. Posteriorment, s’analitza què succeeix modificant els valors dels elements discrets sense variar determinats paràmetres imatge i finalment, es proposa una aproximació per a controlar determinades especificacions de disseny, com són l’ample de banda de transmissió de la xarxa i el factor de qualitat, en funció de les modificacions dels elements discrets. En la segona part s’analitzen, de forma qualitativa, xarxes compostes per diferents ressonadors apilats connectats en cascada. Aquest segon estudi es divideix en dues subparts. En la primera connectem N ressonadors idèntics, plantegem algunes equacions de control i analitzem les respostes. En la segona, es planteja la connexió de dos (N=2) ressonadors diferents amb freqüències de ressonància properes. Aquest segon anàlisi es també totalment qualitatiu, però ens aporta informació que amb la unió de N ressonadors iguals no aconseguíem. Finalitzant aquesta segona part, es planteja l’optimització dels resultats obtinguts per a N=2, mitjançant estructures N=3 ressonadors.

Diseño de un diplexor basado en resonadores BAW

Este proyecto plantea el diseño de un diplexor basado en resonadores BAW, pensado para aplicaciones de comunicaciones móviles. Éste permite a los terminales seleccionar los canales de uplink y downlink en sistemas que utilicen duplexado por división en frecuencia. Se plantean tres alternativas de diseño a partir de filtros implementados con resonadores BAW en una topología en escalera. Éstas serán evaluadas y comparadas considerando las pérdidas de inserción, el rechazo fuera de banda y las dimensiones de la estructura obtenida.

Metodología de diseño de filtros CRF/SCF basada en modelos de resonadores BAW acoplados acústicamente

La creixent utilització de sistemes de comunicacions mòbils ha impulsat la demanda de filtres passabanda miniaturitzats d'elevades prestacions operant en el rang de freqüències de microones. Els Film Bulk Acoustic Resonators (FBAR) estan esdevenint la principal alternativa als filtres basats en ressonadors Surface Acoustic Wave (SAW) o als basats en ressonadors ceràmics. Els Stacked Crystal Filters (SCF) i els Coupled Resonator Filters (CRF) són configuracions FBAR que permeten assolir una excel·lent atenuació en la banda de refús. Aquest treball presenta un innovador circuit equivalent elèctric que modela el CRF. Llavors, es desenvolupa una metodologia de síntesi de filtres per al SCF i per al CRF utilitzant els seus circuits equivalents elèctrics. La metodologia de disseny presentada permet obtenir les dimensions de l'estructura del filtre acústic partint de les especificacions del filtre i de les restriccions pròpies de la tecnologia. S'han implementat diferents respostes de Chebyshev per a sistemes de comunicacions reals per tal de validar el procediment de disseny dels filtres obtenint els resultats esperats.